Must-Have 3D Printed Accessories! for The Bambu Lab A1

Подписаться 706

Просмотров 54 тыс.

50% 1

This video details an essential upgrade that all Bambu Lab A1 owners should install right away! It's vital to the health of their machine and to personal safety. Aside from that one essential print, this list features many must-have accessories that can improve the A1 user experience.
⚠️Due to the recent callback, please take the necessary precautions by inspecting your A1 heatbed cable for damage as soon as possible. If your cable is damaged then 🛑stop using your machine and reach out to Bambu Lab for support. If not, still make sure that you print and install the heatbed cable protector to prevent damage in the future. Keep you and your loved ones safe!
🔗Link to Bambu Lab Blog Article :
"A1 Heatbed Cable Callback" - blog.bambulab.com/a1-heatbed-...
🖨️3D Print Links:
A1 Heatbed Cable Protector: makerworld.com/en/models/1588...
A1 Purge Management System: makerworld.com/en/models/9176...
Bambu Scraper Grip: makerworld.com/en/models/1270...
Small A1 Series Accessory Box: makerworld.com/en/models/9788...
A1 Build Plate Aligner: makerworld.com/en/models/1090...
Bambu Build Plate Caddy: makerworld.com/en/models/7580...
A1 AMS Lite PTFE Removal Tool: makerworld.com/en/models/1035...
Sunlu AMS Lite Spool Adapter: makerworld.com/en/models/4243...
AMS lite Top Mount for the A1: makerworld.com/en/models/9248...
A1 Top-Mount Extension Arm for Spool Holder: makerworld.com/en/models/1465...
🛒Shop (Affiliate Links):
Bambu Lab A1: us.store.bambulab.com/product...
Bambu Lab A1 Mini: us.store.bambulab.com/product...
Bambu Lab P1S: us.store.bambulab.com/product...
Bambu Lab X1 Carbon: us.store.bambulab.com/product...
Overture White PLA Filament: a.co/d/0NJCuXB
Sunlu White PLA Filament: a.co/d/cu8wVyE
Check out my Etsy Store➡️ etsy.com/ca/shop/Creatorrific
Check out my socials ⬇️
Tik Tok: / creatorrific
Facebook: profile.php?id=6...
Instagram: / creatorrific
📖Chapters:
0:00 Intro
0:53 A1 Heatbed Cable Callback Details & Heatbed Cable Protector
4:12 A1 Purge Management System
5:19 Bambu Lab Scraper Grip
5:53 Small A1 Series Accessory Box
6:24 A1 Build Plate Aligner
6:48 Bambu Build Plate Holder
7:23 A1 AMS Lite PTFE Removal Tool
8:34 Sunlu AMS Lite Spool Adapter
9:05 AMS Lite Top Mount for the A1
12:34 A1 Top-Mount Extension Arm for Spool Holder
13:11 Concluding Remarks
#creatorrific #3dprinting #bambulab

Наука

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 95

@Creatorrific 4 месяца назад

🚨ATTENTION🚨 There's been an official update from Bambu Lab for the A1 heatbed cable call back since this video was released. Please disregard the information on the first accessory that I mentioned. Bambu Lab has escalated the matter and they're saying that ALL OWNERS SHOULD STOP USING THIER A1s IMMEDIATELY. There are 2 options available to move forward. Option 1 - return/refund the A1 and receive a $80 credit in addition. Or Option 2 - wait until the end of March for Bambu Lab to send replacement parts and receive a $120 credit in addition. Read their updated blog article here 👉blog.bambulab.com/a1-recall-update/ I'll create a follow-up video shortly that goes into detail.

@sotm6078 Месяц назад

For most that cable is NOT an issue. Bambu is just covering their backsides by doing the recall. That cable guard would work forever.

@sotm6078 Месяц назад

BTW Bambu is NOT providing a cable replacement. They are proiding a complete heated Bed replacement. I just recieved and installed mine. Easy peezy with thier instructions.

@phoenixcooper486 Месяц назад

Yo have they fixed this yet for the UK

@Splarkszter 11 дней назад

Oh, that's good. I congrat Bambulab for doing the right thing.

