MY BMPCC 6K RIG | Camera Build

Подписаться 104 тыс.

Просмотров 166 тыс.

50% 1

In this video, I breakdown my Black Magic Pocket Cinema Camera 6K Rig. I also go over how this camera fits into my workflow and which tools I use for stabilization. Drop any questions or comments you have down below and I will try to get back to all of them!
Let's connect on Instagram: / edwardleefilms
BMPCC 6K Full Build List: kit.co/edwardleefilms/bmpcc-6...
BMPCC 6K: amzn.to/2WPIMd5
Sigma 18-35mm: amzn.to/3jKM9Me
Tilta Full Cage Basic Bundle: amzn.to/2D0970P
Tilta Full Cage: amzn.to/2WQNxDf
Tilta 15mm baseplate: amzn.to/2WQJQgG
Tilta Top Handle: amzn.to/2D1ZYF0
Tilta Side Focus Handle: amzn.to/32OcL8R
Tilta Nucleus Nano: amzn.to/2WUvZpM
Nano Hand Wheel Rod Mount: amzn.to/39mbtDt
Smallrig 12 inch rails: amzn.to/2Cz1Aq8
Indipro V-Mount Plate for BMPCC : amzn.to/3fZqj5d
Cool-lux Follow Focus Ring: amzn.to/30LPh1u
Smallrig Monitor Mount: amzn.to/3eUgWCv
SmallHD Focus: amzn.to/3eXHwdQ
Polarpro Basecamp Mattebox: amzn.to/32QpjfW
Breakthrough Step-up Ring: amzn.to/2CZLRjy
Rycote Shockmount: amzn.to/3fVE7xL
Powerextra NP-F970 Batteries: amzn.to/3hxcnj8
Comer 95Wh V Mount battery: amzn.to/2CyQotz
Samsung T5 SSD: amzn.to/2OOMRd5
Tilta USB C cable: amzn.to/2ZV4zll
Tilta HDMI 90 degree adapter: amzn.to/39nF2o4
Manfrotto 755XB: amzn.to/32PjgID
Manfrotto MVH500AH Fluid Head: amzn.to/2ZVQ9BF
Easyrig Minimax: amzn.to/32P3i0Z
Musicbed SyncID:
MB01TUQ4BXINF8I

Кино

Опубликовано:

23 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 290

@SimpleSandalsMedia 3 года назад

I saw the thumbnail, watched the video of my dream cam, enjoyed every second of the building of this INSANE rig and now I'm a subscriber! Thanks for this, young man.

@edwardleefilms 3 года назад

This is an awesome comment. Thanks for watching :)

@markprofeta3197 3 года назад

Love the minimalist lighting in the opening shot. Super clean and unique! 👌🏽

@edwardleefilms 3 года назад

Thanks Mark!

@jayalbajr 3 года назад

Dude this entire video was soo well shot and organized. Thank you brotha! Answered a few questions I had and have me a heading for my "compass" with my build.

@edwardleefilms 3 года назад

Sweet! Glad I could help! haha

@BdogMusic 3 года назад

Bro! I have been researching and RU-vid-ing (1 year +) to get the right rig! .... I watched you video and it was so clear that I just finished building my rig almost 1:1 and it is soooooo great. Sometimes I just set it up and look at it for hours, it looks like some serious Hollywood Spielberg stuff ...... Seriously, thank you for this great video and although all of the extra gear for my 6K put a nice dent in my wallet I am a happy camper now. Next piece of gear will be the Easyrig Minimax. Thanks Bro

@edwardleefilms 3 года назад

DUDE. Love this comment :) Thanks for sharing and so stoked for you! Wish you the best!

@nicocorteziberico9327 3 года назад

Will be adding some things to my rig shortly ! Thank you for the great video Edward!

@Notdinolove Год назад

Thank you for this! I'm excited to build my 6k now!

@joymae 3 года назад

Who else was so excited to see Edward upload a new video?! *its been a while!*

@edwardleefilms 3 года назад

It has been a FAT MINUTE. But got a lot of new videos in the pipeline :) Thanks for tuning in!

@vaulalexander1175 3 года назад

Excellent!!! Thank you for this gem!!!

@sergthemane 3 года назад

Love this rig! I always get confused watching other people's videos because I get lost trying to follow all the language used in rig building lol talking about quarter inch threads and other stuff. But this one was simple and easy-to-follow.

