No video :(

MST RMX 2.5 Episode 6 Yokomo Big Bore Shocks UPGRADED | Alignment On Integy Setup Station!

Подписаться 883

Просмотров 8 тыс.

50% 1

Check out my instagram: www.instagram....
Timestamps:
00:01 - Introduction / Previously
01:24 - Yokomo big bore parts overview
02:41 - Shock piston assembly
02:52 - Oring greasing / install
03:21 - Shock ends assembly
03:58 - Filling shocks with oil
04:10 - Bleeding out air from shocks
04:50 - Shock bladders
05:21 - Final oil / caps
05:45 - Testing suspension
06:42 - Integy alignment rack setup
07:21 - Alignment before adjusting
08:36 - Rear toe / camber settings
09:50 - Front toe / camber settings
11:20 - Track run before flipping rear springs
11:54 - Flipping rear springs
12:32 - Track run after flipping rear springs
13:04 - Track laps
15:20 - My thoughts on the new upgrades
20:14 - Final thoughts / conclusion
Parts list:
1UP Racing Blue O-Ring Grease Lubricant (3g):
www.amainhobbi...
Reve D Aluminum Spring Retainer (2) (0mm Offset):
www.amainhobbi...
Team Associated Silicone Shock Oil (2oz) (10wt):
www.amainhobbi...
Reve D "R-Tune" 2WS 26mm Front Spring (Soft) (2:
www.amainhobbi...
Reve D R-Tune PC Rear 29mm Spring (Medium/Black) (9 Turn) (2):
www.amainhobbi...
Yokomo YD-2 LF Big Bore Shock Taper Piston (1.2x6):
www.amainhobbi...
D COMPETITION BLADDER / DIAPHRAGM [Topline] TP-305 TP-306 TP-307 TP-308:
supergdrift.co...
High Grade O-Rings Oil Free (8 pack) Blue [Yokomo] YS-7HG:
supergdrift.co...
HobbyPark Universal RC Shock Pliers w/Ball End Multi-Function Clamp Tools for RC Car Truck Off Road Buggy Rock Crawler (Gray):
www.amazon.com...
Yokomo YD-4 Titanium Coated Shock Shaft (4):
www.amainhobbi...
Integy RC Model C26395BLACK Professional Setup Station System for Most 1/10 Touring Car & Drift Car:
www.amazon.com...
Hobbypark Aluminum Alloy RC Car Work Stand Repair Workstation 360 Degree Rotation Lift Or Lower for 1/8 1/10 1/12 Scale Cars Trucks Buggies:
www.amazon.com...
Scale Drift Nylon Tow Sling W/Ring Hook Yellow 2:
rccarworld.com...
mst | rmx 2.5 | yokomo
#mst #yokomo #rcdrift

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@freerangehuman7016 9 месяцев назад

Finally made it to RC car world last week with my son to drift our yokomo drift cars an MD 2.0 and SD 2.0 on their track for the first time. It was fun. Learned a lot from it.

@edriftin 9 месяцев назад

Awesome! Hopefully we will cross paths one day. I have my eyes on the MD 1.0 and 2.0 for sure! Thanks for watching 🤘😎

@tittentei7331 4 месяца назад

I wish i lived someone place that have drift track🤣

@cecropiamatt8522 9 месяцев назад

I agree with what was said above, -9 camber in the front, it also likes a wider front than rear. I put spacers on my front lower arms to make my front track width and little wider and it helps keep the rear from over rotating. Also running a wider offset wheel in the front than rear helps aswell.

@edriftin 9 месяцев назад

Thanks for your feedback! I will give the -9 camber a try for sure.

