Netgear Router Recovery Rescue Fix Official

Подписаться 176 тыс.

Просмотров 31 тыс.

50% 1

In this video I show you: How to Rescue a Netgear Router in the event of a failure to boot. This is the official procedure recommended by Netgear to rescue the majority of Netgear routers after they fail to function. I used a Netgear R7000 Router in this video and I also tested this on a R7000P with success.
My channel / richardlloydusa
(paid links) As an Amazon and Ebay Associate I earn from qualifying purchases. This does not affect the price of the products to you and helps me to bring this content to you.
USB 3.0 Gigabit Ethernet LAN Network Adapter at Amazon(paid): amzn.to/45sWsME or eBay(paid): ebay.us/GN6Hrb
USB C to Ethernet Adapter for Laptop PC Gigabit Ethernet LAN at Amazon(paid): amzn.to/45ryK3n or eBay(paid): ebay.us/6fWVZz
PNY 500GB SDD Drive Used in This Video At Amazon(paid): amzn.to/3uQJZBz Or eBay(paid): ebay.us/LY2Unp
USB C to USB 3.0 Adapter [2 Pack] OTG Cable at Amazon(paid): amzn.to/3eThRZU or eBay(paid): ebay.us/khZocT
Sinstar USB C OTG Adapter, 2 in 1 USB-C Splitter at Amazon(paid): amzn.to/3DmsmOV
or eBay(paid): ebay.us/tFtmuJ
USB C to USB Adapter [2 Pack], JSAUX USB Type C Male to USB 3.0 Female OTG Cable At Amazon: amzn.to/3O7Kxui Or eBay: ebay.us/BIfcfr
TP-Link (Deco M9 Plus) Smart Hub & Whole Home Mesh WiFi System at Amazon: amzn.to/2FwivbV Or eBay: ebay.us/ICFPg5
TP-Link WiFi 6 AX3000 Smart WiFi Router (Archer AX50) At Amzon: amzn.to/3lVY3Fi or eBay: ebay.us/YCZfoB
TP-Link AC4000 Tri-Band WiFi Router (Archer A20) At Amzon: amzn.to/3wWAn8L eBay: ebay.us/CPCmiP
TP-Link AC1200 Gigabit WiFi Router (Archer A6 V3) At Amzon: amzn.to/3FOUv0a Ebay: ebay.us/fBXvdp
TP-Link Archer C90 AC1900 Dual-Band WiFi Router At Amzon: amzn.to/3z1J2tj Ebay: ebay.us/o2pUI4
TP-Link AC1750 Smart WiFi Router At Amazon: amzn.to/3lSVL9J Ebay: ebay.us/Xop74K
Seagate Portable 2TB External Hard Drive Portable HDD At Amazon: amzn.to/3LV5V4o or eBay: ebay.us/NuGtYn
Seagate Portable 1TB External Hard Drive At Amazon: amzn.to/2SzXCQw Or Ebay: ebay.us/xOFo8y
Toshiba Canvio 1.0 TB USB 3.0 Portable Hard Drive At Amazon amzn.to/2SEh0fd Or Ebay: ebay.us/i1d5k2
PNY 64GB Turbo Attaché 3 USB 3.0 Flash Drive (3-Pack) At Amazon: amzn.to/3zouF2z Or Ebay: ebay.us/WVQgoy
SanDisk 128GB 5-Pack Ultra Fit USB 3.1 Flash Drive (5x128GB) At Amazon: amzn.to/3PUC9jl Or Ebay: ebay.us/zpPBMf
SanDisk 256GB Ultra Fit USB 3.1 Flash Drive At Amazon: amzn.to/3x2jjzi Or Ebay: ebay.us/bBSxxS
SanDisk 512GB Ultra Fit USB 3.1 At Amazon: amzn.to/3N7I0A7 At eBay: ebay.us/Ex8fPa
iMBAPrice - RJ45 Network Cable Tester At Amazon: amzn.to/3a4Swtg Or eBay: ebay.us/NtvOE7
Cable Matters 5-Feet Cat6 Snagless Ethernet Patch Cable, Pack of 5 At Amazon: amzn.to/2gdUg5k At Ebay: ebay.us/TvrNsC
DD-WRT Third party firmware site: DD-WRT.com
65 Piece Homeowner's DIY Tool Kit At Amazon: amzn.to/3p65T1Q Or eBay: ebay.us/q3PIhf
Amazon Prime Membership 30 day free trial Sign Up: amzn.to/2P4uWQL
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Facing Cam: amzn.to/3DO285r Or eBay: ebay.us/mRAhf1
Lens: amzn.to/2Sj4S2G Or eBay ebay.us/CxnO3q
Lens Filter 77mm: amzn.to/3lX8W9Y Or eBay: ebay.us/VuIMLq
Overhead Cam: amzn.to/3aJp7Sk Or eBay: ebay.us/gD06li
Handheld cam: amzn.to/3aUa8W9 Or eBay: ebay.us/Cahldo
Video Editing Software: amzn.to/3iYTXv1 Or eBay: ebay.us/9yt6KM
Desktop Capture Device: amzn.to/3FHeHRA Or eBay: ebay.us/DYQFky
Mic: amzn.to/2KFj43r Or eBay: ebay.us/woUSis
Mic Wind Filter: amzn.to/2ScZdes Or eBay: amzn.to/2P7TYuA
Wind filter for handheld cam: amzn.to/2P7TYuA Or eBay: ebay.us/lFI2Aa
Selfiestick dslr: amzn.to/33IoiDW Or eBay: ebay.us/2x3ftc
Tool box: amzn.to/2E3r8dQ Or eBay: ebay.us/1mGaxM
Laptop stand: amzn.to/2MXA1HY Or eBay: ebay.us/I4UM2D
Studio mic: amzn.to/2Q2FO3w Or eBay: ebay.us/GYDr2g
Tripod Neewer Professional 61 inches: amzn.to/2VnotkL Or eBay: ebay.us/GG7Mgf
Lightweight Portable 66"/168cm Carbon Fiber Camera Tripod Monopod At Amazon: amzn.to/1rsQN5l Or eBay: ebay.us/d2q1RE
Tripod Neewer Alluminum Alloy 62": amzn.to/2LIbEwW Or eBay: ebay.us/bTVDLD
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Last update 06/15/2022
Netgear Router Recovery Rescue Fix Official