@edwardleefilms 3 года назад

So glad to hear that. Thanks for watching dude!

@IsThatYouSimon Год назад

Dude this set up is INSANE !

@OrdinaryDiaries 3 года назад

Great video! Thanks dude!

@cleanslateproductions9264 3 года назад

Awesome build!

@SageEpyon 3 года назад

subbed before this channel blows up. Top quality content

@edwardleefilms 3 года назад

Haha thanks so much! I appreciate it

@FlorisBos 3 года назад

Wooow, this is absolutely dope dude!!

@edwardleefilms 3 года назад

Thanks dude!! 🙏🏼🙏🏼

@DutchAussieProductions Год назад

Thanks for the video, Edward. That is a nice-looking rig. I like that Tilta side handle with the battery and SSD all in one. I might change my BMPCC 6K rig after seeing this one.

@collinausbury 2 года назад

Nice clean video man.

@roycox4415 2 года назад

Takes the pocket out of pocket cinema camera! Gorgeous rig.

@lancelascano5983 3 года назад

I dont have a bmpcc but dude if I were to have one this is by far the best and favorite build I have seen on youtube. I would totally copy your rig 🤣

@edwardleefilms 3 года назад

Do it 😂

@zico81 3 года назад

Very nice touch to show us how you set it up

@dhanarajod9191 3 года назад

THANKS LEE

@willwithskill 2 года назад

This is insane dude!! My pocket 6k pro is currently in the mail but I am definitely gonna model my rig off yours!! Top vid

@edwardleefilms 2 года назад

Thanks for watching!

@GabrielCuillier 3 года назад

Solid video my guy!

@edwardleefilms 3 года назад

Thanks dude!

@FosterPhotography 3 года назад

I like this build looks really good

@edwardleefilms 3 года назад

Thanks so much!

@brandonlovestech454 3 года назад

Dope rig and great informative video. Subscribed!

@edwardleefilms 3 года назад

Thanks dude!

@jplata_ 3 года назад

SICK setup bro

@edwardleefilms 3 года назад

Thanks bro!

@WorkingAxle Год назад

Would love to see a time test speed build of all this. Thanks for sharing this Ed.

@edwardleefilms Год назад

Unfortunately, sold this rig a long time ago :( Hopefully will have a new build video soon!

@kafenadedmusic 2 года назад

dam thats sick

@GASTARBLOG 3 года назад

so cool man

@massakidi 3 года назад

Great video, you should make a video changing lenses to show the workflow

@TanishkaFilms 3 года назад

Please make video.. If you want to put it your rig on crane s2. Want to see how u build it.. Coz In future i want to make this type rig.

@edwardleefilms 3 года назад

Hey there, I dont think this rig will fit on a gimbal when it is all built out :(

@DanNeedhamVisual 3 года назад

@@edwardleefilms corridor digital have a video on the ‘ultimate camera rig’ or something like that where they have a similar versatile setup to yourself, but compatible with a tripod, shoulder rig, hand held, stabilised etc all with hot swap changes. Might be worth checking out for ways you could adapt this further, if you’re in to electronic stabilisation and all that.

@marcomeeuwsen 3 года назад

Edward, could you make a pelican case video, how you store your complete rig? And how you transport it to client gigs? Cheers!

@thechalsincharge 3 года назад

great breakdown nice video

@edwardleefilms 3 года назад

Thanks for watching!

@mrhobs Год назад

I wish Tilta wasn't so proprietary... I have the Tilta cage and the Tilta baseplate, but rather than have another plate (Manfrotto in your case) under the baseplate, I wanted to keep the extra bulk/weight off the rig, so I bought the Tilta dovetail plate that the baseplate can slide onto. Yeah, I know that's what Tilta wants you to do, so I'm a sucker I guess, but I really just couldn't stomach attaching a quick release plate to another quick release plate... so I shelled out for the stupid expensive dovetail. 😅 May even get a second one if I ever find myself need to switch between tripod and shoulder mount a lot. Lame... haha Probably could have gone a different route, but I thought about it a lot, researching as much as possible, and had at least some reason for every decision, but yeah... this is just the corner I ended up purchasing myself into. Not gonna kick myself, there is only so much time and effort I can put into making things perfect, eventually ya just gotta try something.

@rawsteaksauce 3 года назад

Sick setup, keep it up mate!

@TAKUMISEGI 9 месяцев назад

bro did all that and didnt mention which mic he used. jk solid video! im currently looking into 6k G2. enjoyed the video !

