At 09:58 you say, if you take off the extra shell, it will fit in, but you can not tighten it. I think you missed, that you can tighten it using the screw under the black end cap. Tighten this screw will "spread" the slotted shaft of the adapter, until it sits tight in your handle bar. It does not matter if you use the optional adapter shell or not. The shaft and the shell will spread, thats why they are slotted.
What screws did you put back in for your reservoirs? They weren't the same ones that came out and the right side one is reverse thread so not so easy to find. Any hints as to what you put in there would be greatly appreciated!
I have a 2007 gsxr 600. Bought these same mirrors, bar ends and all.. I opened up my bar ends and they are just long screws, no brass parts, they just screw in. I can’t get the bar end to mount flush. Any ideas?
3 videos on these mirrors and still no install on the hyper. I guess that leaves room to make a 4th, 10 minute video 😂😂 It's all good, I'll figure out if I need extra hardware or spacers when I pull the guard off.
The install starts at 6:41. I laid out time stamps in the description. The intention is to give information not mislead. Thank you for watching and welcome to the channel.
Nice videos. I have a question about the adapter. Does it fit the threaded handlebar? I am thinking of purchasing these but not sure it works on threaded handle bar. Btw my bike is yamaha fz 07
For direct mounting on OEM bar end weights. Do you have the max diameter of the inner clamp of the mirror? Basically how wide a bar end weight can it mount on? And also if you could give an estimate to how low a diameter bar end weight it can mount and tighten down on?
can someone tell me if these are too small? is field of view ok? I'm not sure if go for the blades or the page version. I'm afraid the page will be too big
Both are great option. Which bike do you own? I specially went with that style because it fits the StreetFighter lines. The field of view is irks perfect for me. MotovationUSA.com/cfny
Take a look at the Rizoma Cut Edge mirrors. They are a universal mirror and come with adapters to install 3 different ways. Take a look at our video "Rizoma Cut Edge Mirrors - Unbox and Install." They are brand new from Rizoma.
Hello, I am the manufacturer of LED headlights and like your video. I really want to have an cooperation with you. I have sent you the message via Instagram. Looking forward to your reply.
@@ClutchFirst Thanks for the response, I know the bolts were Metric 8x1.25, however it went on fine for the left side (clockwise to install) but I think the right side is actually a different thread pitch as it’s not going in (counterclockwise)
Are those plugs in your bar end weighted. They should be to cut down on handlebar vibration. I have these mirrors but not fitted yet as they don't work with my weighted Rino bar ends
What size screws did you put back in your reservoirs? Dimensions? I know one has to be a right thread and the other has to be a left thread, but can you tell me where you ordered them?
Hey Mike, greetings from over the pond. Just bought some Motogadget bar end mirrors for my Low Rider S and after reading the instructions, I really wasn't sure how to install them. After watching your video, you've made it all perfectly clear, even down to modifying the spacer if I need to. Brilliant! Thank you so much.
Been searching for bar end mirrors for my zh2 for a wile think these are the ones 😁 great review they look awesome thanks Mike greetings from the Uk 🇬🇧👍🏻
I’m using the GoPro Handlebar Pole Mount. It will run you about $30+. You can mount the mirrors on a bar end plug but it will have an unfinished look. Meaning, you can’t use the provided end caps. But, it’s definitely doable. Thank you for watching. Subscribe to help the channel grow. 🙂🙌🏽
You can actually fit the CRG and MotoGadget mirror less mirrors on the StreetFighter. We actually have a few videos on the channel showing both on. Also you can always install one of my favs, Rizoma Spy R. All links are in the description.
You can actually fit the CRG and MotoGadget mirror less mirrors on the StreetFighter. We actually have a few videos on the channel showing both on. Also you can always install one of my favs, Rizoma Spy R. All links are in the description.
Yeah man, that shirt is one of my favorite. It’s Kyle Wyman’s pit crew shirt. You should be able to purchase one on his official site or hit him up on IG to grab one for yourself. Thank you for watching and welcome to the channel.