@Darthtaterize 2 дня назад

Thanks, this is one of the few, printed accessories videos, that was truly helpful, and not just go buy this go buy that. Thanks.

@morgaj21 7 дней назад

Just ordered an A1 - looks like I have the first set of projects to print! Thank you, very helpful and well produced video.

@moodykido2129 16 дней назад

Your suggested printings are good. The overall video is good, will watch more of your videos.

@Creatorrific 15 дней назад

Thanks for the support!

@stevenpalm9484 2 месяца назад

Thanks for sharing, this is a great assortment of upgrades!

@Creatorrific 2 месяца назад

Thanks for watching! I appreciate the comment.

@boiledtea479 4 месяца назад

DAMN your so underrated! if i had only seen the video i wouldve thought you have 200k+ subs! Your video is just sucha high quality one! simple yet cool designed moving elements, nice voiceover, and good clips. perfect video theres nothing bad about it.

@Creatorrific 4 месяца назад

🙏 Thank you so much. I appreciate your kind words. Thanks for watching and for the support!

@jungofett Месяц назад

Even if you dont have an AMS lite the Z brackets make the printer much more rigid and id highly recommned it.

@Creatorrific Месяц назад

Agreed. Thanks for watching!

@S.A.S.H. 25 дней назад

"my plant's happy..." Nice touch, that. I need to find an X1-C version of that Accessories box.

@Creatorrific 15 дней назад

😄 Thanks for watching. The X1C's a really nice 3d printer.

@ryeevo 22 дня назад

Just baught this setup for my first printer. Ill be coming back to make these. Nice video production too

@Creatorrific 15 дней назад

Thanks for watching. Hope you're enjoying your new printer.

@HoopCrave 4 месяца назад

Very to the point.. Love it!

@Creatorrific 4 месяца назад

Thanks for watching!

@jojomondo5822 Месяц назад

This is the future. I just bought one a few days ago. It’s coming in. I haven’t looked up any news if they happen to solve them, but I’ll be printing these just to be sure.

@Creatorrific Месяц назад

That's great! Your new order should arrive ready to go with the heat bed problem fixed. Hope you enjoy it!

@GizmoDeVoe Месяц назад

Great list of accessories. Love the video. Thanks!

@Creatorrific Месяц назад

Thanks for supporting!

@GizmoDeVoe Месяц назад

@@Creatorrific So I did notice that when I tried to use the build plate aligner that I'm not getting "nozzle is covered with filaments" errors because it looks like it checks for filament in the upper left AND upper right corner. Great idea but it looks like the new firmware may cause some issues. Beat my head against this issue for HOURS before realizing what might be causing it.

@chazhaze1580 Месяц назад

I just ordered mine yesterday, hoping to get it soon to compliment my behemoth Anycubic Kobra 2 Max! It makes awesome huge pieces like helmets and supports/shelving/organizers, and does decently well on smaller items but now i will have this for higher detailed, multicolored projects

@Creatorrific Месяц назад

That's a nice combination. Hope you enjoy the new 3d printer!

@eaojnr Месяц назад

Great video. Very helpful. I was always procrastinating because of the footprint of the printer, but the guide on getting the AMS on the printer bridge was really what got me eventually to make the buy. Thanks

@Creatorrific Месяц назад

Thanks for the support! Glad I could help you reach a decision. Hope you enjoy the printer.

@Ashmodai 6 дней назад

Got my A1 last week. The top mount screws were actually already included and the cable thingy has been fixed!

@directedt3ch 4 месяца назад

Excellent video! You'll go far on this platform. Well done.

@Creatorrific 4 месяца назад

Thanks a lot for your support!

@MrSerbeus 4 месяца назад

great list! very well done video

@Creatorrific 4 месяца назад

Thanks for watching! Glad you liked it.

@roselynfacey1253 4 месяца назад

Creatorrific: good job taking the time sharing. some of ur ideas with us.

@Creatorrific 4 месяца назад

Thanks for the support!

@BestICan Месяц назад

Great video!

@Creatorrific Месяц назад

Thanks a lot! I'm glad you enjoyed it.

@Immolate62 4 месяца назад

I find the scraper to be a bit too scrapy for textured PEI plates. In my experience, the best tool for the job is a scraper made for an oscillating multitool. Spend the money to get a good one and it should be good right from the package. If you cheap out, make sure you take the time to remove the burr from the scraper before use. Either way, these never fail me.

