My Supercharged Corvette Broke Again But Fixing It Made It Even Faster & I Found The Previous Owner!

Подписаться 1,2 млн

Просмотров 615 тыс.

50% 1

They are now running a Black Friday Sale Day Sale! Go to kamikoto.com/LEGIT to get an additional $50 off on any purchase with code LEGIT. Thanks to Kamikoto for sponsoring today's video!
In this video, we fix the Corvette twice and get it running better than ever! This thing rips and listen to that blower! I also talked to the previous long-time owner and recorded the entire conversation!
Be the first to subscribe to my second channel, LegitStreetCars 2, and win a $500 gift card! Just subscribe, hit the like button, and comment "I subscribed" and then whatever else you want to say! Once we hit 100,000 subscribers I'll pick a random commenter!
/ @legitstreetcars2122
Phone call with Marlon the previous long-time C4 Owner!
• I Spoke With The Previ...
www.creoil.com/products/cre-oi...
Code Legit50 for 50% off your second bottle!
Get 25% off all Amsoil products including their synthetic engine oil! www.amsoil.com/offers/pc/?zo=...
Enter to win the C63 for FREE! modsandmiles.com/s/LSC
Check out the live listings at bit.ly/3yrKinI and list your car for Free!
LSC Merch & New Signature series shirts including SVT Lightning & E55 AMG shirts and posters. www.legitstreetcars.com/
Use Coupon Code LEGIT For 10% off Sonic Tools! Combine Code With Other Sales! bit.ly/3iNDtGU
Try a sample tool kit for only $60! bit.ly/3CSBqcB
Everything car-related I recommend from Amazon! amzn.to/2k606

Авто/Мото

Опубликовано:

18 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2 тыс.

@LegitStreetCars Год назад

They are now running a Black Friday Sale Day Sale! Go to kamikoto.com/LEGIT to get an additional $50 off on any purchase with code LEGIT. Thanks to Kamikoto for sponsoring today's video!

@ourback Год назад

FYI Kamikoto is the Fram of knives...

@zaidsingh3571 Год назад

Legitstreetcars were is your white turbo charged trans am

@eisaatavilla210 Год назад

One comparison of Kamikoto knife steel quality. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OpRNqZJPPBk.html

@DanStMary Год назад

Joan Osborne "one of us "

@aspenyukon6845 Год назад

Ect temp sensor is bad. Engine coolant temp sensor controls fuel trims.

@mcdoob Год назад

Love waking up on Saturday to some legit street car videos. It’s like adult version of Saturday morning cartoons 😃

@jeremyTallen1 Год назад

My feelings exactly!!!

@shanedoink Год назад

I know right! Saturday morning staple around here.

@kjbober Год назад

Totally agree!

@danhard8440 Год назад

my Sunday mornings were New Yankee Workshop and this old house

@singeonjurado473 Год назад

Right!

@rollandsaxton Год назад

I love how you show how to actually diagnose faulty components rather than only showing how to change them like most RU-vid channels. Parts changers vs true techs.

@GldVWisRR Год назад

👍👍

@joseacuna3239 Год назад

This is the kind of content I do appreciate, mechanic, diagnostics, figuring it out, this is just amazing and the rollercoaster of emotions is very relatable

@Digital-Dan Год назад

It makes sense as a consumer to replace things that break with new items, but on these shows I'm always much happier when presenters dive into the inner workings and actually repair devices that can be repaired. The boiler room is a fascinating place, if only one is willing to go there.

@18stickshift Год назад

Love how you actually do mechanics stuff. Not just throw new parts at it but to diagnose and repair the issues. Keep it up!

@tracygreene1590 Год назад

Because obviously they have money can you buy all the stuff they use just a question

@18stickshift Год назад

@@tracygreene1590 most places would have never even thought about fixing the fuel sending unit. They would have just replaced it

@kraig7777 Год назад

@@18stickshift Flipping that plate was genius

@keithbrumagin4234 Год назад

Peter cracks me the hell up.. “we all wear them at work” what a knucklehead he is fun to work with I bet Alex. You 2 rock!

