MJJC Foam Cannon Pro V1 vs V2 - Is the new one better?

Подписаться 1 млн

Просмотров 37 тыс.

50% 1

MJJC Foam Cannon Pro V1 vs V2 - Is the new one better? I do a comparison between the old and new versions of the MJJC Foam Cannon Pro to see if the new version lives up to the brand’s claims for thicker foam. Also, we compare them to the TriNova, Griot’s Garage Brilliant Finish and MTM PF22.2 foam cannons!
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOr...
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
MTM PF22.2: bit.ly/3ppTFPI
MJJC Foam Cannon Pro v2: amzn.to/47sSzak
TriNova foam cannon: amzn.to/3CdeOE9
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YkTEwZ
Chemical Guys Big Mouth Max Release Foam Cannon: amzn.to/3YoCIpF
Adam’s Mega Foam: amzn.to/3fWtHAg
Kranzle 1122TST pressure washer: bit.ly/3d5kZeK
Kranzle 1122TST plus upgraded Mosmatic gun and wand: bit.ly/3vj0Zzz
Mosmatic gun and wand solution: bit.ly/3aA67oE
Other good pressure washers: bit.ly/3M8J32M
Phoenix EOD Apex Auto Wash shampoo: amzn.to/43OGTNA
CR Spotless water deionizer system: bit.ly/3AMsMKf
🇨🇦 For people in Canada:
MJJC Foam Cannon Pro v2: bit.ly/3ltOq3r
TriNova foam cannon: amzn.to/3KxSJF2
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/2W4vqMA
MTM PF22.2: bit.ly/3pqcQsR
Kranzle 1122TST pressure washer: bit.ly/3MgYINZ
Mosmatic gun & wand solution: bit.ly/3EBUZbI
Other good pressure washers: amzn.to/3ZIXtw6
Phoenix EOD Apex Auto Wash shampoo: bit.ly/3HXst6p
CR Spotless water deionizer system: bit.ly/3iRQ8bd
🇬🇧 For people in the UK:
MJJC Foam Cannon Pro v2: bit.ly/3A7BFzv
MJJC Foam Cannon on Amazon UK: amzn.to/3Gj641H
MTM PF22.2: bit.ly/3AB0Bkh
Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3cpoleD
Phoenix EOD Apex Auto Wash shampoo: bit.ly/3nCV2O6
🇫🇷 For people in France: c3po.link/Qu6F...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Using a foam cannon is a technique from the pre-wash stage where you blanket the vehicle with a layer of snow foam, to help lift and encapsulate loose dirt and debris before you do the contact wash. This method is to reduce the chances of getting swirls and scratches in the paint.
✅ Foam Cannon Battle video: • FOAM CANNON BATTLE !! ...
✅ How to use a foam cannon + TriNova review: • FOAM CANNON CAR WASH T...
✅ Foam cannon (pressure washer) VS foam gun (garden hose): • Foam Cannon VS Foam Gu...
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicso...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on RU-vid, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganize...
🎥 List of equipment I use to produce my RU-vid videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganize...
🎶 Intro music by Hurley Mower
/ hurleymower
#MJJC #FoamCannon #V2 #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

Авто/Мото

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии

@PanTheOrganizer Год назад

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: MTM PF22.2: bit.ly/3ppTFPI MJJC Foam Cannon Pro v2: amzn.to/47sSzak TriNova foam cannon: amzn.to/3CdeOE9 Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3YkTEwZ Chemical Guys Big Mouth Max Release Foam Cannon: amzn.to/3YoCIpF Adam’s Mega Foam: amzn.to/3fWtHAg Kranzle 1122TST pressure washer: bit.ly/3d5kZeK Kranzle 1122TST plus upgraded Mosmatic gun and wand: bit.ly/3vj0Zzz Mosmatic gun and wand solution: bit.ly/3aA67oE Other good pressure washers: bit.ly/3M8J32M Phoenix EOD Apex Auto Wash shampoo: amzn.to/43OGTNA CR Spotless water deionizer system: bit.ly/3AMsMKf 🇨🇦 For people in Canada: MJJC Foam Cannon Pro v2: bit.ly/3ltOq3r TriNova foam cannon: amzn.to/3KxSJF2 Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/2W4vqMA MTM PF22.2: bit.ly/3pqcQsR Kranzle 1122TST pressure washer: bit.ly/3MgYINZ Mosmatic gun & wand solution: bit.ly/3EBUZbI Other good pressure washers: amzn.to/3ZIXtw6 Phoenix EOD Apex Auto Wash shampoo: bit.ly/3HXst6p CR Spotless water deionizer system: bit.ly/3iRQ8bd 🇬🇧 For people in the UK: MJJC Foam Cannon Pro v2: bit.ly/3A7BFzv MJJC Foam Cannon on Amazon UK: amzn.to/3Gj641H MTM PF22.2: bit.ly/3AB0Bkh Griot’s Garage Brilliant Finish Foam Cannon: amzn.to/3cpoleD Phoenix EOD Apex Auto Wash shampoo: bit.ly/3nCV2O6 🇫🇷 For people in France: c3po.link/Qu6FkUYM22 ✅ Foam Cannon Battle video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wF5pDPE7vr0.html ✅ How to use a foam cannon + TriNova review: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qo2WQPRF-Ws.html ✅ Foam cannon (pressure washer) VS foam gun (garden hose): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rJPk8nR8Ib0.html

