Тёмный
No video :(

Model Railroading 101 Adding NMRA Recommended Weight To Railcars For Beginners 

TSG Multimedia
Подписаться 66 тыс.
Просмотров 44 тыс.
50% 1

#trains #ForBeginners #railroad #NMRA
Please support TSG Multimedia on Patreon!
www.patreon.com/tsgmultimedia
Production Note: John's EZ Weight Calculator App on the Apple store has been discontinued due to lack of interest. I'd like to thank everyone who tried it!
Have you ever heard about adhering to NMRA recommended car weights in your rail cars so they perform better? If you haven't, it might sound a little weird. If you have, you probably know about this NMRA recommended practice, and why people do it.
The NMRA's recommendation for rolling stock weight is intended to improve performance and reliability, as well as adding a more prototypical look to your models.
In this episode of MR101, we take a look at the reasons why it makes sense and also discuss methods of doing the work to make it happen.
If you enjoy this content, please hit the "like" button and share it with your friends on social media!
Join TSG Multimedia on these other social media channels:
FaceBook: / tsgmultimediaface
Twitter: / tsgmultimedia
©2018 TSG Multimedia. All Rights Reserved.

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 217   
@metroredline
@metroredline 2 года назад
I'm also a musician, who plays bass guitar. I cut up old bass strings to appropriate lengths and glue them to cars/containers with adhesive caulk for weights.
@cookie4524
@cookie4524 6 лет назад
One of the best, and least intrusive things ive found has been Tungsten putty. tungsten is heavier than lead, and as a putty its super easy to use and could easily be hidden below most train cars.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Cool - more tips!
@rocknewtonfilsterwilly7364
@rocknewtonfilsterwilly7364 4 года назад
For small spaces I use shotgun pellets, the small ones used for general skeet shooting. They will easily go thru a 1/8" hole or even smaller. They are heavy and fill voids efficiently. I use them to balance tail heavy Aircraft Models as well.
@geraldstewart
@geraldstewart 8 месяцев назад
I picked up a Free paint stirring stick at the Home Depot paint department. I wrote the weight required next to each inch on the ruler with an extra-fine-tip Sharpie pen.
@ianhiggins8728
@ianhiggins8728 6 лет назад
I use split sinkers that are small, I cut them in half with a small pair of side cutters. Super Glue is used to hold the weights in place .
@davespratt9533
@davespratt9533 4 года назад
Great Information John, I'm in the UK working in both N and OO/HO scales (different layouts) so will be transposing the length and weight details to metric. I was disappointed when my N gauge closed van wagons repeatedly derailed (straight from manufacture), I added lead shot fishing weights inside the wagons, which has solved the problem, without any reference material, thanks for pointing out the NMRA guidance material this will help to keep a good standard across my rolling stock in all scales.
@genejablonski9909
@genejablonski9909 3 года назад
My favorites are nuts and washers which I have plenty of in my tool box and attach with silicone if practical for the car being weighted. Tank cars are difficult so maybe drilling a hole on the bottom and filling with sand works for me.
@tonyvancampen-noaafederal2640
One of my favorites is bird shot #12 mixed with either epoxy or PVA glue.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Someone on FaceBook suggested using clay so that you can add more precise weight. What an excellent idea!
@metalmike669
@metalmike669 6 лет назад
Yes, I've used oil based Crayola modeling clay on my N scale rolling stock. It's heavy and easy to cut down and mold into tight spaces. I also use ball bearings.
@tsgmultimedia
@tsgmultimedia 6 лет назад
That's a great idea!
@ramonestubblefield758
@ramonestubblefield758 2 года назад
I most definitely will try the crayola clay thanks a million
@danielhulitt1212
@danielhulitt1212 4 года назад
Like the cycle weight idea, but just for safety, I would stay away from lead-based weights. I have used the double-sided tape often and did some steel shot in the battery boxes of heavyweight passenger cars. I used Tacky Glue to secure. They seem to track ok, but will be moving over the trucks later.
