Never seen before woodturning footage 

Awsome to hear that,thank you very much

Thank you,glad to hear that

Thanks Richard, that means a lot coming from you ☺️

No problem, Thank you for watching 😀

Thanks Richard, I really appriciate that ☺️

Thank you very much,greetings from Zagreb

Awsome to hear that...thank you for watching

Thank you

Thank you Mike, thanks for watching and comment

There seems to be an argument over carbides wether they are cutters or scrapers.Scrapers need a burr to scrape cutters need a bevel to cut ,you can’t get a burr on a carbide tool but they do have a bevel.Many thanks for all the info and this close up video really does make everything clear.Please make more of these.

Yes your right. I normally use my skew for spiral work. 😂

Trust me, You will after all that practice reach a point where you can hold on to a catch or prevent it or control it... And it will be aha moment.... Just don't give up 😉

Thanks sir😉

Thank you,glad to hear that ☺️

Awsome to hear that Randy, I'm honored... Thank you very much

THANK YOU,glad to hear that ☺️

No worries, thank You for watching

Thank you very much

You are correct,all the above,its how it feel,sounds when you do work on the lathe as much as seeing... Thank you very much for kind words 🤗

Thank you Mark, I really appriciate your kind words and thanks for taking time to watch my videos 🤗

Hi Greg, yes ofcourse share my videos with your studends, I'll be honored... Glad you like Croatia,😉 you pick good cities to visit😀. I do hope to get invited to demostrate or teach around the world, and my wish is to visit Australia so hopefully one day sir... Thank you very much for kind words and support and time you took to watch my videos 🤗

No worries, Thank you sir for taking time to watch my videos 🤗

Thank You, its nice to hear that ☺️

Awsome, I appriciate your support and time you took to watch my videos 🤗 Thank you

Thank you Valerie☺️

Thanks Joris😉

Thank You for watching

Thank you very much

Thank you Rob, glad to hear you like video☺️

No problem, thank you sir for kind words and support

Hi sir, I have heard about this burnishing and that you have to remove it before sanding, however I never had issue sanding right after nice clean burnish cut.... And no matter how light the touch is it will Always leave shiny surface.... Mostly of speed that we use to cut wood...you can achive similar by using knife to cut with the grain, it will leave shiny surface.... So I'm not to bothered with that and if your pressure is to high on wood , wood will tell you that.... I was tough that way, wood always fight if you do it wrong. I will do body movement video soon😉 there is a lot of request for that.... I always joke around that we dance a lot around the lathe. I polished skew gouge with like 1000 grit wet and dry, I didn't spend much time on it as I didn't notice any differnce.... And I always use skew or this skew gouge without honing,so straight from grinder.... Works for me but I know a lot of turners hone which is ok if they like it.... That is beauty of turning....we each have different way😉

With the skew, I thought I had solved my problems with clean cuts when I got a 1000 grit CBN wheel. I noticed that it would cut pretty good in one direction, like left to right, but not in the other direction. This was when I discovered stropping, and I think that came from Eric Lofstrom. With honing, you will leave a burr. With stropping with polishing compounds, you remove that burr. When you sharpen your kitchen knives, if you don't remove the burr, they don't cut very well, and every sharpening video will tell you that. I found out it makes a big difference. Eric took his skew and dulled it on the lathe bed, sharpened it on a 60 grit CBN wheel, and then stropped it. It took the hair off of his arm in one pass. When I started stropping, my shew cut fine in both directions, or at least equally well, I generally strop on my Tormek. You can buy 'polishing' compounds at the local big box hardware stores. If you get the black stuff, I think it is about 800 grit which does a good job. No clue as to what the Tormek paste is. I just use a piece of plywood, put a little light machine oil on it, and then rub some polishing compound on it. The old timers with the carbon steel skews would keep an end grain stump of some what softer wood around and stick the skew into it once or twice and that generally removed the burr. The burr from the more modern metals is more difficult to remove. One guy from England, I think his channel is Face Edge woodworking, he sharpens his bench chisels and plane irons on a Norton India stone, which I think is 400 grit, strops the blade, and then gets paper thin shavings with it. I don't think grit is as important as stropping. I have one stone which is 30,000 grit, and there is still a tiny burr left on it. I seldom use it though. Every one is different. In "theory" you should be able to get the same surface with both the skew and the spindle gouge. Stropping the flute may make a big difference. I am one who is blessed or cursed with having to experiment. I blame it on my dad who was an engineer...... If it ain't broke, take it apart and fix it anyway!

@@robohippy we would also strop bench chisels as you use power of body and arms but never turning tools as we have power of the lathe.... Again I never got issue going left to right or vise versa, usually burr will be gone in few seconds on the lathe with skew , and we did do endgrain trick to remove burr but I find it just another step that is not nessesary,for me atleast.... Again I don't have issue with this but if it works for someone else then by all means do it.... There is no ONE correct way to do this👍

Thank you very much 😀

No problem,thank You for taking time to watch my videos 🤗

Awsome to hear that ☺️ thank you

😂😂 hi Greg, thanks for watching and kind words, I really appriciate that... 30 years of turning, woow, I still have a way to go😉 Also like you I have never had one of those catches, but I have heard of those,😅🤔.

Thank you 😀

Thank you sir, I really appriciate that ☺️

Awsome, thank you sir

Thank you sir, great channel you have as well... Thanks for watching

Its all down to practice ☺️

Thank you😀

Thank you for feedback, glad you liked it 🤗

Thank you soo much ☺️

Thank you,glad to hear you like it

So glad to hear that it helped, That was the point of the videos, thank You for watching and support what I do

Nema frke Sara👍

Thank you Wayne, just take your time with sharpening easiest way is to use platform but what ever method you use just take your time and practice.... practice is everything ☺️

Glad to help out ☺️ thank you for watching

Awsome to hear that, thank you very much

Thank you sir

Awsome to hear that 🤗 thanks for watching

I see, that is great suggestion... I'll see what I can do... Thank you 👍

Thank you very much,I really appriciate that ☺️

Glad to hear about transition to tradicional tools as once you learn them you will have more fun... Take your time and just practice ☺️

Awsome to hear that ☺️ thank you

Thank you

Thank YOU sir very much 🤗

Thank you sir 😀

Thank you, I have several videos in last 2 months on this tool.... And one how I made it as well😉

Thank You very much 🤗

Awsome to hear that, that is the point of the video🤗

Thank you sir very much for kind donation and support, can't tell you how much I appriciate that ☺️

I understand, I'll do a video on dancing with body around the lathe😂 thank you for watching and suggestion for video

@@tomislavtomasicwoodturning That would be great.

Don't be afraid like your instructor as 99% its safe and only ruins wood.... You can use a point of the skew only for V groove or endgrain cuts, I have indepth 2 part videos about 2 months old that csn help you learn the skew....