Monarch 10ee lathe and the fake machinists syndrome 

I used the Monarch ee lathes before they became popular. The PM forum is fine for many things however it is filled with bullies and the racist owner of that mess threatened me and my family so f*ck them with a stick in the ass. That aside thanks for tuning in!

I find the conduct of the US forum owners over the last 20yrs outrageous promoting their dork friends and using their loser moderators to chase smarter people off.

​@@deedeeindustrialsuperprecision we need a new website that doesn't come from 1996 and isn't controlled by the same old pretenders who just want to collect machines, they don't care about running or learning about them. I'm very thankful to have found your channel. Most people can't even run this machine

@@jameszaccardo1520 I think the web sites are dead meat harboring the fakes and keyboard bullies, the best will come from videos if this situation I have made You Tube aware of gets cleaned up.

The 8"4 jaw and 6"3 jaw are standard

Hi, thanks!

Local fellow here solved what lathe is better problem by having both. The electrical complications of the machine are actually easier to fix if you can run or observe one that is working properly, I am trying to show that when I can and will continue to do so and talk about it. I have many hours on the HC model that I used to bullet nose valve guides, cut and shape hard alloy valve seats of all types, and most other upper cylinder head parts for Harley Davidson engines. What I found is positive rake inserts and straight screw machine oil most of the time I could cut the hardest alloys including titanium up to the size of a 5c collet capacity it is after that I found the Monarch takes over up to the capacity of their 3" steady rest using negative rake inserts and not as much coolant use except for hard titanium due to more power and weight. Both machines are outstanding and come from separate directions in design. There are hoarders of these machines that pick them up cheap with one foot in the grave, more will come up for sale, thanks!

This group through a crooked Texas cop that happened to be a moderator on the "big forum" owned by a dumpster of a man in SC threatened me and intimidated my wife. They are all connected, call themselves "The hobby Community" here also. They are simply keyboard bullies, but a few show their stupid mugs here.

@@deedeeindustrialsuperprecision Wow, that is freaking crazy. I can’t even imagine what is wrong with people to behave that way.

@@deedeeindustrialsuperprecision I wish I understood who all these people are, but maybe ignorance is my bliss.

@@MyLilMule This group seems to actually despise the Monarch company, their disease comes from one machinist forum and the dumpy slob owner and personal trolls.

@@deedeeindustrialsuperprecision I am still clueless. Maybe that's right were I need to be. :)

Thanks, check out the craftsmen with small channels from UK, Australia and other channels not connected to the Jerk offs from the US cabal run by fakes.

The problem should not have happened, the Monarch company is still in the lathe business, and the likes of short pants is an insult to this American company passing himself off as an expert at restoring machines while recommending services from his cronies and trashing the drive system. He is just asking for it, and he is going to get it.

The fakes are troublesome in this world, when they become a pack of racist bullies causing harm and making threats, I will step up and not wimp out just watch what comes next.

He’s expressing his views. Nowadays, disagreement seems to imply hatred. No, it’s just disagreement

Thanks, will do!

You are so welcome!

There are very stupid individuals on the web forums and here that trash these machines and bad mouth the Monarch company and jerking off while doing it. I am familiar with the B&S Model O omniversal milling machine and the Knight miller or jig bore with tilting table.

I would think there is still a lot of work in that field, thanks

We have remnants of the old unions that is much the same, I have been totally independent by going into business. The fake channels here try to portray that as something of importance. The difference here is work for established system and you may get a gold watch after 25yrs, go out on your own and end up with a machine shop in the end. Thanks for tuning in!

I have never asked anyone to subscribe or watch this channel, but I am not afraid to point out a pack of bullies that worship a machine tool dealer that profits and that chases people off like the one commenting here that just wants to fix and sell machine tools. If you are part of that, get lost!

@@deedeeindustrialsuperprecision Since I have no idea who this group is or who you are talking about, I guess I'm not part of that group. I don't put up or associate with bullies.

