No video :(

Motordyne MREV 2 & 5/16 Plenum Spacer Review (Nissan 350Z) | AnthonyJ350

Подписаться 118 тыс.

Просмотров 22 тыс.

50% 1

We talk about driving impressions after installing Motordyne's MREV 2, Plenum Spacer with the Iso Thermal upgrade in our 2006 Nissan 350Z with the REVUP motor.
Products Installed:
-MREV 2
-5/16 Plenum Spacer
-Iso Thermal Upgrade
-Throttle Body Spacer
Here is the MREV 2
rover.ebay.com...
This is the Plenum spacer with the iso thermal upgade
rover.ebay.com...
And this is the throttle body spacer
rover.ebay.com...
Show less
#Motordyne #MREV2 #Nissan #350Z
motordyneengin...
Subscribe for more automative tips!: bit.ly/sub2anth...
Watch my most popular uploads!: bit.ly/anthonyJ...
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com...
Music available - www.jinglepunks... & www.epidemicsou...
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavef...) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Motordyne MREV 2 & 5/16 Plenum Spacer Review (Nissan 350Z) | AnthonyJ350
• Motordyne MREV 2 & 5/1...
ANTHONYJ350
/ anthonyj350

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 174

@AnthonyJ350 7 лет назад

Anyone looking for the parts install on my car I've listed them below. Here is the MREV 2 rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337982243&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FMotordyne-MREV2-Intake-Manifold-350Z-2003-2006-G35-2003-2006-%2F292069907530%3Fhash%3Ditem4400b91c4a%3Ag%3Asm4AAOSw5VFWOkdX%26vxp%3Dmtr This is the Plenum spacer with the Iso Thermal Upgade rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337982243&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FMotordyne-Copper-5-16-Inch-Intake-Plenum-Spacer-Fits-350Z-2003-2006-%2F302249679723%3Fhash%3Ditem465f7c1b6b%3Ag%3ApHEAAOSwMmBVzQQ4%26vxp%3Dmtr And this is the throttle body spacer rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337982243&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FTHROTTLE-BODY-SPACER-for-2003-2006-NISSAN-350Z-%2F162142578555%3Fhash%3Ditem25c073677b%3Ag%3AR~IAAOSwHoFXuhAJ%26vxp%3Dmtr Show less

@louismeola9840 6 лет назад

AnthonyJ350 which spacer would u suggest for a florida climate . I have an 03 g35 coupe

@alangamboa8780 6 лет назад

AnthonyJ350 so this is a DE motor ? Sorry I’m getting into 350zs and am interested in getting some go upgrades

@brandontruong9172 4 года назад

What exactly is the Mrev2? If I'm completely stock will it still give me any HP gains?

@heatran123 7 лет назад

I always thought you drove your z very carefully because of the way you have that attention to detail on a lot of things, but this proved me wrong 😂 very entertaining pulls/ skids, Keep it up!

@AnthonyJ350 7 лет назад

heatran123 Haha well the company is called Go Fast have Fun. I like to drive like everyone else ;)

@NewportRegular 7 лет назад

Keep up with the 350z videos! Love them!

@AnthonyJ350 7 лет назад

Thanks! That's great you're liking them!

@mikeg6991 5 лет назад

I have an ‘04 touring with the plenum spacer and mrev2 along with the jwt pop charger. Added some nice rumble and mid-range power. Sharpened the throttle up very nicely.

@AnthonyJ350 5 лет назад

Awesome!

@petermabbort456 5 лет назад

Hey Anthony. Your vlog is a godsend buddy. Building a surprise hot rod 350z for the Wife. Was planning on the plenum spacer and a few other mods you mention. A quick question ... I’ve seen cheap “race” headers for a 350 on eBay for a couple of hundred bucks. I’m sore you’ve seen them too. Are they worth the buy? I know they’re a birch to fit but I don’t mind that if it’s worth it. Any thoughts?

@AnthonyJ350 5 лет назад

On an N/A setup it's not much gain for power vs cost and time. The intake manifold and a Motordyne XYZ pipe with test pipes and aftermarket it exhaust will yield a better gain after you get it tuned. That being said, after I have my engine rebuilt, I will most likely install Z1 Headers and it will be am N/A build.

@philthethrillohio 6 лет назад

By far best mod for a rev up

@AnthonyJ350 6 лет назад

philip shamoun How did you find the video?