@michelnantel3439 Год назад

Bonjour je me demandais a quand en français? Merci

@PanTheOrganizer Год назад

Il m'est rendu impossible de produire des versions bilingues pour chaque vidéo malheureusement. Une seule vidéo peut prendre 10 à 15 heures à produire, alors tout recommencer en double à chaque fois est impensable. Aussi, 90% de mes auditeurs sont anglophones, donc mettre 100% d'efforts et d'énergie pour 10% des résultats en français n'est pas viable. Il faut garder en tête que je ne suis pas le seul RU-vidur à parler plus d'une langue, et pourtant, je suis le seul à produire des vidéos bilingues. Ça démontre à quel point ce n'est pas aussi facile qu'on pense produire des vidéos RU-vid. C'est la chose la plus difficile que j'ai faite dans ma vie bâtir cette chaîne. Un effort surhumain de plus de 7 ans pour se rendre à ce point. Je n'ai jamais manqué une seule semaine d'afficher des vidéos depuis la création de ma chaîne. Ceci étant dit, je continuerai à produire des vidéos françaises lorsque possible. Merci de ta compréhension.

@alanhefter4659 Год назад

I have version 1. Works great. I agree the new version lays it down thicker but not enough of a difference for me to buy the new version.

@JustProAutoDetailingInc Год назад

Hi Pan. I’m the retired CPD officer you met at the Bays in Romeoville. Nice demo. I went down the same rabbit hole as most detailers seeking the greatest foam. One of my oldest cannons finally bit the dust and I have the excuse I need to buy the new model. Thanks!

@PanTheOrganizer Год назад

I absolutely remember you Keith! I hope you're having a great day.

@randybecker7339 Год назад

This is a very impressive improvement! My first thought was the rear of the car might have had some more road film due to being the rear of the car but the hood demo dispelled that right away. They may have overstated some of the benefits of the newer model but they sure made some significant improvement in sheer volume and richness of foam!

@feeldafury Год назад

I just started detailing my own car 2 months ago. I got the triniva foam cannon, it was very runny. I picked up MJJC 2.0 a month ago. It was night and day comparison. I returned the Trinova back to Amazon. I love the video you put out, Pan. Thank you for all the tips and demo you do.

@PanTheOrganizer Год назад

Thanks! Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@ralphyibanez Год назад

Hi Pan! Thanks for all your videos. I'm a mobile detailer and learned a lot from your vids. I recently bought the MJJC Pro 2 and it's amazing. Absolutely no need to look any further as this will be my go to foam cannon. Keep up the good work!

@PanTheOrganizer Год назад

Thanks Ralph! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@ralphyibanez Год назад

@@PanTheOrganizer About a year ago i wanted to start a business here in The Netherlands. I found a random video about car detailing and just by searching for advise about products, tools and equipment I found your chanel. The detailed information was, and still is, very helpfull.

@PanTheOrganizer Год назад

😁👍🏻

@cgraham6 Год назад

My first cannon was the Griot's brilliant finish based on the last comparison video, but it never worked right, even right out of the box. All it would ever produce was soapy soup. I probably should have sent it back, but I replaced it with the MJJC v2, based on JoshV's claim that it was the best foam cannon he had ever used. It didn't disappoint. Good to see that it's a definite improvement over the v1 unit.

@OCDaddyZsolt Год назад

Hi Pan, the claims on the box are compared to the standard Foam Cannon S (not the S v3.0) and the standard Foam Cannon Classic. If you have the box of the Pro v1.0 yet, you’ll see the same claims. So the claims on the box of Pro v2.0 are the same as on the Pro v1.0. In the meantime, they’ve released an S v3.0 (not Pro v3.0), which costs the same and performs the same, but have a few differences (colour, the bottle etc.). Tested those compared to each other, in case you are interested. One more thing about the latest Pro v2.0 (which technically should be v2.1, as they’ve made changes to the original v2.0 also): They don’t include the metal mesh anymore, as according to MJJC, you don’t need the spare anymore, just need to run clean water through, when you finished using it. The Foam Cannon Pro is my absolute favourite for some time :) Thanks for the review ;)

@PanTheOrganizer Год назад

Thanks for sharing this info!

@stephendockeney Год назад

I'm still rocking the Griot's and after a year of weekly to bi-weekly washes it is still going strong! Love it!

@PanTheOrganizer Год назад

👍🏻

@keagandevilliers2832 Год назад

just bought v2 to upgrade from an old no name cannon. thanks to your videos. can’t wait for a break in the rain to try it tomorrow

@PanTheOrganizer Год назад

Thanks Keagan!