@Creatorrific 4 месяца назад

Thanks, I might give that a try. You're right, the metal blades are probably best for the smooth plates.

@kennethpulliam5031 3 дня назад

About how tall is this printer with the top mounted AMS? I'm considering this model but I'm working with limited space.

@havocproltd 8 дней назад

Nice work, sir!

@Creatorrific 7 дней назад

Much appreciated. Thanks for watching!

@sundance2005 Месяц назад

Great video. I like that top mount. Most in the past do not have the stiffeners and the A1 is top heavy the the top mount AMS, this solves that problem. I didn't have any problem aligning the build plate with my pre-recall A1 but seem to with it's replacement I just got. Not sure it's it's the new printer or what. If they would remove or move forward the rear magnets on the heat bed I thing it would solve this problem or make the stops on the back of the heat bed bigger/taller. While I like my BBL A1 regretfully "getting back to you quickly" (14.32) is not a something BBL apparently can do. Their support is some of the worst I have ever seen.

@Tommasta 4 месяца назад

The Callback has been changed to a full recall, FYI.

@BennyTygohome 4 месяца назад

Very nice selections. I have most of those printed. The newest a1 firmware has bed detection and sometimes had issues with the bed plate corner aligner, so I'd exclude they one. Great video, thanks. And I'm keeping my a1, it's just so good. I've purchased an a1 mini while i wait for the revised a1 heatbed.

@Creatorrific 4 месяца назад

Thanks for the info! I'm going to keep my A1 as well, but I'm deciding between the A1 Mini or the Anycubic Kobra 2 Pro as a replacement in the meantime.

@kevinhenry61 4 месяца назад

Had the same issue with mine since the update. Took a while to figure it out but then saw that the corner aligner was melted where the tip was touching it. Keeping my A1 as well. Nice machines and no issues. I've got my ticket in and will wait for new heat bed to arrive. Thinking of getting a P or X series in the meantime.

@timcaldwell8154 3 месяца назад

There is an updated corner locator for the new firmware which fixes this issue

@44josh 4 месяца назад

the build plate alligner is now obsolete since the latest update. it now puts the hot nozzle over in the top right hand corner on the 2nd layer and it melts and collects the clip haha

@Creatorrific 4 месяца назад

Oh shoot, that's not good. Thanks for the info!

@patrickluisi1600 4 месяца назад

I wanted to tell you what an awesome video this was! very professional, extremely informational and well put together! It's a very classy touch that you give links to all the things that you spoke about through the video. I also have an A1 purchased in December set it up after Christmas and after a slight adjustment to the heat bed it has worked awesome. My cable to the heat bed shows no sign of fatigue although I'm holding off using it and I am NOT returning it!I had considered buying an X1 Carbon but I'm holding off on that too to see how well they pull off the repair of this very nice little machine. Thanks again for the great video! P@t

@Creatorrific 3 месяца назад

Thanks a lot for your support P@t! I'm glad you enjoyed the video. Hopefully, we can get back to fully enjoying this machine in a few weeks when Bambu Lab ships those replacement heat beds.

@cuhhwetes 26 дней назад

Very nice video.

@Creatorrific 15 дней назад

Thanks for watching. I appreciate the support.

@Gabriel.-_-. День назад

What about building a support for the top-mount extension AMS to the back wall for stability? Good or bad idea?

@nolookjones Месяц назад

the buildplate aligner mod you covered gives my a1 an error message (and others on Reddit too)

@GeneralRasp 4 месяца назад

Great video and excellent tutorial on the AMS bracket. Have you come across a good solution for keeping the filament dry while on the AMS lite?

@Creatorrific 4 месяца назад

Thanks! I haven't found a solution while it's on the AMS Lite, but the Sunlu S4 filament dryer fits 4 spools - perfeft match. I''m going to grab one of those and I'll just dry filament in there before loading using the AMS.