@Valderious_Toriador
@Valderious_Toriador 4 года назад
I've been watching this series from the beginning and I've learned a container full (bad train joke i know lol) about model trains, like the wheel set up for steam trains (0-6-0 for example), all the different types of M.O.W cars there are, all the different types of tracks (I didn't even know about scratch built tracks to be honest), the different tools involved, using the standard to make sure all the gauge matches, or that model trains could weigh different amounts. Looking fowards to watching the rest of this series and learning more about model railroading. So happy i came across this channel.
@tsgmultimedia
@tsgmultimedia 4 года назад
Thanks for the compliments. You may also enjoy the Model Railroading with Jack Burgess series on this channel. ru-vid.com/group/PLnxQpj82XbtoX5nN6DJCRA4rN3p_zhe0x
@BlackWolfessUSCM
@BlackWolfessUSCM 6 лет назад
Something a lot of people forget is, the standards in rail code, car weight, etc is a guideline to make sure "my railroad my rules" works. After all what good is a layout if the cars keep jumping the tracks. Everything has a base guideline that can be built upon in any way to suit someone's needs. Also I want that app now #NotATechnophile oh waitaminute lol
@N2RI1
@N2RI1 5 лет назад
the "inch worm" effect is corrected with the retarder springs included in Micro-Train Cabeese installed in one axle end next to truck so remote uncouplers work well ever since the early 70s.
@axeandrail
@axeandrail 6 лет назад
One step further, in the past I've made a 1"x2" strip of wood, mounted a piece of 2' track to it along with a Kadee coupler gauge at one end. Starting at the coupler gauge measure down the track with the predetermined weight recommendations for length of car marked onto the wood. You can check both weight and coupler height at the same time. You can also have a tether with alligator clips from you power source to have a portable programming track. This works really well for quick and easy trouble shooting and guys at clubs setting rolling stock on the layout after transporting to make sure all is right. You only need 3 things, wood, track, and coupler gauge to build this. Just an idea/tip I thought I would pass along.
@bigdaddy5179
@bigdaddy5179 6 лет назад
I use silicon caulk for gluing weights. Same as for laying track. I've had both epoxy and CA peel off after a couple years. I also paint the factory weight, because sooner or later it rusts. If the factory weight is heavy enough, I still drill a couple small holes in it so whatever I am using for glue can penetrate upward through the hole.
@tsgmultimedia
@tsgmultimedia 6 лет назад
This is great info. I wonder if anyone who watches has used hot glue and can let us know if that works OK. It seems like it should work if applied liberally.
@johnherrin5815
@johnherrin5815 4 года назад
New guy....I really appreciated the information. It's just weights, but I learned a lot.
@Iconoclasher
@Iconoclasher Год назад
Another way to add weight to a car that's difficult (like flat cars) is to take some solder and wrap it around each axle. Paint the wrapped solder with flat black and it's barely visible.
@BritanniaPacific
@BritanniaPacific 6 лет назад
I have a pair of coaches that I’ve owned for fifteen years, and I’ve always heard something rattling around inside them. The coaches in question are an Amtrak horizon coach, and a budd frisco railway coach. After taking off their shells some years later, I saw they had a thin piece of metal to weigh them down. But I think my frisco coach also owes its weight to the fact its wheels and bogie frames are metal, unlike my Amtrak coach that has metal wheels and plastic bogie frames.
@jamesrhayden7818
@jamesrhayden7818 5 лет назад
Very good advice for adding weight to cars. I'm past being a complete be beginner but I always go back to the basics. And your series here on UT is an excellent source. Thanks.
@erleclaire
@erleclaire 3 года назад
For weights, go to your local garage that sells tires, usually they will have a bucket of lead wheel weights. (typically they are free) Lead is soft and easy to shape, hammer out flat, and even fasion is loads. As for weight in N scale 1-1.5 oz is the target. And if one is too heavy the lead can be snipped down easily to reduce the load.....
@Obi1kenobi10
@Obi1kenobi10 3 года назад
I've got "oil cars" I added weight to as a kid. used motor oil and sand. ( The ran 30 cars to a refinery on my layout) ( I miss the heck out of that layout. ) (oh, I still have the cars 30 years later. still full of beach sand and Mobil 10W30)
@robertwillis7092
@robertwillis7092 Год назад
Love your informative videos on model railroading.!!
