Motorcycle Disassembly - Yamaha Virago 250 (XV250)

Подписаться 4,1 тыс.

Просмотров 42 тыс.

50% 1

Today I take apart the Virago 250. It took a while because I've never done something like this before. It was a lot of fun doing this. I even diagnosed the clutch and fixed the issue it was having. (I'll save that for another video)
Now that the xv250 is taken apart, I can start to restore each part and paint them up. Any parts that don't look worth the trouble, I'll replace as parts for this bike are really cheap. -Stealth
Join the Yamaha Virago 250 / V-Star 250 / XV250 Facebook Group:
/ xv250
Virago 250 /V-Star 250 (XV250) Aftermarket Parts list:
Slash cut exhaust pipes (Short shot style): s.click.aliexp...
Slash cut exhaust pipes (longer style): s.click.aliexp...
Carburetor s.click.aliexp...
Carbuerator Rebuild Kit: s.click.aliexp...
Carburetor Intake Manifold Boot: s.click.aliexp...
Intake Carburetor Carb Air Funnel: s.click.aliexp...
Fuel Pump: s.click.aliexp...
Fuel Petcock: s.click.aliexp...
CDI Ignition Box: s.click.aliexp...
Start Relay Solenoid : s.click.aliexp...
Starter Motor: s.click.aliexp...
48mm Air filter Pod: s.click.aliexp...
9mm Breather Filter: s.click.aliexp...
2-Pin Electronic LED Flasher Relay: s.click.aliexp...
Tracker Style Handlebars: amzn.to/3xrkFE7
Spark Plugs: amzn.to/3xtB37f
Ignition Coil/Rectifier: s.click.aliexp...
K&N Oil filter: amzn.to/3zlwGfA
LED Signals Bullet Blinker: s.click.aliexp...
OEM Style Signal Lights: s.click.aliexp...
10.5" Rear Shocks: amzn.to/399eKue
Front Brake Caliper: s.click.aliexp...
Front Brake Master Cylinder: s.click.aliexp...
Front and Rear Sprocket + Chain: s.click.aliexp...
17T Sprocket: s.click.aliexp...
Gas Tank Decal: s.click.aliexp...
Motorcycle Grips 22mm: s.click.aliexp...
Engine Guard Crash Bar Protector: s.click.aliexp...
Magneto stator 18 Coil: s.click.aliexp...
Fork Seals & Dust Cover: s.click.aliexp...
Front & Rear Cylinder/Piston & Head Gasket Kit : s.click.aliexp...
Pistons and Rings: s.click.aliexp...
Connecting Rods: s.click.aliexp...
Rocker Arm s.click.aliexp...
Cranksaft: s.click.aliexp...
Engine Oil Pump: s.click.aliexp...
Engine Gasket Set: s.click.aliexp...
Exhaust Valve: s.click.aliexp...
Motorcycle Mirrors 10mm: s.click.aliexp...
Mirror Brackets (M10-22MM): s.click.aliexp...
Backrest / Sissy bar: s.click.aliexp...
Backrest/ Sissybar and Rack: s.click.aliexp...
Aftermarket Rear Brake Light: s.click.aliexp...
Rear Tail Brake Light: s.click.aliexp...
Oil Filter : s.click.aliexp...
OEM Style Air Filter: s.click.aliexp...
Clutch Plates: s.click.aliexp...
Rear Drum Brake: s.click.aliexp...
Front Brake Pads: s.click.aliexp...
Front and Rear Brake Set: s.click.aliexp...
Rear Brake Line Cable: s.click.aliexp...
Steering Bearings: s.click.aliexp...
Throttle Cables: s.click.aliexp...
Ignition Start Switch/Fuel tank cover/Keys: s.click.aliexp...
Front & Rear Seat: s.click.aliexp...
Bobber Style Seat: s.click.aliexp...
Bobber Rear Fender: s.click.aliexp...
Gas Tank Decal Sticker: s.click.aliexp...
Virago Tank Emblem: s.click.aliexp...
OEM Style Footpegs: s.click.aliexp...
OEM Style Rear Springs (Stock Height) : s.click.aliexp...
Rear Springs 10.5": s.click.aliexp...
Left and Right Controls: s.click.aliexp...
Speedometer Cable: s.click.aliexp...

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@Gneeznow 8 месяцев назад

These bikes have fantastic engines, they are bulletproof (same engine in the Dragstar 250)

@ryandaly8085 7 месяцев назад

Dude I bought a 91 virago 250 off a guy who had stripped it right back, and now I'm rebuilding it and because of this video I can now figure out where all the little pieces go so big help my guy. Thankyou

@momentumgarage 2 года назад

Nicely done! Very thorough on the disassembly. I will have to use this for a reference because I'm putting mine back together now, and a lot of stuff on mine was missing/spliced together, unfortunately.