Хобби

Опубликовано:

14 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@livingthedream915 Год назад

a 30-30-30 reset fixed my AX1800 but your videos led me to the info I needed and now I know how to properly reflash it if it ever does brick itself again! Thank you for taking the time to make these videos!

@richardlloydusa Год назад

You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@livingthedream915 Год назад

@@richardlloydusa It's men like you that make the internet worthwhile, just don't every be one of those guys that leaves a reply like "PMed you the fix" on a dead forum for a niche tech problem LOL.

@richardlloydusa Год назад

I'm sticking primarily to RU-vid though forums do have some gold in them once in a while. Thanks again. All the best.👍😀

@BrianRichards88 Год назад

Thank you! This method fixed my wifi extender. After so many different methods that I tried

@figurefriends3379 Год назад

I know this video is a year Old, but you literally saved me at like 0400 in the morning. Thank you!

@richardlloydusa Год назад

@froznpopsicle1012 Год назад

This video saved me. Thank you!

@mikesmods317 Год назад

Awesome video, I’ll be attempting this later today with my R7450 router. Thanks for the video Richard

@mikesmods317 Год назад

Okay well I tried it, followed steps but no beans. My Netgear R7450 router has the white flashing led of death and when I plug an Ethernet cable into a lan port that ports led lights up dim white but then soon turns off. After changing the ipv4 settings to manual and entering the ip addresses exactly the same as you my router won’t respond to either IP address ping…. Any ideas? I’ve tried factory resetting it, same results

@richardlloydusa Год назад

Try this solution, it seems to work when all others fail: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@runnerlinux1474 2 года назад

Hello Teacher, Thank u for your effort and teaching💯

@richardlloydusa 2 года назад

You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@ceaseral-zubaidy5769 2 года назад

You are doing the hard and long way there is so much easier way and works 1000% I just got my netgear R6120 back to life

@richardlloydusa 2 года назад

So what's the easy way? I can't wait to hear. Thanks.

@richardlloydusa Год назад

Try this solution I discovered. It seems to work when others wont here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@TheGregWallace 2 года назад

Thank you for the Info.

@richardlloydusa 2 года назад

Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@TheGregWallace 2 года назад

@@richardlloydusa Your welcome, thank you for videos.

@jessewolford2354 Год назад

you are way too helpful this world does not deserve you

@richardlloydusa Год назад

Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@bigh3053 Год назад

Great video I was able to fix our netgear gaming modem. Although my firmware file was an img file not chk. Thank you

@richardlloydusa Год назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the valuable feedback. I now know it works with both types of files. I appreciate it greatly. All the best.👍😀

@minashiro182 Год назад

My R6260 don’t blink power led, just turns off after a few seconds. I made the same (ipv4 static and downloaded tftpd64 and the first version of the firmware and wait the 4 minutes as the page said) but my router still dead... any other idea to unbrick it? I tried to 30-30-30 and didn’t work...

