MINIWARE MHP50 Mini Hot Plate Preheater 50*50mm review 

This time we have something nice, it's always nice, Sorin 🤣🤣🤣 because we get a video 👍

Brilliant review that looks sick I will get one for sure, thanks Sorin😊

Very nice, another tool in the bag, Thanks!

Great method ! I'll be sure to try that next time I have a connector to replace.

Thank you for your review.

Thats a great product!! Great! Thx Sorin!! ☺

I have looked at the smaller version in the past but I am uncertain how well such a “flat plate” pre-heater would work when dealing with populated double sided PCB’s such as a laptop PCB. The bottom side components would hold the PCB away from the heater plate. My preheaters all use either hot air flow (from below) or Infra Red radiant heat (from below). Those are not affected by the components mounted on the bottom side of the PCB. It would be interesting to see how well this unit works on a multi layer laptop PCB that has large components in contact with the preheater plate (creating a small stand-off from the actual PCB). An interesting product for sure but if they had incorporated a matrix of air holes in the heater plate and (or option for) a small (low flow) air pump, it would be more versatile. This is what PACE did on their plate type preheater. Thank you for the review Sorin 👍👍

Damn, now I need to buy it, I have MHP30 but this one looks really nice.

Awesome tool!!!👍

I used to do the same thing with the cloths iron the only issue it take longer and u need to put it o a kind of support

Would definitely come in handy for COB LEDs. 🤔😊 Though spending 120 € for it... I don't know. I could get myself a 5/10 € regular portable kitchen single plate cooker & use it. 🤔😕🙄

nice i love the tool

very nice tool!

i made one by myself with a straightener, and work fantastic to replace smd components

If it works by conduction of heat then limited by shapes and positioning of parts on board, right? What if there's a big lot of parts on the underside?

U can keep your coffee hot if u put your cup on it lol

I like sorin because he give you pure honest information you are the best.

very nice

Can you really use something like this with phone boards? I mean those boards are packed with components on both sides, and you can't stuff a side full of ICs and metal cans towards the hot plate can you?

What sort of camera equipment are you using that lets you zoom in so quickly and accurately?

Damn. I didn't even know this was an option!

Oh, wow, didn't know I wanted something like this (didn't even know it exists). I always tried to avoid SMD soldering (even if just reflowing single pins), but this makes it look like a breeze.😮

Maybe now you'll show us a successful CPU replacement... Just for the show! Between 2 similar spare motherboards from your pile...

Which camera you said that you have??

Greetings from Mexico 🎉 nice working sorin but video it’s blackout

I can't wait you using it phone board repairs

Very nice tool. Iv seen it before. I’m wondering how this works if you have components on both sides.

this tool only can be used for oneside type of mainboards

Sorin, too hot and you kill your magnet!

I just got one of these a couple days ago. I found that if I use USB-C with a 100W GaN Rocoren PD charger it will continuously reboot. If I use a 60W cable, or force the 100W cable to 3Amp (so 60W) it runs fine but at lower wattage so much slower to heat up of course. Also runs fine using the DC port at over 120W. I'd be interested in hearing from others that have used this product with 100W USB-C cable and power source as to what worked or didn't. Thanks.

Great for mobil phone repair.

I have their smaller version and I'm sorry I bought it. If you solder a lot of boards with no components on the other side, then it works well, but usually there's some reason you can't lay it on the heat plate. I just mask off areas and use hot air.

Wow!

DAS CRAZY !!!!!!!!!!

Please please, make a video about yourself that how you have become a Hardware Technician??? Thanks

Can you cook sarmale with it? If you can't I am not interested.

Can you try it with PS5 HDMI connector and see if it can desolder the connector? or make pancake on it :)

you might as well cook noodles on it 🤣🤣🤣🤣🤣🤣

thay are quite expensive to buy

woow .. and what you do when you have underfill ... ohh .. its useless .. domage ! but nice tool to have around still ..

Why not try an actual board....hmmmm.

in real works, no..sorry

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