MOBILE Flip Top Mitre Saw Station - Table Saw Outfeed Table Miter Saw Station - Mitre Saw Stand

Подписаться 15 тыс.

Просмотров 42 тыс.

50% 1

This video will show you how to build a mobile flip top mitre saw station that also doubles as a table saw outfeed table.
Plans for this Mobile Flip Top Miter Saw Stand: BedDeskPlans.Com/shop
This Mobile flip top miter saw station table saw outfeed table will increase your woodworking productivity. It can be really annoying when you need to use your miter saw and it's buried under your workbench. Maybe you have a woodworking project that requires you to use a table saw outfeed table, but your mitre saw is in the way. This flip top mobile mitre saw stand solves that by being able to transform from a mitre saw station to a table saw outfeed table in seconds.
If you have a small shop and space is limited, this flip top table saw outfeed table for a small shop is perfect! you can have a mitre station and an table saw outfeed table in one flip top workbench build.
If you're a woodworking beginner and need a flip top workbench, this is a fun and easy woodworking project idea to try out. A miter saw station is a must in any woodworking workshop, and now you don't have to compromise between a table saw outfeed table and a miter saw stand!

Хобби

Опубликовано:

13 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@alheeley 2 года назад

Ive watched a shedload of these flip-top mitre station builds and I must say I think yours is the one of the best I'm going to go for - very nice solutions - simple and smart - thanks for sharing!

@TheHowtoDad 2 года назад

thank you for that comment! I'm glad to hear that it meets your standard. And thank you for the order! There are metric dimensions on the drawings, let me know if you have any questions!

@toco789 3 года назад

This is the flip design that wins it for me, no bolts to lock, no hinges to buy. Nice work, I shall shamelessly copy the concept for my shop and claim it as my own design to my wife

@TheHowtoDad 3 года назад

not having to mess with pins was important to me. if I had to spend time taking them out, tightening them down etc, I would be less likely to use it. reduce friction in the work flow. glad you like it, hope you're wife approves

@russellleboeuf8637 2 года назад

I already have my work bench on casters, I always had my miter saw under and now I'm thinking of adding a flip top to make things easy. guess I'll be cutting my bench apart soon. :)

@TheHowtoDad 2 года назад

I love this bench! I use it all the time

@LateralThinkerer 2 года назад

Some brilliant design tricks in this - well done! Avoiding having "stuff" permanently parked on it would be a challenge for me...

@TheHowtoDad 2 года назад

I have the same stuff problem...The dual use of the table actually really helps to keep stuff from piling up. My BinMaster work table really helps me keep stuff off it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GV330cTvtX4.html

@tomtran2983 2 года назад

By far the best and easiest flip top workbench design. Well done!!

@TheHowtoDad 2 года назад

thanks bud!

@aaxmym Год назад

Dude, this build kicks so much ass. I gotta give it a thumbs up👍

@TheHowtoDad Год назад

your comment kicks so much ass! thanks!

@jigurd 2 года назад

Took me a minute to realize who your assistant was, love the style!

@TheHowtoDad 2 года назад

he's a bit of a pain in the butt sometimes...

@jigurd 2 года назад

@@TheHowtoDad Worth it to have someone that can haul wood that fast I bet!

@TheHowtoDad 2 года назад

@@jigurd works for beer, but too many beers and he doesn't work!

@poppajcheese 2 года назад

This needs more views!!! I think this is the best design in this category I've seen on YT - thanks for such a great build!

@TheHowtoDad 2 года назад

I wouldnt disagree...thanks!

@booboobangbang6685 3 года назад

Wow, I love this!

@TheHowtoDad 3 года назад

Nice! Glad you're into this!

@dirkrichardson1681 3 года назад

Wow nice. Caster system is great. So easy and cheap compared to other systems!

@TheHowtoDad 3 года назад

Man they are sweet!

@VafaGhoreyshi 3 года назад

I like your lift mechanism. Unfortunately I can't use it on my 4'x8' table due to the size but I love your solution.

@hayhay182 3 года назад

This is such a cheap and simple design yet so practical! I've been looking for a good mitre saw set up and I think this is it. Keep up the awesome vids!

