Nice one . You couldn't make it any clearer . Thanks . So many people on RU-vid just talk bollocks and never get to the point . Top man . Well done for not telling us your life story , well done for a good video .
thanks a lot. learned the basics now. Ive been out of the hobby for a few years.... things have changed! coming from single rotor and planes, now obsessed with getting into FPV
Matthew, thank you a whole bunch for posting this video for me i really wish every one on the bay was truly as good to deal with as you have been i will recommend you to all my flying buddys......peace out bud.
this the best explanation video I've ever seem, it's very easy to understand for the beginer like me!! Can you make another video to show how to conect all the esc speed controler to naze32? thanks
I understand the novelty of building a frame, but you have excellent components on the build and then a wood frame? Good video but man I wouldnt want that weight penalty
Could you make a video where you do this via CPPM? I have a turnigy 9x and would like to do this with CPPM but don't really know how , thanks, awsome video
I mean the actual connection to base flight and the first connection , I have downloaded base flight configurator but cant get any further than that ??? many thanks Scott .
I need s little help , I'm using a dx6 and now I want to ad a buzzer but I have aux1 Not in use on my reciever . I can't get aux 2 to move in cleanflight .can I use one of the wires that are left from the breakout cable for aux1 on the reciever?
I am a building my first quad. this is super helpful. I have one more question. My AR610 does not seem to have a power in port on the side like yours does. Does it draw power from the naze? where does the naze draw power from?
RC Flying Adventures Where does the naze get power from? do the ESCs power it? the diagram shows batt hook ups for an OSD but its unclear if there are dedicated power terminals. Again, sorry for all the questions. Brand new here
Does that 3 pin wire that is connecting the RX to the Naze32 come w/ the RX? I'm wondering if I need to purchase that separately/where to get one. Thanks.
Hi, I am a sub and I realy need your help!. I have a naze32 rev5 board I did the latest cleanflite update and soldered all the pins on but I do not have a clue on how to wire my frsky x8r rx or spectrum orange R615X rx for my spectrum dx8 tx I realy need your help please? davidringler40@yahoo.com
RC Flying Adventures hey can you help me ? I see you have to Orange colored wires that go from your Naze to your receiver. Does it matter what color those wires are ?
Hi I have the Afro ESC's for a quad I am building how do you rate them? also have you reloaded them with SimonK firmware or left them with the standard firmware? thanks for the video
I love Afro esc's I run 30amp ones on my QAV400 with stock software! And 20amp on my spider quad everything stock! The only thing I can say that you have to be careful with is if you solder the motor leads directly to the esc like I did in my QAV 400 build make sure not to heat the esc's to hot or you can ruin them! Good Luck!! :)
Does any one know how to connect the naze board to a devo 7 reciever I have tried every thing but nothing seems to work any suggestions on what could be the problem would be a great help???????
RC Flying Adventures yeah that was the problem. I set the throttle min. endpoint to 1100 and it wouldn't arm there, Bruce Simpson from RcModelReviews suggested the same thing. I set it as low as it went in my 9X radio 1082 and now it arms. You guys were right, this important detail should be in the manual.
