you are an inspiration. i love and enjoy your channel. at almost 60 years old, i bought my first indian scout bobber. i will try to send you some pictures or videos of it via twitter. i am excited and tickled to death with it. thank you!
Much awaited video is finally out.. As always, brilliant content and your channel has been a blessing to the bobber community. The bike looks so darn good brother. Thank you so much for everything you do and wish you a million subscribers soon!
Ive been following you since I bought my Scout 60 bobber a year ago. I just watched this compilation of all your upgrades. I was happy to see you have the same seat on yours, the Jarod Mees. I love mine. I did a little more for the installation, I bought a seat mount for the back part of the seat, so it slides into the back mount (like on the scout) and then you fasten the front. It did require some careful measuring, drilling a hole in the rear fender and using a nut-sert, but I figured that part is always going to be covered even if I take the seat off in the future. Keep up the work, I love following your posts and upgrades.
Awesome, thanks! Yeah the Jared Mees seat is nice. Sadly, mine was vandalized and I had to get a new seat and ended up with the Syndicate from Indian. It's pretty dang nice ... but I loved the look of my Jared Mees.
This is all really fantastic stuff! Great inspiration for my own bobber build. I am really interested in that air filter, tuner device, and cruise control especially! Did you install those pieces yourself? Or have a shop do it?
I love this video. I love your mods. I still see the silver screws on the engine case. I have caps for sale for $50 + shipping available if you're interested. They're flat flack and look amazing
Can’t make my mind up between your fairing and the Indian fairing,, love your seat , most definitely getting that. Fell in love with it,, 👍 kinda wish I had two of the same bike so I can make them two different set ups..
Thank you for running through everything! I've actually used your videos in the past to gauge the improvements I am performing for my Scout Bobber 20. The 2-Into-1 Exhaust + High Flow Air Filter are amazing for performance increase. Mine makes 90 HP and 67 ft•lbs of torque without the PV3 but soon as you said you make 100+ HP and about 90 ft•lbs of torque I hopped on revzilla and ordered me one! Haha Anyway keep on living life man and enjoy your awesome Bobber! 👍
Hey Army dawg!! Love the channel. Your vid’s helped me pic the Indian Scout Bobber. I picked it up a few days ago. Keep it up! One question, where did you get the license plate holder!?? I want to move mine. I really like the way it looks as it adds to the bobber style, but man I smack my leg on it!
Go Army babeh! That's awesome to hear that I swung you over to the bobber, it's a bad ass bike for certain. The license plate holder was custom made ... BUT ... I think you can find something like it on amazon.
Nice vid, love the build. I just got rid of my 06 R6. And wanting to get a Indian Scout bobber. Question regarding the mustang Jared seats. How’s it ride and feel for the passenger?
My daughter is okay on it for about 30 minutes, after that she doesn't like it. If you are going to do passenger a lot I would look at a corbin with a corbin pilion seat.
Beautiful bike! The twisted chopper vaulted handlebars look sick! Do they have more sweepback than the stock drag bars? And did you need to replace the stock clutch and break cables and wiring to fit them?
I cant decide on this scout bobber or stepping up to the Harley street Bob. I LOVE the looks of the scout but wondering if Id wish I got the street bob for any reason. Most my riding will be in town with an occasional ride from Phoenix to Sedona which is only about 100 miles. Thats probably the longest trip it would go on
@@TimKollat Thanks! The thing I like about the scout is that it is high revving. If I were to choose one over the other, the scout would win every time.
Thanks so much! It’s been 20 years since I have owned a motorcycle. My last one was a Honda Magna 750 with V4 engine. Been looking at the Bobber Twenty for my next ride. Hope to get one soon! Your videos are helpful with all the different things you can add.
I have a question Sir, I installed the Memphis Shades Cafe Fairing on my Bobber and was wondering what You did/used to cover all the wiring that the Cowl Used to cover ? Thanks in advance and look forward to more videos/informative information 👍
I use a handlebar bag to sit on top. Specifically I use the Burly Brand bag and it just sits over top to hide / and protect them a bit. The headlight wiring harnesses are all water proof so as long as they aren't in direct striking water the'll stay good, clean and well connected.