@Cowardlyduck 2 года назад

Would be interested in a video on the alternate firmware you run. I was considering trying Tomato, but never bothered to do it yet.

@richardlloydusa 2 года назад

I'm running the latest beta version of DD-WRT v3.0-r49212 std (06/16/22) with pretty good result so far. It's a pretty fresh copy. You can see them here: download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/ Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@talismanicac 2 года назад

Hi Richard, nice explanation with all the detailing to the point. After recovery do you suggest upgrading FW manually 1 by 1 to latest version or its ok to directly put the latest file. (Sometimes auto update feature don't work on routers) PS: Waiting for your video on serial recovery.

@richardlloydusa 2 года назад

Will do. I actually found an alternative non-serial recovery. I will be posting that next. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@richardlloydusa 2 года назад

Here is the alternate recovery. It has already saved a router! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html

@talismanicac 2 года назад

@@richardlloydusa Thank you, will check it out

@xc2424 Год назад

Hi Richard, what happen is neither of the IP addresses work? Both CMD prompts failed to get anything back, after trying both addresses you call out in the video. I am trying to unbrick an XR500.

@richardlloydusa Год назад

Check out this video I made Netgear Router Recovery Hack Method : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html it seems to work when other methods do not. Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@hone_n_bone24 Год назад

At about 12 minutes in when you hooked the computer up to the router. When I did it, I got a solid amber light, not red. Am I still able to proceed?

@richardlloydusa 11 месяцев назад

Give it a shot and if it doesn't work try this alternate recovery that I made here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@jessekerr6286 Год назад

Hey Richard, ant chance you can make a video on unbricking a Nighthawk MR1100-100NAS? or point me to a procedure for doing it? I did a factory reset and something went wrong and it will not recognize any admin password and I cannot access the interface as a result.

@richardlloydusa Год назад

No sure what the rescue procedure for that device would be (I don't own one)but if this video didn't work try this rescue video I made here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html I also found this on it as well: community.netgear.com/t5/Mobile-Routers-Hotspots-Modems/Forced-Firmware-Update-on-MR1100-Bricked-the-hotspot/td-p/1861554 Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@Daten_IQ 2 года назад

Thanks for the explanation I have a router that does not work, can you help me?

@richardlloydusa 2 года назад

Which router do you have? I have many router rescue videos here: ru-vid.com/group/PLnxXRLSlmSVOlfKcSSQm8VeXKAN3-_urP Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@ahsanashfaque4086 Год назад

HI Richard i have the same issue i try to install openwrt into netgear R7200, I tried the same way you did, but my router lans ports also not working , please tell me what to do

@richardlloydusa Год назад

Try this rescue procedure: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html It seems to work when the "official" rescue does not. Don't worry too much about the IP address as the program does not really care. What I used in the video. Tell me if it worked. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@ahsanashfaque4086 Год назад

@@richardlloydusa sadly this method is also not working as router LANS ports not working, when i give final fix command in cmd to flash firmware it says wait for connection then show me error that ethernet cable unplugged

@ahsanashfaque4086 Год назад

I am only able to connect with router via ssh through wifi connection. is there any command to enable LANS ports ?

@richardlloydusa Год назад

I'm not aware of any such commands but if you have access through SSH then this may work for you: community.netgear.com/t5/Nighthawk-WiFi-Routers/Recover-a-bricked-netgear-R7000-through-serial-interface-and/td-p/2228043 If you can't do it with SSH try a serial recovery. I have never done it but you don't have much to lose at this point. Thank you again so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@talismanicac 2 года назад

Is it suggested to update fw 1 by 1 to latest or its ok to directly update to latest version?

@richardlloydusa 2 года назад

I usually do 3 revisions at a time but it's not necessary. You can go directly to the latest firmware without issue. I just like to see the evolution to the latest firmware. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@talismanicac 2 года назад

@@richardlloydusa thank you

@ceaseral-zubaidy5769 2 года назад

I Have Netgear R6120 I want up with you Instruction step by step but I can't get ping on both ip addresses you explained

@richardlloydusa 2 года назад

Looks like you got it handled. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@meangene67 Год назад

Any help with the dreaded "reset password loop" please?