@prabur.837 3 года назад

Loved this video! The tone and content was🔥 Engaging and visually 👍🏽. Stuck between BMPCC6k and the A7sIII. Your thoughts? I am looking for film like quality. Filming for short films mostly. If you were to choose one which one and why? Thanks keep creating content!

@edwardleefilms 3 года назад

I would honestly have to say the a7siii right now. It is superior in pretty much all categories. Although the BM color science is amazing and definitely gives that filmic cinematic look you're going for. I think if you plan on using one camera for youtube, client work, some photography, etc, Id get the Sony. If you are looking to rig out a mini cinema camera for more video production, id save the extra cash for parts and get the BMPCC 6K

@AlexCameron-Depiqd 2 года назад

Great setup and video Edward. Thanks. A quick question, you mention that the Focus Side handle allows you to focus wirelessly but Tilta state clearly that this side handle needs a wired connection to the Nano motor. Can you confirm that you power the nano from the handle vie a wired connection? I assume, when you mentioned focusing wirelessly, you were talking about the wooden Nano controller that you mount on the right side of the cage. Also, I assume if you’re using a T5 SSD that you’re not using the run/stop recording features of the side handle. Is that right? Thanks so much.

@edwardleefilms 2 года назад

Hey there, this is a great question and comment. You are absolutely right, the motor itself needs to be plugged into the side handle. The wooden piece is what is wireless (can be used with a monitor off camera). And I am not using the recording button on the handle

@magways4200 3 года назад

you make me wanna sell every gears I have for this set up.

@edwardleefilms 3 года назад

Nooo don't do that. Just start with a cage and build little by little to fit your needs. Not everything on this build is 100% necessary imo

@joelthalmann6401 3 года назад

Awesome build🔥. How do you pack it down and transport it between shoots? What bag or case are you using?

@edwardleefilms 3 года назад

Great question! I actually usually just keep it built out most of the time. I will just put it in my car seat with the seatbelt around it! When I do need to travel and pack it though I use the Peak Design Travel Pack and also a Pelican AIR hard case when air traveling

@mikehines14 3 года назад

So do you zoom manually then? Ever thought about getting another wireless motor to do that?

@KyleHilken 3 года назад

Awesome video man! Do you think you need both the power of V Mount batter plus the extra power of that follow focus handle rather than the smaller one?

@edwardleefilms 3 года назад

Definitely not! The Vmount is kind of an overkill now that i look back at this setup. The side handle is more than enough to power the camera and the motor. I need to come out with my slim updated rig setup soon!

@dknuckles8716 3 года назад

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

@ivanmadethis 3 года назад

What is the v-battery powering if everything is already powered by the battery in the side handle? I have a very similar rig and I power it with the side handle and it lasts for a solid 2 hours at least before I have to change the battery. Also, I did not know about the separate channels for the focus rings so thanks for the tip! Definitely going to try that.

@Chrisledelord 3 года назад

Thank you for the great build. One question, does the 15mm rod adapter for the nano hand wheel block the wireless connection between it and the motor, or laggy?

@edwardleefilms 3 года назад

No not at all!

@SmoothSkySailin 3 года назад

Impressive rig and great video... But can you disassemble and reassemble it all blindfolded in less then a minute?

@edwardleefilms 3 года назад

Challenge maybe accepted? hahaha

@Burritosarebetterthantacos 3 года назад

🔥

@RockstarCinema 3 года назад

Curious why you use the side focus and the tilts focus wheel ? And a v mount you can power it with the side focus of you have the right battery 🔋

@edwardleefilms 3 года назад

Because sometimes depending on the angle I hold the camera, it's more comfortable to pull focus on left or right side. Also, the tilta side focus needs a battery in it in order to not have a hollow empty spot so I figured I would just power stuff from there too. But definitely considering powering everything from the V-mount. Thanks for the comment!

@StellerJayFilms 3 года назад

A little tip, the Easy Rig clamp once added to your top handle can be twisted on the knob so it'll stay on tighter. Other than I'm drooling...

@edwardleefilms 3 года назад

omg mindblown. I legit did not know that. Thank you!

@StellerJayFilms 3 года назад

@@edwardleefilms it’s totally different now right? It’s like locked on and will never come loose.

