Your first Acrylic Project in LightBurn ( Good Beginner project) 

Years after posting and it's still relevant today. Helped me learn a great deal. Thank you

Thank you for a wonderful tutorial. As a beginner it was super helpful. You are a great instructor.

The single most directly useful video I've ever found online. Thank you.

Love this video. Thank you so much! I just got a laser and I have been figuring it out. This gives me a great project to try out.

Great video, I appreciate the detailed explanation of how it works and how to do it. I can hardly wait for my laser to arrive so I can test it out.

i have watched your videos several times, and always find a new and usefull tips & details. thxs for the time and dedication without a doubt your explanations are the best and most detailed for newbies like me.

This is a great how-to guide, thank you !

Great tutorial! You have really helped me to learn lightburn…I so appreciate it! I’m not sure why you are not at a million subscribers yet!!! Your videos are so informative!

Your video's are really informative. This is a really good video showing how to work LIGHTBURN. Thanks from a beginner. I just got mine, a 5.5 watt, in late aug 2021.

love your video you really know your stuff well done mate

I am just starting in this wonderful world of laser and your videos have been a school and inspiration to get me into doing more things, I have a small diode laser but already in plans to acquire a CO2 laser soon. Thank you very much for your explanatory videos, Always aware of the following

It's clear, clean and precise, and, even if I'm French, I understand everything! Well done and thank you!

You are the best!!! This was our first project with a CO2 laser and it turned out great, thanks to your video instructions.

Thanks for an excellent video!

I love your videos. They have helped me so much!! Thank you!

You really do a nice job, so many things right, like not moving the curser all over the place, thank you so much.

I really learned a lot from this! Thank you again!!!

GREAT Video!!!

Thank you for the very nice tutorial!

I'm sure glad I found your channel. I guess I'm one of those guys who bought a laser, thinking just turn it one and make stuff. You make it look so simple but the detail you give in exactly what Need. I bought a Longer Ray5 10 watt set up and made a few hold down clips and burned a few holes in stuff🤣. Thank you so much for sharing your knowledge.

What a great video , thank you

I always look forward to watching your tutorials, as soon as I get a notification, and this tutorial was absolutely brilliant. When I first saw it all, I thought, it was going to be so difficult, but the way you break it down and talk us through it, you seem to simplify it in such a way, I can follow what you are doing perfectly. Also, the way you explain what you are doing is extremely helpful to me, as it ensures I understand the reasons behind what you are doing at each point in the process. I have a couple of questions if you dont mind? 1. What exactly is the tool layer, and how do you create this - what makes it different to any other layer please? 2. You mention inlays with acrylic, it would be great is you would do a tutorial on doing this kind of thing, as it would be another learning for me to put to good use if that was ok with you? Again , so grateful for the time and effort you put into your tutorials , I really do appreciate it and built on my toolset for when my laser arrives soon... so excited Terry

Really like your videos great work keep them coming and in the same layman's terms is great thanks for all your time and effort 👍

Great video. Thanks

just starting out thanks , really helps

First time viewer and would just like to say a huge thankyou for making learning how to use Lightburn for easier than anyone else I've seen! Obviously I'm not going to remember it all but I know where to come for tips n tricks!! Subscribed!! 😁

Thanks for another great video! I’m really looking forward to using acrylic! Questions: 1. Any special grit sandpaper you prefer when gently taking down the edges? 2. Let’s just say there was a small flame up when cutting, what do you do exactly? do you immediately stop the machine, whip open the hood and spray with a little water bottle?

Thank you so much… I learned a lot.

That laser is awesome

This is such a fun project! I don't have a laser yet but now that I know I can make taco stands, I must make it happen! Husband is finally coming around to the general idea; my problem is still finding a space. I want a Thunder 63, I have room for a desktop laser. I don't want a desktop laser. I would take it over nothing, but I would really like a little more real estate to work with.

at 16:08 where you I to insert and D to delete , you can skip all that and just press T for Trim (when in node edit mode) and it will take away the circle to the intersections, i found this out the other day and it really saves a lot of time :D great video thank you

I love the green tint acrylic. I want to make some of these but dont think they will look as classy clear.

Thanks again!!

thank you sir,

Thought of my other question :) Regarding using low air, do you just turn off the “air assist” in your layers setting to use “low air”? Any tips on how to turn the dials to the right amount? (Maybe so you just barely feel the air on your finger during a test?)

From where do you buy your extruded and cast acrylic? Are there any "brands" that are less smelly (or toxic?) than others? If you use glue to put pieces together, what kind do you use? Very helpful video - thanks!

Hi, i have the 35 100 ive been having problems with my air settings would you mind sharing the psi you use to cut your acrylic. Ive been waisting so much material trying to dial it in and have failed, i do have the digital pressure gauge similar to yours. Thanks for all the great content!

Hi. I am new to your channel and to Laser Cutting. Your tutorial on the Taco stand was very clear and very helpful, even for plywood work. I had great difficulties, though, with welding. I tried very hard to follow your example but had to struggle for hours to get a few welding points done. It was very difficult to get the "tongues" to attach well enough to a rectangle so that they will weld, even after strong zoom in. It may be a result of my not so good an eyesight. Would you have any advice on how to make a "welding worth" attachment at the first trial? Thanks Emanuel

Thanks!

Where did you get those pins to support the acrylic? I'm getting a nova 24 soon and look forward to cutting acrylic

Thank you for the content. I have just started to look into getting a laser printer and just came across your channel. I do woodworking and can see all kind of possibilities this would open for me. For someone with no experience with laser printing or graphic software would you say the learning curve is pretty high. I am just a little nervous that I may be getting a little over my head. Generally is there a lot of Time spent to set up each project?

Thanks. How exactly do you control air flow? Is that through your air assist?

what acceleration are you running on the engraving? looks so quick!

29:21 I don't have Honeycomb. I use slate under my material.

Hello, love your videos very informative. Do you have a video on editing a svg in Lightburn. I purchased the svg and of coarse I don't know how to edit. I am new to the Laser. Thanks .....Melissa

Amazing! How in the world did you learn all of this?

Great video but what software did you use?

Hello, I am new to laser engraver and just purchased an 80 watt Red & Black laser from eBay and after installing Lightburn my image looks correct in light burn but is lasering backward on the material, do you know what is causing this to happen?

My diode laser 5.5W is not cutting the transparent acrylic. Even with 8mm/min with 100% power at several passes. Can you suggest some settings?

hy is it possible to cut whit diode laser 10 or 20w ( tool D1)?

How do you get the engraving to loos so smooth. Mine has lines in it.

I have the same machine can you screen shot your air settings?

Is it possible to do this with a Ortur Laser Master 2 Pro?

Which laser machine do you use??

I love your videos. Do you sell this file?

Can you share details setting on Fill( engraving) like there are so many parameters I don't know what to choose

The machine you are using what would be the equivalent on eBay and would you suggest getting one off there or go for the expensive type like the nova 24…? Does the k60 move just as fast as that one you have or a similar speed?

Hallo sir,plss..3mm arcylic setting on sculpfun s6 pro ..plsss .it burn .plss help me sir.🙏