This is how I made my favorite Nerf gun painfully strong and fully automatic to boot. I always wanted a good Halo Nerf Blaster, so when Nerf released the MA40 last year I upgraded it to be everything I wanted it to be.
The concept is pretty simple: use motors to shoot the darts and a solenoid to push them in. Then, use an Arduino to control both the motors and the solenoid. I cycle the solenoid 10 times per second. That's as close to the max you can get with my setup, considering the speed the return spring can be ready for the next dart.
The solenoid also makes a very heavy impact every time you activate it. It feels great to use as you feel the whole Nerf blaster jolt in your hands. You can even see me run it without any darts in just because of this at the end.
This channel is going to be oriented towards fleshing out my projects and ideas. Most will probably revolve around some electronics work, but it wont be exclusive. This wont be a Nerf channel, I just like to work on Nerf blasters. I'm really excited to make more things.
Project Overview/Schematic/Code: github.com/Sha...
Motors: outofdarts.com...
Motor Cage: www.thingivers...
Solenoid: www.amazon.com...
Solenoid to Pusher Link: www.thingivers...
(all these links are non-affiliated)
Amazing Music by: bknapp.bandcam...
/ chillindude-diss-instr...
/ brinstar-depths
/ zain-vs-mango
/ select-screen-zelda
28 авг 2024
