Murray 425001x8A Deck Belt Replacement

Подписаться 333

Просмотров 14 тыс.

50% 1

Murray Select Lawn Tractor 42" cut. 17.5 HP Briggs & Stratton
engine. Replacing the deck drive belt. Removal of the deck
and defective belt. Reinstalling the mower and test. I had
previously done other maintenance to this deck such as
cleaning the underneath and lubrication of the spindles so
that is not really covered. The grease fittings are located on
the underneath on the spindle sides. Disconnect your
Battery, be strait and use common sense. Keep a fire
extinguisher close by at all times. If you don't
have any common sense, FORGET IT!!!
Cheers! 🍻 -Al Cox
Produced by Allen Cox.
060523COXTX
© Copyright 2023 Cox Music Productions.
All Rights Reserved for Private Enjoyment.
paypal.me@coxmusic
/ @bigalsmallengines

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@t.harris4309 Год назад

Yes this video will really help me out. I was given one these mowers. I know the drive belt is bad so I'm gonna replace both belts. You make that deck belt replacement look easy. Thanks.

@bigalsmallengines Год назад

You are welcome! Cheers! 🍻 -Al

@cindynapoli7530 2 месяца назад

Thank-you i will check with video and diagram for the belt

@alanconnors8881 4 месяца назад

Helpful video. I have a 2002 Murray rider. Just changed the blades. My deck was clogged up too.

@bigalsmallengines 4 месяца назад

Yeah I've been doing a much better job keeping on top of that. Especially on these decks because they are a thin stamp. They will rust quickly and you will be patching holes. They are great tractors for homeowners if you find one in good shape. Generally easy to work on and get parts for. I have the 38" and 42" version of these machines and they do great for me. Thanks for your comment! ☺

@markduvall5918 Год назад

I just bought a 99 Murray 12.5 HP 40' cut and all it needs is a belt .. thank you

@bigalsmallengines Год назад

They are simple great mowers. You will like it. -Cheers 🍻 -Al

@DarylArchideld 4 месяца назад

Thank you for this video. I’m not mechanically inclined at all but I was able to replace a broken belt and save some money on a repair bill.

@bigalsmallengines 4 месяца назад

You are welcome! Cheers! 🍻

@DouglasHardin-nr7nm 5 месяцев назад

Don't ever get those back ones mixed up on how they go back on

@DouglasHardin-nr7nm 5 месяцев назад

Like I said while ago I don't know if it's firing or the gas problem when the mower turns over but it will not crank

@JamesRobinson-z5l Год назад

How to replace drive belt on a Murray riding mower?

@bigalsmallengines Год назад

If you look at the owner's manual it will tell you how. So far I haven't had to replace a drive belt on either of my Murray mowers yet. I know it's not easy. If I ever get the opportunity to change one, I will make a video. Cheers 🍻 -Al

@inherentmirth5180 11 месяцев назад

"Be strait"??? So I should be a narrow body of water when I perform this repair?

@bigalsmallengines 11 месяцев назад

Exactly! You got it! Cheers! 🍻

@DouglasHardin-nr7nm 5 месяцев назад

You can level your deck all the way down like that to right

@bigalsmallengines 5 месяцев назад

Not sure what you mean... there are two knobs in the back you can adjust for the angle, you may want to experiment with getting your best cut. Mine seems to do best with some slight angle to it. 🍻

@DouglasHardin-nr7nm 5 месяцев назад

Well mine is a murray 14.5 40"

@cindynapoli7530 2 месяца назад

Help did everything but did something wrong and im clueless. Belt engages when I turn on mower. The handle to engage does nothing can you tell me what I did wrong

@bigalsmallengines 2 месяца назад

Either you got the belt routed incorrectly or make sure you got the belt within those guides around the engine pulley. Check those two things first. The belt may be the wrong size? It should be loose around the engine pulley till you enguage the deck.

@cindynapoli7530 Месяц назад

Local tractor repair man told me I need authentic murry oem belt. Can you tell me where to order that? I had bought a belt correct size at hardware store. I see them on Amazon but are these authentic?

@cindynapoli7530 Месяц назад

My tractor model # is without the a 425001x8

@bigalsmallengines Месяц назад

@@cindynapoli7530 Repair clinic dot com has the Genuine OEM part #37X88MA. Their # for the part is 1668656. It is around $35 usd. Don't know why yours don't have the "A" Prefix in the number. Mine is referred to on the tractor and my owner's manual with that prefix. Maybe it has to do with where it was sold? Would not think that would make a belt size difference though. Cheers! 😃🍻

@DouglasHardin-nr7nm 5 месяцев назад

Mine turn over sometimes but it want crank what is the problem

@DouglasHardin-nr7nm 5 месяцев назад

That's the answer to my problem

@DouglasHardin-nr7nm 5 месяцев назад

Ok you must not of gave it yet

@bigalsmallengines 5 месяцев назад

You may want to check the carburetor. Check that electrically operated fuel shut off valve on the bottom of the carburetor and make sure when you turn the key, the plunger moves in and out. You can hear it click when you turn the key if you listen, If that is defective, it will not have any fuel flow. Make sure you have no clogged fuel lines or air cleaner. Check for spark. Could be any of those issues.

@kajlerdog628 Год назад

What is the exact deck belt size?

@bigalsmallengines Год назад

1/2"X89" (Part # 037X88MA)

@rehmankhalid4037 Год назад

My deck belt keeps slipping off. Do you have any suggestions to resolve that issue?

@bigalsmallengines Год назад

With your pulleys tightened down, check for slop or play in them. Make sure they are in good condition and have no wear that would not hold the belt. Also make sure you have the correct belt size. Check and grease your mower spindles. Make sure the deck is properly lubricated and nothing is binding. Basically check for anything loose or worn out. I hope this helps you. -Al

@rehmankhalid4037 Год назад

@@bigalsmallengines thank you

@bigalsmallengines Год назад

@@rehmankhalid4037 You are welcome. Cheers! 🍻 -Al

@ams3894 10 месяцев назад

@@bigalsmallengines My deck belt loosened up too. When I engaged the blade, it is ok. But once I disengaged, the belt came out of the pulleys. I have to push back the belt before the next mowing. The belt is thin and some stuff chipped out. Will the new belt help? Can I use WD 40 to lubricate? Mine is 2004 model [425615x78A] and it looks almost the same as yours, but mine has no wheels on the mower blades. Regards,

@bigalsmallengines 9 месяцев назад

@@ams3894 Sounds to me like you either have a severe worn belt or not the right one. Yeah I would certainly get a new belt and make sure it's the right # for your model. I never have the problem of it falling off the deck like that. You should use a little 3 In 1 or 30 W oil around the pulleys and use a grease gun to lubricate the blade spindles. I would not use WD-40 on a mower deck. Hope that helps you out. -Al