Тёмный

Modified Harbor Freight 5 Gallon Air Tank. Will it take Lug Nuts off? 

Shiny Knife
Подписаться 10 тыс.
Просмотров 22 тыс.
50% 1

Quick look and walk through of how I modified my 5 gallon Harbor Freight Air Tank. I forgot to mention in the video that I changed the hose from 1/4 to 3/8.. Thanks For Watching! If you enjoyed or found this video helpful please rate the video..
The Air gun I used • KOBALT 1/2 IN 700 FT-L...

Авто/Мото

Опубликовано:

 

22 дек 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 122   
@BluegrassBushcraft
@BluegrassBushcraft 6 лет назад
I was really surprised to see it take off more than one. I modified my tank a few years ago. Never thought of filling it through the hise. Great idea. Thanks for sharing.
@ShinyKnife
@ShinyKnife 6 лет назад
Yup I was surprised to. The Air gun is a 700 ft pounds gun, that was probably the difference. It doesn’t take much Air to get them off.. I was going to to change the manifold but after looking at it I saw when the valve is open on the output side it has a huge air Valley.. that’s where I came up with filling it on the hose side.
@scottmayle1955
@scottmayle1955 Год назад
Great video, I'm glad that you decided to post it. I was really surprised by how much you got accomplished with a 5 gallon tank. Great commentary as well. God bless.
@ShinyKnife
@ShinyKnife Год назад
Thanks, I appreciate the kind words!
@HarryBallsss
@HarryBallsss 11 месяцев назад
Awesome video my friend…. I just bought one. Question for you - this setup wouldn’t help me because I fill my tank up at the gas station, right? I only bought mine to fill my tire up that goes down once in a blue moon:
@ShinyKnife
@ShinyKnife 11 месяцев назад
@@HarryBallsss probably not unless the gas station can pump it up to 120 pounds. Which is unlikely
@HarryBallsss
@HarryBallsss 11 месяцев назад
@@ShinyKnife good call. thanks so much!
@ShinyKnife
@ShinyKnife 11 месяцев назад
@@HarryBallsss welcome
@NathansFerroceriumrods1
@NathansFerroceriumrods1 6 лет назад
Good job with the modifications. Merry Christmas. I have neighbors that like to turn up the music. I light a fire and smoke them out. The smoke goes straight to their house.
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks buddy, yeah they was having a Christmas party I just didn’t know at the time.. the fire thing sounds funny lol I’ll have to try and smoke them out sometime
@stevecampos5481
@stevecampos5481 4 года назад
Thanks for the advice....just did it to my tank it works perfectly
@ShinyKnife
@ShinyKnife 4 года назад
Awesome glad it works!
@russellkasen1920
@russellkasen1920 3 года назад
i dont mean to be off topic but does someone know a trick to get back into an instagram account? I somehow forgot my password. I appreciate any assistance you can give me!
@westleyalfonso5303
@westleyalfonso5303 3 года назад
@Russell Kasen instablaster ;)
@DeEagle
@DeEagle 6 лет назад
I knew you could do it with that. I play around with the bigger one like you have in the garage . Great job my friend.
@ShinyKnife
@ShinyKnife 6 лет назад
I’m kicking myself for not buying the big one now. I may pick one up after Christmas and tie it in to my compressor as a helper tank
@ShinyKnife
@ShinyKnife 5 лет назад
Defdakilla41 I recently done that with the 11 gallon tank. Works so much better.
@garoglen
@garoglen 5 лет назад
I have the same ideas when I get around to it , I've has several of these HF air tanks , the red plastic knob on the intake manifold usually starts slipping when I tighten it to really get a good cut off of the air , I solved this by getting an manifold with a metal knob available from most auto parts stores for around $10 .
@ShinyKnife
@ShinyKnife 5 лет назад
Yeah I agree that’s the weak part for sure. The gauge seals are starting to leak air too. I’m going to change it out soon
@DriveShaftDrew
@DriveShaftDrew 6 лет назад
well happy holidays and Merry Christmas great set up good job
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks buddy
@Jason-Jason
@Jason-Jason 4 года назад
Thanks for sharing, cool stuff
@ShinyKnife
@ShinyKnife 4 года назад
Thanks for watching, appreciate it!
