Тёмный

Modify An Impact Mill for Better Results !!!! .ask Jeff Williams. 

Ask Jeff Williams
Подписаться 334 тыс.
Просмотров 83 тыс.
50% 1

Modify your K & M Impact Mill for better results plus extra info on different types of mills for Gold Ore. If you crush rocks to get Gold then you will want to know this.
/ askjeffwilliams
We cover some tip and tricks for K & M Owners and we talk about
If you would like your own K&M Crusher , then get a hold of Steve over at Make your own Gold bars and let him know that Jeff and Slim sent you and he will give you a good deal.
www.makeyourowngoldbars.com/ro...
For larger Mills including Ball mills get a
hold of David at 911 metallurgist and he will take care of you.
www.911metallurgist.com/equip...
( NOTE.... We meant to say Flange not Pillow Block Bearing and yes a lovejoy coupling )
This video was made possible because of Patreon support from awesome people like ;
Jayden Ackroyd, Taco Online, Dennis Dayton aka Idiana Gold Hunter, Leif Petter A Smuk, Michael Satterfield, Jason Brown, Rudy Andrian, Denny Loften, Jake Knudson, Daryl Rosenberg, Thomas Struk, George Prislupski, Leo Rodriques, Richie A, Alan Story, Steven Keith Tuller, Brett W McKelvie, Brando Alderman, Michael Peterson, Don and Connor Gartland, Ben Bruenderman, John Del Grosso, Andrew Ebbing, Justin Parker, Lucas Thompson, John Chaney, Brandon Kenyon, Bruce Ueno, David Miller, Jimmy Mott, Leonard Chmilar, Ricky Ruiz, Zac Chambers, Benjamin D Edwards, John and Cecilia Livestay, Patricia Barr, Matthew Wheeler, Michael James Walker, James Walker, Shannon Rundquist, Tom Knackstedt, Josh Todd, Anthony Kornasiewicz, Todd Chernesky, John Hartley, G. R. Underwood, Jesse Belcher, Kristopher Kenyon, Michael Price, Gregory Pucher, Mikes Gold Paydirt, Jasper Preston, David Joe Trudell, Tom Gwilt, Tom Zeman, Edward Wright, Mike Mills, Joseph Maez, Matthew Nanoski, Darrell Martin, Richard H Warnock, The Sturgill Family, Christopher Hatton Wild, Christopher Young, Curtis ( Corky ) Hardy, Ray Villiard, Steve Ramsey, Rene Paz, Jim Smith, Curtis Myers, Robert Triggs, Daniel Bradbury, Adam Dailey, Scott R Younie, Jim Younie, Shaun and Deborah Delcambre, Jake Carlton, Ronald Tovtvar, Michael Brick, Wil Robo, Chris Prospector, Dan Ballard, Christopher Harrison, Jim Jecker, Steve R Williams, Larry Englehart, Stoney Wallace, Jeff Harville, Ted Zingarelli, Keith Perron, AJ Witten, Grace plus Dad Trip, Ken Merriman, Fernadez Smith, Richy Salgado, Brandht MacDuffee, Andy White, Patrick Ockenfels, Richard Marucha, David Edgar, Lynn Smith, Robert " BoBo " Perry, Michael Terry, Loren Raleigh, Linda and Craig Olsen, Rory Romero, JKnudtson17, Benjamin Kopper, Jacob Miller, Lora Green, Jeff Aregood, Robert McBeath, Bruce Hodge, Ronald Patrick Meyer, Billy Schrider, Curtis Berry, Leo Briand, " DirtBike " Dave Cohen, iStayuGo, Tim Pratt, Caleb and Sierra Crawford, Larry Cole, Wyatt James Taylor, Craig J Baker, Brandan Blankership, John Shaw, Kaden Bosnell, Jenna Young, Jeff Millikan, Trevor Hylle, Joshua Trontvet, Clark Morrison, more old stuff.com, Jay Wagner, Nikolai Flint, Ben Bowman, Jason Higdon, Gary Farebrother, gary Shelton, Dennis M Jerrell Sr. David Lester, Brandon Dixon, Evilos, William Moses Rinker, Ryan Sullivan, Julian Larsen, Curtis Jenkins, Dan Di Carlos, Craig Martin, James Gibson, David Bellamy, Chris Hammond, Armando Prado, Jerry Garretson Jr., Hagen Tannberg, Mare, Richard Jones, Kristopher Young, Dan Blair, Dallas Villanueva, Randal Hudson, Anthony Sadowski, Jordan Armstrong, Steven R Williams, Lars ( maybe from Metallica ) Marc Mitchell, Keru, William " Billy Bob " Butcher, Edward Steven, Mark Silvestro, Hart Epps, Lorie Franceschi, Mark Stephen, Robert Cartwright, Jonathan and McKenzie Cohen ( The Happy Dancer ), Brian Morris, Kyle Ledbetter, Tony Berby, Thomas McQuire,, Duane Robertson, Melchor Apodaca, Mike Mixon, Sean Ashley, Brian M., Joel Stigner, Michael Scott Gillispie, Robert Dunn, Sarah Foley, Sarah and Nick Potter, John Olsen, Chris Wright, Gene Ingram, Kim Varian, Hyrum Adamson, Robert Helmig, Robert Abreu, Steve Hawkins, Smokin Lizard, Robert Berget, Lonnie Trickel, Curt Lessard, Judd and Myra Wilkinson, Janis Brants Brennan ........
