Start To Finish: Custom Yamaha Virago 250 (XV250)

Подписаться 3,8 тыс.

Просмотров 71 тыс.

50% 1

I've finally completed my Custom virago 250!
This is the last video I'll post on it. It shows the progress from Start to finish. Enjoy- Stealth
For all the parts I've used.
Here's a Virago 250 /V-Star 250 (XV250) Aftermarket Parts list:
Slash cut exhaust pipes (Short shot style): s.click.aliexpress.com/e/_DBn...
Slash cut exhaust pipes (longer style): s.click.aliexpress.com/e/_DFx...
Carburetor s.click.aliexpress.com/e/_DeD...
Carbuerator Rebuild Kit: s.click.aliexpress.com/e/_DBN...
Carburetor Intake Manifold Boot: s.click.aliexpress.com/e/_DDh...
Intake Carburetor Carb Air Funnel: s.click.aliexpress.com/e/_DDh...
Fuel Pump: s.click.aliexpress.com/e/_DmD...
Fuel Petcock: s.click.aliexpress.com/e/_Ddw...
CDI Ignition Box: s.click.aliexpress.com/e/_Dde...
Start Relay Solenoid : s.click.aliexpress.com/e/_DFf...
Starter Motor: s.click.aliexpress.com/e/_Ddm...
48mm Air filter Pod: s.click.aliexpress.com/e/_DlK...
9mm Breather Filter: s.click.aliexpress.com/e/_Dkf...
2-Pin Electronic LED Flasher Relay: s.click.aliexpress.com/e/_Dmc...
Tracker Style Handlebars: amzn.to/3xrkFE7
Spark Plugs: amzn.to/3xtB37f
Ignition Coil/Rectifier: s.click.aliexpress.com/e/_Dlq...
K&N Oil filter: amzn.to/3zlwGfA
LED Signals Bullet Blinker: s.click.aliexpress.com/e/_Der...
OEM Style Signal Lights: s.click.aliexpress.com/e/_DcY...
10.5" Rear Shocks: amzn.to/399eKue
Front Brake Caliper: s.click.aliexpress.com/e/_Dn5...
Front Brake Master Cylinder: s.click.aliexpress.com/e/_DlS...
Front and Rear Sprocket + Chain: s.click.aliexpress.com/e/_Dki...
17T Sprocket: s.click.aliexpress.com/e/_Deb...
Clutches Plates: s.click.aliexpress.com/e/_DDr...
Gas Tank Decal: s.click.aliexpress.com/e/_DDA...
Motorcycle Grips 22mm: s.click.aliexpress.com/e/_DDU...
Engine Guard Crash Bar Protector: s.click.aliexpress.com/e/_Ddp...
Magneto stator 18 Coil: s.click.aliexpress.com/e/_Deo...
Fork Seals & Dust Cover: s.click.aliexpress.com/e/_DFc...
Front & Rear Cylinder/Piston & Head Gasket Kit : s.click.aliexpress.com/e/_DDd...
Pistons and Rings: s.click.aliexpress.com/e/_DCE...
Connecting Rods: s.click.aliexpress.com/e/_DCf...
Rocker Arm s.click.aliexpress.com/e/_Dkc...
Cranksaft: s.click.aliexpress.com/e/_Dds...
Engine Oil Pump: s.click.aliexpress.com/e/_DlM...
Engine Gasket Set: s.click.aliexpress.com/e/_Dd9...
Exhaust Valve: s.click.aliexpress.com/e/_DCM...
Motorcycle Mirrors 10mm: s.click.aliexpress.com/e/_DdT...
Mirror Brackets (M10-22MM): s.click.aliexpress.com/e/_DBF...
Backrest / Sissy bar: s.click.aliexpress.com/e/_Ddx...
Backrest/ Sissybar and Rack: s.click.aliexpress.com/e/_Dmx...
Aftermarket Rear Brake Light: s.click.aliexpress.com/e/_DcR...
Rear Tail Brake Light: s.click.aliexpress.com/e/_DFJ...
Oil Filter : s.click.aliexpress.com/e/_Dcf...
OEM Style Air Filter: s.click.aliexpress.com/e/_DEC...
Clutch Plates: s.click.aliexpress.com/e/_DFF...
Rear Drum Brake: s.click.aliexpress.com/e/_Dm0...
Front Brake Pads: s.click.aliexpress.com/e/_DBs...
Front and Rear Brake Set: s.click.aliexpress.com/e/_Ddo...
Rear Brake Line Cable: s.click.aliexpress.com/e/_DFm...
Steering Bearings: s.click.aliexpress.com/e/_De4...
Throttle Cables: s.click.aliexpress.com/e/_DES...
Ignition Start Switch/Fuel tank cover/Keys: s.click.aliexpress.com/e/_DCq...
Front & Rear Seat: s.click.aliexpress.com/e/_DB4...
Bobber Style Seat: s.click.aliexpress.com/e/_DFW...
Bobber Rear Fender: s.click.aliexpress.com/e/_Dlr...
Gas Tank Decal Sticker: s.click.aliexpress.com/e/_Dl3...
Virago Tank Emblem: s.click.aliexpress.com/e/_Deq...
OEM Style Footpegs: s.click.aliexpress.com/e/_Deg...
OEM Style Rear Springs (Stock Height) : s.click.aliexpress.com/e/_DC4...
Rear Springs 10.5": s.click.aliexpress.com/e/_DBB...
Left and Right Controls: s.click.aliexpress.com/e/_Den...
Speedometer Cable: s.click.aliexpress.com/e/_DDZ...
Join the Yamaha Virago 250 / V-Star 250 / XV250 Facebook Group:
/ xv250

