My 8 Favorite Tools and Tips in LightBurn

Подписаться 31 тыс.

Просмотров 14 тыс.

50% 1

In this video I go through my 8 favorite tools and tips in LightBurn. Some I’ve covered before and will put links to the full video in this description. All of these tools and tips will increase your productivity in LightBurn. I hope you enjoy my content.
Note: I mention at the start of the video there would be 9 tip but had an issue with some video so there is 8 tips listed.
Art Library: • LIghtBurns Art Library
Material Library: • Generating Materials L...
Fill with color: • Color Your Designs in ...
Making Jigs: • Making laser jigs the ...
1:13 Art Library
3:33 Material Library
6:29 Arrange Long tool bar
8:22 Validating your estimated run times
11:41 Filling your designs with COLOR
15:32 Generating QR Codes
17:19 Position laser head(Great for jigs)
19:17 Reverse mouse wheel direction

Кино

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@dereksummers8598 2 года назад

I watched this video a long time ago and did not "like" it. Then I spent over an hour this morning looking for this particular video so that I could remember how to read the speed settings from the controller (add that to the title, it is WIDELY searched). Then my preview time changed from 1 1/2 hours to 3 hours. Needless to say I "like"d the video this time. Thank you for sharing. Like this video and save hours, literally

@computercreationz 2 года назад

glad the video was finally helpful for you. appreciate the honest input and tip.

@donaldwalls8568 2 года назад

Nice demonstration and explanation as usual. Thank you

@computercreationz 2 года назад

Glad you liked it! Thank you for watching!

@TheDesertraptor 2 года назад

Lots of good tips. Mouse was one of the first things I went looking for when I got LB. Material Library I just found recently. Thanks

@computercreationz 2 года назад

I love the library’s they have. they help allot! Thanks for watching

@marcieglanzer5023 Год назад

Thanks for another easy to follow video… your explanations are simple and helpful! I’m interested in your follow up on fill + line…great job 🙂

@computercreationz Год назад

thank you it will be in in a week or two.

@JoHunter 2 года назад

I never knew about the fill/wireframe thing! Thanks for that, and for the reminder about QR codes which I do really need to play with.

@computercreationz 2 года назад

I use both quite a bit, give it a try. thanks Jo!

@charlesdeshler202 2 года назад

Great information... I need to get going on those art and material libraries...

@computercreationz 2 года назад

It will make a difference later

@davegirimonte9945 2 года назад

I have to tell you this video is Awesome with the tips that I learned I watched your other video about other tips and that changed my game thank you so much for your time

@computercreationz 2 года назад

Awesome! Thank you!

@barryfriesen8062 2 года назад

Great stuff as usual. Keep it up.

@computercreationz 2 года назад

Thanks, will do!

@suzannefoster4923 2 года назад

Thanks for the great content!

@computercreationz 2 года назад

Glad you enjoy it! thanks for watching!

@rjlatheart 2 года назад

Great Job thanks for sharing good stuff

@computercreationz 2 года назад

Thanks for watching!

@patriciaparker4125 2 года назад

I like your substance in your videos. I am looking for an option to start my own business, yet be mobile. I want to start with a small engraver to do flat surfaces and work toward cylinder surfaces. I like watching you and what you have learned. It will help me. I plan on starting small in 2022, working it up to my retirement in 4 yrs. Then leave my employer as my business should be self-sustaining.

@computercreationz 2 года назад

I started with a diode laser and quickly moved to a co2 laser. there is so many things you can do with these machines. good luck with your plan. Find what you enjoy making and you will be successful.

@Bojammer 2 года назад

Very usefull thanks

@computercreationz 2 года назад

you are Welcome 😊

@WhatIsKenDoing 2 года назад

excellent video. thank you

@computercreationz 2 года назад

You are welcome!

@squidskunk 2 года назад

great info...thank you.... i wish your lightburn videos were all in one play list...be easier to find and watch then.

@computercreationz 2 года назад

Great suggestion!

@RSP13 Год назад

Amazing

@computercreationz Год назад

thank you!

@thesquirrel905 2 года назад

So glad I found your channel. I ordered a Thunder Lazer Nova 51-130w and can’t wait till it arrives. So I have been watching all your videos so I’ll be a little ahead when it arrives. My question is what kind of computer or lap top do I need or can I use an iPad and do I need Internet 100% all the time to make it work. I live in the country and we lose Internet a lot out here.

@computercreationz 2 года назад

LightBurn doesn’t work on an iPad so you will need a computer pc or Mac. there seem to be less issues with a pc. you can work 100% offline. you do not need the internet in any way to operate your Thunder laser and LightBurn..

@thesquirrel905 2 года назад

@@computercreationz awesome thanks for the reply!! Helped a lot. Now I know what to get!

@yvettereynolds5945 2 года назад

Wow ,,QR CODE , THis software is amazing,

@computercreationz 2 года назад

yes! they are very handy!

@Hellotube1 2 года назад

Nice tutorial

@Hellotube1 2 года назад

Make a tutorial of full image process please

@computercreationz 2 года назад

Thanks for your comment, I appreciate you watching

@omfd100 2 года назад

Hi mate do you have a video on ways to make a jig I seen you did one at start of video would like to know how to do one of them?

@computercreationz 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kfhS7Rnv_u8.html

@seagnatprepper9613 2 года назад

Robert .... thanks for all you do ............... I've tried several times to leave a few bucks to and for some reason it doesn't seem to let me finish. Any Suggestions?

@computercreationz 2 года назад

Sorry to hear that, and thank you for trying to donate. are you signed in to your account on RU-vid. if not that may be the problem. I haven’t had anyone indicate issues like this. I will check this out further. thanks again for watching

@seagnatprepper9613 2 года назад

@@computercreationz yes .. youtube is signed in. .. it keeps telling me the info i've entered for my payment is not correct ... but it is .. and there is more than enough money in it to cover what im trying to do ...

@Warbaman 2 года назад

Can we address this is the first time in my life ive seen someone using their forefinger to scroll a mousewheel?! On a serious note though, one or two of those tips are gonna help me a lot, kudos.

@computercreationz 2 года назад

lol, drives me nuts to use my middle finger. although I would like to sometimes ! thank for watching!

@kassandrasexton9278 2 года назад

I work on Lightburn from 2 computers (design on my desktop and burn from my laptop). How do I share ALL my designs from both?

@computercreationz 2 года назад

use something like Google drive or other file sharing app.

@kassandrasexton9278 2 года назад

@@computercreationz Thank you! Also, I have been getting movement lines when I am cutting or engraving. How do I stop that from happening?

@lpaltageek 21 день назад

When you operate from controller to you still put files in art library?

@computercreationz 21 день назад

The art library is designed to be used as you design before you send to the controller

@lpaltageek 20 дней назад

@@computercreationz Thanks to you I have developed an Art Library where I store all my Lightburn files that I don't want to lose. It will not take me long to reach the memory capacity in the controller and I have to delete files. Should I still save them as Lightburn files and store in the Art Library?

@mr.jenejohnson4471 Год назад

At the end of the video. You were showing zoom in zoom out. How do you reset the grid back to normal? Thank you

@computercreationz Год назад

Just use the middle scroll wheel to place it where you want it. There is no reset. Thats all best done with your middle mouse wheel! Thanks for the questions