and many many more awesome people.
Thank you so much for your support.
If you would like to become a Premium Patron and would like to see you name in the credits and get your ideas put into video
PLUS- be automatically entered for Gold Giveaways
then just click onto Patreon / askjeffwilliams
and make a pledge of $ 10.00 or more ....It's that easy.....

Развлечения

Опубликовано:

 

16 янв 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 187   
@stephensalamone2966
@stephensalamone2966 7 лет назад
GPAA 3 year Member Reno NV. 1970 right after high school on the American river with a hand made 3" dredge with my friends we had GOLD FEVER !!! Have never lost that filling !!! Love your videos !!
@chrishenningsen5568
@chrishenningsen5568 7 лет назад
the coupler is known as a LoveJoy coupler, commonly used in industrial motor applications. we use them at our power plant in Sonora, CA for all our pumps and some of our gearboxes. very important to make sure the couplers are lined up very close to perfectly all the way around, or they tend to chew through those rubber coupler pieces quite quickly.
@BullProspecting
@BullProspecting 4 года назад
I ordered the 14" and saved money!! Thank you Jeff and slim! I will mail you guys some New England gold when I'm up and running!! This is the best day ever!!
@beepseatsfindingfoodtreasu8756
Jeff you are a geological encyclopedia of information, I always look forward to your videos and the fun tutorial format that you painstakingly produce. Thank you.
@montanamasume2387
@montanamasume2387 7 лет назад
Great video Jeff thanks for taking the time to make them!!!
@kennedyjared
@kennedyjared 4 года назад
We modified my 11in gas KN crusher with the side mount and chain modifications. Also added a 12 inch 1/2 inch steel hopper on top. Wow this thing works great now. Huge improvement! Doesnt jam much and doesnt go through screens like it did before. Love the great information. Wanted to say thanks
@Askjeffwilliams
@Askjeffwilliams 4 года назад
Very cool! yep that should do the trick now.
@DavidMcDonaldmrboogie
@DavidMcDonaldmrboogie 7 лет назад
Jeff, You just keep getting better & better at these videos...
@cr4zym4tt
@cr4zym4tt 7 лет назад
never stop Jeff! always entertaining.
@hippiehorselover
@hippiehorselover 7 лет назад
Thanks for the awesome video! I always enjoy them =)
@tinytattoomike7943
@tinytattoomike7943 7 лет назад
Great video It's always a good day when I start it off watching one of your shows
@Askjeffwilliams
@Askjeffwilliams 7 лет назад
Thanks Micheal.
@tanksoldier9770
@tanksoldier9770 4 года назад
These are always great to watch again , TANK
@Askjeffwilliams
@Askjeffwilliams 4 года назад
thanks
@tedjelke8291
@tedjelke8291 7 лет назад
thanks, Jeff W., great job! take care ...🙂
@oldgriz816
@oldgriz816 7 лет назад
I really appreciate you sharing how not to do things. Like showing where the best place is for the discharge chute. Nothing better than learning from the best.
@DWCStuff
@DWCStuff Год назад
I know I've watched all your videos before. I'm so happy that they're still up and running. You forget stuff as you get older. Lol thanks a lot
@Askjeffwilliams
@Askjeffwilliams Год назад
you betcha
@michaelbrick9730
@michaelbrick9730 7 лет назад
Jeff, That was 'EXCELLENT', you shd charge the manufacture for all of that upgrade information and I really paid attention to all of that stuff too....Thks again....signed Brickhouse.................