@tsgmultimedia
@tsgmultimedia Год назад
Glad you like them!
@garygrauman9440
@garygrauman9440 3 года назад
great video helps me out greatly on the weights on N scale.
@tsgmultimedia
@tsgmultimedia 3 года назад
Glad it helped
@petermenningen338
@petermenningen338 3 года назад
Solid copper wire either insolated or bare. can have different lengths and can be painted to simulate pipe or steel bar loads if exposed. Easily adjusted for length. An electrician friend might be a good source. For exposed wood pieces a cabinet or woodworker hobbyist could be a good source for this as there can be a lot of small dimension cutoffs from dado and relief cuts. Don't forget to offer some cold beverage as a thank you.
@doggonedog
@doggonedog 6 лет назад
I use the third example for weight. However, I also follow a Model Railroader article as a base that also helps in other ways. You take a piece of 1x4 cut to a length(mine is 5 feet), place a rerailer that's also a grade crossing and place it in the middle, put your track down on both side. Now add a coupler height gauge on both ends. From the left gauge mark out your inches but instead of the inch written, write the ounces. Now you can look at weight, coupler, and clearance of your trip pin. Adding electrical also allows for testing/programing of equipment.
@chucklamb3496
@chucklamb3496 4 года назад
Hi John, I’m new to the hobby and will follow your advice. Thanks!
@luisserbia8474
@luisserbia8474 3 года назад
Thanks for the info...basic buy definitely important.
@tsgmultimedia
@tsgmultimedia 3 года назад
Glad it was helpful!
@bkdexter79
@bkdexter79 4 года назад
The Kato Autorack cars are very tall and very light. I had to add 3, 1/4"-20 nuts superglued to the bottom of the car to get the correct weight. It was still very light and tended to tip in some curves. I love that it's heavier and more stable now. Thank you for the information!
@tsgmultimedia
@tsgmultimedia 4 года назад
Thanks for sharing - you can also add even more if it makes them run the way you want!
@MrMacAttacker
@MrMacAttacker 4 года назад
I really wish I had this resource when I first started! One thing i do now when I need three pieces of weight like in the vid, i will glue them to an ice cream stick that runs the length of the car to support the spread of weight, so the middle weight won't bow a plastic base over time
@arnoldpaine4973
@arnoldpaine4973 3 года назад
Well over 25 years ago I built a N guage layout on a hollow door. I got to the point where I needed to do ground cover, trees, etc... and I stopped because I ran into some problems with the track seperators for the different electric zones. I never considered checking the weigt for my cars. I don't think it was even a discussion point back then.
@user-nx8tk1pp5o
@user-nx8tk1pp5o 6 лет назад
For my N scale flat cars, hoppers, and gondolas I glue lead shot to the bottoms of the frames with CA glue and paint the shot black. Yes, you can see the lead shot if you are looking at the cars from eye level, but most people I know have a downward view of the cars and the lead shot is usually in the shadow of the car. For my wood chip hoppers which dont have that much room below the frame I have created a false bottom for the floor using left over flat sheet weights from other cars. For my tank cars and covered hoppers I will open them up and put lead shot in them. For box cars I use nuts, just like in this video, however I use CA glue to hold them down.
@willparsons32
@willparsons32 4 года назад
Your discussion was incredible! Absolutely a great time saver! looking for this info online can sometimes be tedious! Keep up the awesome work!
@tsgmultimedia
@tsgmultimedia 4 года назад
Glad it was helpful!
@northwind9505
@northwind9505 5 лет назад
Had no idea about this rule. But makes sence. I do remember as a kid added pennies to help the car ride better on the track.
@frederickcarlsen430
@frederickcarlsen430 5 лет назад
I try to keep it simple and use whatever is to hand. Spare nuts and bolts are always around for enclosed wagons, and for open types, I use lead fishing sinker filings. I create the filings by using a wood rasp to file away the lead, collect the filings and pour them wherever I can into unseen spaces on the undersides. All held in place by lashings of cheap CA glue.