@alexismendez4896 Год назад

Especially when he says “what does taste like?” To Alex best moments 😂

@keithbrumagin4234 Год назад

Yeah right..I’m usually laughing till my jaws are sore lol

@gosh7001 Год назад

quickly becoming my favorite channel on youtube. Keep it up. This is what we look for in automotive youtube ... not all the "house" updates, shenanigans, fake "wrenching" with projects that never get finished, etc --- Awesome content.

@trentharvey7508 Год назад

Awesome job guys. I love the fact that y’all are legitimately having fun wrenching on the C4 and working through its nuances instead of getting ticked off with it like most people do. The results are truly gratifying. There’s nothing like a C4 slaying rubber

@edbrown2061 Год назад

Joan Osborne - One of Us. Feel the pain with those header bolts. The tube bend on SBCs make it impossible to use anything but an open end wrench. The wrap doesn’t help.

@radarnj8043 Год назад

The song was written by the Hooters Eric Brazilian.. Philly band.

@erikfarrell7152 Год назад

Please Alex, keep doing what you're doing. I wait and look forward for 10:30am every Saturday! Oh, and Peter is the ish!

@nickr242 Год назад

Love the reaction of getting into a car and being so happy when you put your foot to the floor! Corvettes are my favorite and this series has been awesome! I can’t wait for the detail video and to see how fantastic this is going to look. Are you getting new target tops for the vette?

@dersteirer74 Год назад

honestly, your videos are great: we can see all your effort, the details, the trouble, ups and downs. And your kinda stubborn way to get it back to the road. I really enjoy that, and you're totally down to earth. No hipster fancy schmancy stuff, but very interesting and entertaining!! Thank you!

@salty_dabs3565 Год назад

Peter needs the car for a bonus! I'd like to see that happen. So much fun in his face driving it.

@AnthonyIlstonJones Год назад

I second that one! They did a car for the editor & that was a good episode, I think you shoould surprise Peter with the keys & title one day soon.

@mikeyd5969 Год назад

There are very very few channels I watch that I truly get excited to watch. Saying that I must admit I’m like a little school boy when I see your new vids pop up . Thank you for that , we all need something to smile about these days .

@noonehere1793 Год назад

I have always changed my “lifetime” transmission fluid every 50,000 in my Audis and have NEVER had a problem even with the good old tip. I think a miracle happened with that corvette. I bet there are not that many people who would have spent the time and effort to sort it out like you and Peter did. Most would have gotten it to run enough to take it to Alaska and fly it off the cliff up there. I loved my old C4, it was a great car and only had one major problem strangely with a cracked exhaust manifold! Great job trying to save this old boy.👍👍

@diydad9303 Год назад

Peter’s face getting squirrley with the C4 is priceless

@curvs4me Год назад

1/4 Keyway stock zip tied to the suction hose. Leave it up from the end of the keyway stock a little more than a 1/16 of an inch. Then you have perfect control. You can substitute a 1/4-20 threaded rod. Just a few inches of ties at the bottom works like a pool vacuum.

@superhawk20002 Год назад

I had the EXACT same issues with a 96 LT1 running a procharger... for a few years. We sent the car to multiple shops and dealerships over a 3 yr period. In those 3 yrs less than 1500 miles went on the car, more miles were put on the truck and trailer transporting it around. Procharger eventually got involved and worked with Fastchip (tuned the ECU) and finally got things to work correctly -> we ditched all the MSD stuff I was running (just like in your vette), went to a factory Optispark, and ran the coldest cheapest autolite plug possible... and the car FINALLY ran correctly. I was ready to scrap the TransAm/LT1. I loved the car and it ran perfectly before putting a blower in it. After the blower install, some days it would run great, other days sounded just like your vette. I went thru so many parts and so much money... I replaced the ECU just like you did and it worked for a day or three, then back to square one. We would take it to dinner and it would run great, then leave dinner an hr later and the car would die one light later, and stranded we were again. So many highs and lows -> I felt Peter's roller coaster of emotions in more ways than you can imagine. Call procharger if all else fails. I think the MSD stuff was the main culprit in my experience. Good luck.