Авто/Мото

Опубликовано:

18 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@JohnSmith-cf4gn 7 месяцев назад

I remember in the 60s a 250 was a midsized bike. Most kids had 80, 90, 125, and 175cc bikes. I say kids, like 15-18.

@nemowilson3319 Год назад

This was absolutely inspiring

@mozzer8234 2 года назад

You're a pro, this is amazing to watch and really amazing to see the finished product! Might have to swap my handlebars out to something like that.

@markleeson3453 Год назад

Small bikes can be so bad. Love your work.

@Yowzoe Год назад

Totally loved your video, the editing, and the tunes. And appreciate your parts list. You did an amazing job.

@michaelbrinks8089 6 месяцев назад

Looks Great 👍......I love the idea of 70-75 mpgs....To make the bike more practical....I'd weld together a nice looking black rear rack that could hold a nice looking triple bag set.....My neighbor drives about 40 miles round trip 5 days a week for work.....In a big V8 Chevy Silverado, I keep telling him a used $2,000 70mpg 250 virago would pay for itself in a combination of gas savings & truck wear & tear.

@moto_zomby5479 2 года назад

Came out great! Nice work 👍

@Drew_TheRoadLessTraveled Год назад

I am about to start a top-end rebuild on my ride. Got a few awesome ideas from your videos. You make it look easy mate.

@def-vlog Год назад

It came out so handsome. You did amazing job.

@patrickmarrone8565 4 месяца назад

looks great man!

@carstenjnson1663 10 месяцев назад

It's wondeful bike to work at. I did a somewhat similar job on the wifes xv250 about 3 years ago. Furthermore it is a surprisingly well driving bike. Nice job. Enjoy the ride. 👍😉

@realbrandonb Месяц назад

Goin to buy a 2005 virago tomorrow for my first bike. I’m super excited and even more excited now knowing all the possibilities this bike has for styles

@joshramesy4306 9 месяцев назад

Love your work and your videos where you just talk and explain what you are doing. You're very good at it and they are really informative. The music ones, not so much. I turn the sound down because I find the music annoying, as in this one. The parts list/links are especially appreciated. JMHO.

@PILATUS1968 Год назад

nicely done

@LeoReo88 5 месяцев назад

Why such hidden gems were never know or sold world wide 😢

@uknowwho214 2 месяца назад

There pretty much everywhere lol. Sold like that till damn. Near 2020 Yamaha xv250 is the name on other places

@reggiesparks4357 Год назад

nice build

@murielcosx 3 месяца назад

amazing!

@federicorossini9566 Год назад

hermoso trabajo , felicitaciones 😎

@ivanatepi9602 9 месяцев назад

IT'S A BEAUTIFUL JOB

@ivanatepi9602 9 месяцев назад

which rear light did you use?

@alejandroambriz5319 10 месяцев назад

Im here dreaming about that bike! Small cc bikes are so cool

@cliffmcleroy8168 5 месяцев назад

Nice video. I've always liked that little V twin and have thought about "un-chopping" it with an 18" rear rim and longer shocks.

@Mrfungolao Год назад

Bellissima!

@bawwaabiodun751 8 месяцев назад

Amazing Job, how I wish I could do that to mine too

@piotrbakakalarski5006 Месяц назад

Wow!

@RichardEllwood 3 месяца назад

GOOD MUSIC.

@ryan.thedirector Год назад

i like your prj so nice

@frxtrd1033 10 месяцев назад

WooW 😮

@TheREALOC1972 Год назад

Not a fan usually of dark colors but that thing looks amazing. I just bought a brand new 2022 VStar-250 and I'm getting ready to bob it. I'm going with a retro 1970's paint scheme though. Painting the frame and all the chrome Burnt Copper, Painting the engine Bright Brown, Tank and Fender will be White with retro brown, yellow and orange fat pinstripes.

@TheREALOC1972 Год назад

@@MotoGearSolid Yeah me too and I got the bike DIRT cheap because it is a left over floor model.