@404notfound..... Год назад

Definitely more foam on version 2! These are definitely good units. Great video pan!! 👍🇨🇦

@PanTheOrganizer Год назад

Thanks!

@KonstaNykanen Год назад

I was actually surprised how much thicker the foam was on the version 2😯. If I was on the market for a higher end foam cannon, the MJJC V2 would definitely be on my list of potential foam cannons to buy👍🏻. Great video Pan!

@PanTheOrganizer Год назад

What's your current foam cannon?

@KonstaNykanen Год назад

@@PanTheOrganizer My current foam cannon is by Autoglym, a british manufacturer, I bet you've heard of them. They also make other detailing products, waxes, sealants, the whole nine yards.

@PanTheOrganizer Год назад

Yes they are popular in the UK.

@MatthewSmith-ly8lp Год назад

I bought V2 based on a previous review you had done. I love this product. It works great. Thanks! My mustang PP2 loves this

@PanTheOrganizer Год назад

Thanks for sharing your personal experience with it Matthew! What is your go-to snow foam?

@allforluxury.details Год назад

When I just got the V1 just yesterday 😢

@martincorriveau Год назад

You are fine with V1, you will still get the same result in hte end. The car will be clean.

@PanTheOrganizer Год назад

No worries, you got a food foam cannon.

@chrisshipe8790 Год назад

I bought mine 2 months aga😅

@PanTheOrganizer Год назад

If you bought it two months ago, shouldn't you have the new version? The 2.0 was released last year.

@ocddetailer Год назад

Always happens! 🙄 it’s a really good cannon I just hate how much it leaks

@yvesst-jacques3989 Год назад

I have the V2 and love it, lots of creamy foam, truly love it 😉👍 if one day I have to change it, I'll probably go with V3 or what's version they're up to, love the big opening to put soap in it, MJJC all the way 😀

@PanTheOrganizer Год назад

Thanks for sharing your experience Yves!

@dannydaugherty5702 Год назад

I’m actually in the market for a new foam cannon so this video hits right at a good time! I have seen the first version on some other detailing videos AndRem Details used one ☝️ and get great results with his. So informative my friend 👏I always look forward to any of your new uploads. Thanks for testing these products out for us to watch!👍

@PanTheOrganizer Год назад

My pleasure! And thanks for your continued support Danny.

@dannydaugherty5702 Год назад

@@PanTheOrganizer Hey I’m your number one ☝️ fan ☝️😂

@PanTheOrganizer Год назад

Let's go!

@zachmulharan9507 Год назад

I bought a V2 a few months ago and it works like a champ. I highly recommend it.

@PanTheOrganizer Год назад

Thanks for sharing your experience Zach.

@LoudModeOn Год назад

The best just got better. Have both, always loved the V1 but the V2 is awesome. Used the MTM for a while, the small mouth was annoying, the metal top on the plastic bottle would constantly overscrew, and the foam quality was less consistent than the MJJC which gives thick, rich foam every single time. MJJC all the way for me! Apparently the new V3 S model has a quick release cap and the same workings as the Pro V2. Might be worth checking that one out if you haven't yet Pan.

@PanTheOrganizer Год назад

Thanks for sharing

@ZeeshanKhan-tj2wh Год назад

I was looking forward to buying the MJJC foam cannon and was thinking about either V1 or V2 and was pretty confused but then I said to myself that Mr. Pan would definitely have a video on this topic and I wasn't disappointed. Now I've made my decision for going with the V2 and I will also share my experience as I have a low bar pressure washer and have struggled with the quick connectors for it because these parts are hard to come by in Pakistan. Again, awesome video. Much love to you Sir and you have educated me alot. Thank you.

@PanTheOrganizer Год назад

Thanks Zeeshan!

@lisakaye75 Год назад

I have the MJJC version 1. Very happy with it. I also have the one made in Italy. I love them both. I may give my brother in law MJJC version 1 and buy version 2 for myself. He doesn't have a foam canon so I know he would appreciate it.

@PanTheOrganizer Год назад

Right on

@georgep.9498 Год назад

Yasoo Pan!! I had bought the Griot’s foam cannon after seeing your review on it. I am extremely satisfied with it but the only issue I had was with the weighted ball. It started rusting after the third or fourth month of use but still makes great foam.

@PanTheOrganizer Год назад

What snow foam were you using in there?

@dandezz Год назад

Un autre banger Panner.. Lately, I've been turning my dial to a runnier setting for the first time around the vehicle, let dwell 1-2 min, then turn the dial to a "shaving cream" setting and foam it thick before washing and voilà ,all clean..

@PanTheOrganizer Год назад

👍🏻

@bobbyjones2112 Год назад

I’ve got version 2.0. I also had the Adams premium foam cannon which I thought was really a good build quality too!😂

@PanTheOrganizer Год назад

Which is your favorite one?