@neilbrown82 Год назад

Best thing you can do with an LT1 if you're going to keep it is do a 24x conversion so you can run it on a modern ls 411 PCM and it removes the problematic opti spark for a coil pack setup

@EricScheck Год назад

You guys are the perfect duo. Thank you for this content. I had a 1985 c4 that I restored and all the things you're doing really bring back memories. Really looking forward to the resto!

@ijimppangi Год назад

Love the cars you feature on the show and not going the super car route. Just affordable cars that an average car enthusiast may possibly own one day. No matter how big you got, you’re still sticking to your roots and staying humble. This channel has my vote for the best car channel in all of youtube. This and Hoovie.

@pilotgirl5953 Год назад

This C4 Corvette series has been awesome I just purchased a 93 C4 anniversary edition as well and I changed all the filters and everything and a few of the other issues I’ve had you have addressed. I’m going to do as well. thank you so much it’s awesome to see. Subscribed!!

@amaresch66 Год назад

Sheesh Pete. Joan Osborne - One of Us. Looks like Ruby was pretty loose; can't imagine that was a good thing except for this one instance.

@jeffrogers2180 Год назад

They even used it in Austin Powers. 😂

@jordanmercier3616 Год назад

Lol my wife didn't remember that song either somehow.

@FrldyZX87 Год назад

@@hkmonaro8153 🎶What if God was one of us? Just a slub like one of us. Blu blu blu blu. Yah blah blah ble ble🎶🤣😆

@billjohnson717 Год назад

@@jordanmercier3616 that's ok I gave her something to remember last night

@Boostedm3nace Год назад

These videos are so satisfying, because of how clean your work is done and attention to detail. No better feeling than fixing issues after replacing old crusty parts with fresh ones! 😃 I’m putting Mantic Triple disk on Monday. I’m sad that it will be hidden, because the kit is a work of art!

@HasanMishima Год назад

The first time i twisted the nozzle all the way on my motorbike I laughed so hard tears came down my face! not sure why but fast vehicles make me hysterical with laughter 🤣🤣🤣

@andyavelar3300 Год назад

Love the fact that you make it seem so easy, every time I get to wrenching on my cars, it's straight pain and frustration! Still appreciate the detailed content 👌

@Texasknowhow Год назад

Tip when using the vacuum tube setup like you were on the tank - take a coat hanger or similar wire and tape the hose to it with some electrical tape. Leave about an inch of the hose longer than the end of the wire. Then you can move the hose around tons better holding the stiff wire. 😊

@iamgriff Год назад

If you had a long wire (coat hanger?) you could wrap it around that tubing on your vacuum. It would give you precise control getting the debris out of the tank. Also, that appears to be a tension bracket for a chainlink fence holding the fuel filter. Finally, are you planning on removing the aftermarket ground effect kit?

@sc3ku Год назад

Been following along with all of LSC’a videos while getting my 88 IROC going- their optimism, enthusiasm and occasional tricks have definitely made some tough jobs more bearable- almost enjoyable!

@Alps6408 Год назад

Making me want to go for a blast in my SL55 Alex... LSC is THE best and most informative car channel. Can't wait for the 1 million subscribers. Tempted for an LSC hoodie as It's getting cold in Florida....

@billjohnson717 Год назад

Makes me wanna do a blast and get a hooker

@donaldcolbert8317 Год назад

Wanted to get one of these C4's for a long time but watching you fight with the headers and how tight the engine bay is😬

@jrmason Год назад

Yeah Peter was a great addition to this channel! What a great pair of mechanics. Looks like a lot of fun (driving that is) Have a good one! -Jon

@WookieMonster01 Год назад

Peter with a huge smile doing a burn out at the end is my spirit animal

@Legit_Streetcar Год назад

🔝🔝🔝thanks! Appreciate your kind words Congratulations you've won yourself a Slot Text my TELEGRAM fan page now 🔝