Happy holidays. I just installed the same fairing on my 21 bobber and I noticed that your head light protrude out a little. My head light is recessed about 1in. I am 100% sure that I order the correct headlight extension.? Did you do anything different to get it to sit out the way you have it. I like that look better.
I'm sure you ordered the correct stuff. The grommets are adjustable where the fairing sits on the clamp grommets. Those can be pushed out or in about an inch or so. That's all I do.
I have ridden the scout and it's more comfortable out of the gate than the bobber. In hindsight I probably would have been better suited for the scout based on the changed I've made
@@dadwithabike Understandable! I don't think you'd have that issue with what they have. If I'm honest, I'm not the biggest fan of Kuryakyn in general, but that cover is a slick little piece. Zero regrets on mine 🍻🤙
I love my bobber but I don’t know I’m on the fence between getting another bike more than likely a sports bike I love cruiser feel but I hate the comfort and I know if I get a sports bike I won’t get any more comfort but I’ll get added fun in my opinion I just throwing my ideas out there to get some suggestions back I’ve also thought about getting a Springfield dark horse, I just don’t really know how I want to set up my bike I like aggressive but what comfort and normally they don’t come together
@@dadwithabike Do you think a Corbin seat is worth it as I have a mustang already but haven’t changed stock shocks it’s I think shocks or a different seat
You still rocking those twisted chopper bars? I have been researching and those seem to be a great compromise of performance, comfort and ease of install. We’re they pretty easy to install with standard cables? Any regrets? I’m 5-10. Thanks in advance
I actually just moved to 8" Titus bars from Dean Speed. Sadly, my vaulted started to have a weld fail. I still went for 8" but I think I like these Dean Speed more. Stock cables work just fine, but I upgraded my clutch cable to a Barnet cable
@@dadwithabike whoa. Weld fail on handlebars is NOT GOOD. dean speed website is saying like 8 week lead time did you experience that? That’s the primary reason I am looking at others.
@@briandrake496 Yeah, it was exactly 8 weeks. I "kinda" saw the failure coming and got ahead of it so I got them in time to not miss any riding. Sadly, most custom places are about that long. You may get better response from FMB Chopper Parts but they just didn't have the bars I wanted.
So I "think" it would fit. The quick release for me is set to the closest setting and you have 5 more notches in the fork mount to grow on the fairing.
@@fishballx8 No, they are a direct swap. Mine did not come with pins so make sure to use your stock ones. It's also a good time to replace the pig tail pin with a pinch pin on the retaining bolts
@@dadwithabike you mentioned in a previous video that your daughter wanted to start riding, and that you were going to start riding with her on the back. Does she have any complaints about the Mustang seat? If that’s asking too personal a question I understand. In either case I think it’s fantastic she wants to ride and good luck to her.
@@MrJoeylap as long as we keep it under 30 minutes she's fine. Much longer and she hated it. If I were doing true, long 2up riding I'd need a different bike.
@@dadwithabike all I have so far for my 21 Bobber is a windscreen from Indian and the license plate relocation kit done. Still have lots of plans, but all boils down to cash at this point. I've saved all your videos for idea's! Keep em commin and ride safe.
@@dadwithabike haha dean speed is here in AZ, and when I went to pick up some stuff from them, they told me that they had an influx of orders for crash bars after my video 🤣 but they are worth the money that's for sure
Sometimes the baffle is in, sometimes it isn't. If I'm going on a ride with my club I'll throw the baffle in .... no one wants to ride next to me when it's not baffled - lol
It's from TechSpec and you can get them from amazon. Here's an example - www.amazon.com/Techspec-Tank-Grips-Protector-62-0007-SS/dp/B00HRGMDR8/ref=sr_1_77?dchild=1&keywords=TechSpec+Gripster+Tank+Grips&qid=1634689064&s=automotive&sr=1-77
