My FIRST 3D CNC engrave

Подписаться 30 тыс.

Просмотров 5 тыс.

50% 1

My first 3D CNC engrave came out nice. Having a CNC for only a few weeks and being able to do this made me very proud. The upgrades to the machine and the information I have collected is helping me turn out some great projects. I finished up this project with a little laser engraving.
‪@SainSmartofficial‬
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/shop/TheClackShack
For Clack Shack shirts, check out my store:
the-clack-shack.creator-sprin...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
Genmitsu 4040 Pro from Sainsmart- www.sainsmart.com/products/ge...
Genmitsu 4040 pro- amzn.to/3YfqGiQ
Woodworker's tape- amzn.to/3q8xFhc
Genmitsu 1/4 inch bits- amzn.to/3OyimaK
DeWalt router- amzn.to/3OAlMKo
69mm adapter for 4040 pro- amzn.to/3DxxNJZ
Affordable CA glue- amzn.to/44MiSYt
DeWalt dust shoe- amzn.to/3QhKHDK
DC to AC relay- amzn.to/3qacfjD
The Clack Shack on Amazon= www.amazon.com/shop/theclacks...

Хобби

Опубликовано:

28 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@chucklenz9011 11 месяцев назад

Always learning, always advancing the abilities through new devices. But relying on the building blocks you’ve learned in your journey.

@TheClackShack 11 месяцев назад

Thanks..

@OregonBladez Месяц назад

I'm new to CNC I ordered the 6050 plus last night, and then started searching for videos. I'm now off to look for a video to wire up the DC to AC relay.Thank you for sharing your journey!!

@TheClackShack Месяц назад

My CNC setup ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ybt4rj9RV3A.html

@naterife8871 4 месяца назад

Very nice.

@TheClackShack 4 месяца назад

Thank you

@sharonsimonson5392 11 месяцев назад

Love the project! Can’t wait to see how Abbey finishes it!

@TheClackShack 11 месяцев назад

Us too!

@isaiahgillett2573 11 месяцев назад

Looking forward to seeing how it turns out!

@TheClackShack 11 месяцев назад

Me too

@warrenking1815 6 месяцев назад

Thanks for the videos, I am thinking about buying the same machine and adding a laser. Good information and explains.

@TheClackShack 6 месяцев назад

Thanks. I am looking at an upgrade. I am suppose to be getting a 600x600 upgrade for the 4040.

@karenladwig 11 месяцев назад

Would like to see more hands on your projects!

@TheClackShack 11 месяцев назад

Maybe...

@stevedonalson5675 11 месяцев назад

Fantastic job! I look forward to seeing the finished project.

@TheClackShack 11 месяцев назад

Thanks.. so do I

@lornacurtis8897 11 месяцев назад

That is GORGEOUS😮

@TheClackShack 11 месяцев назад

Thanks,,

@joelbcaudle 11 месяцев назад

I have done CNC work for a few years now. One piece of advice, the Dewalt really does not need to go beyond 2 in the speed setting. The speed varies from 16,000 RPM at the lowest setting (1) up to 27,000 RPM at the highest setting (6). Going beyond 2, you will burn through brushes much faster. Oh, that would be a second piece of advice, get a spare set of brushes (or a few sets). Brushes will pick the longest 3D carve you have ever done to fail on :)

@TheClackShack 11 месяцев назад

Thanks, I only run it on 1. I also have a spare router on standby. Also have some spare brushes. I hear that they aren't too hard to swap.

@lindabowers7390 11 месяцев назад

I love this 3D ingrave that you made. After your daughter does her painting we have to see it.

@TheClackShack 11 месяцев назад

You will...

@lindabowers7390 11 месяцев назад

I really like watching your channel. It's real interesting to watch what you are doing. One day I will be ordering something from you for my home. I do have the things you've made for Maymay and I love them. It was so nice to see Brandy out in the shack with you on the video. You guys are a cute couple, and your daughter is beautiful. Great little family. In some ways you remind me of my late husband. Maybe it's the accent. I love listening to the different accents. My husband was from Arkansas. Have a great day and give my best to your family.

@TheClackShack 11 месяцев назад

Thanks, Glad you like the channel.

@poeticdecadance993 11 месяцев назад

It s interesting to combine those two methods. 👍🏿

@TheClackShack 11 месяцев назад

Glad you think so! I thought it had to be done...

@wesleyjackson1036 11 месяцев назад

You've picked up the cnc really quickly. I'm learning both the CNC and diode laser right now. Your videos on Lightburn have been terrific. I went with a Onefinity CNC and I quickly learned that the software discussion is just like Ford/Chevy/Dodge discussions. I'll be curious to hear your opinion on the similarities between Lightburn and Easle. I'm trying Carvco Maker right now. I seem to compare to Lightburn because of how easy it has been to learn.

@TheClackShack 11 месяцев назад

I just dropped $$ on Easel. It takes a lot of the guesswork out by providing settings based on the motor and bit size. I also like the graphics they have in the library. Just gotta make my $ back with projects. Thanks for watching.

@stevekaufmann1565 5 месяцев назад

Can you give us details on how you hooked-up the router to go on and off with the CNC machine?

@TheClackShack 5 месяцев назад

It uses a DC to AC relay. I connected the relay inside a fixture box and mounted it to the side of my table. The router power is ran through the relay which causes the DC signal to turn it off and on. The power to the DC relay is pulled from a chip extraction relay that turns on the dust collector automatically. I will do a video on the new setup I have which works the same way. This is theDC relay I used. amzn.to/47W3l9v

@chrisgallaher3899 11 месяцев назад

Just heard from Jason today, LB CNC is working but looks like not being released until Q4, so could be as early as 8 weeks away. The one comment he did make that I really liked was it looks very similar to LB, so sounds like it will be a separate product not just a Licence upgrade, just waiting on his answer on that, either way I'm getting it. From that Pic you overlaid Little Miss Clack has talent to burn get her to send some my way so I can graduate from stick figures LOL.

@TheClackShack 11 месяцев назад

She should do a good job. Maybe soon

@craigkoht5967 11 месяцев назад

Im a woodworker about to retire from my real desk job. Looking forward to upping my sawdust game to some automation. First step will be a diode laser. I have REALLY enjoyed these Clackshack videos - Thank You for sharing !!

@TheClackShack 11 месяцев назад

@@craigkoht5967 , more to come... Hit that SUB button.. Thanks

@pietermulder9199 11 месяцев назад

Buy some needle files to sand those creases you want. 16:48

@TheClackShack 11 месяцев назад

Thanks..

@QuiltersHandyman 11 месяцев назад

Have you looked into vectric software more powerful....more expensive but not a yearly subscription. Believe me it becomes less expensive the longer you use it.

@TheClackShack 11 месяцев назад

I almost made my Easel money back in 2 days so far. I plan to try others but had to get the machine in the job flow and Easel came easy. I haven’t been able to try out the others and prefer to test drive before I buy.

@ericeinsmann5559 11 месяцев назад

That looks fantastic! What software did you use to do that carving? I was unable to listen to it, so if you mentioned it I apologize.. Good job!

@TheClackShack 11 месяцев назад

Easel

@davidmac2134 3 месяца назад

I just purchased a 3030 prover max got it setup ran the test file, now I want to cut out a part I designed in emachine cad and it won't accept any of the files this software offers. What's cad software do you use to design for this CNC?

@TheClackShack 3 месяца назад

You will have to set up a post processor to output the file to gcode. I use fusion 360 for designing and import the stl file into vcarve.