@MrRadicalMoves Год назад

As someone who owns one of these Vetts, a common occurrence is for the engine to cut out under heavy acceleration and cornering when you get up to higher than stock performance levels. At 10:57, you can see that little baffle/tray... whatever you wish to call it... at the bottom of your tank. They have a very common problem where they like to come unstuck from the bottom of the tank and walk away from the pump. Yours looks to be intact, but, if you experience these symptoms in the future, that would be the first thing I would check. Because of the pickup placement the engine cutting out can happen with as much as half a tank of gas still in the car. Just something to keep in mind. This is actually something I am currently working on fixing with mine.

@EdgeOfPanic Год назад

@42:13 I have a weird car taste, Got a 1993 Renault 19 16v with a 2.0 16v low boost turbo setup and after almost 15 years of ownership still love the quirky French hot hatch to bits 🥰 Still can't believe what a lucky find this corvette is, a real diamond that just needed some TLC.

@ddevil4980 Год назад

I just want to see this car shined up and looking beautiful.

@glennscott3267 Год назад

All of you make me happy. i love the channel! From your working to get a car running from scratch to the expression on your wife's face feeling the stang really pull, it is just pure enjoyment for me. Thank you so much! I am stuck in bed for months, and your videos take me to Chicago and away from this place. BTW, riding a motorcycle is not worth the risk.

@bigdom1978 Год назад

One of Us!!! Joan Osborne!!! Already put it on my '90 playlist on Spotify haha thank for remembering me this song :)

@ScreamingSicilian70 Год назад

I always look forward to your Saturday videos. I'm impressed that you figured out it was a fuel sending unit. I'm even more impressed that it was that easy to take out! By the way, it was Joan Osborne that sang that song.🙂

@anandn333 Год назад

Everything is just loose in this car, you should just do a sweep over and check if everything else is tightened properly, but great video, I thoroughly enjoyed it. I am in hospital and this video put a Beeeeg smile on my face. Great job Alex, I can't wait to see the detailing video, go well brother 👊

@nickh8008 Год назад

I wish some stuff was loose on my or my customers cars ....everything in Wisconsin is horrible to get apart and rusty as hell and a nightmare!!! I could never work for flat rate in a salty state

@BoardwalkBullies Год назад

I'm glad it's not just Ford Vehicles that have a close to 100% failure rate when it comes to reman'd computers. The factory ones will typically outlast the car but remanufactured across the board typically blow no matter who does it. The junkyard is still the best place to shop, lol.

@arthurrose6473 Год назад

Just watched and subscribed after this sequence on this c4. Great job, and the look on your pals face driving it says it all! I'm happy for you and impressed with that car! Let me know if and when you want to sell it- I tuned in to your channel because I've recently been looking at c4's.

@LordHolley Год назад

I love this whole project series. But I have to say I think I would have detailed it 1st just so I was working on a clean car, but that's me. Defiantly looking forward to the detail video.....

@pittsburghshawn Год назад

Keep it up Alex, your videos rock. You and Peter are a great team. Always look forward to your new videos. Can't wait to see Ruby detailed with the new wheels and tires!

@Blaquer17 Год назад

It makes me so happy to see these older regular guy cars getting fixed and working again. I have an old New Edge mustang that could use some time and attention and this is making me want to get back to work.

@Loiyaboy Год назад

Love this channel! So much fun and informative content.

@sedrickwells8545 Год назад

Dude I really hate that I've been sleeping on your videos but you really get indept on fixing these videos and it's amazing the detail you go into to explain your repairs. I'm a reborn fan

@mavricxx Год назад

Damn, this Corvette has A LOT of issues but if anybody can get it running perfectly, it's you bro! Loving your videos, keep'em coming!

@johnsmith-ym3kx Год назад

Best videos ever!!! Lovin all the work that goes on and loving that's it's followed up with some HOONIN!!! Nice to see the LT1 gettin some love. I've got a 30th anniversary Z28 and i know the pains of working on it.