@MrJohnB-qs6dp
@MrJohnB-qs6dp 2 года назад
Very useful & user friendly. Very good for a beginner like myself to know!! Stay Safe & God Bless!!!!
@geraldratte9254
@geraldratte9254 6 лет назад
Thank you for the wonderful tip on the template so easy to use and accurate this will save a lot of time and have more fun on our layouts. As for materials can find them anywhere for very cheap.
@tsgmultimedia
@tsgmultimedia 6 лет назад
That template trick is really great, isn't it?
@geraldratte9254
@geraldratte9254 6 лет назад
yes, it is and sure will use it as I buy more freight cars.
@dave3156
@dave3156 6 лет назад
Really glad you are continuing this series John. I agree with David Gerard--would like to see something on frame building. Keep em coming!!
@tsgmultimedia
@tsgmultimedia 6 лет назад
There are a lot of things to cover in this series! I am sure I will get around to benchwork at some point, either for MR101 or Model Railroading with Jack Burgess. Stay tuned - more good stuff is on the way!
@ianhiggins8728
@ianhiggins8728 6 лет назад
Hi John, I have done this to all my rolling stock and they operate so much better.
@tsgmultimedia
@tsgmultimedia 6 лет назад
I did mine, too and it all works much better. While I was at it, I also checked and corrected the wheel gauge. I still need to fix some of the coupler height problems I have, but most of my cars have truck-mounted couplers. That presents a challenge because I should really convert them to body-mounted instead but a lot of my cars are not worth doing that to.
@jimpalmer5435
@jimpalmer5435 Год назад
Great job, very informative .
@tsgmultimedia
@tsgmultimedia Год назад
Glad you enjoyed it!
@captain_ravioli1514
@captain_ravioli1514 2 года назад
Glad I found this, my gondolas and hoppers derail easily. Head up though, the GI Joe flatbed tilts so this becomes impossible and it's light so it will derail
@JoeG-firehousewhiskey
@JoeG-firehousewhiskey 6 лет назад
Thats a great idea to add sand in a tank car! Wow, i like that idea of having a paper with the weights on them per length. Awesome video! Thanks for the help
@tsgmultimedia
@tsgmultimedia 6 лет назад
You're welcome, Joe. I love finding out tips like that and sharing them. I think it makes the hobby far more enjoyable being open minded enough to learn from other people instead of re-inventing the wheel every time you have to do something.
@twiztedmowers2
@twiztedmowers2 5 лет назад
I've used bb's when I made a loco chassis for a dummy unit. I made the gas tank hollow and the middle section of the frame above the gas tank.
@majorwoody1720
@majorwoody1720 3 года назад
Good idea, I’ve got a container full of them
@billhudson7537
@billhudson7537 3 года назад
I tend toward heavier rolling stock, consider the NMRA recommended weight to be minimum rather than average. My technique for HO is to glue "BB" shot into the underframe. The lowest practical location, giving the best tracking. There is available finer shot for birds and c, but you must go to a shooting store for shotgun loads. And it's lead, some people are "allergic" to even the smell. I'm an old geezer and don't worry about such things, but the subject must cover every one's attitude.
@bobgilray9405
@bobgilray9405 6 лет назад
Thank you for the video. It sure will help with these ideas on adding the weight. Our club has a lot of cars that needed weight.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Excellent! That was the whole point to the program - share the knowledge and "best practices" so everyone can benefit! Share the video with your friends and club members if you think it's worthwhile, and thanks so much for taking the time to comment.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Lots of really great suggestions about what to use to add weight. I would like to make the EZ Weight calculator available for Android, but it will depend on the success of the Apple version. In case anyone cares, this channel and what I do to promote modeling, trains, history, and everything else is not a profitable endeavor. I am actively seeking sponsorships for the channel, but until I secure many sponsors, I can't waste time or money on stuff that does not help pay the bills. I love doing this, but I have to be selective! By the way, did you notice the sponsor for this program? Brightech makes some great magnifying lamps. If you need one, please consider buying it from Brightech and let them know you saw it here!
@alderusdmc
@alderusdmc 2 года назад
Wonder if we can see this app of yours made available for the PC as well.