@bobbyjones2112 Год назад

@@PanTheOrganizer I like the MJJC Pro V2! Adams premium is my second favorite for sure!

@stephenjames6534 Год назад

I have the version 2 and find it brilliant. Only issue is i had a pin sized hole in the brass but soon fixed with a blob of hot glue. Great video pan, greetings from the uk.

@volvo09 Год назад

That pin sized hole is to allow air in as the container empties, so that it doesn't create a vacuum. Edit: Oh you said in the brass, I was thinking of my foam cannon with a brass base. This one has a plastic base. Weird

@stephenjames6534 Год назад

@@volvo09 yeah, it suddenly appeared and was spraying a fine mist of water all over my face when I used it. The glue worked a treat 😁

@volvo09 Год назад

@@stephenjames6534 hahaha! That would be annoying!

@PanTheOrganizer Год назад

Thanks for sharing

@michaelm1739 Год назад

Pan I am still surprised that MTM has not gone to a wider opening on the bottle. Again an informative video Thank you

@PanTheOrganizer Год назад

I am still waiting for them to produce a wider moth version too.

@richardseem7948 Год назад

Still love my tri nova. Totally agree with ur choices and comments on mtm.actually got my mtm with their stubby 4 100 bucks during last holiday season was a steal and bought it

@PanTheOrganizer Год назад

Yes that's a great foam cannon too.

@pasqualepisani Год назад

I have version 2 and I swapped into the smaller orifice. It works great and I’ve never tripped my 15 amp breaker

@AVSVALETINGDETAILING Год назад

Have them all including Mtm. My opinion the Mjjc v3 is the winner. Thick foam. Did I say thick foam I mean it’s unbelievable compared to Mtm. The quarter turn neck is an absolute magical to use. and clear bottle, great to see clearly and no discolouration on the clear bottle, even high alkaline stored hasn’t discoloured or staind it 10/10

@PanTheOrganizer Год назад

Thanks for sharing your personal experience Aaron!

@davestewart9146 Год назад

I have the MJJC V2, awesome foam cannon, I had lost one of the little red plugs in the lid while cleaning it, I’m not sure what they do but I just ordered more from MJJC, after they arrived my son looked down on the garage floor and found it lol, I don’t remember but the unit may come with extra red plugs, oh well I have extra lol, great comparison Pan, thank you 😁👍

@PanTheOrganizer Год назад

Thanks Dave!

@stewartherbert6847 Год назад

Hi pan just a short note I have done a couple replays from when you sent one to me all the best Stewart wrote a few things down that I didn't want anyone else to see 👍

@josephdefreitas56 Год назад

As usual Pan does an amazing job with the unbiased comparison of the MJJC V2 . Can't believe the ugly steel rims on the car though😀 I do have a question. Wouldn't the V1 with the more runny foam help to dislodge the dirt on the car better than if the foam is "sticking" to the panels?

@PanTheOrganizer Год назад

Hehe those were just the winter wheels. A popular option in Canada, to avoid damaging the nice summer wheels. As far as the debate of runny vs thick foam, that's up to you to decide. ;)

@amoni1959 Год назад

Never tried V1 or V2 but I picked up the V3. It’s freaking sweet.

@bartjeuhh790 Год назад

There's no Pro V3 out yet, you're referring to the S series which is incomparable.

@robertrobertson5120 Год назад

Thanks for the comparison pan... good visual demonstration!

@PanTheOrganizer Год назад

Thanks Robert!

@TheBreakfastLover Год назад

I strongly recommend a 1.35 orifice to avoid tripping a breaker/blowing a fuse if you only have 15 amps. It still makes tons of foam.

@coreymerritt7742 Год назад

Thanks pan I recently purchased the mjjc ver2 from Carrzilla a month ago on sale will be using on the truck and trailer this weekend great video 👍

@PanTheOrganizer Год назад

👍🏻

@tennesseefarmboy1536 Год назад

Love this foam canon. Wish they would have done something different with the twist knob. Made it click in place when you adjust the amount of foam that comes out.

@PanTheOrganizer Год назад

Thanks for watching!

@kenh733 Год назад

I was going to order the Mjjc but was going to take a month to get it so I got the Groits Boss and it works great, I did put in the smaller oriface that comes with it because I have a small 2300 psi electric pressure washer

@ShineYourLightDetailing Год назад

Hey Pan, quite impressive improvement! I noticed in the description the hyperlink for Phoenix EOD Apex Auto Wash isn’t there like the other products. Could you add it in? Thanks so much appreciate all you do for everyone’s benefit. 🙌🏼🙌🏼🙌🏼

@PanTheOrganizer Год назад

I missed that! Hehe thanks for the reminder. I added the link.

@billarmstrong7910 Год назад

Got MJJC Pro 2 and teally love it

@PanTheOrganizer Год назад

Cool!

@DSJ714 Год назад

both produced amazing foam to get the final results of nice clean paint

@PanTheOrganizer Год назад

Thanks for watching David!