@jellofuel 5 лет назад

Loved the tunnel bit! Revup owners on a budget can just buy a stock DE lower plenum and plenum spacer. Motordyne buys DE plenums, modifies them, and sells them for roughly 10x the price. I've noticed the same thing with the shifting as well, only I now run the revup plenum, so I'm shifting more often.

@AnthonyJ350 5 лет назад

You're basically paying for a port job. You're right, if you're on a budget get a used DE version.

@benjamindo8142 5 лет назад

I've heard the same that md lower plenums were off 03-05. I see one off a track edition in a junk yard for real cheap. If purchased is port & polish necessary lol?

@rollinthesweets6147 3 года назад

@@benjamindo8142 you’re paying for the milling, on an mrev2 the tops of the intake runners on the front two are milled down 5mm and smoothed out...I have access to a mill at work and modified a non-revup plenum just like an mrev2 but also ported out the runner outlet to match the lower manifold ;)

@joaquinmalagon9343 2 года назад

Hey man great videos! I enjoy your attentions to detail, do you have any experience with 03-05 DEs? Looking to see what feels more punchy, Rev-Up + MREV2 vs older DEs. Thanks!

@AnthonyJ350 2 года назад

Thanks for watching our videos! The REVUP has more of advantage having variable valve timing on intake and exhaust (regular DE is variable intake only). If you plan to super charge it a 2005 regular DE might be cheaper to buy and be a good candidate.

@joaquinmalagon9343 2 года назад

@@AnthonyJ350 Thanks for the reply man! Do you have any experience driving the 03-05 DEs?

@trevorkirkby5461 7 лет назад

do you do installs ? I have an MREV2 & a spacer that I would like to get installed. I see the care that you put into your work and I fully appreciate it.

@AnthonyJ350 7 лет назад

I can do installs for electronics professionally. Mechanically I just do it for my personal items. Are you in Vancouver? I recommend the Z Shop in Surrey, Dan is the best Nissan mechanic in the Lower Mainland.

@aey2579 4 года назад

I have a 2006 G35x, not looking to race or anything. Its my everyday driver. Is your opinion to do the Iso Thermal Upgrade first? Thanks!

@AnthonyJ350 4 года назад

I would do the Iso thermal along with the MREV2 and 5/16 plenum spacer. Do all of the work at the same time and just do it once.

@trigg7738 7 лет назад

Hey! let me know who you go with to do your tuning. I live here in the tri cities and am looking for a good place to tune my 350z as well. A cruise and photoshoot of the cars sometime might also be cool.

@AnthonyJ350 7 лет назад

I'm thinking about going to Racing Greed. Maybe try to get another person and do a group buy? Message me on my facebook page and we can exchange information.

@Rolilasx 7 лет назад

lol this video`s timing is amazing. THere are high chances I will buy a g35 with mrev2 on it

@AnthonyJ350 7 лет назад

Rolilasx It's so much better with it. Does the car have a tune?

@xTemoTee 7 лет назад

Rolilasx Just FYI, so no one wastes their money. The mrev2 is really "only" beneficial for "rev up" motors. If you do have a rev up motor, then I totally recommend getting the plenum spacer w/ the mrev2. They're a beast combo for bolt ons. Oh and welcome to the G fam! :D

@Rolilasx 7 лет назад

Yes, it is a revup engine (2007 g35), and it has both the mrev2 & spacer. The car does not have a tune, but after I get it I intend to put on a lighter flywheel and get it tuned, it should be great! Especially considering that my current car is a 7th gen Celica xD

@martezhobson7695 7 лет назад

Temotee that's not correct, it's the PLENUM SPACER that doesn't do very much at all for the Rev-up motor. There's good improvement with the spacer on non-revup motors

@edrixb58 6 лет назад

Martez H so if it doesnt rlly do much with the rev up motor, how come its common for ppl to purchase it for their rev up motor?

@socalecos550 5 лет назад

Anthony what do you think of the kinetix v+ upper plenum...?..thinking of installing it with my mrev2 and spacer with intake?

@frankieforza 3 года назад

Did you do it?

@socalecos550 3 года назад

Did it a long time ago 😎

@AnthonyJ350 3 года назад

The composite version has a little flex when hot. Seems good otherwise. I think durability wise you can't be stock with the Motordyne spacer.

@travisanderson9387 6 лет назад

Odds of you seeing this are low, but what is a Rev up engine? Are you just talking about a VQ with a RevUp tune? Or am I missing something here?