@stype9773
@stype9773 6 лет назад
Small ,but a real thing,Richie . Merry Christmas and a Happy New Year to your family and you,my friend !!
@ShinyKnife
@ShinyKnife 6 лет назад
Yeah it’s really small.. I just use it to pump tires up with. Was just curious if it would run the Air gun
@ShinyKnife
@ShinyKnife 6 лет назад
Happy holidays to you and your family my Friend
@Jsellers1965
@Jsellers1965 6 лет назад
Thats awesome! You must have pumped that thing up good
@ShinyKnife
@ShinyKnife 6 лет назад
120 PSI
@Bettinasisrg
@Bettinasisrg 5 лет назад
First, thanks for posting, love your accent (don't worry I'm a woman) lol but there's one of these at an auction for $10, and you made my decision, I'm bidding! Thanks again.
@ShinyKnife
@ShinyKnife 5 лет назад
Thanks lol appreciate that. Southern NC accent. $10 is a great price you can’t go wrong with it.
@geargriden19
@geargriden19 6 лет назад
Well that's awesome shit right there SK!! Thanks for showing what you done to make it work too!! You need a ricer with a fart can to annoy the neighbors with hahaha!! Merry Christmas or whatever it is you may do!! Happy New Year Too!! *Have a good'nnn*
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks buddy, yeah they are having a Christmas party with live music. So I’ll be nice hehe for now
@robertgorge1152
@robertgorge1152 Год назад
Good video.
@ShinyKnife
@ShinyKnife Год назад
Thanks, I appreciate it
@mckwilly
@mckwilly 6 лет назад
Very cool
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks Buddy
@homerunner7772
@homerunner7772 6 лет назад
Awesome!
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks, I appreciate it
@SaraSue
@SaraSue 6 лет назад
interesting video
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks Sara
@homespunware6315
@homespunware6315 5 лет назад
Walmart has the Briggs and Stratton 7 Gallon (larger) for the same price. And it has all 4 of its legs. Otherwise it comes with the same crappy plumbing that needs replacing as seen here. It can also be filled through the outlet hose the same way as demonstrated here.
@ShinyKnife
@ShinyKnife 5 лет назад
Awesome. How much is it? Looking back wish I had bought the 11 gallon one for $39
@homespunware6315
@homespunware6315 5 лет назад
@@ShinyKnife - I got mine last week on clearance for $22 due to a damaged box, but even regular price at Walmart is $29.88 right now. (MODEL: Briggs & Stratton 9000741, 7 Gallon 125 PSI Air Tank). My recent purchase of this Walmart tank is what led to me going on the prowl for ideas like yours to see if upgrading the valves was even possible. I'd already had the extra fittings to do the "fill through the outlet hose" idea, but your video confirmed I was doing it correctly - thanks.
@ShinyKnife
@ShinyKnife 5 лет назад
Your welcome. Thanks for watching
@txnaf1420
@txnaf1420 Год назад
lol A Festivus for the rest of us.
@ShinyKnife
@ShinyKnife Год назад
Lol 😝
@John-vk1ij
@John-vk1ij 4 года назад
If you use this air tank as a dust cleaner, like for a small home project, how long can it last and can still blow effectively?
@ShinyKnife
@ShinyKnife 4 года назад
I don’t know? Try it
@johnstratton5637
@johnstratton5637 4 года назад
hi i was wonder did u buy the hose to change the setup u have in the video if so were can i buy that kind of hose from what sizes hose and how did u make the connect ends what sizes for them also i just bought the same air tank u have in the video
@ShinyKnife
@ShinyKnife 4 года назад
I bought the hose at harbor freight it’s a 3/8 line. With 1/4 inch fittings.
@ValerieReese
@ValerieReese 6 лет назад
I thought 3. That did really good.
@ShinyKnife
@ShinyKnife 6 лет назад
Yup it did better than I thought it would
@RAULHERNANDEZ-um5fm
@RAULHERNANDEZ-um5fm 5 лет назад
You think is a good idea to take on of those thanks off road to fill up my tires ? 37x13.5x18 .
@ShinyKnife
@ShinyKnife 5 лет назад
I’d get the 11 gallon one for off-road tires. It will pump up a couple tires. But for bigger off road ties I’d go with a bigger tank. Unless you just need it to top off tires
@RAULHERNANDEZ-um5fm
@RAULHERNANDEZ-um5fm 5 лет назад
@@ShinyKnife thanks
@xpmark1
@xpmark1 4 года назад