@the_jnlt_channel Год назад

Ive got the Pro V2 but also the S V3.0, which i found the internals to be the same. At least you can see that they did make a change from V1 to V2 👍

@PanTheOrganizer Год назад

Yeah it seems to me that V2 vs the regular S V3 is mainly about the bottle difference.

@the_jnlt_channel Год назад

@@PanTheOrganizer yeah definitely looks that way. Not sure why but I keep going back to the Pro V2 tbh.

@danidetailbn Год назад

What a difference. But they both do look good. Nice one Pan!

@PanTheOrganizer Год назад

Thank you! Cheers!

@functionaldoc5054 Год назад

Please do a foam show down with MTM and the MJJC Foam Cannon Pro V2.

@neilwalker5041 Год назад

This is a fun video as everyone loves foam. V1 puts out the foam I prefer but V2 should be able to match the consistency of V1. The open mouth and ball at the end of the straw are nice features. I personally use the MTM and it works well and the parts are easy to replace. The mouth is way to small as I have to use a funnel to poor in the soap. Thank you for a fun video and I hope your avoiding all the smoke. We have some smoke here in Nashville and it does leave my cars a mess.

@PanTheOrganizer Год назад

Fires are raging in many forests in North America. :( Yeah I love my MTM too. I wish they’d come out with a new version with a wider mouth.

@tc9148 3 месяца назад

Outstanding review and comparison. The MJJC Pro V2 is so impressive. The link is to a Swift brand foam cannon so is that incorrect?

@PanTheOrganizer 3 месяца назад

It's essentially the same foam cannon (as the MJJC isn't available on Amazon). They did a release a newer one available on Amazon, the MJJC Foam Cannon S v3.0 here: amzn.to/3QBzqOG I reviewed that against the Pro v2 in this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-L-3608MjklU.htmlsi=t-FoC_4RDouJ6gZw

@stephenlouden480 Год назад

they should've incorporated the top from the MJJC S V.3.0 that only needs a qtr turn to lock not really any threads to strip so it'll never break. that's the one I use. mjjc S v 3.0. I love it

@PanTheOrganizer Год назад

I'm sure they'll come up with version 3.0 of the Foam Cannon Pro soon.

@cleancarchris Год назад

Never tried these cannons before..still using my MTM 😃

@Djscanzi Год назад

if the foam is runnier on 1.0, wouldnt it be removing more stuff from the bodywork since it well... is runnier ? the v2 kinda just sticks.... hmmm...

@TheCarDetailingChannel Год назад

The 2.0 is still my favourite foam cannon

@PanTheOrganizer Год назад

It's very good.

@damienwilliams4306 Год назад

You convinced me to get 1.0 3 years ago, and I'm convinced I want 2.0 lol

@PanTheOrganizer Год назад

They are very good foam cannons indeed. But the competition is red hot!!

@johngross1952 Год назад

The company raised the price by 10-12 US dollars since your videos. I don't know if it's worth it. I love my Griots foam cannon that I got on your recommendation!!

@frankb7449 Год назад

Is thicker foam necessarily better? I sort of like how version 1 is a little runnier since I usually do a foam pre-wash before rinsing and doing a contact wash. Does the runnier foam drip more grime off the paint than the thicker foam which just sits there???

@PanTheOrganizer Год назад

Some people like runnier foams, some like thicker foams. Up to you to see what you prefer, according to which snow foam you are using.

@mr.mephistopheles2497 Год назад

Thanks again Pan, I spent the extra on version two and it's nice to see it validated.

@PanTheOrganizer Год назад

Thanks for watching!

@rivakhoffman4825 Год назад

Great comparison! I’m purchasing version 2.0. Always OCD about thicker foam. Hey this looks like Andy’s car! Where the heck is Andy today?? 😂

@PanTheOrganizer Год назад

That's not Andy's vehicle. He drives a Mazda CX-5. The vehicle in the video is my girlfriend's Nissan Rogue.

@ddautodetailing Год назад

I have the v2 and the new S v2, both are great and produce nice foam. I like the thicker foam as it lets me get around the car while there is still some soap on the panels.

@PanTheOrganizer Год назад

👍🏻

@JoelSc14 Год назад

is the s v2 similar to the new pro v2 ?? (i have the s v2 now) as far as foam production, or close enough ?? the s v2 seems nice, 1.1 installed for a ryobi, i'll swap if i use it on my gas one.

@ddautodetailing Год назад

@@JoelSc14 The S v2 does have its differences. I have a video of it on my channel. I really like the quarter turn for the head of the unit to the bottle. The foam output is just as good as well.

