MORE CUSTARD IS HERE!
This is the latest performance mod that I have installed on my Ford Focus RS MK3 and it is the roll restrictor aka torque mount aka rear motor mount from Mountune!
The Mountune roll restrictor is a direct replacement of the stock part. The stock part is OK for stock applications and when not driving hard but beyond this it could do with improvement. The stock mount/restrictor uses a relatively small rubber bushing that is quite soft so absorb maximum vibration but this has the undesired effect of allowing a lot of movement which is bad for performance.
As torque and power are increased over standard, the Focus RS mount will struggle to absorb the forces involved, especially with aggressive driving, meaning wheel hop could be an issue - think launch control!
This part is crying out for replacement if performance is what you are after!
Engineered and manufactured from high strength aluminium with a quality and much larger polyurethane bushing made by Powerflex, the Mountune roll restrictor upgrade provides improved rigidity for less movement under load while being specifically engineered not to add too much NVH (Noise Vibration Harshness).
I show the process of removing the stock mount / restrictor and then how to install the new Mountune roll restrictor, starting with the removal of the bolts before installing the Mountune part as well as a bit of extra advice that actually comes from Revo!
The installation didn't take too long and wasn't too difficult although working in that area under the RS is a bit of a tight squeeze and one of the bolts (the one at the top of the mounting plate) was a little tricky to remove and impossible to torque to spec - if you look up any other guides, you will see that they gloss over this point rather conveniently!
I am very pleased with the new mount / roll restrictor and will be sharing my thoughts on it soon in a future video but needless to say I think it is definitely worth doing!
Key features:
-Engineered and optimised for Focus RS
-High quality HE30 anodised billet aluminum body
-Bespoke size and shore hardness polyurethane bushes exclusively manufactured by Powerflex
-Reduction in engine movement
-Minimal effect on NVH
Check out www.becauseracecarbox.com and get your own awesome automotive goody boxes!
GET 10% DISCOUNT WITH CODE 'ADAM'!
Ships to Europe and USA as well as UK!
Check out Autobeam for epic car lighting upgrades at autobeam.co.uk/
GET 12% DISCOUNT (ORDERS OVER £20) WITH CODE 'ADAM12'!
Check out my teespring store:
teespring.com/stores/adam-rainey
Subscribe to my channel: bit.ly/29hfAm6
Instagram: bit.ly/2930j8A
Twitter: bit.ly/2930j8A
Check out Mishimoto at:
www.mishimoto.co.uk/
/ mishimoto
/ mishimoto
25 июл 2019