@tsgmultimedia
@tsgmultimedia 2 года назад
@@alderusdmc It was discontinued the following year, as the trick with the paper diagram is WAY faster, easier, and free!
@Dymond_Y2K
@Dymond_Y2K 6 лет назад
You were reading my mind about tank cars! Nice and easy solution!
@davidcurtis5398
@davidcurtis5398 6 лет назад
At our train club (over 300 cars) we used sand in some of the open cars and then painted the sand the color of the car. This with some glue worked great and was almost hidden when on the layout and viewed from the floor standing beside the layout. No visitor ever commented about the sand.
@rvnmedic1968
@rvnmedic1968 3 года назад
Thanks, good stuff!
@markwilliams2620
@markwilliams2620 6 лет назад
BB's....the shooting kind....also are easy to pour into a hole on a tank car for HO. Add some white glue wash after adding them and set the car to dry overnight. I always have BB's because I add a couple to every bottle of paint I open.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Good one! Some other people suggested shot for shotgun shells.
@odalesaylor
@odalesaylor 6 лет назад
More of the Model Railroading 101
@tsgmultimedia
@tsgmultimedia 6 лет назад
Yes!
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 4 года назад
Very informative John, even for us Old Farts!!! 😜 Absolutely LOVE that Weight Chart! Making one right after commenting. I've always run mine *heavier than NMRA Standards.* My Layout doesn't exceed 2% at the steepest point, and besides... Like you said, an excuse to add more Power is always a good idea!! 😊 The only thing you might have added for the beginner - besides weight, Plastic Wheelsets will also cause the Inchworm Effect. This is a great, solid Series! Doesn't matter that I've been in the Hobby since 1974... We ALL need ideas and refresher courses! 👍👍 Carmine ✈🚂🚙
@LordRusty5
@LordRusty5 6 лет назад
Good video, John! I don't own a cell phone ... ain't about to ... so I'll need to go 'old school' on getting the weight figured out for my passenger cars - old Rivarossi coaches and whatnot. I like the length/weight gauge on paper you had! Another good adhesive is Barge Cement - aka Rubber contact cement ... even Walthers Goo.
@08biker97
@08biker97 5 лет назад
Great video, I'm a beginner and very well done, very understandable, thank you , thank you
@bobbiemitch
@bobbiemitch 6 лет назад
If space is really tight, one can cast specialty weights from Cerrobend or Bismuth bars; assuming lead is not an option. I can still get lead sheets from my local HVAC supply house and on line.
@dwightatnorthernstar1820
@dwightatnorthernstar1820 6 лет назад
Good job, John, thanks
@SteveH-TN
@SteveH-TN Год назад
Again thanks for sharing this video and information. I purchased a scale to be able weigh my rolling stock Recently I purchased a 3d printer and learning various CAD to design unique weights. Thankfully I’m retired and have an understanding wife that supports my various hobbies. I have a friend that has performed “ HO car maintenance “ for several club layouts. I now wish I had spent more time as his understudy. I searched the Apple store for “John’ s easy weight calculator” but didn’t find it ! HELP ! ?
@J3scribe
@J3scribe 6 лет назад
Nice job John. Keep up the good work!
@tsgmultimedia
@tsgmultimedia 6 лет назад
Thanks! I like to share stuff like this. I learn quite a bit when I research the topics; both by reading and by talking to other modelers.
@iwasateenageninjaferret4486
@iwasateenageninjaferret4486 6 лет назад
John- It's greatly appreciated! 👍
@elleryparsons5766
@elleryparsons5766 4 года назад
Very Interesting.
@ThePaulv12
@ThePaulv12 6 лет назад
I must be becoming an old BASTARD, but that Brightech lamp really excites me. I must have one - I simply must. I have to admit this is the 1st ever ad on RU-vid I've ever paid any attention to. I hate ads but they finally got through to me lol.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Give in to your old bastardness, come to the dark side! Make sure you tell them you saw it here too!
