MSD Atomic Intake, Katech 103mm Throttle Body, and Flex Fuel Gets Big Gains Up Top!!! 2016 Camaro SS

Подписаться 1,4 тыс.

Просмотров 12 тыс.

50% 1

Eduardo is back with his 2016 Camaro SS. This time we have added a MSD Atomic Intake Manifold, Katech 103mm Throttle Body and a DSX Tuning Flex Fuel Kit. Previously we made a best of 444hp and 456tq. Now we're cranking out 480hp and 465tq. You heard me right.... 480hp Naturally Aspirated on a Mustang Dyno!!! This combo started making gains just past 4000rpm, with the biggest coming at the top of the rev range. Peak gains were 36hp and 10tq.
Want more performance out of your ride?!?! Give us a call at 864-603-2010 and find out how!!!
sdracingllc@gmail.com
@sdracingllc on Facebook and Instagram
SD Racing... no tricks... no gimmicks... no number fudging... just RESULTS!!!

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@kenross863 Год назад

They do a good job. I’ve taken my car there and they said it would take this long but finished sooner and did good priced well

@ZZ-ed6wp 6 месяцев назад

Seems low for with a cam ??

@josephdixon507 Год назад

That’s my old SS Camaro. Blue Velvet Metallic. I see my plate on the fuse box and my rattle can painted reservoir cover over the antifreeze tank. Still rolling the black chrome wheels. Car still great with the ZL1 hood and IKON bumper cover on it. Traded in at Hare Chevrolet in Noblesville, IN on 9/23/2019 when I ordered my C8 Corvette. Damn I miss that car!

@juliocastillo5131 Месяц назад

What kind of wheels are those ??

@shawnboy4368 Год назад

Reading the comments drove me crazy 🤪 (Mustang Dyno) there a very low reading dyno but a better Dyno in general! Unlike Dynapack , Dynojet and so forth.. I will say this I don't understand why most tuners don't use the dynamometer software calculations to simulate the translation to these lower reading dynos since everybody wants to see numbers. Not to mention elevation and so forth.. Good job nice builds !!

@Christopher.dreamless 3 года назад

I want this setup. MSD Atomic, Katech, and DSX. Question; do I need the adapter plate if I get the 95MM throttle body instead of the 103mm? I have the LT1 engine, 2020 Camaro SS.

@sdracingllc1594 3 года назад

You may need to use the adapter plate that comes with the intake, you'd have to test fit and see. Though I would recommend putting a larger one like the 103 with that intake to take full advantage of it.

@fredA1234 3 года назад

Is there anyway to use the factory Camaro plastic valve covers?

@sdracingllc1594 3 года назад

There are no previsions on the MSD Intake Manifold to be able to use the factory engine cover that sits on the factory intake manifold.

@Bigburb1345 2 года назад

The MSD doesn’t seem worth it. I’ve seen 6th gens make 40whp off E85 alone and the Holley Hi Ram adding 30-38hp as well. However you’d need a bigger hood for the Holley so take that into expenses. Hi ram is 874 MSD is 1000-1300. Throttle body is another 400-500. Only for 30hp seems waste.

@austinunderwood6329 Год назад

I gained 44 wheel on e85 alone could be an issue with tuner honestly

@jaybird9943 10 месяцев назад

Throttle response, as well.

@jtkrpm1 Месяц назад

So the factory intake is a big restriction over stock?

@sdracingllc1594 Месяц назад

The factory intake only becomes a restriction when adding parts and tuning to the vehicle.

@jordangittins7171 3 года назад

When connecting the throttle body to the msd what did you have in between them?

@sdracingllc1594 3 года назад

Throttle body o-ring gasket

@reverenddon1 3 года назад

Great video! If you had to choose, what would you do first (after e85+tune), headers / exhaust or intake manifold?

@sdracingllc1594 3 года назад

Headers and Exhaust first, then intake and throttle body.

@Fluke2SS 2 года назад

Yes I did headers, X-Pipe, CAI E85. That was 459 rwhp and 477 rwtq for me. (dynojet) Debating on MSD and 103mm TB as well right now.

@Blakehenry11 5 месяцев назад

I did the opposite. I did cold air, intake manifold and throttle body first. Then I came back later and added E85 and LT's.

@sixto7217 5 месяцев назад

@@Blakehenry11do you remember how much whp you got with the cold air , intake manifold and throttle body?

@lawrencer588 3 года назад

Was this dyno run with E85 activated and E85 in the tank? I thought you can get 30whp just from the sensor, so you should have seen more gains with the sensor and TB and Intake manifold, right?

@sdracingllc1594 3 года назад

A lot of factors play into the dyno numbers. We had a little less desirable weather conditions than previously. Naturally aspirated E85 is typically good for 15-20hp on average.

@lawrencer588 3 года назад

@@sdracingllc1594so was e85 in the tank at time of the run? If not, those are great numbers from the TB and intake

@sdracingllc1594 3 года назад

@@lawrencer588 e85 was in the tank. The weather that day didn't allow for the best comparison on the mods.

@Hussain14000 3 года назад

Do I need tune for the 103mm tb and Does it fit with roto fab intake?

@sdracingllc1594 3 года назад

Yes you will need a tune for the 103mm Throttle Body. We were able to stretch the coupler that came with the intake for a stock throttle body on this car, so theoretically you could with the RotoFab intake. Ideally you would want to get a different reducer coupler to make it easier.

