How To Replace The Driver's Front Door Lock Actuator On A Mercedes ML350

Подписаться 212 тыс.

Просмотров 112 тыс.

50% 1

Brian Eslick from How to Automotive www.howtoautomotive.com/ takes you step-by-step through the process of replacing the the drivers front door lock actuator on a 2005-2011 Mercedes ML350 W164.
Affiliate link mentioned in the video for Mercedes-Benz 164 720 10 35, Door Lock Actuator Motoramzn.to/2jJ2O3n
Affiliate link mentioned in the video for GearWrench 80588 10 Piece Long Torx Set (T8-T50) amzn.to/2kFD73M
Affiliate link mentioned in the video for GearWrench 1/4" DR.LOCKING FLEX RATCH 7" amzn.to/2kFBR0g
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick
Category
Autos & Vehicles #howtoautomotive #AutomotiveRepair

Авто/Мото

Опубликовано:

27 янв 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@frankvillatoro2331 7 лет назад

Brian, I would like to sincerely THANK YOU for doing this awesome how-to video! I know it wasn't easy, but it covers everything needed for me to tackle this repair myself. Keep these videos coming! Awesome job!!!!!!

@HowtoAutomotive 7 лет назад

Frank Villatoro thank you I'm glad the video helped. I make between five and 10 repair videos a week. It's very gratifying to be able to help. Thank you again for watching!

@user-xz5qk4yw6w 7 месяцев назад

One of the best DYI I've seen especially for an over engineered German pia design!

@natevanderloon9060 6 лет назад

After watching this video I now know I will be paying a professional to do this job I would have never guessed it was this much work

@joehastings3508 11 дней назад

Great video...all the steps, moving at a good pace without too much editorializing. This made it easy, and it was good to learn that I wouldn't need to drill out and then replace the rivets like on some other door panels/window regulator systems. Did this on a 2006 Mercedes ML500 (w164) to replace the door lock actuator with a new (non-mercedes) ~$80 part. This is the NOT keyless-go version.

@highliner2003 Год назад

Outstanding video. I followed it and was able to replace my broken door lock actuator. It’s worth mentioning that those clips holding the harness in place break during removal, also one or two of the clips holding the door panel broke. And I have those trim removal tools. And the T20 tool needs to be long enough, I had to go get one during the disassemble process. Other than that, extremely helpful video, kudos to people like you!

@craigmcdowell8654 Год назад

I have done a couple of these and am about to start another right now. BE careful with that little silver set screw on the door handle carrier! I tightened one down to much and it broke the plastic door handle carrier. Just tighten until snug. Once it twisted off there was no going back with the replacement part! Great video and instruction Brian.

@marknewton4234 3 года назад

Super thorough and well edited tutorial. Straight to the point without over complicating things. Thanks!

@sammagna1485 5 лет назад

Absolutely fantastic step by step. Took me just over an hour with full success on the first attempt. Thank you!

@HowtoAutomotive 5 лет назад

sam magna Glad the video helped. Thank you for watching!

@mecanicaexpertyj9027 4 года назад

Brian, I would like to sincerely THANK YOU for doing this awesome how-to video! I know it wasn't easy, but it covers everything needed for me to tackle this repair myself.

@HowtoAutomotive 4 года назад

I’m glad the video was helpful I’d like to thank you for watching!

@finecutpost 3 года назад

Wow, you have put so much work into this excellent video. It's a hard enough job without filming it as well. Thank you very much.

@md6-260 Год назад

There is an important and tricky step of removing the door handle, and subsequently how to pull the whole metal cover out of the door with door lock and actuator assembly with it. It's not shown in this video.

@Aliensplaydotnecks 4 года назад

Outstanding vid, worked a treat for me, I really am impressed by both the vid and myself👍 fir attempting the job . One door down 3 to go , already save a small fortune, my issue was the very cheap actuator spring around £2.50 each here in the UK and your vid was soooo helpful I now have the courage to do the other 3, thanks again you’re a diamond , Best G.

@francescadimaggio2396 3 года назад

Very very good and professional video. Thanks

@wcarls3044 3 года назад

I always check with your site before I work on my ML ! Great video Brian !

@HowtoAutomotive 3 года назад

Thank you!

@wallydjsnr Год назад

Really appreciate this video buddy, many thanks! Unfortunately the spring was fine in mine, so I had to do the job again with a new actuator, but that worked perfect. I wouldn't have been able to do it without your help. I did seem to struggle with the 3 black clips holding the actuator to the door skin. I had to put a trim tool in behind to pull it off, and then in order to put the new one on, I used a socket on one side, and a hammer on the other, to get the black clips to push in. Hard to explain with writing, but I got there in the end. Cheers mate!

@HowtoAutomotive Год назад

Glad it all worked out. Definitely not an easy job. Thank you for watching!