@JoelSc14 Год назад

@D & D Auto Detailing so foam is similar with the s v3 and pro v2 ?? Thanks 🙂

@ddautodetailing Год назад

@@JoelSc14 yep! Foam is just as good from my experiences 👍

@Snarkattack01 Год назад

So I have the MJJC 2.0, The MTM &, I also have Adams standard foam cannon the first foam cannon that I purchased because I was cheap and I was first starting out. Now I use my MTM’s faithfully and I love it but my MJJC 2.0 needs new filters in less than a year. I know it has a different filter set up. Pan if you’re reading this, maybe you can do a filter change video for others to know because there is a difference. Just saying thank you again love your videos always 👍

@kirillkozlovsky3944 Год назад

Hey Pan! Thanks for the great video, so appreciate it. In my opinion, its not enough to compare the foams. I think you missed the most important to compare. Which one cleans better??? Thicker foam doesnt mean it cleans better. Please next time take some dirty car and check it by washing after the foam.

@PanTheOrganizer Год назад

We did not talk about cleaning, as that's not the purpose of the video. What does the cleaning is the snow foam, not the foam cannon lol. The foam cannon simply lays down a layer of foam. It doesn't matter if it's thicker or runnier if you're using the same snow foam. What matters for cleaning potential is the actual chemistry of the snow foam itself. And I already have plenty of videos on that topic.

@Jonathan1003 Год назад

Hey Pan any chance you can tease us for when your best of 2023 Products video might be coming ? 🙏🏼

@PanTheOrganizer Год назад

At the same time like every year. End of August to early September. It will be a mega one this year!

@Jonathan1003 Год назад

@@PanTheOrganizer awesome man can’t wait super excited !

@PanTheOrganizer Год назад

😁👍🏻

@richardseem7948 Год назад

Another awesome product review and comparison video good friend

@PanTheOrganizer Год назад

Thank you! Cheers!

@stephanecormier9004 Год назад

Vidéo très intéressante encore une fois, merci pour le comparo et tes précieux conseils🙂

@PanTheOrganizer Год назад

Merci Stéphane!

@tobywall3118 Год назад

Now you need to v3 to compare them all

@baronianmcclure8865 Месяц назад

The MJJC version 2 has a filter-metal gaze-filter inside the nosle there was no metal gaze in the version 1

@vicalsi1568 Год назад

On V1.0 yo7 have to use the 1.1 mm orifice to get shaving cream thickness. V2.0 is MUCH thicker with a 1.1 than the pre-installed orifice. So far my V2 outshines all the others I have tried(Griots Boss foam cannon performed similarly)

@edsexton9836 Год назад

Pan, great review and comparison. I purchased the version 2.0, and I'm very pleased with it. Question, do you prefer a wet surface before foaming or dry? It seemed the foam stuck to the surface longer on the dry side. I can only assume that is better. Not a pro here, just an enthusiast.

@PanTheOrganizer Год назад

It doesn’t really make that big of a difference. See my video on that topic: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-16SwGBQ29rs.html The biggest difference for the pre-wash is what snow foam you pick. See my video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I7z8ajojRVI.html

@sheersy2987 Год назад

Most of the stock on the market now is V2 and V3 is on its way 😉

@26DX047 Год назад

I have the MJJC V1 and I don't rate it at all, I prefer my cheaper Italian PA cannon from Autobrite Direct (in UK), main difference is the MJCC uses twice as much product, I can only go around the car once with the MJJC but I can go around twice with the Italian PA. Pan would be interesting to know if the product usage on the MJJC V1 & V2 are different.

@peteraskerow Год назад

Hi Pan Great video as always,but just as a rank amateur I was just thinking isn't the whole purpose of using a foam cannon is to have the foam bind as much as possible with the dirt and run off ? If a contact wash is always necessary to get rid of the film of dirt anyway,what's the point of foam sitting on the surface? What's the point of foaming anyway? Initial rinse,contact wash seems more logical to me.

@PanTheOrganizer Год назад

There’s a lot more to it. Here are a couple videos I made which should show you how snow foams can be very important as part of an effective pre-wash: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I7z8ajojRVI.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8j5dJUM8Fb4.html

@peteraskerow Год назад

@@PanTheOrganizer Thanks Pan.Very informative.

@PanTheOrganizer Год назад

My pleasure!

@djbabygggudani7911 Год назад

Pan,just say thicker or foamier,don’t add “more” LOL!love u Pan,I’m buying the 2.0 thanks to your review

@PanTheOrganizer Год назад

Enjoy!

@justinlins4720 Год назад

Good stuff now just finding the balance... What do you think Pan... Need some run off incase of any heavy dirt or particles... Keep up the good work 🤙🏻🤙🏻🤙🏻

@PanTheOrganizer Год назад

Thanks Justin

@ariv4479 Год назад

Would be a better comparison if both cannons were out of the box brand new. V1 may have soap residue in the mesh.

@PanTheOrganizer Год назад

It has always performed identically. And I always clean/flush my foam cannons after each use so no soap residue. Also, all the other channels that have tested v1 vs v2 came to the exact same conclusion. Yes v2 produces thicker foam. Even a blind person would notice that.

@kodai_fa5 Год назад

I thought this, too. The V2 is newer so it should perform better than a used V1. Even if it is rinsed out every time. I bet water hardness factors in, too.