@warlilatumena5201
@warlilatumena5201 7 лет назад
Jeff, thank you for many information that I could get form your website.
@Askjeffwilliams
@Askjeffwilliams 7 лет назад
always our pleasure.
@MaximumCatfishing
@MaximumCatfishing 7 лет назад
Great amount of useful info! +1 for the use of "Gravitational Separation Unit!"
@Famo59
@Famo59 7 лет назад
Hi Jeff and Slim.. That was great you went into more detail on the impact mill.. I still like the one YOU made..!!!! Regards Tony..👍⛏🍺
@charlesboston1
@charlesboston1 7 лет назад
i've also found that running the crusher wet will reduce the dust , but i have to make 2 or 3 passes to get the crush sized small enough ( the internal screens where removed to prevent plugging )
@lendoggy2
@lendoggy2 6 лет назад
thanks for the video, lots of good useful information there. regards to Slim.
@stevemazzara8178
@stevemazzara8178 7 лет назад
Hi Jeff, Great explanation how the K & M Impact Mill operates and like your tips for optimal operation - love the craziness too! Where's our friend Nevada Jack? Say hi to the Crew, and of course grumpy old Slim. Take care my busy friend. See ya soon.
@garyhost3087
@garyhost3087 7 лет назад
Top job Jeff Love ya work !!
@the_lancaster_libertarian
@the_lancaster_libertarian 7 лет назад
lovejoy drive couplers. i used to make them. theyre also used in fire pump priming motors.
@slopoke1012000
@slopoke1012000 7 лет назад
Lots of good info Jeff,
@coryyoung1341
@coryyoung1341 7 лет назад
more great info, thanks jeff
@billhallett7765
@billhallett7765 7 лет назад
cool ring, thanks for the information, helped alot in getting started, found a few pieces, so come on lets go
@RJM1011
@RJM1011 7 лет назад
Thank you Jeff. :)
@mjhound
@mjhound 7 лет назад
I made one 20 inches wide 20 inches in diameter with a five horse Briggs it has double bearings one on the coverplate but is going to have the lower half removable for quick clean outs and the whole top half and bearing removable for repair/maintenance with Ar 500 or some high manganese steel breaker bar strips welded in. Thanks for the videos they are definitely entertaining and informative and keep me motivated
@Askjeffwilliams
@Askjeffwilliams 7 лет назад
you betcha my friend.
@user-lv4co4cb8m
@user-lv4co4cb8m 6 лет назад
HELLO, İMPACT MİLL FOR SALE ON MY CHANNEL. VERY CHEAP 250 USD
@luckystrike66
@luckystrike66 7 лет назад
learning a lot, thank you Jeff!
@Askjeffwilliams
@Askjeffwilliams 7 лет назад
you betcha Lucky Strike.
@linedog19delta
@linedog19delta 7 лет назад
Good job Jeff
@EdBragg
@EdBragg 7 лет назад
love the video Jeff and Slim. looking forward to the jaw crusher video. not sure I've ever seen one. Ed
@edjrmorgan
@edjrmorgan 7 лет назад
Great vid and. The info!
@ProfessorGrimm
@ProfessorGrimm 7 лет назад
great video Jeff.
@mikewest3108
@mikewest3108 7 лет назад
Love your channel Jeff. :-)
@TheGamersOfAuz
@TheGamersOfAuz 7 лет назад
Great episode
@kennethmoertel3949
@kennethmoertel3949 7 лет назад
Great vid Jeff :)
@josephpecoul6532
@josephpecoul6532 4 года назад
Thanks Jeff
@Askjeffwilliams
@Askjeffwilliams 4 года назад
you betcha
@007jacquie
@007jacquie 7 лет назад
★Awesome Report Thank-you!
@goldminer49niner42
@goldminer49niner42 7 лет назад
Cool thanks for tips
@bearkat4160
@bearkat4160 7 лет назад
I have that mill except with a 6.5 hp motor on it instead of the electric one you got. Pretty cool machine.
@coogshunt3626
@coogshunt3626 7 лет назад
Slim!!!!My precious! !!!I love you .....Awesome Ring....Rock crusher sledge hammer style slim....Get in shape for mining GOLD ...Thanks for sharing. Jeff....&)
@cygnusx1363
@cygnusx1363 7 лет назад
Also, a guard on that LOVE JOY coupler is an EXCELLENT idea as clothing, hair, ect... can easily get caught in it.
