Motorcycle Spark Plug And Coil Replacement 2004 Yamaha R6 

Best video I’ve watched everyone else makes shit seem hard. Thx

Today my bike seemed like it would be running a cylinder down so hopeful l6 with the help of this video I can fix my issue thanks man

Also did you not check the gap on the plugs? Did you increase the gap at all a bit?

Hell the frick yeahhh!!!! 04 R6 all the way!!!

Is it possible to remove the cooler water ?

Nice vid.. The right side of the airbox sitting on bike. Is it possible to get the 2 hoses wrong way round. I'm sure I done it right

How are those coils holding up ?

How did the coil spec coils hold up? I have an 05 and I hear the stock coils are junk. Curious if this work good?

Was it tough to put the new coils in? I’m having trouble getting them to sit right. Any advice or tips?

didnt think it would cost much on coils :O like holy cow! i love my baby so i know its all worth it :) ride safe to all my fellow riders around the world :) Thanks for the tutorial btw and love that R6!

What number of wrench is used to remove the spark plug?

Thank you for the information you provided I just changed my sparks and ignition coils

If I'm gonna replace the 4 of them. Does it matter the order to put the new in?. Thank you for sharing

hey man just a lil question: were the original coils all easy to remove? I'm wondering caus mine are sitting tight as hell :D did you pull them out with your hands?

Your new spark plug is different from the old one.... does it really matter?

Man i just checked my bike in the shop for a stator rectifier problem i was having and i am on the boderline of wether of not i should do the plugs and coils myself or uave my guy do it. But it s may the weathers nice and the downtime when i check her in is at least 2 weeks!. (I live in south philly PA and take my bike to south philly cycles.... Arnie the master mechanic is they best at what he does and very resonable!) I have a few questions that is going to help me decide if this is gonna be a job i do or let Arnie do.... first. U said some of the plugs are hare to get out.... which extention kit did you use to reach them all? And second when you buy the new spark plugs do you have 2 Gap them? And if so where did you find the proper gapping sequences? You are one of the few videos on here that simplified this job down to what it really needs and takes and i appreciate all the extra nonsense being left out! This is why iam asking you.! Lol.... i will definitely take your advice on the coils and plugs and i just put a new k& N filter in when i changed the oil as i used a k& N oil filter and it was buy one getbanother product half off! Not bad Right?? Lol. Anyway please let me know when you get a minute the extentions and gap techniques if any.! Thankyou so much for rreading all my blabber. Lol Brian from South Philly.... Also as a advet bike rider yourself you know how hard it is haveing your bike in the shop! By the way loved the video brother! And beautiful Yamaha!

If you’re having trouble removing the coil packs like I was the secret is to twist them while pulling up at the same time

How can you tell it’s misfiring?

Great song

Just changed mine. Really hard but neccessary. First streetbike, 2007 r6s. It's a little too fast for me lol.

I bought this bike and it was running fine. The bike had no fearings, the previous owner stripped the headlights and taillights off to make a bobber and half ass integrated a kc headlight. I replaced spark plugs and coolant and after about a week the headlight kept blowing a fuse ( not the Main) . I cleaned up the wiring and tracked down any grounding issues and I cut back some wiring at the back of the bike which was melted and looked like a turn signal but had the headlight spliced into it.I’m not sure if this caused me to receive no spark. I replaced the old CDI box with a new one checked all the plugs and fuses but I’m still not receiving spark .. I’m not sure if it’s the ignition coils because the bike was staring before but I may have caused a short while trying to correct the wiring. Can anyone please help !!!!!

What plugs did you use?

I see you like Alan Walker. Same here!

Why did you replace the coils as well? Did you enjoy the before and after feeling riding it?

Im having similar problem, but now my battery keeps dying & exhaust sounds like somethings clogged in it

These models certainly have some issues with the coils. I've done this job minus about 37 steps. Just remove the two radiator bolts and slide the radiator out of the way. You can then reach the coils and plugs for removal/replacement and save a lot of time!

Good video but its harder then this video i changed my plugs and i had to walk from my bike being frustrated

Didn’t need 2:20 to make me feel more alone 😐

THIS IS NOT A 2004!!!!!! get it right