@rcalchemy766 9 месяцев назад

Great Video!!! I've been keeping up with your Drift build! I started about 45 days ago with a Redcat RDS as the MST was not easily available when I got mine from mine from Hobbytown. I'm very pleased with the RDS, & just got a sweet set of Yokomo purple Big bore shocks like yours. I also went with the blue O-rings, 10wt oil & some ReveD springs. I actually am using the Reef's Gyro. It's super compact & has a cool aluminum hexagon case design. The Gyro seems to be performing well, although I probably wouldn't know a good one from a bad one this early in my Drifting Journey! lol One thing I've guilty of, is buying multiple sets of rims & tires to experiment...There's so many cool rims & awesome bodies available... It's mind boggling! I've got my eye on the Yokomo SD 1.0 LTS chassis & Futaba Gyro for my next build! From the videos I've seen, the LTS is supposed to be one of the most enjoyable models out there for scale realism! Thanks Again for the excellent content & info! Cheers from OIIIO 🔥🏆💯

@edriftin 9 месяцев назад

Thank you so much for watching and your feedback as well! The RDX is definitely one of the best chassis for the money that I have seen for sure. This hobby is a ton of fun and definitely a deep rabbit hole 🕳 I just purchased the Yokomo MD 1.0 limited edition chassis for my second drift setup which will be using turbo and boost. Stay tuned! 🤘😎

@percivale6511 8 месяцев назад

I love that 1UP racing Blue O-ring greese! I just built a RC10 B6.4 and I have the bug for building these RCs now.... I just ordered a Yokomo Super Drift 2.0 (Purple) Can't wait to get out there and drift with you all out here on the road! I also ordered the Redcat RDS RTR and a bunch of upgrades for that, figured I'd let the Nephews Drift that one around. Went with ReveD Servos, Futaba Gyros and Receivers with Hobbywing XD10 and D10 setup. should be a barrel of fun! That Alignment Rack is a great deal! I'm still using a RPM Camber Gauge and a Caliper for the Toe

@edriftin 8 месяцев назад

Nice! Congrats sounds like your all in as well haha I love this hobby. I picked up the MD 1.0 Purple Limited Edition to add to my garage. Hope to see you at the track for sure 🤘

@percivale6511 8 месяцев назад

@@edriftin yeah I've been doing a lot of research and I saw some information where people were saying that this Servo is pretty much the same as the Rev d RS-ST but it comes with the program module and is cheaper, AGFRC 19KG Low-Profile High-Torque Programmable-Digital-Servo - So I bought one of those to do some testing

@jokermahem666 9 месяцев назад

Another great video !!! These videos have been extremely helpful for newbies like me. Keep them coming !!!

@edriftin 9 месяцев назад

Thanks! I'm having a great time documenting my journey. Lots to learn and share for sure. Thanks for watching as always. 😎🤘

@cams5432 9 месяцев назад

I have been loving this series! Having just bought an RMX 2.5 not too long ago, it has definitely given me lots of upgrades to think about, and its great seeing the changes and hearing the opinions of someone else

@edriftin 9 месяцев назад

Glad your enjoying! Thanks for watching. Definitely more upgrades to come stay tuned 🤘😎

@tittentei7331 4 месяца назад

Great video! Have just bought a 2.5 e30. Great that you list up the parts! And you got a new sub:)

@edriftin 4 месяца назад

Thanks! Much appreciated.

@bluecast1 9 месяцев назад

I have the MST and it loves -9 to -10° camber and try something dramatic to see if it feels better or worse

@edriftin 9 месяцев назад

Thanks for the information! I will give it a try for sure. I wanted to start out a little less aggressive and slowly work out with negative camber on the front. 🤘

@JRW23 9 месяцев назад

Once you add that boost and turbo its gonna be way different

@edriftin 9 месяцев назад

I bet! I'm still debating on leaving the stock motor and esc on this setup and picking up another chassis for the boost and turbo upgrades. Thanks for watching my friend 🤘😎

@JRW23 9 месяцев назад

💯

@edriftin 9 месяцев назад

😎🤘

@tittentei7331 4 месяца назад

Btw. Can you tell me the name of your ESC and your servo? And do you think radio link r8cx is a good controller for drifting?

@edriftin 4 месяца назад

ESC is the stock hobbywing that comes with the MST RMX 2.5 brushless. The Servo is the Yokomo V2.

@edriftin 4 месяца назад

I have not seen the radio link. I'm using the Frsky Noble NB4 radio.

@tittentei7331 4 месяца назад

@@edriftin Then it is good. It almost same type of radio that you have.. I have screen on my controller and cam on mine if i want:) I edited because i did not see you had answer me:) On the ESC question.

@tittentei7331 4 месяца назад

@@edriftin Thanks. But it was orange/red?