@cygnusx1363
@cygnusx1363 7 лет назад
Also, if you mark the shaft where the set screw contacts it you can drill an indentation in the shaft just a hair bigger in diameter then the set screw. Use a file to clean up the shaft where the indentation was drilled, align and install the set screw, and that Love Joy Coupler wont slide on the shaft.
@toddalpert5095
@toddalpert5095 7 лет назад
finally found the video showing the inside workings , ill try an build one these simple enough , bearing being both on back side narrow grinder if nothing else larger dia shaft would allow wider crusher like the belt driver more then direct drive, belt can slip if it gets stuck .... if might be called when it gets stuck . screen fills up with limonite over fill , sure that happens
@Askjeffwilliams
@Askjeffwilliams 7 лет назад
Hi Todd, not hard to build just need to know where everything goes to make them work right.
@unrealdays5468
@unrealdays5468 7 лет назад
Gotta get me a mill, Just Got a crazy crusher and boy does it take a lot to break up the rocks...but I'm still figuring it out....... It works, but so do I..phew..(Aww man, I didn't pay my dues in nov!!... Want my mag with Slim and Jeff!..
@user-lv4co4cb8m
@user-lv4co4cb8m 6 лет назад
HELLO, İMPACT MİLL FOR SALE ON MY CHANNEL. VERY CHEAP 250 USD
@flaplaya
@flaplaya 7 лет назад
I would bet a half days wage those "strike plates" are a simple arc weld bead of Nickel Rod. I cold also make this mill significantly longer lasting and better using Manganese Steel. I've worked on machines that shot steel shot at the speed of sound constructed of Manganese.. Great video, get that Au!
@Rocksaplenty
@Rocksaplenty 5 лет назад
jeff you inspired me to buy a little gear and plan a trip up out of the panhandle, thanks
@Askjeffwilliams
@Askjeffwilliams 5 лет назад
well then keep us posted on your finds.
@rerush1052
@rerush1052 7 лет назад
thanks buddy
@tjsonic11
@tjsonic11 7 лет назад
good video thanks
@georgejohnson1537
@georgejohnson1537 7 лет назад
Nice setup ya got there. Good demonstration also (End of comment) LOL
@DavidGarcia-lf1ki
@DavidGarcia-lf1ki 3 года назад
It was a very good video
@go2zgoldhollum383
@go2zgoldhollum383 7 лет назад
Hey jeff, viking prospector here. Truely a fan an info is "top notch"! Can I send you a couple pics of a rock/gem/mineralized gold bearing (I hope) mass. Pretty awesome! Thanks Viking Prospector
@wilbradford619
@wilbradford619 5 лет назад
The slim ring is super cool😎👍
@Askjeffwilliams
@Askjeffwilliams 5 лет назад
yes they are
@thehighlander6378
@thehighlander6378 7 лет назад
I would love to see a series of videos on mining in some of the most unexcpected places
@frankenscience3553
@frankenscience3553 7 лет назад
hi jeff nice video. some guys are adding a dust collecting cyclone
@preciousplasticph
@preciousplasticph 3 года назад
A helpful hint. Old truck rims are perfect for this build
@michaelcalkins8079
@michaelcalkins8079 7 лет назад
Awsome video and Ring!!! Still waiting to buy your book one day Jeff. hint hint. lol
@djkirE
@djkirE 7 лет назад
Quick question, why do you recommend going with a gas engine in the field vs an electric motor? I have a generator and have been planning on going all electric for my equipment.
@robertbetts3953
@robertbetts3953 7 лет назад
your the best dude
@johnruckman2320
@johnruckman2320 7 лет назад
I like some of your DIY stuff and would like to see more on how to build. Check out ICMJ, April 2017, p. 15, The PIGMI, pneumatically improvised gold mining implement, and give us your thoughts on it and whether you would modify it.
@user-lv4co4cb8m
@user-lv4co4cb8m 6 лет назад
HELLO, İMPACT MİLL FOR SALE ON MY CHANNEL. VERY CHEAP 250 USD
@jeffhorton258
@jeffhorton258 7 лет назад
I think your Crazy but entertaining good information.
@Jarfiller
@Jarfiller 7 лет назад
I feel greedy for asking for a re-shoutout XD Thanks Jeff (and slim)
@BullProspecting
@BullProspecting 4 года назад
Jeff I was wondering if you have ever done a video using the K&M 14 inch Krusher? In your opinion, which would you prefer? The 11 inch or the 14inch?