@richardlloydusa Год назад

Have you tried the solution suggested in the video? Take a look at this solution as well: community.netgear.com/t5/Nighthawk-WiFi-Routers/R6700-has-endless-password-recovery-loop/m-p/1357445

@Diveman_JNR Год назад

Hi, when I downloaded the firmware from the Netgear website, the compressed (zipped) file consists of the Release Notes and the Disk Image File. I don’t see the chk file. Is there something I can do to get the chk file?

@richardlloydusa Год назад

Which router did you download this for? Thanks

@Diveman_JNR Год назад

@@richardlloydusa It is a Nighthawk AC2600 Smart Wifi Router

@richardlloydusa Год назад

It is an img file for sure just checked. Use it instead instead of the CHK file. Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@Diveman_JNR Год назад

@@richardlloydusa The process of putting all the files onto the router via the software didn’t work.

@richardlloydusa Год назад

Here are all my rescue videos for Netgear routers ru-vid.com/group/PLnxXRLSlmSVOc3OXtcDSIlfHHFr4VbuFQ Try the hack rescue method. Is your power light blinking and have you done a hard reset on the router by powering up the router and fully booting it then pressing the reset on the back with a tooth pick? Press it down for 7 seconds and release. Thanks.

@Gabo4516PR 2 года назад

what if when I pressed put nothing happened on the computer? and it says "Block #0"

@richardlloydusa 2 года назад

I have an alternate method here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html try this and see what happens. I have rescued three of my own routers with it and one of my viewers had success when this method failed too. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@alphaomega5017 2 года назад

How can we do the same thing on a Mac computer

@richardlloydusa 2 года назад

Sorry I don't have a Mac to make a video on that (might have to buy one) but there is TFTP server software available for Mac www.intuitibits.com/2019/06/01/transfer-tftp-server/#:~:text=Transfer%20is%20a%20reliable%20and,or%20to%20a%20remote%20server and the network configuration would be the same on the Mac as far as what you need to modify. Give it a shot and tell me how it went.

@illumify1932 2 года назад

When i plug in the cable it doesn't light up, any help please??

@richardlloydusa 2 года назад

You could have a bad cable, bad port or bad network card on your computer or any combination or all problems at once. Check the cable first or just try another then try a different port on the router (even the WAN port if not of the others work) then try a different computer too. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@grizwigs7781 Год назад

What do I do if the command says request timed out?

@richardlloydusa Год назад

Great that you asked. I have found that this new solution I found works when others do do not, try it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@S-I-R-E 2 года назад

Hello, I have a TP-LINK ARCHER C6 V2 (US) and I flashed OpenWRT custom firmware on it since the stock firmware took too long to log into my PPPoE profile. I did that successfully but the custom firmware limited my wireless speeds by 50% for some reason and so here I made the mistake of trying to flash the stock firmware back directly from OpenWRT and my router is now completely bricked, it does boot loop or anything like that but the power LED stays on. It does power on but does not output any IP address. I have tried a couple of your previous videos made in 2015, 2018, and 2019 but nothing seems to work. TFTPD does not pick a log from the router as I suspect the custom firmware completely wiped the previous recovery methods. Watching a couple of videos on youtube indicates that I can use a TTL CP2102 module to directly connect to the router but I do not know how to do so. I have purchased said module. If you could please make a tutorial on how to fix my router model, I'd be extremely grateful. The router is in good condition and I do not want to buy another one yet. Please help me if you can. THANK YOU IN ADVANCE.

@richardlloydusa 2 года назад

I have a video on how to serial recover an Archer C9 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fme7kwTkttk.html but I don't think it's compatible with the C6 but at least you can see how to get it all set up and the mechanics of the procedure. OpenWRT has a page with a debrick with serial here openwrt.org/toh/tp-link/archer_c6_v2 which may help. I don't have a C6 or I would experiment with it. Thank you so much for watching and commenting. I appreciate it greatly. Good luck. All the best.👍😀

@S-I-R-E 2 года назад

@@richardlloydusa Hello, thank you for the response. I have already watched pretty much all of the de-bricking videos you have made for a TP-Link router including the Archer C9, and although I can follow your steps very easily as your videos are remarkably descriptive and easy to follow my router being the US version has different commands for recovery and the guide on OpenWRT is really brief, presumably for people who are already well experienced in dealing with such issues. I appreciate you sourcing the link for me, I hope I can fix my router. Thanks 🙂

@richardlloydusa 2 года назад

You're most welcome. I hope you can save it too. Tell me how it goes for you. Thanks again for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@joseluna-santos475 11 месяцев назад

I need help. On mine I did everything yiu said but it just says block #0

@richardlloydusa 11 месяцев назад

Try this method I found in this video instead: www.youtube.com/@davidopsahl1935 Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@joseluna-santos475 11 месяцев назад

@@richardlloydusa I got it to work. I manually reboot system then ping on all the Joan’s still nothing so I tried the ping thru WiFi. It wasn’t bricked. Some how the ip ádrese from the vpn I delete it causes all ip to be the same so I had no lan but WiFi was working. I don’t know if that makes sense but that is what I dealt with.

