My NEW Pete is in the shop…. 

Nothing like putting more poison in the ground so that we can plan something to grow on it so the animals can eat it and get poison themselves. That’s smart

@Bruce Wilson by law you have to run your straps through the rub rail. If by any chance you get side swiped or side swipe someone, your straps can be cut and you can lose your load. Got a ticket for it when I first started runnin flat and figured I could save you a ticket.

Thanks for the great content. They don't make them like they used to and it seems like most of the problems with new trucks has to do with the EGR / DEF systems. All the EPA required stuff that is necessary evils. Glad you got a good shop that got you in and out quickly. Very nice 👍 ✌️🇺🇲

I’m glad that you resolve the issue with the engine light.Thank you for the video.

Glad u got your truck fixed and able to keep rolling. Cool video

Just a few hours north of you in a little town right outside of Alexander city, in Daviston I’ve got almost 600 acres here, man when I saw those booms on your sprayer I thought back to the days before I found out about boomless nozzles now I spray 30ft an have no booms to fold an unfold

I did dpf inlet and outlet sensors all the time. Most of the time it's the small piece of hose that gets brittle. Not the sensor!! It has a metal pipe then house connects the sensor.

Drive safe out there Bruce and glad you got your truck fixed

I’m from Alabama and our hunting camp is in Shorter,Al I love it it’s just a good country boys way of life

I saw your spayer and thought, "Where is the PTO drive shaft?" Then I saw the PTO pump hooked directly to the PTO. My grandfather's (35 years ago), had the pump mounted on the sprayer with a PTO shaft between the tractor and the spray unit.

Had issue with my 389 it was the DEF sending unit an pump inside def tank it has went out 2 times in 156,000 miles other than that no other issue knock on wood good luck brother be safe an be cool on ur stool

Cool I’m just up the road from Eufaula in Columbus. There’s some good hunting down there.

Don't know if you know but straps on the outside of the rub rail are illegal. If some jackass comes barreling at ya and side swipes ur trailer ur really gonna be wishing the strap was on the inside of the rub rail. I'm not sayin that to be right or wrong i'm sayin it so you won't be that guy in that position on the side of the road/interstate who lost his load cuz the strap got cut. Love ur videos and stay safe out there driver.

I worked in a dealership and we were forever renewing the Differential Pressure Sensors in the DPFs on our diesels. The sensor measures the inlet and outlet pressures of the Diesel Particulate Filter and informs the ECU so it knows when to regenerate. If it fails the DPF doesn't know where it stands so it throws out a warning message.

Hey Bruce put your straps on the inside of the rub rail so u don’t start to bend them. Will keep the trailer looking better longer just my 2cents love your videos keep them coming

Awesome to include your dad. 👍

I doubt you’ll see this but love the videos I always watch you when I’m having shitty days I got let go from work because I missed grease pins and I busted my hand up breaking my cover for the speedometer and the other gauges on the dash but i enjoy your videos they always make my day man

I hunt and live in south Montgomery county, about an hour and half away from Eufaula. Good deer in those parts.

For non truck owners or drivers, these videos are very informative!

Nicely done enjoyed all you did. Hope you do more videos like this one.

Love the deer lease bit of the video ! I hunt every deer season since I was 4 years old in east Texas. Keep up the good work Bruce!

I’m over in Tifton, GA. We fish a good bit on Eufaula but have never hunted over there.

Next yr I hear dot is going to require new seat pressure sensors. Reads the carb outtake so there won’t be to much carb and bean intake. New drivers only. 😉

Another awesome video Bruce!!! I love the variety please keep them coming.

Had that same sensor go out on my 2021 t680 last week this week I’m in a 2023 t 680

Nice to see family hunting related videos,thanks

Hey Bruce love all the farm content. Hate be another nitpicker... but ya really should run your straps inside the rail of your trailer it will eventually wear off the reflector tape and bend the rails if you crank down to hard. Can't wait to see blue collar all painted up and those fenders we keep hearing about.

It's honestly not a surprise Bruce, New Trucks / Buses typically go through a break in period where all the bugs need to be worked out. It doesn't change no matter the company. I don't drive truck, I drive School Bus, Thomas bus ( Freightliner ) I got a 22 bus this year, been in the shop more often then my 2018 bus I was driving cause all the stuff that needed to be worked out on it.

Lots of nice deer in Barbour. You need to head north of Gadsden and talk to Tom Frederick in Priceville. One of the largest Mahindra distributors in the country.

Hey Bruce I drive a roll off dumpster truck up in Chattanooga it’s a 2019 Mack , anyway it has the def , dpf on it and the only thing that drives me crazy is the parked regens there not to often right now but the come at the worse times lol , I just really don’t care for the emissions on the trucks the seem to cause more issues then the fix

That was cool how you loaded that tractor without ramps.

I just came across your channel and decided to subscribe, Im sure I’m going to enjoy watching your videos thanks for being there for us viewers. Catch you on the flip side Big Ben lol Oh man I just opened my eyes fully and seen the gigantic size of your trucks coal burning mile high stacks…….betcha they sound as wonderful as they look. Tally Ho

Hey Bruce I was the trucker that shouted at you on 285 yesterday seem like you was coming out of Alabama I was too

Should always check the pin on the 5th wheel to much sure it's locked in I have dope a trailer because I was being lazy and dumb and in a rush lol

Payson, Williams or Springerville Arizona is where we pound ground for mule whitetail deer or Elk

It's a pretty truck. It'll get better over time.