@nssherwoodsub
@nssherwoodsub 6 лет назад
Great segment on an important topic. One thing to understand is that many weights are steel or contain iron which may cause problems with uncoupling magnets. Back in the day, lead was used but it's toxic so we cannot do that any more...Harold
@NightOwlModeler
@NightOwlModeler 6 лет назад
Generally, I still use lead. If handled properly, there's no risk. Don't be stupid and eat a cheeseburger or rub your eyes while having lead powder/filings on your hands and you'll be fine. Wash up afterwords with shop soaps that scrub your fingers and hands well. The serious danger was in lead paint, which tastes sweet. Children would find paint chips around the house or yard and eat it. - Thus the push against lead paints. Metallic lead is much safer. I'm able to buy it by the sheet in various thicknesses at building material stores for roof flashing. No issues. NOM
@Dymond_Y2K
@Dymond_Y2K 6 лет назад
So pennies would be a good alternative for being cheap and non magnetic..
@cookie4524
@cookie4524 6 лет назад
tungsten weights are a good alternative
@SGTGhost
@SGTGhost 6 лет назад
Great tip video John, I founded it always useful
@tsgmultimedia
@tsgmultimedia 6 лет назад
Cool - this was the intention. I hope you were entertained along the way as well!
@switchtrackrailphotos5702
@switchtrackrailphotos5702 4 года назад
recently i made a track cleaner and to make it heavy i just used an old spike
@tsgmultimedia
@tsgmultimedia 6 лет назад
I think unloaded well cars should just be pulled as a unit train. I don't see any practical way to make those heavier. Someone suggested only using well car models that are metal. I like that idea too. That's as heavy as you can make them without adding containers, right?
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 4 года назад
Knowing your experience level, I feel safe suggesting this.... What I call the "Hanna Method" because it's definitely not mine! 😉 On Well Cars, Flats, ect.... Replace all distribution Lines under the Car with solid Lead Solder. Can look quite good, stands up to scrutiny - and adds sufficient weight down low!! 😁 Carmine ✈🚂🚙
@ryans413
@ryans413 Год назад
Adding weight can help with the turnouts. The cars will be less likely to jump the track at a turnout causing derailment. Especially when the trains pushing the cars instead of pulling .
@randysrockandrollrailroad8207
@randysrockandrollrailroad8207 6 лет назад
Hey John, thanks for sharing, I need to do this to my cars
@tsgmultimedia
@tsgmultimedia 6 лет назад
I have some Bachmann cars from a train set I bought years ago and they were all about half an ounce below the recommended weight.
@intermodalman123
@intermodalman123 6 лет назад
Leaded solder is a favorite of mine, very flexible shapewise. Please make your calculator available on android too, really could use it's help
@elsdp-4560
@elsdp-4560 6 лет назад
THANK YOU...for sharing.
@dthead
@dthead 6 лет назад
Good lesson. One thing NMRA does not cover is the 4 or 6 wheeler, the formular tend not to work as well. Some say you add weigh until a train can approach the wagon and couple witout just pushing it. This causes a lot of discussion outsode of America since the UK, Europe and Australia have or stil have 4 wheel wagons. This is not somehing you can fix, but for many peopols starting it is good to know ( ie thr 4 wheel bobber caboose may need extra weight) I suppose this falls into "myRR my rules" area, and efinately into the experimental area.
@tsgmultimedia
@tsgmultimedia 6 лет назад
It's possible they did not tackle that in the US because our prototypes generally do not include 2-axle rolling stock. We have mostly 4 axle and in some cases 6.
@billyray94
@billyray94 6 лет назад
Good episode John.
@garysanford2606
@garysanford2606 3 года назад
Just getting into N Scale what great ideas for weighting cars.
@rjl110919581
@rjl110919581 6 лет назад
THANK YOU DETAIL VIDEO AS GOOOD TO KNOW THINGS
@MrAlex-ej8ov
@MrAlex-ej8ov 6 лет назад
Something strange, I got a southern gondola, exactly like the one in this video, and there are weights in it. It came with 7 other cars and an SD40-2 on eBay.
@ProScaleModels
@ProScaleModels 4 года назад
Great info and vid, couldn't find your app though...
@tsgmultimedia
@tsgmultimedia 4 года назад
The app was discontinued. Use the measurement on a sheet of paper trick - it's way faster!