@richardlloydusa 11 месяцев назад

Awesome! Thanks again.

@JoseRamirez-ti8ki Год назад

Hey bud, would I be able to use a usb cable instead?

@JoseRamirez-ti8ki Год назад

Ok I got the adapter as you didn’t reply… I got to the cmd promt and cannot ping neither IP, what’s next?

@JoseRamirez-ti8ki Год назад

It would be great help if you would reply to questions.

@OutdoorMore1 Год назад

I keep getting dos attack rsp scan when I look up the ip address it’s from legit company like google or Facebook so how do I prevent it coming up like that

@richardlloydusa Год назад

Which firmware are you running? I believe there was a defective firmware that was false reporting a DOS attack. Try upgrading to the latest firmware. Tell me how it goes. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@OutdoorMore1 Год назад

@@richardlloydusa I have the newest update but it seems to be at. 7 and 8 every thing goes down

@richardlloydusa Год назад

Is it well ventilated? It may be overheating. Have you tried the third party firmware DD-WRT? It works great on my R7000. I will be making a video on upgrading to DD-WRT on an R7000 in the future. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@nan0mech 11 месяцев назад

i dont think its working when i clicked the PUT butron, its stuck on block#0

@nan0mech 11 месяцев назад

i have a r6120 with a .img file

@richardlloydusa 11 месяцев назад

Try this alternative method I found that works very well here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@Gabo4516PR 2 года назад

I don't get a reply on any of the IP addresses, any other I could try?

@richardlloydusa 2 года назад

I'm going to post an alternate non-serial method I found and perhaps that will work for you. Stay tuned. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@richardlloydusa 2 года назад

@Gabo4516PR 2 года назад

nah it didn't worked for me, I did all to the perfection but when I pressed "Put" it says "block #0" and anything happened

@richardlloydusa 2 года назад

Strange that you think so. It's been pretty good for me. I mostly use third party firmware called DD-WRT and it's been pretty solid. I suspect you are using the stock firmware that I have heard is not the best. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@pankajbhatti87 Год назад

but sir in my case only power light is on. and router is same condition

@richardlloydusa Год назад

Try this solution instead: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html it seems to work when nothing else will. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@pankajbhatti87 Год назад

but sir i have huawei hg8145v ont router and not found firmware in internet of this router

@richardlloydusa Год назад

Understood. This solution is for Netgear routers only. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@84Parker84 Год назад

I tried to reset my netgear nighthawk xr500 admin password by doing three factory resets. I did it by holding the reset but 7 seconds. The admin password didn't reset to factory settings. I need help

@richardlloydusa Год назад

I may have the solution. Check out this video I made: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html It seems to to work when nothing else will. Give it a shot and tell me how it went please. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@ceaseral-zubaidy5769 2 года назад

I need your help please I be more then happy to bring my router back to life

@richardlloydusa 2 года назад

Looks like you got it handled. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@jerinmathew1226 Год назад

Block 0 error😊

@richardlloydusa Год назад

Try this method instead. People seem to have more success with it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@jerinmathew1226 Год назад

Teied MNRPFLASH ALREADY, But this is not compatible with x64 systems

@richardlloydusa Год назад

Try this method: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html That video was made on an X86 Windows 10 system. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀

@user-qc6yq1jh4j Год назад

stop with the blabing and get straight to the recovery process

@Letsgobrandon-h7w 2 года назад

Had that same router it was the biggest peace of junk waist of money.

@richardlloydusa 2 года назад

I have not had any real issues with it (other than the ones I created) but I have not run the stock firmware very long. I have heard complaints about the stock firmware perhaps that's what you were running. I run third party firmware (DD-WRT) on it with pretty good results. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@Edgar323 10 месяцев назад

Im getting an error “server stops the transfer.Error #2: Access”. Any help would be appreciated 🫨

@richardlloydusa 10 месяцев назад

I have another video that seems to work on Netgear routers when everything else fails. Here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hXhMgQS5k1o.html give it a shot. It's the only method I use now. Please update me on how it went. Thank you so much for commenting and watching. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