amzn.to/2UWlUHM - Sil Glyde
amzn.to/3ehfoTB - Milwaukee M12 3/8" ratchet
amzn.to/2YcsKe6 - 3/8" Dr 17" Long reach ratchet with flex-head
amzn.to/2C1fm3O - Rear Brake Pad Wear Sensor that I ordered and put in later
amzn.to/2NNR40c - Rear Disc Brake Caliper Compression tool
amzn.to/3eqlkJS - GearWrench Torque Wrench 85062
Just another video on how I replaced the rear brake pads & rotors on a 2014 Mini Cooper.
This really wasn't a difficult job once we had the correct parts. This vehicle was manufactured in March of 2014, the manual in the glove box says 2014, the title says 2014, and the Vin decoder online says that it was a 2014 Model. The local parts stores had a hard time finding the correct brake pads and sensors for this vehicle because they said it's probably not a 2014 model. We were able to finally find the ones we needed by looking up the parts for a 2015.
Tools needed:
14mm wrench and/or socket
17mm Thin profile open end wrench
E14 Reverse Torx socket
6mm allen wrench or hex key
10mm socket
large flatblade screwdriver
torque wrench
Caliper wind back compression tool
Brake grease
Wire brush
Brake cleaner
Torque specs that I found online:
19 ft. lbs for the small allen bolt that attaches the rotor
48 ft. lbs for the larger caliper bracket bolts
25 ft. lbs for the caliper slide pin bolts
Here is a link to the video for the front brake pads & rotors on this same vehicle:
• 2014 MINI COOPER - HOW...
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
"X-ray Vision" by Slynk
As an Amazon Associate I earn from qualifying purchases.
11 сен 2024
