Nescafe DOLCE GUSTO Melody - Repair No power, no pump, working now - KP220 

Thank you so much. My machine had been broken for years and you helped me fix it in less than an hour. Great video

Your video is incredibly helpful. I have the same problem with magnetic sensor and I followed your guide to bypass this. My Dolce Gusto now works again. Many many thanksssssss !!!!

Thanks for the description of the operation of magnetic sensor, I have same issue but a later model with many more connections on the board - fortunately the white cable made identification easy

Man, your are the greatest the greatest the greatest - many many many thanks it is so simple and accurate with you

Very helpful! Thanks brother! 🇷🇴

Thank you very much sir .your video really helped me fix my dolce gusto machine ....keep up the good work and merry Christmas...

Thank you so much

Thanks for the great video…. My green light is in constantly with no flash. I’ve taken mine apart… and it looks like water has got inside! So I’m drying it out…. There is voltage from the two wires…. Pump isn’t working though. Hopefully when I dry it out…. It may once work again 🤞🏼🤞🏼

tks for the Tips, my problem was the magnetic switch.

Olá amigo !!

Adrian my coffee maker still doesnt pour water. What else could be?

What would the part number be for the magnetic sensor

Hi Adrian, Brilliant videos - thanks very much. One problem - I have a dead Piccolo XS EDG110. Pump, heater & switch seem to work OK individually when powered externally, and power arrives at PC board OK, brown cables to pump & heater are +238v. But no light on PC board, and nothing works when all connected up. I can't see a cable to any magnetic switch for the capsule-holder, but there is a cable (2 white leads) to a component in the heater. If I short the PC board pins for that cable, still no power to pump or heater. Black cable to heater top is +238v, white connector from PC board to pump is +138v. All 3 thermal fuses show 0 resistance so are OK. Does the Piccolo not have a magnetic switch for the capsule-holder? Perhaps the PC board is faulty, though no sign of burning, and capacitors aren't bulging. What do you think?

If my hold sensor sparked and made a loud clicking noise when touched with the screwdriver, would that suggest it’s very broken??

Hi sir, can u help? Where can I get pump fuse

hello friend, could you help? I watched your entire video, but as I'm Brazilian and don't understand your language, I was a little lost. I have a basic notion in electronics, I measured the components of my machine on this model and I didn't find anything shorted, especially the thermal fuses are good. My alloy pumps water, it just isn't heating up. The led is only flashing red, when measuring does not pass current to the resistance, however I connected it directly to the outlet and it is heating up. Could it be that sensor in the capsule that you jammed? If you can help I am immensely grateful! Thanks!

Czy będzie filmik o Daihatsu Ferozie

Awesome ! Stupid magnet, do you know where to find a replacement sensor ? I tried your way shorting it and yes the sensor is the problem.

brother greetings from venezuela, can you help me with my dolce gusto giving me some advice. it doesnt turn on the water pump, i turn it on and a red light is on and the stick i move it and the water pump you cant hear it. I disassemble, i tested the fuse is fine it has continuity. I bypass the water sensor, I disassemble the water pump clean it it was stuffy. i connect it direct to the electricity and you can hear it it turn on but in the machine no. what do i have to check? thank you

Can you help pleaseeeeeee