@danielaroca3906 3 года назад

Nice video. Can you remove your step up ring from your adapter if you want to use with 82mm lenses? Thanks

@edwardleefilms 3 года назад

Yes! I just use the step up ring because the adapter i got is 82mm

@David.g0mes 3 года назад

Hi 👋 great rig! One question, what microphone are you using on that rig? Thanks

@edwardleefilms 3 года назад

Synco Mic D30 (still testing it out)

@ekphotography 3 года назад

Looks great, very similar to my set up.I would love the easy rig, just cannot afford it right now... Not that it really matters, but your AF switch is on instead of off...

@edwardleefilms 3 года назад

Yeah the easyrig is super expensive imo but there aren't too many high quality alternatives out there. Also, good catch :)

@MrSupereric1998 3 года назад

Hi mate! Thanks for the awesome run through. Are you able to capture 6k BRAW at 50/60fps with the Samsung T5?

@edwardleefilms 3 года назад

Yep! You can. Although the 6K is only able to shoot at 50fps for the full 6K resolution

@joshuazokou4203 3 года назад

✊🏾✊🏾✊🏾

@sireagency 3 года назад

Been waiting for this video champ! Just curious... on one of your replies on IG, you said that the whole setup costs around $4-5k, + lens and the BMPC 6K we have a round number of $10k i guess +/- and I’m wondering, wouldn’t it be better to get a used Red Raven Kit?

@edwardleefilms 3 года назад

Honestly super valid question. I think its because I haven't really ventured into RED, C300, FX9 territory yet so this is sort of me stepping into cinema with this rig. Eventually, I would love to get into an upper end cinema camera

@shawnconvey7323 3 года назад

Maybe I am misunderstanding what you are referencing, but I think your math is pretty off P6k body = $2k, 18-35 $600, Tilta Cage kit $500, Monitor $600, IndiePro V-mount plate $150 is >$4k build with some cheap batts. BUT most EVERYTHING on that list minus the battery you would need on any RED build as well (cage, battery, monitor, lenses) so not only is your build math off but your thinking about costs is maybe a bit off as well... (I realize you said used kit but you can say the same with a used P6k kit and buy 3 used BMD cameras for one Red) ...

@calebpriceproductions2412 2 года назад

If you use a v mount, wouldn't that power the monitor and nucleus too? So your not dealing with 3 batteries?

@ramonacot4548 3 года назад

Very nice rig you have here! Just few questions, why you’re not using your vmount battery to power the small hd? And why having 2 follow focus?

@edwardleefilms 3 года назад

Thanks! Honestly, I just haven't got around to ordering the proper cable for the v-mount to smallhd micro hdmi, but definitely should do that. I have 2 follow focus though because sometimes depending on how I hold the camera, I prefer to use left or right hand to focus. The side handle can be a bit awkward sometimes if I am doing handheld filmmaking

@ramonacot4548 3 года назад

It’s really about your workflow and what’s the best for you to do the job done. Thanks for this bro! Keep uploading videos like this. Especially for 6k 🤩

@standardracer 3 года назад

It's actually a good thing Edward isn't powering everything from the V-Mount battery! You can kill the HDMI port because the BMPCC doesn't seem to have protection against a ground power loop. Ground power loops can happen with any electronics. It will happen to the BMPCC when camera and monitor are POWERED from the same source, and they're also CONNECTED via the HDMI cable. The only way to ensure it doesn't happen is to run the monitor and device from separate power sources. The UMP also has this issue. There are quite a few posts on the Internet about this.

@dothefilmTV 3 года назад

you should power all with the v mount more cables but better battery management

@edwardleefilms 3 года назад

Yeah definitely can do that. I think I initially did it this way because sometimes I remove the whole v-mount portion and power everything with the side handle if I want to shed some weight off the rig

@dothefilmTV 3 года назад

@@edwardleefilms good idea, nice setup by the way ;)

@shawnconvey7323 3 года назад

@@edwardleefilms Yeah that part was quite confusing to me as well.. more batts than things to power :-)

@VexedFilms 3 года назад

Curious why you went with the pocket rigged up this much instead of getting Ursa mini? Love the rig btw very well thought out. Looks awesome too.

@edwardleefilms 3 года назад

Thanks! I think it's because I jumped to this from a Sony a7iii. This is sort of my gateway entry to the cinema world. Eventually would love to get into a Ursa, RED, or Canon Cinema level. Thats next!

@ThomasPrettyman01 3 года назад

Ursa mini suffers from fixed pattern noise that the pocket does not.

