having some issues running as v7 r1, some router directibly to r1 in v6 get the default gateway of neightbort router . (get the ethe1 ip of other router) any comment? what would be the problem bro? thanksfully for your answer
HI BRO MAY I NEED YOUR HELP and opinion R1 (PTPM BROADCAST) AND DEFAULT ROUTE ALWAYS V7 5 ROUTER DIRECTLY IN THE SAME BROADCAST DOMAIN in a bridge to r1 do they need network type ptpm broadcast on v7? and using still in 2 router v6 version should i set network type ptpm / broadcast? NOTE THE 5 ROUTER ARE DIRECTLY CONNECTED TO THE BACKBONE AREA AND JUST HAVE OTHER AREA FOR CLIENTS (had a issue in some test r2 getting as a default gateway eth1 r2 ip) The same set up was working fine as a v6 the 5 router directly to the r1 in a switch and in the same broadcast domain. i had upgrade the r1 to 2116 and it must work as a v7 version because it is recently produced. THANKS FOR YOUR HELP
Hi Nikola, thank you for your comment. You can add a new interface template including the loopback interface to advertise the loopback address. The simple thing that matters at this point is understanding how we can announce the networks that we need to. Note - If we are running MPLS or iBGP, we need to advertise the lo IPs since we can use them for transport and establishing the ibgp peerings. In my current topology, it's not required but we can do it for testing purposes as you mentioned.
hice todo tal cual pero no logro que el router 2 reconozca al router 1, el router 1 si reconoce al 2 le hago ping a los equipos sin problemas. Pero del otro lado no logro que reconozca al principal. No se que estoy haciendo mal, la misma configuracion tienen ambos