There are many seemingly odd things people do with machines in working shops, I am trying to remember perhaps safer practices from time spent at the local CC. I am more focused on metal removal, thanks!

The machines are made for close tolerances, just not good for most work. The Axelson here is made to move metal, thanks!

Right on, thanks!

The guys in UK and Australia are much more active but are even more pushed out of views by these You Tube manipulators or view hogs here in the US.

I will continue to expose these frauds even though been intimidated by a wimp of a Texas cop and a Canadian lawyer warned me not to stir things up here on You Tube, so its an international incident compounded by others overseas calling out these clowns, stay tuned!

Spot on. Those are two intelligent people who aren’t trying to constantly over compensate and actually teach you something. Along with Mr Dee Dee of course! Robin Renzetti is another one that stands out.

Adam D. is just on another level.

Yes, he is a jerk off connected to the racist owned old woodworking machine forum, a complete POS, never a machinist.

@@deedeeindustrialsuperprecision Which one?

Yes, the machine is built for that, the ease of use reduces fatigue, usually making one off close tolerance parts most often for fixtures and tools

I dont think you get what I am saying at all dude

I think so too, the tube drives will not take a lot of overloading but are more refined in operation and smooth running at top speeds..

That guy restores things very nicely, the ones I am talking about are the embarrassing hacks rooted in the machinist forums and barfed out here on YT.

They actually threatened a Harley Davidson Factory Certified tech "Me"!

@@deedeeindustrialsuperprecision My Mato is believe nothing you hear, and only half of what you see. And you will be ok.

and always an ace, thanks!

It is on! Thanks!

The owner of one forum and his pet troll, makes them all stink.

I have said the VFD is the only logical alternative for the 10ee, even the factory admits the VFD does not have the performance the vacuum tube DC drive has. Your pie in sky praise for modern technology in this particular circumstance is as worthless as your opinion, You have Zero experience and it shows, try butterfly collecting or pissing up ropes.

" There's no reason to think that the best way to do things in the 1960s will necessarily always be the best way -" Conversely, you shouldn't assume that they're not... Monarch is using VFD's because they don't have a choice. In this case, sorry, the tubes really are optimal, they are simply no longer made otherwise you better believe that Monarch would still be using them. Super simple proof, the original tube based drives used a 5 HP DC motor. With the modern VFD setup, I think a 10 HP motor is recommended IF you use the back gear box, 15 HP if you go direct drive. This is because the torque curve of the tube drive was MUCH flatter than a VFD who's torque falls off at lower/higher speeds. Also, Monarch chose the much more expensive option of using DC originally to minimize the amount of mechanical noise that gets transmitted thru the spindle and into your work. Same reason the feed drivetrain is belt fed, not gear fed to provide mechanical isolation to the spindle. AC drives the spindle in 'bumps' which can be seen in the finish of the work due to the high precision and the 10EE's offer in the hands of a real machinist like Dee is correctly pointing out here. The modern DC replacement drives I've seen have all fallen short of matching the original as well. My 10EE had a $50,000 conversion to an Allen Bradley 1395 DC drive installed and it was awful, lacked both power and speed, topping out about 3200 RPM. I never heard much good about the Beal, Beel?? drive that made the rounds on the Monarch Forums. The best alternative to the original drive is to use a modern AC servo motor and drive. They have excellent torque curves and because the drive knows the exact position of the rotor within the magnetic field that the drive is controlling, as well as the load on the motor, they apply the right 'amount' of power the motor needs a that instant making them run very smooth. Most modern CNC machines use AC servo motors so the impulse noise issues are manageable and outperform DC drives in other ways. That said, if you have the original drive, do it takes to get it repaired. The only time I'd consider using anything but the original is if the original drive was already changed when you get the machine.

Thanks stay tuned!

Sure there is , Short Pants, Numb Nuts and Jerk offs 1 and 2 just for starters!

I will drink to that old timer! If they would let me these days...

@@deedeeindustrialsuperprecision I will have one then !