@ignacioromero5014 Год назад

You guys are great energy together, enjoy your videos thoroughly!!!

@BCNeil Год назад

they love each other very much

@mrrlucky3631 Год назад

I’m in Mechanic class. I watched ur vdo and learn a lot. Thank Alex. Watching from Cambodia 🇰🇭 it is 10:30pm now

@billjohnson717 Год назад

It's 1:17 here lucky

@jjasso75 Год назад

Great awesomeness video guys!!!The roller coaster ride with this vette has been totally worth it. You guys have a great chemistry and great comic relief. The randomness of your dialogue makes your video so very enjoyable. Keep up the great vids and episodes. Happy Thanksgiving to you guys!!!!

@jerrylwright9929 Год назад

Very nice! You guy woke that c4 up. Can’t wait to see it clean.

@viperocco Год назад

Nice work, especially on job on the fuel sending unit. Nice save!

@Bacon__SteezBurger Год назад

That was a hell of a roller coaster of an episode 😂 I can’t wait for that full detail though, and see how well it cleans up 😍 As always, stay awesome man! 🙌🏼

@carlyeremian Год назад

Every time I watch one of your videos I say, “this is the best build yet!!” Well, I’m saying it again, cannot wait to see it all cleaned up. What would it look like without that big body kit though. Something about the simple lines of a C4 corvette with nice wheels and tires….

@bobmanzi7712 Год назад

Great stuff guys thanks I'm glad to see you finally got it all sorted out the thing is a ripper

@rustyyoungblood6652 Год назад

Nice job You and Peter did on the Corvette. Can hardly wait or the detail video. Thanks for the fun.

@motheolebelo Год назад

awesome content Alex on the Corvette. looking forward to the detail video next.

@thomasrogers5229 Год назад

Its always nice to hear from previous owner...especially on a car that's been modded

@jimmyjamesgarage3290 Год назад

You guys literally saved that corvettes life! More cumbersome then the foxbody was... but appearing to pay off. Peters driving reaction is great! 👍 guys

@janamo70 Год назад

Verry happy with your fuel sending repair. my 85 corvette also has a problem with accuracy. I would never guess the yellow connector was hold from the back with a clip. You saved me a ton of stress. Thank you an keep up the good work!

@Legit_Streetcar Год назад

🔝🔝Thanks! Appreciate your kind words Congratulations you've won yourself a Gift Text me on Telegram fan page now 🔝

@Shantarias Год назад

Your videos are the only ones that I watch from start to finish!!! I giggle too when I drive something fast!!! Keep up the good work!

@2003cobramustang Год назад

This vette is growing on me i like it! Time and patience definitely for this car! Always look forward to your videos! Only thing wish this was a standard! Love burnouts!

@canuckchris5733 Год назад

You and Peter are a good time. Lots of laughs Watching Peter doing that burnout was awesome 😎

@DMichaels1980 Год назад

So much nostalgia on this car as a Chevy parts guy that got his start in the late 90s. Yes, our fuel filter brackets could have been better made from old erector sets. And all the Chicago mannerisms as a transplant to Will county almost makes me miss the city. I supply parts to the auction in Matteson if you're ever out this way.

@omegasupremez2832 Год назад

😁Man I love these videos dude your so blessed to come across this vette man I'm smiling ear to ear watching this!

@rayalo Год назад

Love the videos as well I really like your knowledge on how you find the problems on cars

@TomsProjects Год назад

Found your channel due to the fox body Mustang videos, and here I am glued to a series about a Vette! You guys are so good you put a huge smile on a Ford fan! Keep it up!

@AbbStar1989 Год назад

Love starting my day off work with a LegitStreetCar video. Thank you Alex for making my weekend that little bit better.

@berryboost5296 Год назад

My Supercharged Corvette Broke Again But Fixing It Made It Even Faster & I Found The Previous Owner!

@jcat96 Год назад

Title still not long enough, needs at least another paragraph 😂

@madmax82988 Год назад

Water is wet.