@joweynatividad2347 Год назад

Not sure if v1 has it since I don’t have one, but v2 has an inside thread under the cap that can also take standard size bottles like a 16oz bottle. Can you confirm if v1 has it also?

@crimsonking8746 Год назад

Quote from Amazon listing as of 6/11/23... "Currently unavailable We don't know when or if this item will be back in stock."

@krisnanugraha8493 Год назад

Wow , nice video pan, i have v2 , this my favorite foam cannon 😍

@PanTheOrganizer Год назад

Thanks Krisna!

@rbiamby Год назад

Hey Pan, I live in the Mid Atlantic and we have been experiencing the smoke from the wildfires in Canada. What can I use to wash the ash particles off of my vehicles.

@Tom_Lin Год назад

7:48 that's my biggest gripe with the MTM bottles. I hate that tiny opening.

@PanTheOrganizer Год назад

I agree, they need to make a big mouth version soon. The competition is heating up lol.

@xxHydroponicxx 3 месяца назад

Thanks Pan

@PanTheOrganizer 3 месяца назад

You're welcome!

@perrywysong8825 Год назад

Completely off topic but I am opening a shop in hopes of moving away from mobile service. Have you ever used a water containment system?

@PanTheOrganizer Год назад

I haven't.

@CaptainMike100 Год назад

Pan, was there any difference in the quantity left in each cannon after you did the passes on all 3 surfaces ? Did v2 consumed more product ?

@PanTheOrganizer Год назад

Not really

@milanbroceta7485 Год назад

I'm using a Karcher K7, so I'm wondering if it's better to use the MJJC 3.0 S with the pre-installed orifice 1.25 or to use the 1.1? It's clear from the video that 1.25 is ok for K7, but I'm not really sure because I wasn't fully satisfied when I used MTM HYDRO SNOW FOAM with 1.25 from a friend. Thanks PAN.

@PanTheOrganizer Год назад

You'll have to test for yourself and see. Start with the stock one, and if you like the foam output, stay with it.

@abhisheksreedhar7997 Год назад

Impressive improvement 🤞

@PanTheOrganizer Год назад

Thanks for watching!

@GF1Detailing Год назад

What happened with the caps on the rims? What's the story there? Not used to seeing that fantastic job though! Thank You!!! One last thing is that V2 sounds quieter than V1.

@PanTheOrganizer Год назад

These were just the winter wheels on my girlfriend’s SUV (this was filmed during winter). A popular choice in Canada to help protect summer wheels.

@Aestheticsauto Год назад

The nozzle change does the same

@PrinceOfDarkness1975 Год назад

Hey Pan, what are the differences between using a foam cannon with pressure washer & a pump foamed like a Marolex 3000? Ty.

@PanTheOrganizer Год назад

The pressure washer and foam cannon setup will always generate the most foam and performance, and speedier application, compared to a regular foaming pump sprayer (that you have to manually pump) or a regular foam gun attached to a garden hose. If you already have a pressure washer, get a foam cannon.

@UberYou2ber Год назад

Which foam do you prefer on a vinyl matte wrap? Is Chemical Guys Mr. Pink good enough for a maintenance wash?

@PanTheOrganizer Год назад

Any pH neutral snow foam with no wax in it, and no gloss enhancers, will do. Not sure on the Mr Pink though as their shampoos and snow foams usually have gloss agents. If you want to stay within the CG line, at least use their matte shampoo here: amzn.to/3CkL0Fu But I would recommend something like this: amzn.to/3Ch3O8K Or this: amzn.to/42wN47S See my matte care tutorial: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5RocSxJQmzI.html

@pantac4493 Год назад

You had me confused with “new”. V2 is almost 2 years old already. Thought a new version came out for a second

@PanTheOrganizer Год назад

Haha yeah I just got mine a few months ago.

@maeharakeichi5039 Год назад

Ver.2 already available in Japan? I'd not like to go get the old Ver.🤔

@tmanch1 Год назад

Great comparison, I have the v2. Pan, don't know if I missed it, but do you have the foam adjustment on both cannons at the extreme clockwise position? Thx.

@PanTheOrganizer Год назад

I have them at max foam output, always.

@epixgamingcommunity Год назад

Great video demonstration 👍🏻

@PanTheOrganizer Год назад

Thanks 👍 Welcome to my channel. You discovered one of the biggest car detailing channels on RU-vid as we surpassed 900,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@ocddetailer Год назад

I hate how much it leaks it stores so much water in the nozzle part like ridiculous amount

@coy9898 Год назад

Hey great video Pan! Can you recommend some quick connectors in Canada for pressure washers. Or does it matter? Thanks!

@PanTheOrganizer Год назад

The foam cannon comes shipped with the 1/4 inch quick connector.

