Must watch before using a gas tank sealer! 

I have used this product many times, and i can say it is a top product. i did one tank 10 years ago and it is still perfect.

Tip for anyone else watching, my tank has a port on the bottom with threads on the outside that the tillotson fuel filter screws onto. I drilled a hole into a wine cork and threaded it on to plug that hole. It worked great. My gas caps were vented so i ductaped the hole. A big plug would be ideal but my paint is going to be redone anyway, i wasnt too concerned about damaging the current paint

Very good video. Love the sight glass mod as well. Thanks for sharing. 👍👏👍👏

Thanks a ton for your video. I actually bought a spare tank for my vintage cushman because the previous sealer in my original tank was cracked and failing. It was the white stuff. I started with the degreaser on that one and it didnt touch the old sealer so i put a gallon of acetone in it overnight. That disolved it. Then i went to the degreaser. For the spare tank, it was dirty inside. I started with white vinegar and some nuts for aggregate and shook it all about. Then i moved onto the degreaser. Poured the metal prep from one tank to the other after soaking all sides and then drained it back into the og bottle when both tanks were done. Both are now rinsed and bone dry ready to do the paint step in the morning. Im really glad i had a heat gun, as the shape of my tank leaves some liquid in there. Anyway, thanks for the step by step. Both these tanks needed it. Surprisingly, the less rusty one is more solid than the other one that had a pinhole. I kept losing any gas i put in overnight.

Thanks that was great video, it helps me on my older cars that fuel tanks are hard to find in good shape if needed. At least this process do the trick on pin holes if any and stop any from accruing.

I needed this video! 🙏

great video, about to de-rust a tank and I wasnt sure if this was worth using. now Im definitely doing this.

I've gone through this process several times recently and it's quite tedious. It takes time and care. I'm sure that neighbors are wondering why I've been holding and spinning fuel tanks for hours on end while walking around the yard

Great instruction, thanks

Never tryed this brand but Red kote works great for me Might try it next

Cool!

The black rust paint is a disaster in a can. The tank liner works great, prep is key.

The product I have used for 30 years is 3M EC-776. expensive and aircraft safe.

I am compelled to wonder, is there any value in masking off the gas cap to prevent the product from interfering with the dynamics of a ventilated/breathing gas cap? Maybe use a sacrificial gas cap for the application process? Anyway, this was a well done and useful tutorial and the gratitude is flowing! Thank You, Brother!

I just noticed POR is a 10 min drive from me. They seem to have a customer store on site. I'm off in the morning to ask for their advice.

Great video!! One question..... Does it smell alot? or can I do this in my basement shop??

I welded & POR coated my tank about 3 years ago bc of a tiny leak and haven't re attached it to the bike yet. Im thinking of giving it a 2nd coat now before I put it back together. Yea or nay?

I'm wanting to use it on a 1957 moped. I'm fearful that the material will reduce the inner diameter of my petcock so that I want be able to get the petcock and it's stems back in the tank. The untreated inner diameter is probably about 1/2". What are your thoughts?

Did your kit come with the repair cloth for larger holes? I definitely dont need that, I wonder if buying the degreaser, rust stopper, and sealer seperate is cheaper.

Thankyou. I'm told that red coat stuff is horrendous. This product coupled with your abilities & performance looks great. Clean efficient result

Thanks for sharing. Do you think this seals small leaks?

Can you use muriatic acid and rubbing alcohol to prep the tank?

How is it holding up after a year? Got a tank that I need to coat and looking for a long lasting product.

Would u recommend coating a brand new ebay gas tank has never had any fuel or anything in it

what if there is bits of loose rust in the tank, how do you get that out before putting the degrease in

How much time did you spend on the final step before letting it sit to drain out? The kit's instructions did not say

Another question. I used a different sealer in a tank once, it flaked up after 10 years. How can I get it out?????? There is rust under that white sealer.

if the fuel tank takes a hard hit, it can damage the insulating layer(sealer layer), which can lead to other damage to the carburetor? Is that correct or not?

Not sure putting it out in the sun is the best way to go. I'd just leave it in the garage and wait the 4 days. Beware, when you think you've drained it all, there's still more to get out. If you think you're done and leave it sitting at a slight angle, you'll come back to find some POR pooled up in the tank, which isn't good. Set it in a position where the excess will spread out and not pool in a crevice.

So how did it hold up a year later?

AMIGO COMO TE FUE 1 AÑO DESPUES?

Should I rinse out with water and degreaser a virgin tank?

Whats it doing after 10 to 15 years?????

What is the brand?

Thanks for a fucking cool video!

Por is made by Eastwood

Not leaking..yet just rusty

Only a year old and 480p lmao

Just so you know , looong lead-ins are STUPID . Get to the damned video ! Thanx