I grew up in a small town called Headland south of Eufaula.

It is a short hood. It dont have the extension between the drivers side battery box and the front fenders

Bruce I been with u from your early days I am from Gadsden Al wish I couldn’t met u in person

Your in my home town nice to know that

Greetings from Gadsden. Love the videos, the pretty blue Pete, and the ole freightshaker too 😉. Safe travels bro.

Central Missouri West of the mighty MO. Corn fields and the Missouri River bottoms. Best of both worlds.

Hunting northern wisconsin and upper peninsula michigan.. also side by sides and snowmobiling in the winter.

That truck shop right down the road from my house

Wow Bruce you could get a part-time job smoothing out gravel driveways

Salute to everyone grind and Motivations....

Hell yea brother! Rockin that Freedom Factory shirt!

Thumbs up for your pops bruce!!!

Thank you EPA.

I go hunting up Flagstaff Arizona the beautiful country and fresh then down south about 27 miles from border

Not dpf related, but had a brand new pete 589 with a bad radiator at 140k come in

The John Deere dealership in Moultrie ga is a cool dealership I been there they usually have nice tractors there

You should paint the under carriage of your trailer blue to match your truck! That would look awesome!! Greetings from Idaho.

Hell I should have came out there I live 20 minutes away in Dothan

High five from a fan in Melbourne Australia ......

Porter County Indiana. Look forward to your hunting videos awesome content Bruce.

Need more hunting camp/lease content! Love it

2022 579 engine wiring hardest. Gear shifter automatic went bad

Wow a brand new Peterbilt in the shop after three months. And these are supposed to be the best made trucks in the country.

Yea those are 255/70/22.5 tire that's what I got on my pete

R Kenworth was in the shop not long ago for a dpf problem and would love to see hunting videos

I have been hunting with my dad in north east Oklahoma since I was old enough to go hunting

Fun fact that Peterbilt cabover is actually used as garbage trucks and they are both rhd and lhd sometimes

now that's the Bruce I follow great beard dude 👌 👍

Do you have the part number for your breather light brackets? I’m looking for that same style for my truck and can’t find them anywhere.

Last time I found crops grown in little patches like that the good ole boys chased me off wid shot guns and hounds

Should have bought one of the goods ones, pre 07

Keep up the good work

I'm from Berlin g.a bout 3 miles from the mud ranch

keep the clips coming

The tratter taxi really needs color matched painted tanks and rear fenders.

Sounds like Agent Orange we sprayed to cut down the bush in country in Vietnam!!!

Love your videos and getting better

The rear hubs let your truck down Bruce… you need hub caps and nut covers!

You better get a spare nox sensor and keep with you. That will be the next thing to go out.

Is there a reason why the straps are on the outside of the rub rails?

Your an inspiration for me bro im from Tampa Florida

Bruce and family, I've been watching for a LONG time. I was watching when you were out in the yard with the 1st cabover that Braxton has now I believe.. well in all that time I've never seen your dad in a video like that. Usually a couple of words and that's it. He really seems like a real nice fellow. Im sure he's taught you alot over the years. Be grateful for the time ya'll have had together and enjoy ALL the time thats still to come. Bruce im sure you know how blessed you are to have such a hardworking and supportive dad like you have. I live bout an hr. from ya'lls hunting property so next time ya'll are going just hollar at me I'd be super excited to meet ya'll but also stick around for the day and help out with whatever work ya'll are dealing with and for free no shit free. Well maybe a t-shirt or sticker... ha ha lmk if I can help out ...stay safe and keep that tratter taxi washed and polished

Great quality video

Love the videos Bruce when are you going to hook up the stacks make it sound like a real truck

Wouldnt mind seeing some hunting footage this fall! pennsylvania hunter here!

Hey buddy I love all your videos. This shows my wife's name. But I'm a 63 year old man that loves hunting .I hunt in Hegesville WV.

Dang old Dirty Peterbilt !!!!!

Cool video man 🤙

very cool video. i really enjoyed it

I was wondering Bruce, why did you choose the 389 instead of the 589? How do they compare in cost?

I hunt in my back pasture here at the farm

All paccar stuff suffers from DEF / ADblue sensor faults my DAF XF 480 had a new Nox sensor last month

Awesome 👌

You should check out one of the 567 models it's like 589i think that's what you called the red one the have a look all there own 👍🇺🇸✌️

My ranch in Central Texas

You need a special tractor flatbed truck for local delivery and pickups I think

Ayyy special guest dad made an appearance!!! Would love to hear him talk on the channel more! I’m sure that man has years of wisdom and knowledge to share!

Another awesome video Bruce glad you you got your truck squared away that's a vidal piece of the operation thanks for sharing buddy 👍

I hunt in northeast Louisiana and Arkansas but I would really love to see you do some hunting vids for a change

Dont feel too bad my new 567 had bad kingpins from the factory

Those sensors needs to come from Eindhoven I think, that's where your engine has been assembled...

One day I might get to meet ya or just see ya going down the road Bruce! I’m a Moultrie Native 😂!

I like the farming and hunting

Kansas has some good deer