Mikuni BS34 Carburetor - Stripdown /Cleanup /Rebuild - Part 2 

I learn whith you.Thank you very much,my friend.

Follow up with the ball barings in the number 2 and 3 carbs. There is also a little spring that goes in before the ball bearing. I lost the springs and bearings when i seperated my carbs. Had to order new ones. Also, as far as cleaniners and degreasers go. Just keep an eye on what you use and make sure it is aluminum and brass safe. Simple green is a big no if you plan on soaking for half an hour.left in to long, will stain the aluminium dark grey. I use purple power or a very diluted simple green. Also you can use a chem dip, but make sure the carb is stripped to the bone and wear gloves. Wash off the carb immediately with warm water and dont let it sit for more then 48 hours. The brass will be discolored Good luck, i have learned alot from ur videos and they have helped me with rebuilding my 1982 kz1000j engine

Nice looking forward to the next video

Looks like You're getting a very nice finish on those bodies. Again, what cleaner are You using? Remember, You can also zinc plate the carbs, and colour them either black or silver, by dipping them in a passivating solution afterwards. I mean, if You happen to know someone with a plating tank. Anyway, good work, and thanks for sharing! 👍

What size is your ultrasonic cleaner I'm thinking of getting one but not sure what size to get,what fluid do you use.