@lulumink0 3 года назад

Very cool rig tour. I need one just like this. Question though: Why does the manfrotto plate seem to have only one hole? If you mount it on a tripod, is this stable enough? I prefer two holes though.

@edwardleefilms 3 года назад

Great questions! I could probably definitely use another screw but I’ve never had any issues with just one and it’s super strong!

@lulumink0 3 года назад

@@edwardleefilms thanks man!

@ddru2439 Год назад

For your T5 SSD recording on BRAW 4KDCI how much recording do you think you get before swapping out another?

@ericcoen8894 3 года назад

If you dedicate to use V-mount battery, then the side battery handle should be replaced by a light weight version

@mariosilva6376 3 года назад

Hi! Very Nice Rig!!! How it works the tilta nano focus with the sigma 18-35mm?

@edwardleefilms 3 года назад

Works great! But I also have the 24-70 Sigma and the lens is too heavy for the Nano

@jacquelinewilliams747 Год назад

Ok so I have the tilta basic rig kit for my BmPcc 6k pro and the lws baseplate. The baseplate won’t stay on the cage.. is it because it’s the “basic” cage and not the advanced? I see you have an additional piece on the bottom of the cage that slightly sticks out.. could that be why? Any feedback would be greatly appreciated! ❤

@MyBballer9 3 года назад

nice rig! do you focus with your right or left hand ?

@edwardleefilms 3 года назад

I usually focus with my left hand and support the camera with my right

@Jose_Angel_Quintero 3 года назад

You don’t need to set the focus motor on different channels. Just double tap the “set” button on the focus wheel to set it to “slave” and it will hand over control to the focus handle. Double tap “set” again to set it to master and the wheel has control again.

@edwardleefilms 3 года назад

Dude no way, this is mind blowing. Will try this on my next shoot.

@Jose_Angel_Quintero 3 года назад

@@edwardleefilms yup Give er a go!

@mozzfather 3 года назад

Wow thanks dude, I've been looking for exactly this info everywhere! BRAVO!

@dreamteamfilms3550 Год назад

awesome info

@9Tech 3 года назад

Hey dude, dope video! Can I ask you something, what title animations, and which font are you using for your intros? They're looking sharp!!!

@edwardleefilms 3 года назад

Thanks! I use font called Lato and I bought a Premiere Pro title pack off of Envato a couple years back

@9Tech 3 года назад

@@edwardleefilms Thank you!

@Jayplicity Год назад

How did you attach the side handle to the cage? I have the cage but I have no way to secure it

@garlicburger 20 дней назад

How do you pair your side handle wirelessly? Is it not connected via cable?

@airsuper 3 года назад

Nice rig. But i have a question for you. How do you control record/stop remotely, like using focus wheel or side handle? Or you just press the Record button on bmpcc?

@edwardleefilms 3 года назад

Hey Joe! This setup doesn’t allow you to record/stop remotely. Only pull focus. For remote recording you’ll need to find a different accessory

@hellobonanza 3 года назад

Hi Edward, thumbs up for the video, very cool! 2 quick questions as I almost have the same set up. • you can actually power the nano-n via the NPG970? It has enough torque for your sigma 18-35? • how do you calibrate and get the nano-n to work with glass like the sigma art 18-35 (via the focus side handle)? I don't seem to find the right info. Thank you SO much! Fred

@edwardleefilms 3 года назад

Yes! It has enough torque for the 18-35 but for any larger lenses like my Sigma 24-70, it has a hard time. You have to calibrate the side focus handle separately from the nano wheel. I think Tilta has a tutorial video on their youtube channel!

@khenusingh 2 года назад

@@edwardleefilms Hi Edward, Nice video! I was thinking of picking up the Nano Wheel for my Sigma Art 24-70. Does it not work? If not, I will look for another solution (let me know any suggestions, if you have them!). Thanks!

@smiguel1000 Год назад

Отличный сетап. Меня всегда удивляют огромные экраны BMPCC. Зачем они нужны, если приходится ставить внешний монитор? * Excellent setup. I'm always surprised by the huge BMPCC screens. Why are they needed if you have to install an external monitor?