@mofomoco Год назад

Trees have feelings too

@borbebular9482 Год назад

@@madmax82988 lol you gotta be a sad ass dickhead of a person

@madmax82988 Год назад

@@borbebular9482 because water is wet? Keep crying

@ericrandall9194 Год назад

I love this channel. It’s like Saturday morning cartoons for adults. Love from Baltimore, MD

@samkurts1236 Год назад

I live in Baltimore Maryland myself man in sparrows point

@ericrandall9194 Год назад

I’m from Liberty Heights and Garrison Blvd, but now live in Westminster

@mattpfarr5992 Год назад

What up fellas , I’m in Bel Air

@ericrandall9194 Год назад

What up man!

@deon7743 Год назад

Your persistents is amazing! Thank you Sir🙌

@kokoeteetefia9545 Год назад

Peters smile is infectious, you make repairs look so simple, was, love from Nigeria🇳🇬

@joellopezjr5324 Год назад

“One of Us” by Joan Osborne….90’s nostalgia for sure. Love this channel; love these builds! Keep up the great work you guys!

@drewthornton7115 Год назад

From ‘95; you beat me to it 😂

@longjohn77 Год назад

Hate that song

@moamen300 Год назад

you guys are professionals, love your videos

@Lions7.62mm Год назад

Keep in mind the ECM drops out of closed loop in a sense because it will reset BLM/INT and not use o2 voltage signal anymore and just rely on the WOT tables for fueling. How about a dyno session before you detail it, and before you create an inspection window in the side of the block 🤣

@Legit_Streetcar Год назад

🔝🔝Thanks! Appreciate your kind words Congratulations you've won yourself a Gift Text me on Telegram fan page now 🔝

@OCDRex11 Год назад

I've never wanted to see a detailing video more than I want to with this Vette! Hate to say this has been my favorite but man, this is up there with the best on this channel! AND,..................... I am so glad I own an LS6 Vette, lol.

@Tsuchinoko Год назад

Can't wait to see the detailing!

@br549rdr Год назад

Enjoy watching you guys have so much fun while bringing back a American icon 💪

@ryanmurphy2711 Год назад

Love the level of detail you go into in these videos. Nice work mate.

@drackjapo Год назад

Looove the crazy-happy laugh from Peter... makes the day and makes me want to mess arround an old used auction C4 right away!!!!

@michaelallen2501 Год назад

I definitely would've taken the opportunity to upgrade to a set of long tube headers. It's a substantial gain in performance, through the entire rpm range.

@chriscreswell4793 Год назад

Why don't you buy him some?

@michaelallen2501 Год назад

@@chriscreswell4793 I bought some for my own LT1 car. He's got a successful RU-vid channel to the point of hiring staff. He can afford some lol.

@billjohnson717 Год назад

Michael Allen I would take this opportunity to shut your whore mouth and mind your own.

@michaelallen2501 Год назад

@@billjohnson717 who the fuck do you think you are lol? In what world are people defending the use of shorties?! Longtube headers are easily the best bang for buck modification anyone can make to a V8 engine. Considering it's boosted, they're easily worth over 30hp gained. But what do I know, I only have a 600hp 355 LT1 making the same 7psi they are. Their package is a cam, valve springs and headers away from making another 100hp. The fact they had them off and in their hands makes it even more of a 'no-brainer' decision.

@caleb7674 Год назад

That has to be the easiest fuel pump replacement setup in automotive history.

@Boga217 Год назад

Tons of German, Japanese, and Korean cars have a pop open cap under back seat, then a couple nuts or screw cap to the pump..not really uncommon to be easy to do. Even most under vehicle are pretty easy to drop tank.

@aok5680 Год назад

GM, W bodys have an easy access cover behind the back seat.

@billjohnson717 Год назад

@@Boga217 you trying to give a history lesson? Your a real Eli Whitney 😂

@Boga217 Год назад

@@billjohnson717 no just adding a few facts, if you don't he's going to call me a liar..then he'll be upset when I go type him lists of vehicles. It's RU-vid, you just gotta learn to put em down in 1 comment.

