My biggest component (cnc milling) 

I wanted to show you that sometimes there is more work to be done with clamping and centering than with milling itself.

Krása, moc mě baví vaše videa, je to fakt nádhera, jsem rád že točíte a ukazujete lidem krásu našeho řemesla. Je krásný pohled dívat se na takového mistra oboru.

Требуем продолжения.

Very nice wall finish, looks great

Thank you for the subtitles!

very good job cncfrezar,,thanks for your time

very tight fitting. The only experience I have with CNC is the tolerance stackups I did while at Bosch. Small plastic parts. My studies were according to Alex Krulekowski's max/min work sheets. I enjoyed it for some reason. The parts I studied were very small engine components, the GPB motors to be exact. Radial studies mostly . For FMC Technologies, I found that the engineers were using the intranet GDT standards which were very very poorly defined. Which explained why when Shell oil received valve bodies from FMC , none of them were the same...out of tolerance all over because of poorly defined primary datums. The engineers didn't care for me much because their use of datums in no way matched the ASME standards.

Mostra mais video detalhando o uso do Manual Guide irmão! Deus abençoe, excelente profissional! 🇧🇷

Coooooolllll so much Chips in nice Blue! I love this!!!!!!

Good video, thanks a lot :) Did all these chips come from this operation?? And was there any vibration while machining the last passes of second tool? you know there were more material that rest from previous high feed tool? Have a nice day.

Nice job guys.

Hey mate. Nice job it just fits haha. I Hope you are All good down there. 👌

I run Cimatron and I love that gold cutter what is it ?

I like this work

Лютый станок!

Big part BIG money 😁

nice job .. more off this

I really wish my company put videos online of our work as I believe we don't have any NDA's but they think it won't be varied enough and it would lose interest quickly. I beg to differ, we do very similar work to you guys and its nearly always different, from tiny graphite electrodes to 10,000kg dies...

How can you be sure Z0 allignment it's ok?, How much of tolerance you can allow for this Holding block? Great job. By the way.

Привет! Долго пресс-форму выставляли? У вас нет функции в станке, выставить относительно 4 отверстий или выступов? Про Фанук не знаю,но на Сименсе есть такое. Иногда очень даже помогает.

why the cutter go up so high (Z axis ) after each path? for safety?

Proč při tom šlichtování pořád vyjíždí tak vysoko v tom zetku? Jinak supr krásná práce, to vyrovnání musel být porod

Hello 4:38 This brass tool adapter? why using for vibration??

God bless God for getting it onto the machine.

Nice work guys What brand of machine is this

How many hours ?

на нашем бы станке на таких режимах фреза для больших подач бы сдохла... впечатляет...

Your machine decelerates a lot when Machining. This is obviously ideal for tool and die finishing but surely this could be adjusted for roughing operations? There is bound to be substantial savings in Machining time on a large job. Love the videos 👌

A big moldbase.

Podobne veci vyrabam alebo repasujem u nas,ale na horizontke.Vy predsa mate tiez horizontku,alebo sa pletem?

Looks like a KAO MING Machine

При таком весе надо инерцию учитывать, нагрузка на ШВП бешеная.

Ap 0.75 why so small ap? You can use bigger head and lower your feedrate and spindle speed but you cane have bigger ap.

Leave it in the hands of GOD. Amazing comment. What is the brand of that mavhine?

setup take times .. new insert for the mold tools

3 d finish ball cutter

Aku merasa tidak asing melihat material yang anda kerjakan. Itu semacam, Fix Body dies/moulding? Betul?

На него тоже припуска по 4мм с каждой стороны?

Používáš chlazení vzduchem nebo vůbec nechladis?

Can you teach us in programming? Using the software? Thanks and appreciate alot

Na co byl ten rám určený? Lití hliníku?

I know mould work. I want a job.

Worst part is there is no where for chips to go😂

Die-Casting MOLD?

what country is your shop?

I know this works

4.2 tons.. you need to clamp it down? XD

Is that all?((

Sir this small we are manufacturing 1600 mm lenth 800 0 width here housing in india that firm name die tech India

Чехия?

No thank you

Align nie balance po anglicky.

на каком языке разговаривают ?