@mrarcaos 3 года назад

Do you get any vignetting with the 18-35 and the basecamp Matte Box? I have the 18-35 on my 4k with the Tilta Matte Mini and it gets a pretty bad vignette when at 18mm. Thanks. Love the rig

@edwardleefilms 3 года назад

Hmm I don't get too much vignetting, but I do notice at 18mm regardless of the matte-box or not, sometimes there's some slight vignetting. I usually correct if any in post. The mattebox is pretty slim I would say. Thanks for watching!

@mrarcaos 3 года назад

Edward Lee thanks for the reply dude. I’ve noticed it gets pretty bad when I stack ND and Promist on top.

@SacCarScene 3 года назад

Hey Edward, do you have a link to a shutter release handle or something to use with a gimbal? Please let me know. Thank you

@edwardleefilms 3 года назад

Sorry I don't use a shutter release handle :( Not sure about that one

@vizualizefilmsllc6225 3 года назад

Question - What type of base plate do you have on your shoulder rig that fits your Manfrotto Plate?

@edwardleefilms 3 года назад

www.amazon.com/gp/product/B07F7P1G1R/ref=ppx_yo_dt_b_asin_title_o01_s03?ie=UTF8&psc=1

@mansreimer9535 3 года назад

Great setup, but why the two different options for pulling focus?

@edwardleefilms 3 года назад

Great question! Sometimes I like to hold the camera with the side handle and sometimes with one hand on the bottom. Ive noticed having the two options or variations for focus pulling makes it easier to focus whichever way I am holding it

@sulaimaanhaq 3 года назад

@@edwardleefilms How do you seamlessly switch between the two focusing options without restarting them? I have both too but don't know how to switch back and fourth.

@navarrog 3 года назад

hi edward! do you use a dummy battery or just power directly from the dtap? thanks!!

@edwardleefilms 3 года назад

Directly from the dtap!

@kirantamang9668 2 года назад

Isn't the focus handle sufficient to control the follow focus !? and if the wireless follow focus is going to be mounted on the rails, wouldn't it be cheaper to use manual follow focus instead !? To each its own, I guess. But if I were in the similar position, I would just be happy to use Focus motor connected with Focus handle.

@johnacosta3488 3 года назад

hey buddy, do you need the nucleus nano if you have the title side focus handle?

@edwardleefilms 3 года назад

Great question! You will still need the nano because the side handle has the focus wheel but you need the actual motor that mounts to the lens and I think that only comes as a kit with the nano

@ayemacha 2 года назад

can we use the same rig for 6k pro ?

@light_leaks 2 года назад

Which adapter plate do you use to put your rig ond the Manfrotto head? Is it stable or wabbly?

@edwardleefilms 2 года назад

Its just the base manfrotto quick release plate that came with the fluid head. Its super solid and has zero wobble

@johnnyray5515 3 года назад

Will the tilta side handle you have fit on the smallrig cage for the bmpcc 6k pro cage?

@edwardleefilms 3 года назад

Hey Johnny, I don't think so. The Tilta side handle is only designed to work with the Tilta cages

@SaltFilmHouse 3 года назад

Hey great video! Have you weighed out your rig and is it over the 7kg capacity?

@edwardleefilms 3 года назад

This rig with all the parts weighs about 12-13lbs. So its just under the 7kg.

@SaltFilmHouse 3 года назад

@@edwardleefilms awesome thanks for the info. about to build our rig as well! shoutout from Seoul , Korea.

@rowangallagher 3 года назад

Is that lense not focus by wire?

@SophieinShanghai 3 года назад

May I know how exactly it works with both batteries ( the one in the back and the one in the side handle) and if you could potentially run the monitor off one of these batteries to save some weight? Thank you for any feedback!

@shawnconvey7323 3 года назад

I was also curious about all the batteries... I sometimes use the NPF and other times use the V-mount and occasionally use the Vmount for just the monitor and the NPF for the rest of them but having 2 NPF's AND a V-mount seems like there are more batts than things to power :-D

@edwardleefilms 3 года назад

@@shawnconvey7323 Yes good questions! So the side handle needs a battery in it or else it will just be hollow. In order for it to be like a grip, it needs a battery in it (even if you're not using it for power). However the V-Mount is probably not necessary. With just the side handle, you can power both the focus motor and the camera. The V-mount could also power the SmallHD monitor but you would need the specific cables. The real reason I have the v-mount is just for the added weight to even out the rig. But its not totally necessary.

@Enderlet Месяц назад

Question! How did you equip your tilta grip onto your cage? I have the same grip, same dovetail base, but there's no where on my small rig cage to attach it. I don't really understand, do I need a different attachment other than the dovetail?