@thomasegan1551 2 года назад

Great job with the strip down and also the film work. I just bought one of these super little bikes. Subscribed 😃

@indigowy4665 2 года назад

Nice content,i Buy same bike and now have more knowlage how to repair,THX

@jeremyt9212 Месяц назад

Nice little bike I have one I ride to work periodically. Or when saving $$$$. Nice bike just very uncomfortable

@rubenloera9068 Год назад

El mejor video!! Ademas sin alto volumen de ruido musical!!

@georgekokkinakis1001 Год назад

What you have shown is quite informative at least to me who i must admit i am still learning. Disassembling the engine would be to i believe a lot of your viewers a request.Thanks.

@georgekokkinakis1001 Год назад

@@MotoGearSolid I wish you a Merry Christmas and a Healthy New year with more intuitive ideas as these undoubtedly help lots of your channel viewers understand a bike's mechanics much better.

@peterthomas7203 2 года назад

Good job! I have started painting mine up (you saw my engine on Facebook 😉) best of luck with yours, looking forward to see how you decide to customise it!

@HighAway 2 года назад

i wish i have a space and do stuff like you have, so i can work on my new used bike. and to say i'm glad you didn't wait for me to buy your bike 😂

@HighAway 2 года назад

@@MotoGearSolid thanks, what are you going to do with them???

@HighAway 2 года назад

alright man I know Ill be checking back!!

@46MOTO46 Год назад

Распетрушил здравый моцаль и улыбаецо)

@46MOTO46 Год назад

@@MotoGearSolid окау

@MikeF031 Год назад

Awesome. This was very helpful, thank you.

@paulopessoa4672 2 года назад

Thanks. It was very nice to watch.

@tokwa619 Год назад

thank you!

@blizatrex 2 года назад

It looks like you are going to have lots of places where you can modify and personalize your bike.

@KingShulian Год назад

EXCELLENT video!! Thanks

@loganrobinson1126 2 месяца назад

I’m doing a project with a 1988 xv250 engine. I’ve been getting all the parts to run it, but I can’t figure out where the start switch plugs in. I tried to use your video but I can’t see it well. Do you know where the ignition and kill switch plug into along with the starter solenoid? Any help would be appreciated. Thanks

@dvnnyred49 8 месяцев назад

My crank case is leaking on the bottom right where both halves meet and I need to know the easiest way to pull it so I can re seal it and throw it back in.

@aaarrrsss8936 9 месяцев назад

Virago super.

@SlipperyStubble 8 месяцев назад

don't pull on the wires man (at the beginning, watch how he pulls the rear indicator lights)

@Icanreadgood1 2 года назад

on my bike opposite side of the air filter, in the plastic pod I have a large second air filter system do you know anything about that and If it can be removed? I have a 2012 xv250.

@Icanreadgood1 2 года назад

@@MotoGearSolid yeah your right, I looked online for a video of removal but didn't find anything. Best I could find was a written guide with a couple photos, I'm not sure I'll try it yet. I'm keeping a close eye on your posts for inspiration for my bike! Thanks

@billcarson8848 Год назад

Great job sir, and thank you for no stupid music. Now I know a lot more about my 250 Virago. 😀😀😀😀

@HighAway Год назад

14:17 I have one a quite bit worse than yours. But when I had it taken apart and I looked inside it and it's all smooth. Does that consider still good?? Despite of appearance it doesn't affect the engine operation.

@PopesCustomLife 8 месяцев назад

How can I delete all the switches & neutral to start the engine raw. Having bad luck using the virago as a chopper engine.

@tokwa619 11 месяцев назад

can we replace the neutral switch easily? cannot seem to find where you removed it

@Acdzbrn 2 года назад

What's that's plastic piece that is between the cylinders that was all cracked ???? I just looked at mine 🤯

@alperengoren8944 Год назад

Do you have a video of how you remove/assemble the swing arm. Or can you tell me which parts I should get for swing arm assembly?

@alperengoren8944 Год назад

@@MotoGearSolid I havent found much things on the parts. Does it have an inner bearing between the arm and chasis vertically speaking.

@mladenlupsa2354 6 месяцев назад

Can one interchange parts between xv250 and dragstar xvs250 and up to what year Plus does anyone here know where to get the manual with torque specs

@rofizzleful 2 года назад

Hey man, I have the same bike and need a new front brake rotor. I've looked around and can't find any, got ideas where I can get one? Used is fine too

@rofizzleful 2 года назад

@@MotoGearSolid okay dope! Any specific brands or things I should be looking for?