@caleb7674 Год назад

@@Boga217 I wouldn't call you a liar, but there's certainly much fewer steps in popping off a cover and zipping off a few bolts vs getting the car up on the lift or getting it on stands and sliding the creeper underneath to drop the tank and getting crap all over yourself and the floor. That doesn't really compare.

@Thirstygolfer Год назад

Enjoying this series very much! Are you getting a new Targa top as well?

@avioncamper Год назад

Hope you will have a top on the car for the detail. Congrats on the hard work. Peter adds a lot to the channel.

@thiefrules Год назад

Subbed, I cant wait to see more of Peter's antics in the shop

@Aiurasensei Год назад

Any requests in particular

@rauldobroni4172 Год назад

LOVE your videos and of posible make them longer 😊❤

@NONo443 Год назад

For the transmission, could you sucks most of the fluid up from the transmission dipstick to lessen the mess before dropping the pan?

@lawboy777 Год назад

I love the banter between you two - and also loved that old Joan Osborne song! Love the 90's references!

@fader2701 Год назад

that master brake reservoir looked like it was leaking.

@cidkplas Год назад

Fuel sending unit problems are my nemesis. Not knowing when i'm going to run out of gas is stressful AF.

@Boga217 Год назад

It's such a cheap easy fix, why not just fix it?

@cidkplas Год назад

@@Boga217 Some cars, like mine, use two fuel level sending units, if one goes bad you have to change both because it cuts the circuit. And replacement units are even worse quality, they don't even work properly brand new. Hard to trust when the fuel level goes crazy.

@Boga217 Год назад

@@cidkplas have you tried an oem

@cidkplas Год назад

@@Boga217 No choice to go aftermarket or used OEM, the part isn't available at the dealer or at stupidly high prices. I like my german cars but i'd like them to be easier to work on. I envy the simplicity of some US cars, really.

@Boga217 Год назад

@@cidkplas what kind of car?

@jimmyjardeen3146 Год назад

Awesome to see it going, btw what can you use to soak and break the bolts ?

@402SHO Год назад

Could we name the c4 “Marlin” or “ruby” keep the original owner’s name alive. Edit : that looks like fencing strap on the fuel filter I just had to fix my fence before winter 😂

@evang9708 Год назад

Would love to see more off-roading in the ml55amg, it would be interesting to see how it does with dual lockers.

@madmax82988 Год назад

And I want a toilet made out of solid gold but it's just not in the cards now is it?

@evang9708 Год назад

@@madmax82988 ?? Your comment seems pretty unnecessary.

@Aiurasensei Год назад

Maybe we could throw some Dodge Raider 4x4 in there too 😜

@AlexLTDLX Год назад

Neat video; a few small points - the brown o rings are typically Viton; you replaced them with black o rings which are most likely neoprene - the o rings you put in will fail quite soon, causing a leak and probably a fire. Neoprene doesn't do well with fuel (that's why injector o rings are always viton). The reason why your air fuel after start up was a little richer was because every pushrod V8 (in fact almost all engines) require an after start enrichment algorithm to add extra fuel immediately after start up for about 30 seconds; if you'd waited a bit you would've seen things normalize. Other than those two things, your videos are fun to watch.

@mcharleymiller1291 Год назад

U guys rock! I cant wait for the full detail.

@speedpig513 11 месяцев назад

the excitement at the test drive is contagious!!! love it!!!!

@philgrimsey3637 Год назад

Liking different stuff, to me is the sign of a true car guy. No myopic hatred of other stuff, just a true appreciation of anything with an engine and a throttle. Great stuff, mate.

@SuperSlimShady24 Год назад

Phenomenal job there guys….you did all the right things on this vehicle!!! Sweet find in great hands.

@tobyrussow9964 8 месяцев назад

C 3 was the longest Generation from 68 to 82 at 15 yrs. Just found your channel and I'm HOOKED !!! I'm more partial to Vetts but GM ALL the WAY !!! GREAT Vid. !!!