Тёмный

NEW 2023 Microwave Blind Spot System By TadiBrothers 

TadiBrothers.com
Подписаться 3,6 тыс.
Просмотров 27 тыс.
50% 1

2023 Microwave Blind Spot System (Premium)
SKU55799
If you want safety this is a must have system. It uses microwave technology to detect any car that is in your blindspot. It detects the lane on your left and right side, so you have full coverage. Before you change lanes this system will let you know if it is safe to do so, the system will alert you by a small blinking luminescent light and a speaker. You can always turn the system off if you do not want it active.
Microwave detects small obstacles starting starting from 8-15m away, and big obstacles starting from 20m
if you don't react to the blinking LED light, the speaker will beep 3 times as a percussion.
THe speaker can be deactivated if you wish.
The blind spot detection system also consists of microwave two sensors, one in each side of the back bumper that will detect items in your blind spot.
Many high end vehicles such as the Mercedes Benz S Class and Volvo vehicles have this Blind Spot detection system. It is the future of driving safety. You will always know your surroundings.
Click below for more information or to purchase this product:
Microwave Blind Spot System (Premium)
SKU55799
www.tadibrothers.com/products...
TIP: please bench test everything before installation, it will give you a better understanding of how the system operates, in addition to making the installation significantly cleaner and faster.
For more information or assistance on buying this product
please don't hesitate to call us at 866-966-5550 or go to www.tadibrothers.com/

Авто/Мото

Опубликовано:

 

4 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 21   
@whittywillshine
@whittywillshine 5 месяцев назад
Will this work on metal bumpers? 1969 Oldsmobile 442
@rightright6582
@rightright6582 5 месяцев назад
i did not see a real life test, could u do one in the future, thanks
@petesera3091
@petesera3091 5 месяцев назад
So you would need to mount the radars outside the vehicle and run the wires to the front and install the lights somewhere on the door panels? Doesnt look like the harness is long enough to accomplish this, do you sell extention wires?
@kiesha104
@kiesha104 7 месяцев назад
Do these work behing a fiberglass bumper?? IE C3 corvette...
@wanderpete9904
@wanderpete9904 11 месяцев назад
I installed this system. I noticed when changing lane on the left it makes a beep and flashing led lights while a vehicle is approching which is a cool feature but if i change lane on the right with indicators ON it does not beep and flash the led lights when a vehicle approches , does this feature only occurs on one side?
@Tadibrothers
@Tadibrothers 11 месяцев назад
If you purchased this system from us, it should beep on both sides. There might be something with the trigger wires that was not connected properly. Please call our service department tomorrow and they will help find the problem.
@ot2325
@ot2325 8 месяцев назад
Is it 24 hz or 77 hz?
@jefflindamood9050
@jefflindamood9050 Год назад
does it go through metal, have a metal truck and bumper
@Tadibrothers
@Tadibrothers Год назад
Hi, it will not go through metal but you in that case you would skip using the bumper and put it on the quarter panel
@johnformes7448
@johnformes7448 Год назад
How/where do you mount the lights?
@Tadibrothers
@Tadibrothers Год назад
The back of the LED indicator has 3m tape. We have seen people also use Velcro and it comes out very nice 😊
@kellynelson4733
@kellynelson4733 Год назад
Assuming you are talking about plastic bumpers. Will this work on a vehicle with a metal bumper?
@Tadibrothers
@Tadibrothers Год назад
Yes, you can also put it on the side panel of the vehicle BEFORE the bumper
@BillRatliffIV
@BillRatliffIV Год назад
@@Tadibrothers ​​So if I have a Ranch Hand steel bumper on my truck, I would need to mount inside the panel toward the rear of the truck bed, are you saying it will still work through the metal truck bed side panel?
@KaushikThakkar
@KaushikThakkar Год назад
Do you have a video on how to install this on the car. I have a Prius prime 2017
@Tadibrothers
@Tadibrothers Год назад
We’re working on getting a few videos onto the channel of how it is installed in sedans, we will try to get a Prius in there as well.
@waynespicer89
@waynespicer89 Год назад
Price ?
@Tadibrothers
@Tadibrothers Год назад
Hi, its $499.99
@sanghyunlee809
@sanghyunlee809 9 месяцев назад
The harness indicator components are both female where the indicator extension components are both female as well therefore 2 adaptors with male components at both ends is needed otherwise a replacement of the harness is required to resolve the issue Be sure to include the pictures we took of the problem & that should be clearly understood altogether
@ardoholt2063
@ardoholt2063 10 месяцев назад
I want to mount this on my motorhome, it is 40ft long . the connections don't look to be long enough to reach. How can this item be used on a motorhome?
@BloomfieldProductions
@BloomfieldProductions 9 месяцев назад
Extend the wires using solder
Далее
How does Blind Spot Monitoring work in Toyota cars
13:40
ТЫ С ДРУГОМ В ДЕТСТВЕ😂#shorts
01:00
BSS1LPB The Bar in Blind Spot Detection
2:49
Просмотров 14 тыс.
#стант #на альфе
0:39
Просмотров 579 тыс.
Manual installation process of highway guardrail
0:15
Küçük Çalışmalar
1:00
Просмотров 1,5 млн