NEW DOOR? NO! I’ll fix it using PDR

Подписаться 123 тыс.

Просмотров 1,2 млн

50% 1

Check out my other rear door repair I did on this Blue VW Polo: • HOW TO REMOVE A DENT L...
This was a real challenging dent to do as there were several areas of damage on this door, the main impact crease had stretched the metal and caused the frame edge to twist slightly. It was also a challenge to get it finished in time as the sun was setting fast, so some of the last shots were getting a bit dark!
I hope you enjoy it and maybe learn a thing or two from watching it.
Filmed & edited by Jake Quintin
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
www.1sttrackdents.co.uk
See you in the next video soon!
-----------------------------------------------
► Tools & Equipment I Use:
• Glue Remover (99.9% Isopropl Alcohol Liquid Cleaner) geni.us/Alcoho...
• Bosch Glue Gun - geni.us/glue_gun
• Portable Glue Gun - geni.us/Cordless
• Dewalt Heat Gun - geni.us/heat-gun
• Infrared Temperature Gun - geni.us/Laser-...
• A-1 Tools - www.pdrtool.com
• 24” Softtip Double Bend - www.ultradenttools.com
• A44 7/16" 6-pc tip set and tip holder- www.ultradenttools.com
• Aluminium Knock Down - www.pdrprotools...
-----------------------------------------------
► HEALTH & SAFETY!:
• Ear Plugs - geni.us/ear_plugs
• Safety Gloves - geni.us/workgl...
• My Favourite Safety Glasses - geni.us/eyepro...
-----------------------------------------------
► Polishing Equipment/Consumables I Use:
• 3M Fast Cut Polish(Cutting Compound) - geni.us/compound
• 3M 02085 Trizact Hookit 6 P3000 Grit Foam Disc by Trizact - geni.us/trizact
• 3M Fast Cut Polishing Mop Head - amzn.to/36GisoY
• 3M Ultra Fine (Fine Polish) - geni.us/ultrafine
• 3M Ultra Fine Polishing Mop Head - geni.us/ultraf...
• BEST POLISHING COMBO! geni.us/polish...
-----------------------------------------------
► My Studio & Camera Gear Set Up:
• MAIN CAMERA: geni.us/bestca...
• Main Microphone - geni.us/bestmic
• BEST WIRELESS MIC - geni.us/bestwi...
• Lavalier Microphone - geni.us/lapelmic
• Studio Lights - geni.us/studio...
• Tripod - geni.us/everyd...
• Small Tripod - geni.us/flexib...
• Camera Gimbal (Updated version) - geni.us/mystea...
Note: Commissions may be earned from the links above.

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,6 тыс.

@1st_track_dents 5 лет назад

Another VW Polo rear door repair. Honestly, I do work on other makes and models too!

@Cripinub1 5 лет назад

1st Track Dents hi mate, are you the north London guy? I wanted to use you in summer and you was injured, still need you to work on something for me! Got a m3 you could probably use in you next video? Give me a shout if you available, cheers

@1st_track_dents 5 лет назад

Hi Cripinub1, the best thing would be to e-mail me all the details, including photos/videos of the damage and I will e-mail you back. All the best Jake.

@thefaceman457 5 лет назад

Amazing, where about are you, just in case i need you

@1st_track_dents 5 лет назад

@@thefaceman457 Thanks, I'm based in St Albans, Hertfordshire.

@thefaceman457 5 лет назад

How did you learn to do that, was you already a panel beater, can tell from the work you was not chips away. god there crap

@constantlyconfused8660 5 лет назад

You demonstrated a level of panel beating skill that I thought was long dead in this disposable world - shame there are not more professionals with your level of skill and commitment to your craft

@Tyler-kw9ce 4 года назад

Problem isn't lack of skill. I'm a PDR tech myself and I specialize in hail damage. I know many very highly skilled techs. The problem is the insurance companies don't want to pay us what we are worth. They beat us up on price every step of the way. Most severe repairs simply aren't worth our time for what they want to pay. Just my 2 cents.

@WeldersOnly 4 года назад

@@Tyler-kw9ce A job like this I'd tell them I wasnt able to PDR it and it had to be skinned and painted, if you owned the body shop... I guess that'd be insurance fraud lol.

@steverx4460 4 года назад

Most of the repairs that I've seen are where they'd just get a new or even good condition secondhand door and repaint it. In Australia, the insurance companies dictate how much they will pay.

@terencejay8845 4 года назад

@@steverx4460 That's exactly what I did on my Golf. Used door, exact paint colour.

@KRAZEEIZATION 4 года назад

One hell of a crash guy!

@yumpinyiminy963 4 года назад

Nice work. I had a door ding in one of my doors on my 3 week old new car. The dealer wanted to pull it out then bondo and repaint the door for almost $1000 USD. They were nice enough to give me the number of the Ding Doctor. DD cam to my house, used a light and heat gun like you. He then got a little hammer head on a long shaft through an access plug on the door. 20 minutes and $100 it looked perfect. This is a great talent.

