Тёмный

Most Common DIYer Electrical Mistake When Cutting Cable Sheathing - 5 Tips To Do It Right! HOW TO 

Fix This House
Подписаться 517 тыс.
Просмотров 43 тыс.
50% 1

ITEMS I USED ON THIS VIDEO:
- ROMEX Non-Metallic Cable Stripper - amzn.to/3wO19Ac
- ROMEX Cable Ripper - amzn.to/3wWjJqY
- Voltage Tester - amzn.to/3GJIESd
- Box Utility Knife - amzn.to/3wUGyua
CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
On this episode I'm going to show you the most common DIYer electrical mistake when cutting cable sheathing. I'll show you 5 Tips and Tricks to do it Right! This is a great How To for Beginners!
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DISCLAIMER:
This video is meant for informational, educational, and entertainment purposes only! To better your knowledge on the concepts of electricity, electrical circuitry, entertainment component circuitry and all other wiring methods. Electrical codes in my area may be different from yours so always make sure you follow and stay current with your local code. With different codes around the world constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Fix This House cannot claim liability with all applicable laws, rules, codes and regulation for a project. DO NOT ATTEMPT ANY WIRING OF ANY KIND if you lack the knowledge and understanding required. Otherwise, personal injury and/or death as well as property damage or loss could occur. Your safety is your own responsibility, including proper use of equipment and safety gear, and determining whether you have adequate skill and experience. If you are a younger person or are inexperienced with electrical devices, ask for help from a parent, teacher or a licensed professional.
WARNING- Electricity is dangerous and can cause personal injury or DEATH as well as other property loss or damage if not used or constructed properly. If you have any doubts whatsoever about performing do-it-yourself electrical work, PLEASE do the smart thing and hire a qualified and licensed electrician to perform the work for you.NEVER WORK WITH LIVE VOLTAGE. Always disconnect the power source before working with electrical circuits.When performing electrical work, ALWAYS READ AND FOLLOW THE MANUFACTURERS INSTRUCTIONS AND SAFETY GUIDELINES. Always follow your local electrical code and requirements which are specific to local areas.By utilizing this video and the information given, YOU are expressly holding "FIX THIS HOUSE" HARMLESS FOR ANY PROPERTY DAMAGE, PERSONAL INJURY AND/OR DEATH, OR ANY OTHER LOSS OR DAMAGE THAT MAY RESULT FROM YOUR ACTIONS. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Fix This House cannot be held liable if they cause any damage to their homes. Fix This House and all parties associated with it ARE NOT responsible for the use and results of this information by any party, especially those lacking sufficient skill or knowledge to perform these steps safely and ANY HAZARD CREATED IS THE SOLE RESPONSIBILITY OF THE USER.
DISCLAIMER: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#Romexwire #electricalwire #wiringDIY

Хобби

Опубликовано:

 