@TRScully 4 года назад

This is excellent. Thank you for this pro video.

@petesmythe7987 4 года назад

Thank you very much for this video. It was a pain in the butt task but followed everything here and it all worked through. Again, we appreciate it. Me and my daughter who was assisting me.

@HowtoAutomotive 4 года назад

Pete Smythe that’s awesome that you and your daughter work together. I do the same with my girls. Thank you for watching!

@justinglen88 6 лет назад

This was an excellent video, got the job done for me, perfect video thank you

@HowtoAutomotive 6 лет назад

GP Bobcat glad the video was helpful. Thank you for watching!

@sailingsparky Год назад

Great video. Thanks much.

@ravinjugdhav5035 Год назад

Super video

@lamaterfamilias 8 месяцев назад

Lifesaver!

@_BarryD 4 года назад

Thanks for the video it really helped me ,I am having problems with that one screw for the door handle lock is there a easy way to do this I cant get it to line up ,thanks for any help or suggestions you can give me

@ianyoung6829 7 лет назад

great job brian

@HowtoAutomotive 7 лет назад

ian young thank you very much!

@finecutpost 3 года назад

Thx for the really clear video. I've refitted my replacement part and offered it up with all the cables connected yet I'm getting no response from the lock attuator. I didn't plug in the crash sensor. Any advice really welcome.

@JamesLee-dr3nq 2 года назад

thank you share information.

@bigmotor3845 6 лет назад

What a sweeeeeet video Great job!!!!!

@HowtoAutomotive 6 лет назад

Frank Cook thank you!

@eitherdiy4756 2 года назад

Thank you Sir !

@MarioHernandez-gr9bb Год назад

Great video, thanks!!!!!

@HowtoAutomotive Год назад

Thank you!

@roncalvo251 Год назад

Hi brain. I can't find the part number in your link.can you help me out. I have 2009 gl450. It looks the same ,thanks

@justinyoungstown 5 лет назад

Thank you, I am doing this job first thing in the morning at the shop. Saves me from checking alldata.

@HowtoAutomotive 5 лет назад

All data can be a pain. Thank you for watching!

@jacobwillow050 5 лет назад

This job is not for the faint-hearted, requires lots of mechanical skills to do such work. Anyways you did a very impressive step by step job. Definitely worth the hassle.

@miguelponce929 5 лет назад

Hello please i have a ml 350 2006 but i don’t know where i can find the lock actuator for the front driver the right passenger and the rear right passenger please if some one knows where i can buy them for a good price please let me know thanks

@richbayley7246 2 года назад

Hi I’m following the video to replace the handle as the keyless is not working, I cannot get the lock out out of the door to be able to remove the handle, I have taken the panel of from behind and can’t see any clips to push, the car is the ML63, am I missing something?? Cheers Rich

@BARBAQUED 5 лет назад

Thank you!

@HowtoAutomotive 5 лет назад

John Barba thank you for watching!! Did everything go smooth for you?

@angelmikoh 4 года назад

Hello Brian. I have a couple questions

@Mrdvds1 5 лет назад

This is why I work hard 4 someone else to do the work. This is alot & well worth paying someone. This video should help people understand why luxury cars cost so much to maintain. Great Video!!!

@JamesFFHarris 10 месяцев назад

Do you have any experience with a 2004 MB ML350. My computer went out and the dealer kept it for six weeks and said the AAM can't be ordered from Germany (Obsolete). It has good engine and tranny with new tires, interior is clean. Is there any hope from any where, dealer won't try any used parts. It was suggested to find all like new computers from another vehicle that was working and replace all 4-5 computers. (VIN and Keys also need to be factored in.) Is that even possible?

@HowtoAutomotive 10 месяцев назад

That’s a tough one. I recommend finding a shop that does reprogramming in your area. They may be able to help.

@abbasatlgan5467 5 лет назад

Thank you 😄

@HowtoAutomotive 5 лет назад

Abbas Atılgan thank you for watching! Did everything go smooth?

@sevhernando2671 2 года назад

Hi, do you need to disconnect the battery when replacing actuators?

@HowtoAutomotive 2 года назад

Yes

@andrewr3733 5 лет назад

is it possible the problem could just be the module?

@allenbitaye8646 3 года назад

Brian, please do I have to replace the actuator on all doors of the vehicle or just the ones that are bouncing? Please help me with this well-sought answer? Thank you.

@HowtoAutomotive 3 года назад

Just the one giving you trouble.

@allenbitaye8646 3 года назад

@@HowtoAutomotive Thank you. Both left and right front doors bounce when I press the key remote and they never lock. The driver's door doesn't even move when I press the remote. I'm trying to figure out if I need to buy the actuator for just the driver's side, or also the ones not moving when I hit the remote. Hope I'm not bothering you.