Milwaukee M18 Trim Router and Plunge Base Tool review 

No worries at all, got to be happy with that price 👌

Yeah right, didn’t know that 👍🏻

Thanks, love your store 👍🏻

Thanks for the feedback, I haven’t got the Porter cable bushings to comment, however it does accept milescraft stuff and universal baseplates so I don’t see why not

I agree, never had a problem, easy as to use

Hey Lauren, with the first question did you want to cut a circle right through 2x4s ? If so this router is not capable of cutting the 45mm deep safely, better off using a holesaw or bandsaw You can get longer plunge bits to cut deeper, in this demo I was cutting 15mm media, I could comfortably cut to a depth of 20mm with this router and plunge base. You can also pull the router bit out a 1/3 of its depth on the shank to give you more depth but a longer bit is recommended I will do a vid on the Milescraft jig as it is a great bit of kit coupled with this router, thanks for the suggestion 😀 Thanks for watching

Maybe they mean each dot is 1/64 of an inch, that would be a total of 4/64 (1/16) per turn.

Thanks mate, they are 1/4 inch shank

@Homeonthetools thx for answer. I buy 6.35 and it's not fit. What I need to do?

@davidda7287 it should fit, when you use the collar lock (red button) use the 17mm spanner to fully unlock the collar, it has two grab points and needs to be fully loosened to fit the shank of the bit, give that a try

@Homeonthetools I took meter and it's 5.10 mm in the collet. What bit shank I need to buy?

@@davidda7287 hey mate sounds like your not having much luck, can only speak for the bits I use which are carbitool 1/4 inch shank, can get from total tools or Sydney tools if in Australia, super common size

I did shallow passes, didn’t bog at all