@DmacDomage 10 месяцев назад

Great to see you got rid of those teardrop electrics housings up front.

@DmacDomage 11 месяцев назад

@@MotoGearSolid well it's admirable work. You made the Virago look how it should have in the first place. Thanks for the vid.

@FullSpeedMoto Год назад

Loved the result. How did you get so good at working on bikes?

@sergio..924 9 месяцев назад

Buen trabajo.Ahora cuesta el doble

@ortho333333 2 года назад

Nice WORK! What clutch and brake levers would you recommend?

@imrichlesnak5474 Год назад

Sick build.🤘 Have you rejetted carburetor after installing exhaust?

@BKRcustommotorbikes Год назад

hey mate, love your bike. just wondering is that rear fender cut or stock length?

@au1317 17 дней назад

Good job and looks great but isn't it bad to paint the cooling fins on the engine?

@CrazyPalidin57 Год назад

Could you please tell me where you sourced the Airfilter pods from if you still recall.

@rofizzleful Год назад

Hey man, I commented on your videos last year as I had the same bike and also within the GTA. I had allot of fun on it but started experiencing issues end of season and the bike would start fine but start dying once I take it into gear. I think it has something to do with the carbs but I'm a newbie so not sure. I want to get rid of it and move onto something more reliable but wanted to reach out if you had any opinions that could help me out and what I should do.

@iEduardian21 Год назад

thats a nice ripper bike! whats the headlight?

@_Inquisitor Год назад

How’d ya get the led blinkers to work ?

@Ambeauinc Год назад

Song name for the teardown section? Dude was shredding😂

@birddaddydetta 10 месяцев назад

Did you use any manual or resources on how to tear the bike down? I gotta do some tinkering myself

@titomaudungca 10 месяцев назад

are those adjustable preload shocks?

@BulletproofPitbulls Год назад

TORONTO? I have one too but I need to find a few parts

@lokococo9825 3 месяца назад

What exhaust you have brother?

@kieranlavoie8124 2 года назад

What exhaust is that?

@dinizgaragem-bikesretro7428 Месяц назад

Farolete traseiro é de qual marca se tiver como enviar o link aliexpress do modelo

@Buddychrist420 11 месяцев назад

Where did you find the parts at?? I can’t even find a replacement choke cable that matches

@Buddychrist420 11 месяцев назад

@@MotoGearSolid you are a god among men

@Uchia598 Год назад

idk how you did it man, i cannot find shit for my 2022 XV250, very jealous

@Uchia598 Год назад

@@MotoGearSolid was looking to change the sprockets to a 17-40 but everyone I've talked to says they cannot find compatible parts as the bike is just that "rare"

@AlexeyDenisiuk Год назад

Wow. Looks awesome. I have the same bike Yamaha Virago 250 but 2003 year, I need to change a chain. But I cannot find info about how much links should be on a chain. Manual tells 140 (520DS / D.I.D.) but in Amazon there are chains with not more than 120 links. So how many links should be on the chain when it on the bike?

@AlexeyDenisiuk Год назад

@@MotoGearSolid Wow, I tried to find 1400 links )) Yeah, 140 links are present on the market, thank you ps: I am from Richmond Hill

@AlexeyDenisiuk Год назад

@@MotoGearSolid by the way, I am trying to understand on how I can decrease a tension of a chain? How to increase I know, it is easy, but the other way, no ideas so far. For example www.manualslib.com/manual/612313/Yamaha-Drag-Star-Xvs250.html?page=55#manual This nut on the #3 goes only in one direction, which helps to increase tension.

@biomozgjele 10 месяцев назад

please tell me where you got those rear turn signals and exhaust pipe?

@biomozgjele 10 месяцев назад

@@MotoGearSolid tnx!

@makro3599 Год назад

Man really good looking bike. I have xv250 myself. I meen i bought it from my uncle. I wonna make some restauration on it. But is it really most parts from aliexpress? Is it reliable there?

@makro3599 Год назад

@@MotoGearSolid What year was motorcycle produced?

@makro3599 Год назад

@@MotoGearSolid Yeah, but yours? And if its not a secret, how much did you spent into this project?

@RobertHerrick-ik9kk Год назад

Ever realize that the aftermarket exhaust bracket is mounted on the swing-arm??

@RobertHerrick-ik9kk Год назад

Ran into this issue after I bought and installed too lol

@zero18v26 4 месяца назад

Sound name please???

@sheharagangul6271 2 месяца назад

Can you give me that original parts , Pleaseeee!!!!!!!!!!

@HighAway 2 года назад

That is rad. i bet youre gonna sell it. i have mine as second owner and its completely stock. i really want do two things on it. the pipe and sprockets change.

@HighAway 2 года назад

I totally agree however, none of the stuff I have what you have!!