@AnthonyJ350 6 лет назад

Travis Anderson Revup debuted on the 2005 Anniversary and was on manual 2006 350Zs. It had more power because it was equipped with variable valve timing on intake and exhaust. Regular DEs only have variable timing on intake.

@KewlBreezeKeez 7 лет назад

Update, hows the mrev2 set up so far without a tune, I'm considering this setup & def don't have money for a tune. How are things holding up as we speak?

@AnthonyJ350 7 лет назад

KewlBreezeKeez Really good. I have no complaints with reliability or driveability.

@JeagerTank 7 лет назад

what about splicing the coolant line and installing a valve to cut off the fluid flow under the throttle body? it would reduce the running temperature and in cold weather you can open the valve up and allow it to warm the throttle body.

@AnthonyJ350 7 лет назад

Lex Pro Yup you can totally do that. Motordyne sells a valve to do that or you can make your own. I did the copper plate because I just don't want to think about it.

@AnthonyJ350 7 лет назад

I have two videos for you regarding this. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SXZq0NOgsbU.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YbFCvkx_1kA.html

@Z33Garage 7 лет назад

dude, you should install a polyurethane transmission mount. Spacer aside, the best mod that I can feel while driving the Z so far.

@AnthonyJ350 7 лет назад

Z33 Garage Already has it with Poly urethane diff carriers

@Z33Garage 7 лет назад

AnthonyJ350 niiceee!!!!

@jordang8442 4 года назад

Hello, is it recommended to use new gaskets once cracking everything open or can you reuse the oem?

@AnthonyJ350 4 года назад

It's never a bad idea to get new gaskets.

@themanny4089 7 лет назад

would you recommend mrev2 for a non rev up engine i have a 2004 non rev up, and also i was thinking bout getting a plenum spacer, should i?

@AnthonyJ350 7 лет назад

Sorry about the late reply. If you're on a budge it's not necessary. Motordyne still claims you'll get an improvement. Best bang for your buck is the plenum spacer.

@AtroposLeshesis 6 лет назад

TheManny408 not really. Not for what they want for one and what you get. 5/16 spacer and thermo kit, tbs and pop charger all you need for intake.

@Rolilasx 7 лет назад

I`m really curious to see how it will go for you after the tune. Good luck!

@AnthonyJ350 7 лет назад

I have an appointment on April 20th and plan to do a video on it while it's on the dyno, so stay tuned!

@MotordyneG35 7 лет назад

After reviewing your exhaust, it is not a true dual exhaust. It is just a single exit, 3" exhaust. I'm curious on your gains also, but I'm guessing not more than 25whp. I had a true dual 2.5 inch Invidia Gemini and only got 24whp with test pipes on the dyno, rev-up motor too. Mods were: - Motordyne MREV2, - Motordyne 5/16th spacer - Long tube Injen CAI - Resonated test pipes - Invidia Gemini exhaust Once Motordyne ART pipes and Motordyne Shockwave, did I get up to 37whp/45wtq. The Shockwave is a true dual 3 inch exhaust. The MREV2 with 5/16th spacer will give you that wtq number in the 30's, the Motordyne Art pipes will get you up to the in the 40's for wtq. Good luck, I'm sure I will see the upload. Final mods: - KW v3 Coilovers - Injen CAI - NWP 75mm throttle body - Motordyne MREV2 - Motordyne 5/16th spacer - Motordyne v3 ART pipes - Motordyne Shockwave TDX2 exhaust.

@AnthonyJ350 7 лет назад

Motordyne G35 With the amount of power these cars produce, 3 inch single will still flow fine. I guess we'll see what it will do. Did you change your bushings in your diff carrier and transmission. Did you notice I focus on driver interaction? I just want the car to drive well, not too concerned about telling eveyone I see my dyno numbers (it's not that powerful of a car). I have a project truck with a custom built small block for horsepower that I'm tinkering with for that.

@AnthonyJ350 7 лет назад

Motordyne G35 Another note, your comment made me remember. I watched an episode of Ignition on Netflex. The Nismo GTR is single exhaust. It goes from 2 to 1 long pipe the has a Y at the end. That car makes more power than our cars ever will. And yes I know it's a forced induction application, with titanium exhaust and it has heat sinks to cool the exhaust.