@michaelcampbell195 8 месяцев назад

I have the msd atomic intake, msd 103mm intake, and I'm having issues with it. its drive by cable. The engine wants to high idle until the truck is up to temp do to the TPS not thinking its below .4 for some reason. And the other issue is I can't blip the throttle quickly. the rev won't come down very fast. Completely dumb founded at this point.

@sdracingllc1594 8 месяцев назад

What year truck?

@carlospena9275 2 года назад

How is that only making 480? I got a 19 camaro that makes more with just full bolt ons with the same set up

@sdracingllc1594 2 года назад

What dyno was used?

@MrJoseeclipse123 2 года назад

Same here y have bolts on and have 502 hp tune by rpm

@sdracingllc1594 2 года назад

@@MrJoseeclipse123 different dynos will have different results. It is all about percent gained over baseline. Not being the ones that did the cam and initial mods I could not tell you what this one baselined at stock. Other than a typical GenV LT1 Camaro will be around 350-360whp on our dyno.

@MPLaws-en6pi 2 года назад

@@MrJoseeclipse123 I have a 2017 2ss with a built motor you're not making 502 horsepower to the wheel with just fbo

@MrJoseeclipse123 2 года назад

@@MPLaws-en6pi jaja I am making 612 whp watch rpm videos fbo heads cams know

@fredA1234 3 года назад

I just got the MSD Air Force intake but I did not get the 103 mm throttlebody I’m going to use the stock one for now is that OK?

@sdracingllc1594 3 года назад

The stock throttle body will work but a throttle body and intake manifold really need to be done together. They are a supporting modification for eachother. So you're not going to get a big benefit until you do add the larger throttle body.

@fredA1234 3 года назад

PS it’s the 2019 Camaro SS with a six speed

@modifyvehicleevolution7593 3 года назад

Sir what is a good torque wrench for this?

@sdracingllc1594 3 года назад

We use Snap-On digitals.

@theycallmechum 3 года назад

any idea what the power cable is for under hood?? looks like u had it disconnected

@sdracingllc1594 3 года назад

That was the battery cable coming from the trunk. We disconnect the battery for installing the flex fuel kit as a precaution.

@theycallmechum 3 года назад

@@sdracingllc1594 sweet thank you, getting ready to do Speed Engineering Long tubes and xpipe, atomic intake and Katech 103 TB

@sdracingllc1594 3 года назад

@@theycallmechum you're welcome. You'll have fun with that!

@demonhunter1453 2 года назад

How did you stretch the CAI intake tube over the 103mm TB? I feel like I've tried everything and it won't stretch far enough

@sdracingllc1594 2 года назад

You just have to make it go is all. No tricks, just stretch the heck out of it.

@insinez4978 3 года назад

Did you have headers as well ?

@sdracingllc1594 3 года назад

The car has longtube headers.

@martinpalacios6517 Год назад

hey quick question for anybody that might know. I recently installed a hi ram and 103mm throttle body on my Camaro and my old air intake doesn't fit anymore. any suggestions on which intake would fit on the throttle body?

@sdracingllc1594 Год назад

What intake do you have?

@eduardomoreno5668 2 года назад

What brand wheels are those?

@sdracingllc1594 2 года назад

I could not tell you, as we don't know.

@alejandromontes6148 2 года назад

What cold air intake did you use to fit the 103mm throttle body?

@sdracingllc1594 2 года назад

I can't remember what intake it had as it came in with it on.... but we just stretched the coupler to fit over the throttle body.

@Fluke2SS 2 года назад

@@sdracingllc1594 K&N Typhoon I believe is 103mm by default just FYI. My tuner did comment that my intake was pretty mean, so I figure with the MSD and 103mm TB it should be a perfect 103mm intake with no bottle necking.

@killiansteele1967 3 года назад

Do features

@sdracingllc1594 3 года назад

Lets do yours soon!

@nathanbrown4237 Год назад

Those numbers seem super low considering its cammed

@jesusceja-serrano2212 9 месяцев назад

Bro I was thinking the same thing ! Plus he has forged internals everywhere else . I’ve seen dudes make 530+ whp with all this before . These number must be because they’re in high altitude areas that’s the only thing that makes sense

@Gullyswift3 2 года назад

Its cammed n only made 446?

@sdracingllc1594 2 года назад

The cam is a very poor one for the application. It was installed by another shop.

@Gullyswift3 2 года назад

@@sdracingllc1594 i was about to say lol. My bolt on car makes almost makes 490

@zonamade3380 Год назад

@@Gullyswift3 you auto?

@Gullyswift3 Год назад

@@zonamade3380 yeah

@mickalousmaxwell2495 3 года назад

I make more than him and he has more upgrade

@sdracingllc1594 3 года назад

Same exact upgrades on the same brand and model of dyno?

@Lycan_Fragrance 2 года назад

Should of made over 5

@sdracingllc1594 2 года назад

Not on this dyno it wouldn't

@Lycan_Fragrance 2 года назад

@@sdracingllc1594 why’s that just curious

@Lycan_Fragrance 2 года назад

@@sdracingllc1594 I made 470 wheel on a mustang dyno 2016 2ss manual tsp headers/xpipe rotofab e85

@sdracingllc1594 2 года назад

@@Lycan_Fragrance for starters all dynos read differently, even within the same brand. That is why if you want the best comparison on mods do your baseline and tuning on the same dyno. Also this is an auto, not a manual. The manuals have less driveline loss than the auto's do, hence they make more hp at the tires.

@Lycan_Fragrance 2 года назад

@@sdracingllc1594 ahhh I didn’t know that with the autos vs man