@randyneil6161
@randyneil6161 7 лет назад
nice video
@reubenvalles917
@reubenvalles917 7 лет назад
Great Video! I wish we could have seen you or slim turn that bad boy on watched you work the equipment for a bit. I always love seeing that. What kt was the ring that you made the winner?
@GarnettM
@GarnettM 7 лет назад
Wonder if making a V shaped plate on the chains will force the fines out the screens better , It`ll go thru the rock ok if it has a case hardened weld on the edge , Be like a chisel tip going thru the rock .
@dwaynesprospectingadventur4994
I want a Slim Ring, That's bad ass.
@AshtrayAnnie
@AshtrayAnnie 6 лет назад
these videos when you're not fucking around are way better lol
@vahagnmelikyan2906
@vahagnmelikyan2906 Год назад
Can you make a video of rock crushing with open cover. So that we can see what's happening inside the crusher on slow motion?
@Askjeffwilliams
@Askjeffwilliams Год назад
sure
@angieswyers5633
@angieswyers5633 7 лет назад
How you been doing Jeff. I will have to catch up on here..
@landlockedviking
@landlockedviking 7 лет назад
That was a lovejoy coupling....
@edsonkidwell9813
@edsonkidwell9813 5 лет назад
Jeff loved the ring it would also be a killer hat band in the tradition of us cavalary. If in you get my drift sonny jim
@Askjeffwilliams
@Askjeffwilliams 5 лет назад
good idea.....
@MrErikm
@MrErikm 7 лет назад
Jeff Slim, how about an actual diy /how to make one of these bad boys? i mean $1000 for entry level crusher is expensive thats more then the mine cost. now i know what your going to say, so i think a smaller version for sampling or small production. once you know your claim is a producer buy a big one from Steve over at K&M. i was thinking a parts list would be helpful , also a video on a roller mill, they have those grain mills the home brewers use that would be awesome of course one would have to beef it up a tad. anywho keep up the great work, love your videos.
@FlashInYourPan
@FlashInYourPan 7 лет назад
Great video Jeff, with great advice as always.. Be careful of Slim, he might get you one of these days hahahaha
@charlesboston1
@charlesboston1 7 лет назад
i build a crushed similar to this but bigger , the drum is 18" in dia and 20" deep , powered by a 15 hp gas motor .... the issue i have is small bits of steel wearing off and getting into the ore . i used grade 70 transport chain as hammers ........ i'm thinking of maybe using grade 120 lifting chain ... any thoughts on this , and is there a way to share photo's of it here ?
@Free_Aussie
@Free_Aussie 3 года назад
Hi Jeff, What rpm is recommended the impact crusher and what is the recommended hp of the electric motor
@idhou6835
@idhou6835 5 лет назад
Tha nk you very much haw to the quantite in day
@firstmaje2271
@firstmaje2271 5 лет назад
6:32 So is the gold dust heavy enough that it does not blow out the vent in the bucket?
@troystutsman1400
@troystutsman1400 7 лет назад
What an awesome ring Jeff and Slim...! What do I have to do to win one when/if you guys decide to give another one away...? Ps... Thanks for the info on mills...! All I know about them is what you've taught Jeff. I would like to learn more about each type like; what's it used for, how to set one up and use it properly, along with what are some recommended brands plus how to make one myself. I would also like to learn how to set up a complete system from starting with raw materials to the end product ready for separating out the gold, if there is any in your materials... Maybe ideas for future videos...?
@zindi1138
@zindi1138 7 лет назад
the ring was slims idea lol
@djteddybear131
@djteddybear131 7 лет назад
GREAT SHOW JEFF THATS A 95....
@debiesu
@debiesu 7 лет назад
Please show us the hammer mill in use some time.
@Askjeffwilliams
@Askjeffwilliams 7 лет назад
you betcha.
@DonaldHarrington-vl7zq
@DonaldHarrington-vl7zq 3 месяца назад
How hard is it to drill holes in large blocks to fracture them using feather sheets to make smaller pieces to crush and extract gold from? I know the electric mikuni industrial compact drills can chew through granite but still it's never that easy
@patrickjobling8676
@patrickjobling8676 5 лет назад
Very good yes .. mr jeff .. and i gotta tell ya there plenty crazyness goin on out there .. mostly around me ..but ya get that ..😁
@chriscory8231
@chriscory8231 7 лет назад
Jeff hi ya doing big patron here my name is Chris Cory do you have a video on how to make a suction dredge nozzle an how it works. also how to hook it up to a trash pump
@johndeereutah9057
@johndeereutah9057 7 лет назад
Jeff, are you going to be at the Vegas show in April?