@MotordyneG35 7 лет назад

Exhaust size does not matter when you can just turn the boost up or you have boost to begin with. On a NA application like yours, it does matter. Only 25whp gains, I'm positive and you will see for yourself soon. Yes, I changed my diff bushings and rebuilt my diff when I had it out, also added the Nismo cover which is like a heat sink with fins to cool the diff, plus it adds an extra quart capacity.

@risingdomain5201 4 года назад

Mrev2 is a port and polished non rev up lower plenum. Has anyone just tired a regular non rev up plenum on the 05+ rev up engine???

@AnthonyJ350 4 года назад

I'm sure people people have but there's a reason people prefer the MREV2, it yields the best gains. If it were negligible people would stop recommending it.

@mvtt24 3 года назад

I’m a little late to this video but as a budget option could I use a non rev up lower plenum with a 5/16th spacer?

@AnthonyJ350 3 года назад

Yes you could, not sure what the gains would be. Try searching on www.my350Z.com and see other peoples feedback. I'm sure a bunch of people have done it.

@johnayeee640 7 лет назад

Do you have links on where to buy all the parts you installed? I also have the rev up motor

@AnthonyJ350 7 лет назад

Here is the MREV 2 rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337982243&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FMotordyne-MREV2-Intake-Manifold-350Z-2003-2006-G35-2003-2006-%2F292069907530%3Fhash%3Ditem4400b91c4a%3Ag%3Asm4AAOSw5VFWOkdX%26vxp%3Dmtr This is the Plenum spacer with the iso thermal upgade rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337982243&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FMotordyne-Copper-5-16-Inch-Intake-Plenum-Spacer-Fits-350Z-2003-2006-%2F302249679723%3Fhash%3Ditem465f7c1b6b%3Ag%3ApHEAAOSwMmBVzQQ4%26vxp%3Dmtr And this is the throttle body spacer rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337982243&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FTHROTTLE-BODY-SPACER-for-2003-2006-NISSAN-350Z-%2F162142578555%3Fhash%3Ditem25c073677b%3Ag%3AR~IAAOSwHoFXuhAJ%26vxp%3Dmtr

@deftones2684 7 лет назад

Hey Anthony do u know if the plenum spacer will make a car fail smog?

@AnthonyJ350 7 лет назад

Just make sure you do the ECU reset that way you don't trip a check engine light. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5tQm28K32SQ.html

@deftones2684 7 лет назад

+AnthonyJ350 Oh wow ok thanks man.

@ahumm8280 6 лет назад

No, only if the gasket is leaking and your CEL is on!

@mitchhippauf2422 Год назад

Anyone know what the LCD display is that he has in the center cubby hole?

@AnthonyJ350 Год назад

It's a Greddy Infometer Touch. Here's the video on it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-l9zGcAY3MQA.html

@ImSexyAndiFarted 4 года назад

I know this videos old but at 0:56 your idle and engine just sounds loud mine sounds like that is that just a normal z thing ??

@AnthonyJ350 4 года назад

Since this video I now use Castrol 5W40 sythetic and it's much more quiet at idle.

@themanny4089 7 лет назад

hey i have a non rev up engine and was wondering if i should get a plenum spacer or a iso thermal upgrade what would you recommend? and would you recommend mrev2 for non rev up engines?

@AnthonyJ350 7 лет назад

TheManny408 mrev2 might give some gains. But installing the is thermal upgrade with the 5/16 spacer is totally worth it for your motor.

@themanny4089 7 лет назад

AnthonyJ350 thanks for youre recommendation, i might just buy myself a plenum spacer and an iso thermal upgrade. with both of these installed, what should i be noticing?

@AnthonyJ350 7 лет назад

TheManny408 More midrange torque. Also you'll maintain more power as the engine generates more heat. When it's really hot you lose power.

@Turtlefarm 2 года назад

I’ve heard ppl say the spacer on the rev up is a loss in power? Anyone else hear this? I’ve heard unless you are adding the mrev2 with it it’s useless… I have a spacer… do I just not put it on?? Getting dyno tuned for bolt ons soon.. so I Wana make the best of it

@AnthonyJ350 2 года назад

What year is your car?

@AnthonyJ350 2 года назад

It is true, I highly recommend putting the MREV 2 on before you dyno tune. Car has a lot more midrange power. Too many people focus on the dyno number at peak horsepower, but you want a healthy power curve.

@Turtlefarm 2 года назад

@@AnthonyJ350 06 rev up

@AnthonyJ350 2 года назад

@@Turtlefarm I highly recommend the MREV2 with the Iso thermal gasket kit honestly.