@ProScaleModels
@ProScaleModels 4 года назад
@@tsgmultimedia I did - lol - just wanted to support cha! Thanks.
@arkie74
@arkie74 6 лет назад
I put as much weight as I can in all my cars. that way there is no danger of straitlining. also like he said the cars operate alot more realistic slowing down and speeding up. but derailments happen, funny enough, when they do wreck it looks real lol.
@douglasmccarty1196
@douglasmccarty1196 5 лет назад
I add real loads for weight, ie. rocks, sand, broken up coal ,crushed stone,hot wheels cars and trucks etc
@twiztedmowers2
@twiztedmowers2 5 лет назад
Yeah I'm having fun with making a freight train of 60 cars so far. There are some scratch made cars of mine that run better then other well known cars. And yeah I love power and I'm gonna use about 6 or 7 locos for power
@thetobin8or
@thetobin8or 6 лет назад
you can get wheel weights at Harbor Frt for cheap in 1/2 & 3/4 oz.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Great tip! Harbor Freight had that magnifying visor for cheap too!
@bumpingpost
@bumpingpost 4 года назад
I built a spreadsheet using Google Sheets (or you could use Microsoft Excel) to calculate the weights for various lengths... create a link to the spreadsheet on your phone... in some cases I use BBs as weights... thanks for the video.
@mrinkboy1
@mrinkboy1 6 лет назад
Great video, I use BB's for BB guns for weighing my cars
@mgr_video_productions
@mgr_video_productions 6 лет назад
Great video John!
@plumbingstuffinoregon2471
@plumbingstuffinoregon2471 3 года назад
I agree, you should use any excuse to add more power. Much more fun that way!
@normanriedmueller1453
@normanriedmueller1453 4 года назад
This video does not make it clear that the length measurement to be used is that of the "car body" (to quote RP-20.1, 5th para. and scale table of weights). You can see that it is the body length being measured on the video; but the speaker never makes it explicit.
@tsgmultimedia
@tsgmultimedia 4 года назад
Norman, RP stands for "Recommended Practice." If your car is a tenth of an ounce over or under, it won't affect anything.
@richardnelson-ux1zz
@richardnelson-ux1zz Год назад
Where can I get thevnnra weight chart for o gauge rolling stock
@elleryparsons5766
@elleryparsons5766 4 года назад
Love it!
@762Media42
@762Media42 6 лет назад
Nice job mate hopefully dan can return
@tsgmultimedia
@tsgmultimedia 6 лет назад
Thanks!
@r.a.monigold9789
@r.a.monigold9789 6 лет назад
THANK YOU ...
@trainfan25stewart16
@trainfan25stewart16 6 лет назад
I use safty pins for open wagons
@tsgmultimedia
@tsgmultimedia 6 лет назад
That is a neat idea. They are nice and flat!
@HLTrains5003
@HLTrains5003 2 года назад
at this time, there are 844 likes, paying homage to the Union Pacific #844
@gvet47
@gvet47 2 года назад
Found this video but it really did not touch on how to get different manufacture car apart. I have some Bachmann passenger cars and looks like they may be glued by end tabs. Also how much should engines weigh to develop good traction and not derail? I think the tender is very light too.
@jenniferwhite6089
@jenniferwhite6089 6 лет назад
you could use a file or sander to take off the weight if it too heavy
@tsgmultimedia
@tsgmultimedia 6 лет назад
This is true!
@ryzenforce
@ryzenforce 2 года назад
I need some clarification. In the example with the 4" car, the rule for N scale returns 1.1 once to be added. What about the weight of the car itself? If the car is already at 1 once, do we still add 1.1 once to it for a total of 2.1 once, or do we just add 0.1 once? Thx and great video! Edit: Also, why the length of the car influences the weigth in model railroad? I would have thought that you want all car to weight the same because as you said, if a light car hooked to heavier ones you it could get it derailed in a curve. For example, in the N scale if the longest car possible is let's say 8", then 1.7 once should be the weight of every car in a N scale consist.
@tsgmultimedia
@tsgmultimedia 2 года назад
Please refer to NMRA recommended practices table 20.1 for more information.
