Mini One (2014 - 2018) - Replace the rear brake pads

Подписаться 167 тыс.

Просмотров 46 тыс.

50% 1

Do you need to Replace the rear brake pads on your Mini One (2014 - 2018) but don't know where to start? This video tutorial shows you step-by-step how to do it!
Our Mini One (2014 - 2018) manual covers the petrol and diesel engines, and includes videos for some of the most common jobs, which you can see here in this playlist. Get the full manual haynes.com/en-...
What's covered:
Petrol:
Mini One 1.2 litre (1198cc) 3-cyl turbo (March 2014 - 2018)
Mini Cooper 1.2 litre (1198cc) 3-cyl turbo (March 2014 - 2018)
Mini Cooper S 1.2 litre (1198cc) 3-cyl turbo (March 2014 - 2018)
Mini One 1.5 litre (1499cc) 3-cyl turbo(March 2014 - 2018)
Mini Cooper 1.5 litre (1499cc) 3-cyl turbo (March 2014 - 2018)
Mini Cooper S 1.5 litre (1499cc) 3-cyl turbo (March 2014 - 2018)
Mini One 2.0 litre (1998cc) 4-cyl turbo (March 2014 - 2018)
Mini Cooper 2.0 litre (1998cc) 4-cyl turbo (March 2014 - 2018)
Mini Cooper S 2.0 litre (1998cc) 4-cyl turbo (March 2014 - 2018)
Diesel:
Mini One 1.5 litre (1496cc) 3-cyl (March 2014 - 2018)
Mini Cooper 1.5 litre (1496cc) 3-cyl (March 2014 - 2018)
Mini Cooper S 1.5 litre (1496cc) 3-cyl (March 2014 - 2018)
Exclusions:
Does NOT cover 2.0 litre turbo-diesel, or Clubman, Countryman, Convertible, or John Cooper Works (JCW) versions.
Does NOT cover ‘Mk 2’-based models (Paceman, Roadster, Coupe) or facelifted ‘Mk 3’ range introduced March 2018.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@mikebillett7935 Год назад

As a long time fan of Haynes Manuals (Dad has an impressive collection) I now work writing repair methods for a vehicle manufacturer and really appreciate how clearly you presented this. 10/10

@HaynesManuals Год назад

Thanks

@dennisblack6042 2 года назад

Follow up. I did finish the rear brakes on my ‘18 4 dr S model. I was unable to reset the ‘brake’ fault warning however after reusing old sensor. Your results may vary, but save the hassle, and the extra shipping charges, and order sensor with brake pad kit. Only 10-20$. Worthwhile. It is impressive, and idiotic, that BMW has managed to create disposable sensors. The copper clip came off mine when I removed sensor, and apparently causes the sensor to fail, even when replaced. Easy job overall and this video is spot on.

@HaynesManuals 2 года назад

To be fair to BMW, they do say that the sensors can't be reused. If they're not worn through, it may be possible to get the old clip to work again, but for the small extra outlay, is it worth it?

@dennisblack6042 2 года назад

@@HaynesManuals I agree. And yes, it is a small outlay. And yes, when you buy a “bmw”, you are buying every single sensor and electronic gizmo in the world, which will increase maintenance costs. New cars are designed to be taken to the dealer by people who are not interested (or capable) in DIY. Thank you guys and ladies at Haynes for helping shadetree mechs like me to do some things ourselves. A Learning process for sure

@mikebillett7935 Год назад

…or if you are in the middle of the desert, you can cut the sensor pad off and twist the wires together, when the circuit is complete it thinks all is good, no more brake wear warning light, so keep an eye on them. Disclaimer: (cough) I would NEVER do it this way

@WeAreN1nja 11 месяцев назад

Thanks for posting this. Completed the swap with zero hiccups. Gonna purchase the manual just to show my appreciation.

@HaynesManuals 11 месяцев назад

Glad it helped

@GHOOGLEMALE 3 года назад

First class explanation - Are the Haynes manuals now digital like this, so much easier than interpreting the written manuals (ie see section 1 for jacking, section 4 for brake reservoir, section blah de blah. This way its all in context and easy to follow.

@BRUNOCMUSIC 2 года назад

Such an amazing content!! do you guys have this procedure for the F56 cooper? thank you so much!

@HaynesManuals 2 года назад

Not at the moment, but we'll bear it in mind - thanks!

@seand9882 Год назад

Isn't that an F56? I know my 2017 Cooper S is an F56🤔

@caseymccombie2713 Год назад

F56 is exactly the same as this

@joshuameyers3087 Год назад

What size brake pads are these?

@foxfritter4389 3 года назад

What's this about the sensor needing to be renewed?

@HaynesManuals 3 года назад

In order to replace the brake pads, the wear sensor (where fitted) must be pulled from the pad backplate. BMW/Mini insist that once the sensor is removed, it must be renewed. I believe this is because the clip that retains the sensor is distorted during the removal procedure, and therefore will not securely retain the sensor upon refitting. BMW/Mini don't supply the clip as a separate item. However, if the sensor is worn (activating the light on the dash), the sensor must be renewed anyway.

@aarongrisham5555 3 года назад

It's for extra revenue. Nothing more

@dennisblack6042 2 года назад

@@aarongrisham5555 aaro, does this mean you have reused sensors with success on the Mini? I have on bmws but yet to try on this Mini

@aarongrisham5555 2 года назад

@@dennisblack6042 yup

@dennisblack6042 2 года назад

@@aarongrisham5555 I will find out tonight. Doing rear brakes on an 18 and dont have the sensors. Thanks

@carolynhughes3290 2 года назад

Your website seems to only have stuff for gen2 minis?

@HaynesManuals 2 года назад

We've produced manuals for most variants of Mini from 1966! Pre-2001 are hard copy printed manuals only.

@tokuzumi1 Год назад

Is there any trick to lining those two pins on the inside pad with the dimples on the caliper piston? I spent 90 minutes wrestling with that. Bought the tool to rotate the piston back into the caliper. New pads wouldn't fit over the rotor. Ended up having to just slap on the old pads, and I'm going to take the car to a shop. Pretty disheartening, considering it's $700 to replace at a shop, and I bought the parts for $150. I've replaced numerous pads and rotors previously, and never had issues until working on German cars. It's like automotive knowledge gained throughout life doesn't help when working on German stuff.

@HaynesManuals Год назад

According to the manual, there's no requirement to align any pins on the inner pad with the cut-outs in the piston face. The cut-outs are there to aid piston retraction. Make sure the pad with the bulge in the backing plate is fitted to the inner location.

@zacharyflack5620 2 года назад

Will this tutorial also work for an F56 mini cooper?

@HaynesManuals 2 года назад

Yes

@giannimini3293 3 года назад

hi i have your book but i can't find the torque for the hex bolt whit washer (m12x1.5x33)from the calliper carrier for the rear brake (i see in the book 30 nm + 90° is correct ?) thank for your reply sorry for my english

@HaynesManuals 3 года назад

Yes, that's the correct figure

@giannimini3293 3 года назад

@@HaynesManuals thank a lot