@Turtlefarm 2 года назад

@@AnthonyJ350 ok but if I were to use just the spacer alone… it would lose power?? That’s true?

@jamiezeigler2481 7 лет назад

I'm looking to do this with 06 Z. Thanks!

@AnthonyJ350 7 лет назад

Jamie Zeigler Glad it helped!

@ajnunez8788 3 года назад

Why not a g tho

@ssr201az 7 лет назад

What kind of tune did you end up going with?

@AnthonyJ350 7 лет назад

ssr201az UPREV. Just posted the video

@tripeeplayz1489 4 года назад

What is that computer screen in the center console above stereo

@AnthonyJ350 4 года назад

It's a Greddy Infometer Touch ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-l9zGcAY3MQA.html

@SunnyV-0 7 лет назад

What exhaust do u have?

@AnthonyJ350 7 лет назад

You can check it out here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QsInchEe-g4.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8BWyB4eweNk.html

@trevorkirkby5461 7 лет назад

how long does it take to install the 2 items into a 350?

@AnthonyJ350 7 лет назад

Roughly 2.5 to 3 hours taking your time.

@space6712 6 лет назад

So you wouldn’t recommend this upgrade for 2003 VQ35DE motor?

@AnthonyJ350 6 лет назад

I do, if you have the cash for it. If you're on a strict budget money can be spent on other areas to get more value.

@space6712 6 лет назад

AnthonyJ350 so what would you suggest for performance parts other than the manifold and plenum spacer? Sorry for the noob questions, I just bought a second hand Z and trying to learn more about what I can do to upgrade the engine...

@AnthonyJ350 6 лет назад

Space 671 I would do the ISO thermal gasket kit with the plenum spacer from Motordyne (less money same amount of work though, helps prevent heat soaking) and do test pipes with Motordyne's XYZ Pipe with the high flow cat. I'm also a fan of the stock 2006 intake because it's serviceable and has a built in velocity stack.

@space6712 6 лет назад

AnthonyJ350 Thanks much man, that set up helps me narrow down my decision. Last question...If I use both MREV2 and Plenum Spacer will I be getting more out of it compared to just using only plenum spacer?

@AnthonyJ350 6 лет назад

Space 671 In theory yes. But the gain increases wouldn't be as big as the REVUP. The MREV2 is a reworked lower plenum from the standard DE so air moves better in key areas which they keep secret.

@samuelwilson6919 5 лет назад

Now all you need now is the oil catch can that's all you need

@AnthonyJ350 5 лет назад

Already got one 😉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iSzU-cvlLO8.html

@407youngvn 5 лет назад

Are you gonna tune?

@AnthonyJ350 5 лет назад

I actually did have the car tuned, you can watch the video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eC1-hE3PBf0.html Also if you want to hear what the car sounds like now: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P8_7EfQEYoM.html

@samson_BNR32 7 лет назад

really not worth it if i have a de? i thought it was a good bolt on

@AnthonyJ350 7 лет назад

ssmoly The MREV2 is a modified lower plenum from the regular DE motors. It will flow better than the stock one cause it's modified. But the REVUP really benefits from it the most.

@AnthonyJ350 7 лет назад

ssmoly If you don't have a REVUP your best value is the Iso thermal upgrade with the 5/16 spacer from Motordyne.

@socalecos550 5 лет назад

Anthony, I have a problem....after I installed my mrev2 and 5/16 spacer my engine light turned on?..I disconnected the battery...pumped the brakes...comes back on? Another thing I turned on my car and it breaths wierd ...feels and sounds like the car wants to turn off...I tried the pedal dance routine...still acts the same?

@AnthonyJ350 5 лет назад

Try the procedure again like this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5tQm28K32SQ.html also double check for any vacuum leaks.

@AnthonyJ350 5 лет назад

Did you put the hose back on the PVC for passenger side and intake tube?

@socalecos550 5 лет назад

@@AnthonyJ350 yes I did Anthony...wish I can show you my problem?..is there anyway?

@socalecos550 5 лет назад

@@AnthonyJ350 when I installed that machine reader to read my code it was a code called P0300...its a valve cover problem?

@AnthonyJ350 5 лет назад

@@socalecos550 You can post an unlisted video o RU-vid and send me the link to watch.