@@swanvalleymachineshop I am awaiting a threat from short pants Canadian lawyer buddy, then I show him the door with his unfortunate close association with an out and out racist wood working machine web site owner, who by the way is smarter and does not have a channel here.

I must be out of the loop. Is Thermite a youtuber?

@@Ed-zh5cg his master is known as DT or stink finger Don T a despicable racist puke from SC that runs the cult of fakes,

I warned the actual big cheeze of this circle jerk racist bully operation after his personal trolls made threats toward my wife I would do exactly this more than a year ago, and now will turn those unforgiving stub acme screws and squeeze them out of here.

Their real problem was intimidating my wife, one could get planted like an onion that way, read the comments and I do enjoy the thumbs downs.

are You sure Keith isnt Mr shortpants? He does wearshortpants and is redesigning a 10ee drive. trying to figure out the others now

@@danneumann3274 I was wondering the same thing, but I've met Rucker and corresponded with him on a few things, I can't see him "intimidating" someone's wife. Not that I would know in any case. I think I know a couple of the other guys he mentioned (one is Steve W) and the other MIGHT be this new channel that has gone from 0 to 200k subscribers in only a year - something is fishy with that one, if you ask me.

@@MyLilMule these guys may not be good for 10ee but Keith does bring back some very old machines from near death and Steve does have that big old planer. Dee Dee operates at a very high level on these monarchs and spots things on these other channels that I wouldn't.

@@danneumann3274 Well, yeah, any expert can spot a fake a mile away. There are things I have expertise in (not machining related) and when I see them being portrayed on TV or the like, I can spot a fake easy. But I also don't get offended and call them stupid.

@@KennyEaton603 The idea that you cannot redesign the drive on a 10ee is rubbish. Those lathes, by and large, are antiquated technology as far as the electronics are concerned. That is inescapable fact. It’s a DC drive. The technology is well understood and easily replicated, and likely just as easily improved. YOU have NO clue of what you speak. The only simple thing about your words is your brain. Simple.

Thank you Mr. blowhard Butt hole with zero content in your channel on a creative platform now talking to a certified professional in those trades you know nothing about. Shower grifter Short Pants with free sh*t, but he is a fake that is an international embarrassment along with the despicable racist and Monarch lathe hater Stink Finger DT and his Troll Termite. Thanks for tuning in!

@@deedeeindustrialsuperprecision Thanks for the response, good luck to you.

That clown is only the Friedly face of the fake cabal in it for what they can get, the big cheese is in SC a little dumpster of a man that sicked his dogs on me and my wife, now I squeeze them, and that is what brought me here. The side benefit is knowing good folks like you and I will keep making videos, I informed YT exactly what has been going on here with this bunch of racist scum on You Tube gaming the system and I intend to clean it up. My very first video I said some are going to be very unhappy about me being on YT, I was very pissed off right then in not a good way. Thanks Blade!

@@deedeeindustrialsuperprecision The Universe is vast and our lives are short. Now that I am old and in decline I realize the importance of finding and sharing joy whenever possible. Don’t charge windmills at the expense of sharing joyfully, what you have learned/ discovered during your life. Your spirit is strong don’t let the perversion of short pants and his cronies be your focus. It will distract less aware people from the gifts you are giving to those of us who care. Much Love and Light, TB

You have shown nothing on your channel with all your experience Martin, are you a racist bully like the owner of the PM forum? Are you going to threaten me and my family?

@@KennyEaton603 You are an idiot. I pour babbitt and I know how to do it. Fuck off moron. You're one of the fanboys DD is laughing at.

Kenny, you have done nothing in your miserable wasted life, no content in your channel to proves it.

@@KennyEaton603 You are nothing more than a digital fart with zero content, do you realize that Mr. Babbitt Eienstein?

@@KennyEaton603 You are the one coming on this channel calling another viewer a liar, you sir are an internet bully trying to look out for your creepy racist fake machinist friends. But you Mildew, can not bully me.

@@deedeeindustrialsuperprecision HAHAH Good one Dee Dee