@trentonlee9700
@trentonlee9700 6 лет назад
Great video
@dotbmp
@dotbmp 3 года назад
is the NMRA standard modelling what works best for cars not strinlining? or is it simulating an average loaded car? how does it work out to take the real weights of the car and scale it down?
@Juxen4021
@Juxen4021 6 лет назад
That flatcar w/load at 05:51 looks really good. Does anyone know where the tie plates, spike barrels, and toolkits are from?
@tsgmultimedia
@tsgmultimedia 6 лет назад
Not sure, but I would bet there are from "regular" manufacturers like details west or detail associates. If you really need them and can't find them, let me know and I will ask the person whose layout the image is from. He might remember.
@cfdtv1
@cfdtv1 3 года назад
Nice video. Thanks. One thing I haven't seen (I could have missed it and I haven't read everything) is this the empty weight or is this a loaded weight?
@book1957
@book1957 6 лет назад
I use lead sheet on livestock cars. Can still see through cars. Still trying to find way to weight open auto racks.
@tsgmultimedia
@tsgmultimedia 6 лет назад
Maybe some hidden weight under the deck?
@tk00903
@tk00903 2 года назад
Like you're information, could be a little more animated. You are a good looking guy, a little more animation and you would rock it 😉.
@tk00903
@tk00903 2 года назад
Forgot to thank you for the weight chart, genius. 👍
@elleryparsons5766
@elleryparsons5766 4 года назад
They should have a thicker weight for each car if under weight.
@GruffaloDrone
@GruffaloDrone 10 месяцев назад
Hello, nice work and useful information you provided. I would like to ask, the weight of the car, should be the recommend by the NMRA independently of the train length or has to be adjusted? For example longer train then havier cars?
@tsgmultimedia
@tsgmultimedia 10 месяцев назад
Look up NMRA RP-20.1 and let us know if it mentions anything about adjusting due to train length. That should make for interesting reading! Also note that RP stands for "Recommended Practice" so that does not fall under the umbrella of standards which are more rigid.
@GruffaloDrone
@GruffaloDrone 10 месяцев назад
​@@tsgmultimediaIt doesn't say anything about weight adjustment according to the train length but as I understand, we should fix the car weight to the recommended value. Although does this happening in the real world also? The cars are being loaded to the recommended value? Please correct me if I am missing something; Is it a good practice for a long train to set havier cars in the front and the lightest cars in the rear? Although it doesn't really matter on Model Trains as every car has the same weight. Or not? Maybe, if we don't have enough locomotives for a long train, then a lighter car is a good practice in the rear? I also like a long train with many locomotives!!!! And finally, does it matter where the locomotives are located in the long train? If we have 3 of them, is it the same to put all them in the front, or to spread them in various locations?
@Dymond_Y2K
@Dymond_Y2K 6 лет назад
Hey John.. two things.. Maybe throw a link to your app in the description? Also not sure if its a 101 thing but it seems to me one of the things most lacking for people new to the hobby is building the layout.. specifically the frame etc..
@JoslinModels
@JoslinModels 6 лет назад
David Gerard, type "Model Railroad Benchwork" into your RU-vid search bar. There are literally dozens (if not hundreds) of videos on this topic already.
@tsgmultimedia
@tsgmultimedia 6 лет назад
There are many videos about a lot of things out there, but a lot of them are hard to watch!
@Dymond_Y2K
@Dymond_Y2K 6 лет назад
Nail on head!
Далее
Model Railroading 101 What is JMRI? MR101
44:44
Просмотров 116 тыс.
Model Railroading 101 Freight Cars For Beginners
34:51
Просмотров 113 тыс.
Car Weights-How Much Is Enough (202)
29:10
Просмотров 31 тыс.
Model Railroading 101 Passenger Cars For Beginners
40:27
Inconvenient Truth About KD Couplers (216)
21:05
Просмотров 96 тыс.
Add Tungsten Putty To Your Model Trains
13:06
Просмотров 3,3 тыс.
Model Railroading 101 DC and DCC For Beginners
25:47
Просмотров 270 тыс.
Ban Derailments With Track Work Tips And Tricks (258)
23:12