@kingalmighty3847 7 лет назад

Saulnismoknights , tuner out here in SoCal look him up on ig he sends tunes through email also

@AnthonyJ350 7 лет назад

I found a place called Racing Greed in my area that does a lot of tuning. Thanks though!

@moisescristobal6 5 лет назад

He’s pricey

@edrixb58 6 лет назад

Planning on purchasing the mrev2 and plenum spacer. Is it okay to drive the car without a tune? Im driving cross country in a month.

@AnthonyJ350 6 лет назад

Daddy Edrix Minimum you want to do an ECU reset ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5tQm28K32SQ.html. It is best for the car to do an UPRev tune on the dyno to make Sure everything is working properly.

@AnthonyJ350 6 лет назад

Daddy Edrix Also make sure you do an oil change before and right after your trip. Also possibly in the middle depending how many miles you put on.

@edrixb58 6 лет назад

AnthonyJ350 i dont wnna get tuned before i drive to cali (live in ny rn) cuz i only have an exhaust and an intake. Still waiting for more bolt ons, just wnted to make sure the engine will be okay with the mrev2 and spacer without a tune

@AnthonyJ350 6 лет назад

Daddy Edrix Should be ok. Just do the reset procedure in the previous video I sent

@edrixb58 6 лет назад

AnthonyJ350 thanks brother. I also left a comment on one of ur other videos, when u got dyno tuned,i know you get tuned to see how much whp ur cars making and to get the most out ur mods. But for the maps, do the tuners make the maps for u? Or do u tell them what u want?

@0riginalnorm 7 лет назад

Anyone have a rev up motor for sell with low miles?

@jeffreyxiong205 4 года назад

Are mrev2 carb legal?

@AnthonyJ350 4 года назад

You would have to contact Motordyne directly on that. Mine did not have a CARB compliant sticker. However it does not modify the emission system at all, you are simply providing more air to the 2 front cylinders which are being restricted, that's where the power increase is coming from.

@tabshaikh7646 7 лет назад

What is the thing above your stereo?

@tabshaikh7646 7 лет назад

Never mind I look at your previous videos and saw what it is. I just never got that in my notifications

@AnthonyJ350 7 лет назад

I think you have to turn notifications on with the new RU-vid thing. Do you get notifications for my other videos?

@tabshaikh7646 7 лет назад

AnthonyJ350 I get notifications for most of your videos.

@RickySticky87 7 лет назад

Hey would you ever consider with going with a SC?

@AnthonyJ350 7 лет назад

I'm thinking that's what I want when I'm bored with the car. Rebuild the motor with lower compression, beef it up and just run 5 lbs of boost. I want 400HP reliable.

@za1rol 6 лет назад

bro, i have a 2005 350z and its automatic and i don't know if got the rev up or non rev up? i'm not sure if i got the rev up one,

@AnthonyJ350 6 лет назад

Automatics are regular DE (NON REVUp). If you look at the front of the engine you'll only see one housing per side for the variable valve timing for the cam while a REVUp has two per side. REVUp was made only available for manual transmissions.

@za1rol 6 лет назад

AnthonyJ350 I like going fast so do I still need to buy the thermal with spacer from motordyne.?

@AnthonyJ350 6 лет назад

If you like going fast, then you'll want to maintain power and not heat up the intake plenum, so yes, buy the ISO Thermal kit.

@za1rol 6 лет назад

with 5/16 plemum spacer from motordyne right?

@richarddevreede4889 5 лет назад

Something is ringing shitty noise....de rev up ain,t that fast, that s why i sold it and took a 370 with enough tweaks which you really feel.next step a single turbo

@AnthonyJ350 4 года назад

Thanks for sharing your experience!

@antoniobernabe7724 7 лет назад

hella

@AnthonyJ350 4 года назад

Thanks for watching!

@RotoRCol 7 лет назад

Anytime youtube puts a commercial I will give thumb down

@AnthonyJ350 7 лет назад

rotoR Col So you want content creators to make all the effort, put all this investment in these videos for free because you can't be bothered to watch an ad?

@Rolilasx 7 лет назад

Really ? Do you think about the investment that a youtuber makes to do videos ? Thats the least you could do, watch that damn comercial and maybe even click on it just to help the person that uploaded the video. Show some grace, especially if you like the content.

23:54

Nissan 350Z/ G35 Plenum Spacer, Motordyne MREV 2 and Throttle Body Spacer Installation | AnthonyJ350

Просмотров 85 тыс.