Will that trick work with 1/2 inch air impact wrench and its CFM requirements?
@ShinyKnife
@ShinyKnife 4 года назад
Yeah the gun I’m using in the video is 1/2 inch just necked down to a 3/8 adapter
@soundretarded
@soundretarded 3 года назад
Wow 😯
@ShinyKnife
@ShinyKnife 3 года назад
Haha thanks
@karthikvasu6655
@karthikvasu6655 3 года назад
Is this tank is work for air wrench gun?
@ShinyKnife
@ShinyKnife 3 года назад
Yes it’ll work in a pinch. you really need a good air compressor tho
@JiggaJoo
@JiggaJoo 6 лет назад
All of my air tools say that they should be operated at like 65 psi or so. I just bought a spare air tank myself and noticed that there's no regulator like yours (just the pressure gauge for the whole tank). Is it safe to full up my tank to like 135 and use my tools off of it until it just depletes? Or can I expect to do some damage to my tools?
@ShinyKnife
@ShinyKnife 6 лет назад
I doubt 135psi would damage a air tool. It will only be at 135 to start with . If your worried about it buy a regulator and install in between your tool and tank.
@JiggaJoo
@JiggaJoo 6 лет назад
Sounds about right. Thanks, I appreciate the reply... I assume my impact wrench will break free once it reaches its torque limit so I shouldn't need to worry about over pressurizing it too much but I wonder if my chisel might just shoot across the room. We'll see :). Thanks again
@roberttijerina6717
@roberttijerina6717 3 года назад
Does this keep the same Cfm and pressure as running from your compressor?
@ShinyKnife
@ShinyKnife 3 года назад
No it will drop as soon as you start the tool. I was just seeing if it would work
@roberttijerina6717
@roberttijerina6717 3 года назад
I have a 10 gallon 5.3 cfm and I was wanting to add a 11 gallon auxiliary will it run the same with my air tools ?
@roberttijerina6717
@roberttijerina6717 3 года назад
@@ShinyKnife I meant if you kept it connected as a auxiliary tank just to add more air .
@ShinyKnife
@ShinyKnife 3 года назад
Yes as long as it’s inline before the regulator. It’ll hold more volume of air. It’ll just take longer for the compressor to kick on. Be careful though. It’ll burn your compressor up if you run it past the duty cycle of the compressor motor.
@cdieter88
@cdieter88 6 лет назад
Cool hack buddy
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks bro
@ShinyKnife
@ShinyKnife 6 лет назад
Not nascar speed haha but it’ll get it done
@cdieter88
@cdieter88 6 лет назад
It's about 20 grand for NASCAR speed
@ShinyKnife
@ShinyKnife 6 лет назад
Nah you can get one for about 2 grand
@DirtandRust
@DirtandRust 6 лет назад
Rookie question..but could that compressor operate an air brush for art?
@ShinyKnife
@ShinyKnife 6 лет назад
Yeah but if your painting you need a air dryer to keep the moisture out. This is just a air tank. But it would work in a pinch
@DirtandRust
@DirtandRust 6 лет назад
Got it...ty👍
@ShinyKnife
@ShinyKnife 6 лет назад
Here’s a perfect setup for you on the cheap www.harborfreight.com/1-6-hp-40-psi-oilless-airbrush-compressor-93657.html
@DirtandRust
@DirtandRust 6 лет назад
Shiny Knife ...thanks...bud
@filipecosta8750
@filipecosta8750 4 года назад
What about a paddle board?
@ShinyKnife
@ShinyKnife 4 года назад
Yeah man sure 👍
@MrFullautoak47
@MrFullautoak47 6 лет назад
Watching this with my new harbor freight 10 dollar wireless headphones... It has static but we hear ya ! They is cheesy !
@ShinyKnife
@ShinyKnife 6 лет назад
lol get what you pay for right
@MrFullautoak47
@MrFullautoak47 6 лет назад
Yups! Not scared to take em in da woods though :) I just have to pretend the crackling noises is a fire !
@ShinyKnife
@ShinyKnife 6 лет назад
That’s the spirit lol 😆
@DeEagle
@DeEagle 6 лет назад
5 lug nuts my friend.
@ShinyKnife
@ShinyKnife 6 лет назад
Haha yup
@barese420
@barese420 6 лет назад
Another big thumbs up my friend welcome to my channel 💕🎅🎅🎅🎅🎅
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks buddy
@AlessioSangalli
@AlessioSangalli 5 лет назад
Hello nice but lug nuts should be removed and installed in a star pattern
@ShinyKnife
@ShinyKnife 5 лет назад