@tifouinetifouine9741 Год назад

Salut the pan organizer, il n'y a plus de vidéos en français (ou francophone) depuis un moment, ça manque...😔✌️💪

@PanTheOrganizer Год назад

Bonjour Tifouine. J'ai déjà répondu à ce type de question à maintes reprises. Je produis encore des vidéos en français, mais moins qu'avant, faute de temps. Ça demande un temps fou produire une seule vidéo (10 à 15 heures parfois) et donc tout recommencer en double à chaque vidéo pour aussi filmer en français est inhumain. Je fais tout seul en plus. Je n'ai pas d'équipe avec moi. Je ne suis pas le seul RU-vidur de detailing qui parle plus d'une langue, et pourtant, je suis le seul à produire des vidéos bilingues. Ça démontre à quel point c'est exigeant. Ce n'est pas un jeu d'enfant. Aussi, 90% de mon auditoire est anglophone, donc fournir le même temps et la même énergie pour 10% des résultats n'est pas viable. Ceci étant dit, il y a quelques vidéos françaises en cours de production, qui paraître sous peu. Je fais mon possible. Merci de ta compréhension.

@cranfktubner7677 Год назад

Are v1 & v2 brand new? I wonder if there is some kind of maintenance to be done after some time using a foam cannon. Maybe that would explain some differences? Also the type of emulsifier?

@PanTheOrganizer Год назад

Zero maintenance if you care for them. After using the foam cannons, I always flush them by putting just warm water in the container, and running it through for 30 seconds, to flush any potential soap residue out of the head. Let air dry, and you're done.

@GypsyRok Год назад

What I'd like to know is did the version 2 use more solution than version 1?

@PanTheOrganizer Год назад

Nothing noticeable. They seem identical, but I didn’t do premcise measurements as I didn’t feel the need to, as I could coat a vehicle with the same amount of solution with both cannons and still have the usual amount left over.

@finitolowpez Год назад

Thank you Pan for your awesome videos. Quick, question, what car shampoo did you use in this video? 1 or 2 oz? Thanks in advance

@PanTheOrganizer Год назад

Thanks Finito, but I'm a little disappointed in you, as I gave the answers to your questions very clearly in the video... Here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-urkNdvXufJo.html You have to watch my videos from beginning to the end. ;) I also placed the links to the all the products including the shampoo, in the description under the video.

@finitolowpez Год назад

@Pan The Organizer I really apologize, I stepped out for a minute to check out on my kids. Thanks for the quick reply and your patience. You're the best 👌

@PanTheOrganizer Год назад

Hehe no worries. Family first! ;) I hope you enjoy my videos. 😁👍🏻

@Remyp388 Год назад

Awesome review pan!!

@PanTheOrganizer Год назад

Glad you enjoyed it!

@ismailbouabdillah6755 Год назад

So which one cleans better? Runny or thick?

@PanTheOrganizer Год назад

Cleaning power depends on the choice of snow foam, more than it does runny vs thick. Runny vs thick is a question of personal preference in my opinion. If you want cleaning power from a snow foam, get something like Bilt Hamber Auto-Foam or Touch-Less, or CarPro Lift. If you use just a pH neutral snow foam in your foam cannon, that's mainly for more lubrication, they have no real cleaning power for the pre-wash stage. I have a bunch of videos already on that topic.

@vannitagliavento 4 месяца назад

At which dial setting do you keep your mjjc cannons? all to the + or to the -? I'll go to calculate PIR for BH Auto foam (and I also use GSF) so I want to set it the best before calculating the output! Thanks!

@PanTheOrganizer 4 месяца назад

I always set all my foam cannons for max foam output. Dial to the max on the side that gives the most foam.

@vannitagliavento 4 месяца назад

@@PanTheOrganizer ok thanks Pan, so I guess it is fully clockwise (+) on the MJJC!

@OneSmellyTaco Год назад

I just got the v3.0....thought hed have a comparison

@PanTheOrganizer Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NQUWSU4yuFk.html

@ericlemelin3215 Год назад

I bought the mjjc one year ago, I don’t know why there is no foam getting out of it this year. I don’t know why

@PanTheOrganizer Год назад

Perhaps it's clogged with chemical residue. Do you rinse the foam cannon after each use? It's super important. After each use, I rinse the container, and fill it with hot water, and run that through the pressure washer for 30 seconds, to flush everything out of the foam cannon body and filters. Then I let it air dry, and store it until its next use.

@ericlemelin3215 Год назад

@@PanTheOrganizer I don’t. But I will. Thx for the cue.

@RobFromCanada Год назад

Hi Pan - I had a major issue with my Griot's foam cannon (only sprayed water, the soap mix didn't come up the straw), so I'd rather buy next one in person. What is the best foam cannon that I can buy by walking into a store (Toronto)? Thanks in advance.

@PanTheOrganizer Год назад

I don't buy my products and equipment in stores, as big box stores rarely have the enthusiast or pro grade stuff. I order online. Links in the description under each of my videos. Also, I don't know which store you shop in, and it might not mean we have the same stores in Quebec unfortunately. Ordering online not only gets you the best price, but the best selection as well and access to things not found in stores.