5 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@lamar9525
@lamar9525 2 года назад
Thank you, I like that Southwire Strippers.
@FixThisHouse
@FixThisHouse 2 года назад
Thank you so much for watching! Yes that southwire stripper is an amazing super fast tool! 👍🏽😊
@jefffuhr2393
@jefffuhr2393 2 года назад
My junior high school electrical shop teacher, Mr. Dever, used his *THUMBNAILS* to strip the sheathing/insulation off just about anything--including Romex. He made sure that you saw him doing it too. Needless to say, no one in his class misbehaved much.
@vichalen294
@vichalen294 Год назад
Vic Halen 0 seconds ago Thanks for all the work you send my way. I get about 20-30% of my work as a state certified electrical contractor following behind "electricians", trunk slammers and DIY'rs who tried ONLY because someone like you on the internet gave them the confidence. Keep up the good work.
@tractorfreak1
@tractorfreak1 4 месяца назад
5:24 these holes labeled 6/32 and 8/32 are for cutting screws . These sizes are the most common screw sizes in electrical boxes , outlets , you screw the screw in to the length you need and you can cut it, as you unscrew it out it will repair the threads .
@ramschannelreviews
@ramschannelreviews 7 месяцев назад
Thanks for the video. The Southwire Romex stripper looked neat but I think it can still nick the wire's insulation without you knowing. Maybe just needed more practice. I liked the first method though, perfect for my Milwaukee utility knives.
@outlet6989
@outlet6989 2 года назад
Wire cable usually has a flat side and a grooved side. I always cut on the grooved side. Never seen that outer covering removal too. "Oh, Dear, I need to make another trip to Home Depot." Considerations for the DIYers: Any DIY project requires Time, Effort, and Money. Since you will save money on labor costs, spend some of that money to buy the tools you'll need. Specialized tools will pay for themselves in a short time and save you time and effort.
@FixThisHouse
@FixThisHouse 2 года назад
Thank you for sharing and your input! 👍🏽😊
@Deep_Divers
@Deep_Divers 8 месяцев назад
Good tips!
@howtodoitdude1662
@howtodoitdude1662 2 года назад
Another method is to grab the ground wire with your linesman plyers and pull it away from the two insulated wires. That ground wire will slice through the sheathing easily.
@FixThisHouse
@FixThisHouse 2 года назад
Thank you for sharing your technique! 🙏🏽😊
@ricks1611
@ricks1611 2 года назад
The holes in the Southwire stripper are not for cutting wires but to cut screws that you can thread in and not wreck the threads There is printing by them that says size 6-32 and size 8-32 sizes.
@FixThisHouse
@FixThisHouse 2 года назад
That is true 👍🏽😊 but I use it to cut wire as well 😂
@1975enoc
@1975enoc 2 года назад
Why would you use the holes for cutting wires when the tools has a cutter. That’s just dumb. Fix this house that’s beyond bad advice
@nativeghost
@nativeghost 2 года назад
I have a question for you on wago uses. Is it ok to use them for ceiling fan installs.
@FixThisHouse
@FixThisHouse 2 года назад
I don’t see why you couldn’t. They are wire connectors 👍🏽😊
@robertgeary7520
@robertgeary7520 2 года назад
Great video thanks
@FixThisHouse
@FixThisHouse 2 года назад
Thank you so much! 🙏🏽😊
@ukaonuoha774
@ukaonuoha774 Год назад
Hey! Really helpful video. I'm running romex between 2 outlets on opposite sides of the same wall, so i'm just dealing with drywall. My question is, how much of the romex should be in the wall i.e. between the outlets? Should it be taut or should there be some excess romex in the wall so that there's some slack there? This might be a basic question. If so, forgive me, I'm a novice :D
@danporath8258
@danporath8258 4 месяца назад
I like leaving 6 inches slack behind wall. Next guy has extra. Congrats on your remodel.
@itaintrocketscience
@itaintrocketscience 2 года назад
Electrician here.. Every electrician I know uses a razor knife, myself included. ( maybe the younger generations uses something else) Use a brand new blade and just graze the sheathing... Very simple, actually
@FixThisHouse
@FixThisHouse 2 года назад
Thank you for sharing your knowledge and expertise! 🙏🏽😊
@chezchezchezchez
@chezchezchezchez Год назад
And, it’s not rocket science
@dovidhousman1109
@dovidhousman1109 2 месяца назад
There are romex strippers. Just like regular strippers but only for 14 and 12. The remaining space has spaces for cutting the sheathing of 12/2 and 14/2. I like them but they leave an inch or so in plastic boxes.
@brettmullins751
@brettmullins751 2 года назад
Klein wire stripper is what I like
@FixThisHouse
@FixThisHouse 2 года назад
Nice! That works too! Thank you for sharing 🙏🏽😊
@brettmullins751
@brettmullins751 2 года назад
@@FixThisHouse i enjoy your videos for educational purposes but I like that you are doing something to improve the quality of life for the people who watch the video
@mernok2001
@mernok2001 2 года назад
A utility knife should never be used for any electrical work.there are knives sepecifically made for wire stripping,last longer and have an affordable price.
@jerseyjim9092
@jerseyjim9092 2 года назад
I have a cylinder type device that hooks under the upper part of the sheathing. You then push it up. It works well. Uing a razor knife is a very common method, even by electricians. I have at times cut into a conductor so I avoid using a knife and if I do use it I just score the sheathing.
@FixThisHouse
@FixThisHouse 2 года назад
Nice! Thank you for sharing that technique! 🙏🏽😊
@joeweatlu5169
@joeweatlu5169 2 года назад
I use a similar tool. The end opposite the blade is designed to slip over a wire nut, making it easier to grab and twist it.
@jerseyjim9092
@jerseyjim9092 2 года назад
@@joeweatlu5169 Might be the same one. Its made by Ideal and called the lil ripper. I bought it as an alternative to the metal clamshell type which as stated in the video can sometimes nick the conductors. Its touted as a multiuse tool but Ive found it useful only for slitting the sheathing and torguing wirenuts.
@timskaggs9960
@timskaggs9960 6 месяцев назад
The problem with the last one is if you have several wires you can't get drop enough in the box
@patrickr3952
@patrickr3952 2 года назад
#1 is my way...
@FixThisHouse
@FixThisHouse 2 года назад
Nice! Thank you for sharing! 🙏🏽😊
@michaelosmon
@michaelosmon 2 года назад
You can't even use romex where I live. Tip #1 - use conduit instead
@FixThisHouse
@FixThisHouse 2 года назад
Thank you for sharing! 🙏🏽😊
@wellsnapyeah
@wellsnapyeah 2 года назад
Where do you live?
@sparky8910
@sparky8910 2 месяца назад
Great, another amateur trying to show how little experience can be dangerous.
@marywittig1505
@marywittig1505 2 года назад
Are you even an electrician. What do the numbers 8/32 and 6/32 mean to you??? Those openings on the stripper are not to cut wire...
@FixThisHouse
@FixThisHouse 2 года назад
Bolt shears, but why limit yourself to just bolts?
@marywittig1505
@marywittig1505 2 года назад
@@FixThisHouse Because they're threaded to 832 and 632 and you'll ruin the threads to cut bolts
@zinsco
@zinsco 2 года назад
No way you ruin the threads cutting wire in those holes. Copper wire is so much softer than a 6/32 or 8/32. I never have nor ever would use those holes to cut anything other than a 6/32 or 8/32, but to say that you will damage the threads cutting wire is ridiculous
@marywittig1505
@marywittig1505 2 года назад
@@zinsco If hes giving them the opportunity to utilize it for something other than that what would stop them from utilizing it for something that would destroy the thread...ijs. I myself would prefer to use it for what it's intended use don't destroy your tools
Далее
Should Romex Be Stapled Neatly? DOES IT MATTER??
8:12
Просмотров 145 тыс.
How to Strip Romex Wire | 4 Different Ways
8:01
Просмотров 44 тыс.
6 MISTAKES DIYers Make When Wiring Outlets
11:28
Просмотров 2,2 млн
How To Repair Damaged Romex Wires
9:47
Просмотров 956 тыс.
5 Mistakes DIYers make using metal electrical boxes
7:20
Slow Mo Spiral
0:11
Просмотров 23 млн