It’s a junked vehicle with a broke tranny. I wasn’t trying to demonstrate the “ Correct” way to take lugs off. the video was about the air tank. But thanks for pointing out the right way to do it. Appreciate your help.
@maeu59
@maeu59 3 года назад
What pressure air gone is that?
@ShinyKnife
@ShinyKnife 3 года назад
90 PSI but that tank will only be at 120 psi for a few seconds. So it want hurt it
@maeu59
@maeu59 3 года назад
@@ShinyKnife I really meant what was the scfm gun rating. I have a small 135 psi 2 gallon compressor with a 2.2 scfm @90 psi. Was wondering if I could run an air gun.
@ShinyKnife
@ShinyKnife 3 года назад
@@maeu59 probably about 3.5 SCFM I’m not sure. That’s what my compressor does
@ShinyKnife
@ShinyKnife 3 года назад
I’ve got a small harbor freight tank with the same SCFM and it’ll take five lugs off but then you have to wait for the tank to pump back up. So it’ll work. Just not very good
@roberttijerina6717
@roberttijerina6717 3 года назад
I have a 5.3 cfm compressor if I use this as an auxiliary tank will it keep that same Cfm or pressure?
@mArt1And00m3r11339
@mArt1And00m3r11339 6 лет назад
It reminds me of a train's engine.
@ShinyKnife
@ShinyKnife 6 лет назад
lol 😂
@sdriza
@sdriza Год назад
2-3
@ShinyKnife
@ShinyKnife Год назад
It’ll get them all
@RichardCossia
@RichardCossia 3 года назад
3
@ShinyKnife
@ShinyKnife 3 года назад
Thanks for guessing!
@massachusettsprepper
@massachusettsprepper 6 лет назад
You are pissing me off brother. Your in shorts and I can't go outside without a winter coat on LOL. And I say you will get off 5 lug nuts now continue to play video. Well I do believe if you wouldn't have had the ranch in the wrong direction you would got all five of those off with the year that was in the tank. So it definitely looks like it's worth the money you paid for it for sure. And brother I hope you and yours have a very Merry Christmas indeed my friend. And send some of that warm weather up here to Massachusetts. Thanks for sharing my friend.
@ShinyKnife
@ShinyKnife 6 лет назад
Haha yeah it was 70 degrees out. Appreciate you watching. Yup the tank is not bad for the money. I wasted a bunch of the air in the tank.. I did it again after I filmed and took five off and put five back on..
@CavvyStudios
@CavvyStudios 5 лет назад
If you look closely, you can see that he's actualy wearing a fur suit under the shorts and t-shirt.
@ShinyKnife
@ShinyKnife 4 года назад
Brian lol 😂 I just saw this comment.. that’s so funny
@PjDanita
@PjDanita 6 лет назад
Paused and guessing 2.
@ShinyKnife
@ShinyKnife 6 лет назад
Nope got them all
@juniperbush7170
@juniperbush7170 5 лет назад
It doesn't seat tires, it's useless! You have to have a high pressure blow nozzle to seat a new tire, then you can fill it up air. Where's the tank with the high pressure blow nozzle?
@ShinyKnife
@ShinyKnife 5 лет назад
It’s not a bead seater. It’s just a air tank.
@CarolinaChrisOutdoors
@CarolinaChrisOutdoors 6 лет назад
5
@ShinyKnife
@ShinyKnife 6 лет назад
Yup
@CarolinaChrisOutdoors
@CarolinaChrisOutdoors 6 лет назад
Shiny Knife - wow! I wasn't even finished watching yet... your quick! Merry Christmas!!!
@ShinyKnife
@ShinyKnife 6 лет назад
I was going through the comments when I saw it lol
@ShinyKnife
@ShinyKnife 6 лет назад
Merry Christmas buddy
@DelvisD305
@DelvisD305 6 лет назад
Cool Air tank I have one I use everyday. Big thumb up. Visit us for friendship and support Merry Christmas and Happy New Year 2018
@ShinyKnife
@ShinyKnife 6 лет назад
Thanks. I’ll definitely check your channel out
@70smithjd
@70smithjd 6 лет назад
3
@ShinyKnife
@ShinyKnife 6 лет назад
Nah it’ll get em all
@danielsaldana2329
@danielsaldana2329 5 лет назад
4
@ShinyKnife
@ShinyKnife 5 лет назад
Haha yup
Далее
Harbor Freight - Portable Air Tank Modification
16:06
Can you Run Air Tools Off of a 6-8 Gallon Compressor?
4:18
Make a Propane Air Tank QUICK N EASY
9:37
Просмотров 392 тыс.
Cheap Upgrades for Cheap Air Compressors!
23:26
Просмотров 283 тыс.
Portable air tank modification and Quick Tips
3:00
Просмотров 49 тыс.
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
Просмотров 4,3 млн
HONDA ACCORD 😵‍💫 ФИШКИ ГНИЛУШКИ!
0:56
Мальчик стал гонщиком в 5 лет
0:14