@TheHowtoDad 3 года назад

Thanks, glad you found what you were looking for!

@MrJackFalafel 3 года назад

Great video! And a great work bench!

@TheHowtoDad 3 года назад

Thank you, and thank you

@V1N_574 2 года назад

smooth editing, love it!

@TheHowtoDad 2 года назад

happy the effort is appreciated

@hondaguy9153 3 года назад

That's an awesome table! I wish I had space for it in my garage, this would be perfect if my garage was 1-2 feet wider.

@TheHowtoDad 3 года назад

can't manufacture space...but at least dual purpose work stations help. Have you seen the videos on the bin master and fold down work bench? Those might work well for your situation ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GV330cTvtX4.html

@MultiFrets 3 года назад

Awesome build, I love the casters, I'm definitely going to make this soon! I've been looking for dual use tool stands to save space as I'm working in a 2 car garage. Absolutely nailed the build, and I saw the great editing at the beginning. I stopped the vid at 2 minutes to tell you how much i liked it, but stopped myself and finished watching first. Keep it up!

@TheHowtoDad 3 года назад

Great! thank you! I'm glad you enjoyed the video and the build. This video took me way too long to edit...sometimes I wonder if it's worth it. Comments like this, make it worth it! thanks

@kadenen 3 года назад

This is great and better than the design I had come up with! I was trying to think of a way to hide the miter saw but hadnt thought of flipping it upside down like that. I also might be getting a table saw without the stand, so my idea was to have the table saw built onto the end level with the top

@TheHowtoDad 3 года назад

You could do that too. My jobsite saw rolls around so I don't need it built in.

@kadenen 3 года назад

@@TheHowtoDad and I'm just a weekend warrior, I didnt want to spend extra money on a nice stand like that lol

@TheHowtoDad 3 года назад

@@kadenen fair enough. Buy what works for you, but buy quality. It's a good idea to think about buying your last tool first (buy a tool that will last forever)

@sandordugalin8951 3 года назад

That's tight.

@TheHowtoDad 3 года назад

Toit!

@ScottHebert604 3 года назад

I have been looking at mitre station/table saw vids to get ideas and that little caster switch is a really good idea, might have to take it haha!

@TheHowtoDad 3 года назад

it's one of the best parts of the build for sure!

@pauleohl 2 года назад

4:24 I also use the table saw to mill out rabbets.

@TheHowtoDad 2 года назад

I'm too lazy to switch out my blades, or to get my router table out...

@themaxismax 10 месяцев назад

is there more detail for the wiring setup? I am having trouble conceptualizing where the outlet is wired to in the table, and it doesnt seem to be in your plans.

@TheHowtoDad 10 месяцев назад

I didn't include that in the plans because it is wiring, which could be dangerous. send me a message through the website and I will send you some more detailed photos

@mattpisani6933 3 месяца назад

Hi, I like the build, and I'm assuming you don't have a twin, but it's just two of you in the video. I'm building a one-car garage shop and had a question. Since you've build this miter station workbench, have you ever regretted not incorporating your table saw into the build? Thanks, Matt

@TheHowtoDad 3 месяца назад

not at all. my table saw is a job site saw, and I like the versatility of it. I like the ability to work with my saw in other places

@msfrat123 3 года назад

Awesome video! I love the Ingenuity behind it all. Random question: what is that pen/pencil you are using in the video?

@TheHowtoDad 3 года назад

Not random at all! That pencil is awesome, it's called a pica pencil. I'm doing a give away for one in my previous video now. Winner will be announced next weekend

@TheHowtoDad 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sm2JkbCaAH8.html this video

@cougarten 2 года назад

If the foot pedal could swivel left and right you could lock it by just pushing it under a permanent ledge

@TheHowtoDad 2 года назад

hadn't thought of that! cool ideat

@ClickLikeAndSubscribe 3 года назад

That's sure elaborate!

@TheHowtoDad 3 года назад

But simple, also

@ClickLikeAndSubscribe 3 года назад

@@TheHowtoDad I can only imagine what your kids are going to do with such dad attitude :)

@michaelcichonsky8714 2 года назад

Used your plans as a base for mine! Do you have a link to which casters you used? Mine seem to be too large so they don’t flip down that easy easily.

