MOTOGADGET M.BLAZE DISC LED BAR END TURN SIGNALS: Installation on Royal Enfield Continental GT 650 

Thank you for this video!!! Great detail to help me better understand how these little gadgets work :)

OHHHhhhhh man I really wanna do this to my GT but I don't trust myself yet with drilling holes and DEFINITELY not with electronics. Think this is definitely what I'll do to clean up the front end.. as far as indicators go. Thank you for the video, I'll reference it later for sure.

Those are nice. They look great. I'd put some kind of cap or bolt in the hole where the old blinker was attached, to cover it.

Here I was thinking I could install these while drinking a 40 late at night. Nah, there seems to be more too it. Great video!

Those look much better. Good install video Joy!

Lookin more and more cool with each mod. Nice job.

I love those! That bike looks really good

I want to add these to my bike too. They look awesome. Im curious whether you can have these and the stock turn signals simultaneously?

Hey! Did you need any special parts from motogadget to mount the mirror and blaze together at the bar end? I am gonna do the same setup but wanted to make sure! Thanks!

Great looking functional upgrade. Looks way cleaner. ✌😎

Wow they work well ....how cool are they thumbs up on both the look and the install ....great stuff guys thumbs up form me here

Very nice video. Keep up the good work sister.

Awesome!!!! Thanks guys. Installed on a Gsxr 1000.

Here in the UK you can also remove the rear indicators as the bar end indicators can be seen from front and rear ;)

That really looks much better than the stock indicators.

The bars are swaged down on the right side insert making it hard to get out, that's on an Interceptor anyway. Not sure about the Throttle side but that's a good tip about the hole in the bar under the Throttle tube.

I installed these on my Ninja H2 and they are GREAT!

Good video. Thanks for the info. Im thinking about doing this to my GT650. Now that its been a while since you did the upgrade how do you like them? How have they held up?

Hi are the bar end pins or alankey grub screws if pins do they just pull out with long nose pliers thanks percy in uk

Nicely done!!!

That's pretty slick, looking good!

Looks good!

Those look awesome! The weights on the handle bars have been completely removed.Can you confirm that there are no differences in vibrations after you installed these?

Looks slick! Great job! 👌

Great video! I’m looking to do the same on my interceptor. Can you tell me where on the wiring circuit would I put the flasher relay?

Hi ! Where did u get the mirrors from thanks

Thanks for sharing!

Good Job! Love your videos!

very good for safety , i from malaysia after this i one to install at my cupbike Modenas Kris 110cc

Those actually look pretty cool.

Looks super cool I’d love to have them in addition to front and rear indicators but wow that’s a project and a half haha

This look good, I was wandering if they look good on my cbr.. 🤔

Hi, i have got the 2024 year model and the latest led bar end lights from motogadget and the motogadget relay , the flasher relay comes with just a single red and then a black wire not sure how to use it any references ?

Dang that looks pretty cool!!

Love the video! Thanks

Where do I get the mirrors? Thank you

hows the handling without the barend weights ? i used solder connector for all parts on my gt650 . its just a transparent shrink tube with a solder core . so when you heat it up it shrinks and solders the inside .

Did you find it exceptionally difficult to fit the medium sized rubber spacer into the bar? I got my bars from Indian Aftermarket and I am starting to wonder if the bar is actually machined to have a 17mm opening. I can only get that rubber piece into the bar maybe a quarter of an inch before I start to feel like I am risking breaking the turn signal.

loox cool, great job

Hi there. RE comes with built-in flash relay. Does it flash like crazy after installing the motogadget? Do you have a video for installing that relay?

I have these on my street triple a point to note the anodizing on the black ones faded to bronze in the West Australian sun.

Good job awesomeness dear 👍👍👍👍👍🥰🥰🥰🥰

Wondering if you guys are going to do something for the rear indicators as well.

Wow that’s pretty neat.

How are thr bar-end lights long term? Want to know if they are worth it since they are very expensive.

AwWSuM video, O don't usually watch install video to be honest, but I really love the Blue coloured Enfield you have & the up grade was well worth it, so cool - yes Gettin rid of those yellow blinkers.... tidied up the look.. AwWSuM 😁✌🏻 Next😉 what about the yellow reflector on the forks?🤔✌🏻😁 Cheers 🍺🤙🏻

nice bike and nice mod. cheers

Why did you leave the rear indicators on the bike? The idea is that the bar end indicators replace the fronts and rears as they can be seen from either place.

Do these lights annoy you while looking in your mirror while turning?

i think you will need a flasher relay if you got the older m-blaze disc , the new ones have a resistor internaly for 330 khz . also you could have used the original indicator connectors . good job there , now you just need another headlamp bracket .

How are you? I am from Argentina, and I did the same job on my Continental. I took off the counterweights and now after 30km my hands go to sleep. How did you handle this situation? Happen to you? The video is very good! Greetings!

Does this affect vibration in the handlebars since those anti vibration weights are removed?

Too late now but you can cheaply get a wiring connector kit for under $20 and make it plug right into the existing harness.

Hi. What flasher unit did you change to?

What about handling and vibrations ? These must be a reason for royal enfield to add weight in handle bars.

Did you need to change the relay for LEDs ?

How's the steering vibration with the stock bar ends being replaced with the light?

Looks dope

Thanks 😉

Those are pretty cool and different. How do they look in the bright sunlight. 😎😎

clean

That is actually a big install, they really bright, and it really does compliment the bike nicely, now a question, they are totally legal right ?

Fyi… If you simply unscrew it, the inner bar weights will easily slide right out.

how mush is cost for 1pair?

These would look amazing on my Ebike. Would you consider making a video on how to install these on an electric bicycle?

Much cleaner

Dam she looks good

Looks cool but I wouldn’t spend money on something like that. $ so tight

You need some more jeans!

She looks like Ellen Degenerates 😂😂 DeGeneres* lol