Micro USB boost converter - MT3608

Подписаться 419 тыс.

Просмотров 32 тыс.

50% 1

A 5V to 28V adjustable DC-DC step-up converter. It features a micro USB port which makes it easy to pair with a USB powerbank and create a portable adjustable power supply.
At the heart of this board is a MT3608 constant frequency step-up converter.
SUPPORT ME: If you enjoyed this video, please remember to give a LIKE and click here to subscribe to my channel - www.youtube.com...

Наука

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@ianhosier4042 2 года назад

Quite funny how these tend to release magic smoke if you input more than 6v but I only use them to convert voltages from usb adaptors at fairly low currents.

@adeyemibabatunde1814 2 года назад

@Gadget Addict How stable is the voltage when connected to the load? The voltage dropped from preset value after being connected to the load

@seanduke22 Год назад

i remember cdr king

@arunabukatha6886 4 года назад

It's not power it's current hope u know the difference between them

@pineapplepizza5733 4 года назад

could it power my pc screen off of a usb port from my pc, it needs a 19v 1.3A input

@PiratCarribean 4 года назад

Not from an usb port. 19x1.3=24.7 watts. 24.7/5=4.94 amps. So if the module was 100% efficient it would draw 5 amps from your usb port. That is not possible. An usb port can only deliver 0.5 amps. A power bank maybe upto 2 amps but not 5 amps.

@dr.sudhirranjanbhoi7565 5 лет назад

Hi... I just bought this module for charging my bike battery. While charging I noticed that the electric tester is illuminating both negative and positive terminals which is unusual. Any idea in this case???? A quick response will be highly appreciated...

@noneya96 7 лет назад

Thank you so bloody much for this video I was not sure if it would work for what I need it to plz wait for me to upload my video I can bet you have not seen what I'm going to do :)

@luckienuckie 7 лет назад

another very helpful video, thanks! is it able to power a laptop from a power bank?

@GadgetAddict 7 лет назад

It could probably charge a laptop very slowly while it's not being used. But i doubt the standard powerbank could provide enough power to charge the average laptop while it's being used.

@stinkycheese804 4 месяца назад

No, not even close. They'll shut down if you try to exceed 2A and that's input. 5V 2A input gives you less than 1A output at whatever voltage your (a typical) laptop needs. Choose a different boost converter. Also most power banks are typically limited to 3A or less so this is a secondary bottleneck.

@NitroPcb 4 года назад

Can anyone tell me what will be the value of R1 AND R2 if we want to get fixed 6.7V output not using rheostat to adjust.Input is 3.7-4.2v

@stinkycheese804 4 месяца назад

The equation for output voltage is in the datasheet, or you can just set the trimpot and then measure what it is set to.

@alexx212121 6 лет назад

Would this power two led lights both 12v? And like for how many minutes in till drain all the energy from the powerbank?

@ariesleo7396 3 года назад

Most power banks only do 2A at 5v(10watts) this board can do around 20 watts

@szatanizmo 7 лет назад

Your soldering......

@tubeseek41 7 лет назад

At 28Vdc, you'll get Amp(input) / 6

@skinnyfoodie2437 6 лет назад

What happens if I connect my micro USB charger directly instead of using a power bank?I just don't know, can somebody help.Thanks :) Would there be a heating up of my charger when adjusting the volts ?

@EdelSM 6 лет назад

i think that would work. but MT3608 is a switching device, and your charger is a switching supply also. might interfere with the MT3608 board. put a cap on the input of the board and see if it works.

@kishorekumarsahoo9859 7 лет назад

Please connect boost converter to the inverter to supply power to tv

@GadgetAddict 7 лет назад

It can't handle enough current for that.

@jhizzh2 7 лет назад

can this run in inverter set it to 12v and run 220v on it

@GadgetAddict 7 лет назад

I could try it and let you know. I doubt it would be much use because it can't handle much current. Most inverters consume 5-10W even when idle.

@jsaudio7428 7 лет назад

usefull gadget😃

@GadgetAddict 7 лет назад

Yeah It's really useful to have in your bag of gadgets :D

@androidmudalige4783 7 лет назад

thamks

@danhle1032 7 лет назад

dont you have to power on a modem too in order to have internet?

@GadgetAddict 7 лет назад

Yes, that's what we're doing in this video..

@danhle1032 7 лет назад

u called it a router...ur routers are 2 in 1 devices and serve as modems too? I have 2 separate devices

@GadgetAddict 7 лет назад

+danh le yup it's a two In one. That's pretty common for ISP supplied devices.

@parallaxerror6914 7 лет назад

what is the output current?

@GadgetAddict 7 лет назад

According to the spec sheet, up to 2A output current. But at the top end that would be 30V 2A, 60W. I have doubts it could handle that.

@parallaxerror6914 7 лет назад

if i have a supply of 5V and 1A which is 5W how can it have a 30V 2A or a 60W output?

@GadgetAddict 7 лет назад

If you're using a 5V 1A supply then obviously that wouldn't be possible. The board has input pins which you can use, aside from the micro USB port. You can actually feed in 2-24V.

@thesmashtvnetwork 7 лет назад

ware can you buy diy charger kits I'm going make a vid on how convert a rf remote to be re charger able :)

@GadgetAddict 7 лет назад

eBay is the cheapest and easiest place. Most sellers offer free worldwide delivery too. You just have to be patient waiting for the delivery. Actually it arrives in the PH pretty quickly but it can take a long time for your local post office to process it.