@whitejackie1 3 месяца назад

What is interesting about this damaged cable thing with Bambu Lab A1 I just watched aurora tech review on the printer.. and you could see, that their printers cable was damaged, just like in the example image from bambu lab

@cjs_hobbies 4 месяца назад

After recall I would add the A1 Heatbed Cable Chain by dalelovelace and the Bambu Hubcap - AMS Lite Rotary Spool Lock by SThane all are on Maker World.

@Creatorrific 4 месяца назад

Thanks for the suggestions! I'll check those out.

@MattHealey. 24 дня назад

What padding is that at the top and bottom? Guess to stop twisting

@rokzavrl8411 Месяц назад

Good thing is i got this printer yesterday and that was first thing i checked and it was already fixed with a mesh tube if you call it that way

@Creatorrific Месяц назад

Nice! Great that you don't have to deal with that issue. Thanks for watching.

@Living-gnu-64 5 дней назад

my A1 just came a week ago and has a different cable

@riba2233 4 месяца назад

another great video, thanks :) tbh I am not sure if you need any other build plates, from what I have read provided textured PEI should be the best in every regard, at least out of ones bambu sells.

@Creatorrific 4 месяца назад

Thanks! I love the textured PEI plate also. It's a nice finish for the bottom of prints but if the print's orientated on its side, I prefer a smooth finish to match the other side. Otherwise textured PEI plate all the way!

@riba2233 4 месяца назад

@@Creatorrific yeah that makes sense, thanks :)

@moonstarr0 11 дней назад

Just ordered my A1 combo today. I’m going to start printing these models before it gets here. 😊

@user-ex8zo1vj3r 9 дней назад

great video, thanks i think there is a problem design of A1 Top-Mount Extension Arm for Spool Holder

@user-ex8zo1vj3r 9 дней назад

with lasts layers, empty spaces

@Creatorrific 7 дней назад

Thanks for the support!

@audioman81 Месяц назад

The shitty tubing fittings should have been recalled from the start. Biggest gripe. Ive neber in my life had such a hard time removing tubing and I deal with push connect air fittings almost daily at work.

@David-ty6my 22 дня назад

I also bought the screws for 2$ with my A1, but it looks like in the accessories there are also the screws now, so this is only for people who have already ordered their printer and want to upgrade. Its just 2$ wasted for me so im fine.

@Dmvfunny 25 дней назад

I ordered mine yesterday. So this issue has not been resolved for cable damage? I mean i m worried already now after looking this.

@Creatorrific 15 дней назад

Sorry for the late response but by now you've probably that you're fine. The printers sold at the time when you purchased and going forward are fixed.

@nikodelpapa Месяц назад

Does the Top Mount affect the vibration while printing a lot?

@Creatorrific Месяц назад

I haven't found that to be the case at all.

@jessicaalvis7063 7 дней назад

What filament did you use to print the top mount? Can you use standard pla?

@Creatorrific 7 дней назад

I believe that I used Sunlu standard PLA. It's plenty rigid and secure. Hope that helped!

@jessicaalvis7063 6 дней назад

@@Creatorrific I just pullede the trigger on the A1 combo :D I am so freaking excited :D

@drewg1981 Месяц назад

30 bucks on amazon... a quad holder and 3 bowden tubes later and i don't need an ams.... btw its only there to tell the printer what you are using for filament...

@minemusicplays 22 дня назад

How did you do this I am very curious

@sotm6078 Месяц назад

The hot bed cable protector is NOT a nessary thing since Bambu has done a recall to replace the heated Beds!!!!!

@C00lestNerd 3 месяца назад

Can you print tpu on the A1?

@Creatorrific 3 месяца назад

Hey, thanks for watching! You can definitely print TPU using the A1.

@Killswitch1411 4 месяца назад

May want to reupload this as they dony want you using the A1 at all now and total recall. So that information old in the video and could be confusing.

@nutzy99ify 21 день назад

Well thats silly. Thank goodness for the camera because i dont want my stuff tk burn. My childrens drawsing and photos are ao important. Whybdoesnt bambu actually make a real fix....

@ultrabeamitaly1 2 месяца назад

È un grave errore mettere tutto quel peso in cima all'albergo, le vibrazioni e il peso eccessivo dell'intero sistema AMS introducono ulteriori flessioni alla struttura dell'asse Z cosa per cui non è progettata, questo set-up non ha alcun senso