@rudyandrian1553
@rudyandrian1553 7 лет назад
HEY THERE, JEFF&SLIM !!! THANX FOR CALLING OUT MY NAME !!! Yo, "ADRIANnnn" !!!
@TheKrippler
@TheKrippler 9 дней назад
Jeff is it possible any gold can get out on the exhaust port on the bucket? Thank you.
@Askjeffwilliams
@Askjeffwilliams 8 дней назад
no
@gerard8496
@gerard8496 2 года назад
ok,for us that dont have, where can we get a finished product `?
@Askjeffwilliams
@Askjeffwilliams 2 года назад
from this site ...tell Steve we sent you to get a Great Deal makeyourowngoldbars.com/collections/k-m-krushers
@garyzobian7291
@garyzobian7291 7 лет назад
THANKS FOR ANOTHER GREAT VIDEO , OK GOING ON 2 MONTHS AND NO SHOUTOUT COME LETS GOOOOOO.
@aloberdorf4579
@aloberdorf4579 7 лет назад
Can you say LOVEJOY Jeff ? Slim knows........... (also the 'shadow knows )............................
@travisjochimsen9863
@travisjochimsen9863 2 года назад
Slim needs more beeeaanns!!!
@vahagnmelikyan2906
@vahagnmelikyan2906 Год назад
I should've bought small size. Because the output size is the same as the small size , so it can crush no more than the small size crusher.
@indybaitshop
@indybaitshop 7 лет назад
love your youtubes wheres my shout out lol
@pearlvineinternational5769
@pearlvineinternational5769 4 года назад
I like
@buddytucker8182
@buddytucker8182 7 лет назад
Hey Jeff , my biggest problem is most creeks around here are sandy and hard to get to, HELP Buddy
@Blackwood_gold
@Blackwood_gold 4 года назад
What size screen do you run?
@Askjeffwilliams
@Askjeffwilliams 4 года назад
1/16 inch
@me5768
@me5768 4 года назад
Hey Jeff I want to build a chain mill or hammer mill haven't decided yet but I was wondering how you attached your chain to the shaft is that separate from the shaft or is it wielded to it. I've already built a jaw crusher with a screening plant attached to it so I can feed 1/4" minus to the hammer mill with the over size to go back thru the crusher. Any help you could give me would be appreciated thanks ME
@Askjeffwilliams
@Askjeffwilliams 4 года назад
we welded it to the shaft
@donovanxxxx2660
@donovanxxxx2660 7 лет назад
Hi Jeff, A question - what's the approximate size of the gap between the loose end of the chain/hammers and the chamber wall? Think your videos are great btw Thanks
@Askjeffwilliams
@Askjeffwilliams 7 лет назад
good question... we try to keep it as close as possible about 1/4 inch but no more then 1/2 inch.
@66windar
@66windar 6 лет назад
Known as clearance, between impeller and casing wall in centrifugal pump terminology.In this case its the flailing chains
@TheSKINNMAN
@TheSKINNMAN 7 лет назад
Where's ol Slim
@MOTOMINING
@MOTOMINING 2 года назад
I want to build one of these soon, I'm thinking belt drive though to deal with the vibration, or would it just stall out?
@Askjeffwilliams
@Askjeffwilliams 2 года назад
you can use V belt and it will work ....direct drive with a love joy is better for the solid impact
@MOTOMINING
@MOTOMINING 2 года назад
@@Askjeffwilliams I was just thinking about the longevity of the motor, but also thinking about gearing it down for more torque.. Maybe I've got it wrong...Just seems like 1750 RPM is a lot for un balanced flails!
Далее
100 million nasib qilsin
00:18
Просмотров 514 тыс.
😍😂❤️ #shorts
00:12
Просмотров 792 тыс.
Mini Rock Crusher
7:55
Просмотров 148 тыс.
How to break rock the easy way
10:05
Просмотров 3,6 млн
DIY Mini Rock Crusher (No Welding!)
31:03
Просмотров 55 тыс.
Jaw Rock Crusher - BUILD Ep.6 - IT'S FINISHED!
20:27
Просмотров 1,3 млн
Сосед а твоя жена.,..
0:33
Просмотров 6 млн