@garlicburger 20 дней назад

It’s specific to the tilta cage

@talizhakniya9469 3 года назад

I never had enough torque from the npf970 to properly move the nano motors. Maybe because your npf isn't powering the camera and used only for the nano? Even though I had problems with it also when powering it from a d-tap (vlock that also powered the camera) :/

@edwardleefilms 3 года назад

Oh really? That odd, with my Sigma 18-35, I never had problems. I sometimes use just the side handle to power both the camera and the nano motor and it works perfect for me!

@Puwui 3 года назад

Subscribed.. I dont even own a camera.

@AmmayumMollum 3 года назад

How did you take the covers off? Just pulled them off ? Debating if I should do that as well

@edwardleefilms 3 года назад

You just need to take some needle nose pliers and grip the base or stem of the cover. Then just pull it out with a little force. Dont worry about breaking them because they do pop back in if you need it too. But pliers and a good grip are crucial.

@AmmayumMollum 3 года назад

Edward Lee Hey thanks a lot man I really appreciate it I had no idea that you can put those back in. Just took them off. So much cleaner.

@WiZardDrift 3 года назад

Do you have any problems with the nucleus nano motor not having enough power with the 18-35?

@edwardleefilms 2 года назад

No I haven't had that problem but I do have problems with my sigma 24-70

@torsrive8920 Год назад

Now show us how fast you put it to gimbal and back to full rig :)

@uchihaXshinoda 2 года назад

do ever use gimbles with this camera? if so what are you using?

@edwardleefilms 2 года назад

With this setup I mainly shot handheld or with a tripod. When it was all stripped down though I would use a Ronin S gimbal

@joellouisfire 3 года назад

Are you powering your Nucleus-N with your side handle or your v-mount?

@edwardleefilms 3 года назад

Powering it with the side handle! I do have a cable that allows me to connect with a v-mount as well but I prefer to use the side handle one

@joellouisfire 3 года назад

@@edwardleefilms gotcha! I think I'm gonna do that. I heard it works better powering through the side handle than a usb portable power brick (which I currently do.)

@moneyboys2010 Год назад

I know this is a late question.. but which one of the Focus Wheels do you prefer the handle wheel or the wooden accented one ?

@edwardleefilms Год назад

Personally I prefer the wooden one!

@moneyboys2010 Год назад

@@edwardleefilms Thanks Edward, I have been on the fence for over a week on this decision because the handle looks comfortable 😅

@joshdiditt 3 года назад

You must be Potato Jet little brother, lol.

@edwardleefilms 3 года назад

Ill take that as a compliment haha!

@hanabaric5607 3 года назад

can I put smth like that on my ronin mx? and do i need a cage if I'm using ronin mx ?

@edwardleefilms 3 года назад

This setup might be hard to fit on to a gimbal due to the size and weight. You'll probably have to ditch the cage and strip it down

@akfilms3574 3 года назад

Please, could you give an exact name of used music tracks?

@EverythingColossal 3 года назад

my nucleus nano motor is too weak for the sigma lens. do you get the same problem??

@edwardleefilms 3 года назад

I do have that problem too! But only with my Sigma 24-70. Not the 18-35 that I showed in this video.

@apotones7869 3 года назад

Hi can you please make video on 6k pro black magic

@edwardleefilms 3 года назад

I haven't tested it out yet, but its in the works!

@mannahatamovies 3 года назад

Hello. I have the Title cage for the Black Magic Pocket 6k. I attached the side handle and cannot figure out how to get the handle back off of the cage. Any idea? Thank you

@edwardleefilms 3 года назад

There is a little button/trigger that unlocks it. Its small but its on the lower side of the cage/camera body

@mannahatamovies 3 года назад

@@edwardleefilms Thanks. Found it!

@philipkarst7918 3 года назад

Do you have idea how to build something with smallrig to record vertical? There is not information in all youtube about that, thanks!

@edwardleefilms 3 года назад

I am not sure about a vertical rig... but that would be a cool video to create!

@philipkarst7918 3 года назад

@@edwardleefilms Do it, and I think it will have a lot of visualizations because you add a lot of value. Today many videos are vertical, everyone talks about the crop but I think it is easier to turn the camera and record exactly what you want. The truth is that nobody knows how to mount a BMPCC vertical camera. I will be looking forward to it. Thank you for your response and time, I appreciate it very much.