The 16 degrees I referenced was the maximum total retard. That setting is the most retard that can be used. Meaning to say, if will not all you to pull out more than 16 degrees from the max timing reference. My 36 degrees of timing is the max timing reference 42 - 6 degrees. That means I can only pull out another 10 if I wanted to. To go beyond that, I would need to change the Max retard setting. Hope that clears it up. Thanks for watching!
Hi Chad, hope your setup is coming along. So the 6 degrees of retard is what makes up my static desired engine timing. So, my CT pickup is at 42 BTC, I have told the grid I want locked 36. So it retards 6 degrees (42-6=36). Next, I tell the launch retard to pull 5 degrees for a period of time. So, when active the 36 moves to 31 and then back to 36. (36-6=31). Hope that helps. Thanks for watching!
Hey setting up my grid and the main timing is at 35 degrees on my engine and I’m not quite sure what the max retard should be at a lot of people show there’s at 30 but I have a super comp car like yours and you have 16 could you inform me a little more on that?