@TheHowtoDad 2 года назад

I used 2" swivel casters. I got them at home hard to find there. send me pictures of your build!

@billwong553 Год назад

I going to do this. It’s great. My one question is if you could have built a second stop lower on the back an not need a bar in the front. Maybe it wouldn’t be strong enough. I’m newer at this so I’m just curious.

@TheHowtoDad Год назад

which bar in the front? I'm not really following what you're saying

@billwong553 Год назад

Sorry. I meant the two pieces that fold in to hold the front up on the miter saw.

@billwong553 Год назад

@@TheHowtoDad I love the wheel setup. Best I’ve seen. I’ve looked at a few designs online.

@TheHowtoDad Год назад

@@billwong553 you could try messing around with that. put the lock in the front so it was easy to access for a quick change over.

@chrisaiello5230 3 года назад

Do the plans show how to measure/ adjust height to match table saw and how to ensure that when the miter saw is flipped up the rest of the bench is the same level as the saw base?

@TheHowtoDad 3 года назад

That's a good point. It would not be difficult to figure this out. I can ad that to the plans. Basically the legs would need to be adjusted. And the location of the pivot one thickness of the flip section. The good news is, it is fairly standard that mitre saws are 3.5 inches from the work surface. I will add this idea to the plans tomorrow

@TheHowtoDad 3 года назад

I am working on finding heights of other miter saws. Can you help me out? Can you measure your miter saw and let me know the base height?

@chrisaiello5230 3 года назад

@@TheHowtoDad Awesome! I have a cheap Kobalt from Lowes. Base height measures 2.75". This table looks awesome. I'm moving in a week and would love to build this in the extra garage bay. Definitely would help me maximize my space in a more usable way.

@TheHowtoDad 3 года назад

@@chrisaiello5230 that's easy to solve! Just put 3/4" shims under the saw to bring it up to 3.5 inches. This is really common practice for a lot of guys. But I'll still try to work it out

@chrisaiello5230 3 года назад

@@TheHowtoDad nice and easy!

@mcharlenesanford1521 2 года назад

I have tried purchasing the plans for this but for some reason cannot. Is there a better link to obtain them?

@TheHowtoDad 2 года назад

that's really interesting...also discouraging to hear. send me a message through the website so we can discuss this further. I'd really like to know why this is happening so I can try to avoid it in the future! thanks in advance

@mcharlenesanford1521 2 года назад

@@TheHowtoDad Hey i finally got it to add to the cart so that I could purchase. Weird. Maybe some block at work that prevented me from accessing. Love the design…may make a few mods to the flip tray. Leaning toward a locking system on the front maybe…havent decided yet.

@TheHowtoDad 2 года назад

@@mcharlenesanford1521 thanks, I sent you an email. I've noticed sales are little slow as of late, I'll contact WIX to see if there is something wrong with their system. thanks for sticking with it!

@reubenrosofsky4791 3 года назад

What is the size of the table. Thanks

@TheHowtoDad 3 года назад

36x72" and that is adjustable if necessary

@lmcc8798 3 года назад

Double mechanical genius. No triple.

@TheHowtoDad 3 года назад

can't stick those tripples...

@TheHowtoDad 3 года назад

Plans: www.beddeskplans.com/shop

@RollieWright 3 года назад

Was checking out your site but there are no dimensions unless I buy it. Can you share? I want to build something similar but only have about a 43” space.

@TheHowtoDad 3 года назад

@@RollieWright sorry about that, it's not intentional to keep the dimensions secret. it is about 72" wide and 36" deep. those dimensions are flexible. it's just the size I wanted. feel free to contact me through the website too.

@grassyknoll182 Год назад

If you buy these plans beware the front sides are incorrect measures - noted as 20.25” but should have been 21.25”

@TheHowtoDad Год назад

this is the first time I've heard this. I built mine from the plans, and had no trouble. can you send me a message on the website so we can find out what went wrong?

@TheHowtoDad Год назад

you're 100% correct. I have updated and uploaded the new plans. thank you for pointing that out!