@jimwheeler6094 5 лет назад

Wow, that's incredible! I never would have thought that those results were possible. This guy is a magician!

@phil-zz5hk 4 года назад

no just a well trained panel beater . like me he was probably trained by an old school panel beater paint sprayer . god i miss my old dolly lol

@phil-zz5hk 4 года назад

a dolly is a steel block with different angled edges . different dollies for different situations .

@chello70 4 года назад

Jim Wheeler 😂

@phil-zz5hk 4 года назад

@John Jakobsen before the invention of cheap panels we where all capable of doing this work . back in the 70s and 80s we had no choice . that is why we are called paint sprayers panel beaters . rolls royce cars used to have lead as filler . cheap spares have taken the art out of the game .

@sia.b6184 3 года назад

look up the term "ketok magic" its actaully the term used in Indonesia when a person can bring a panel back to its original form :)

@michaelpiotrowicz6100 4 года назад

Thanks for sharing. My young son dented a door on my beloved old Saab the other day and what I learnt watching a couple of your videos let me fix it near to perfectly, using improvised tools, so that no one had to feel so bad. Thanks.

@rycallter3372 4 года назад

What kind of improvised tools did you use? I'm thinking about making my own tools as well.

@michaelpiotrowicz6100 4 года назад

@@rycallter3372 I turned domes onto some nylon round stock

@MrEvilWasp 4 года назад

You must have the patience of a saint to fix dents like that. Peace

@johnaverick7468 4 года назад

A lot of man hours that he doesn't mention. And a boat load of PATIENCE ! You have to be a certain type of person for this type of work.

@Guy4UnderDog 4 года назад

@@johnaverick7468 OTH, no junked door, no paint, no new door. This method should get tax breaks for being eco-friendly. Plus it's a job Creator not job destroyer.

@robhughes8516 4 года назад

John Averick you don’t have to be a certain type of person for any work, you just decide it’s what you want to do and you put in the time necessary to learn it, no secrets, no magic, no genetic predisposition needed, just the requisite time put into learning and practice, it’s not brain surgery.

@DentZero123 4 года назад

He is one of the best

@kevinJust 4 года назад

It just me or did we want to see the owner's reaction to the repair.

@TheRitmosalsa 4 года назад

Is only u we dont care 😊😊😊

@bobsmithinson2050 4 года назад

TheRitmosalsa You can’t speak for everyone. I’d care to see an owners reaction as well.

@TheRitmosalsa 4 года назад

@@bobsmithinson2050 😅😅😅😅 was just kidding. It looks good like good u know what i mean😅😅😅😅

@qwadratix 4 года назад

I was going to comment - but I see that all the superlatives have already been used up. There's nothing left I can use to express my admiration.

@a17des 4 года назад

As an ex panel beater I can tell you that was an amazing repair without stretching the panel.Well done Sir.

@mattmanslim 2 года назад

Incredible repair. I think the one thing many people overlook between repair with PDR vs new panel is that even though you're reworking a panel and may not be able to get it to 100%, how it looks visually may be substantially better than a new panel that has to be colour matched, blended, aligned etc. You've managed to save a part and bring it in-line with the condition of the rest of the car, which is the biggest win, in my books.

@1st_track_dents 2 года назад

Thank you very much for your comment. I couldn't agree more, it's always worth saving a panel if you can. 👍

@gallupcustomknives2293 4 года назад

Amazing! I’ve straightened some pretty rough panels, and gotten to the point of just needing a 1mm skim of filler, but never retained the original paint. You sir have a gift!

@uckedinhats Год назад

Filler really ??? .001 of your scale maybe closer to the facts.

@gallupcustomknives2293 Год назад

@@uckedinhats I don’t understand what you mean

@austinbartose6527 4 года назад

That’s incredible! Thanks for the skilled demonstration. Something tells me you make this look far easier than it is.

@stewarthumphreys8960 3 года назад

Considering the complex damage of that rear door you did a cracking job repairing it.. well done matey

@1st_track_dents 3 года назад

Many thanks Stewart 👍

@jonnychooch6624 4 года назад

level of skill is nothing short of top tier. just wrecked but the intense music tracks

@mybluebelly 4 года назад

Wow you must be really annoyed at a LOT of RU-vid videos if you take the music so personal. personally, i just roll with it and get on with my life. You should try it once.

@K22MDL 4 года назад

I agree, It's not required. Yanimizzzzzzzzze has a lot to answer for. Idiot.

@jonnychooch6624 4 года назад

@@mybluebelly nope not at all. however the music at times overwhelms what he has to say. good day.

@gdfggggg 4 года назад

mybluebelly You gotta roll with it, ya gotta take yer time, you gotta say what you say, don’t let anybody get in your waaaaaay...

@ronaldspencer547 4 года назад

10% tools 90% craftsmanship.

@tarassu 4 года назад

9% tools and 1% electricity for that light.

@kashkash9886 4 года назад

You gave the tool's way to much credit.

@dominikhofmann603 3 года назад

more like 100% dark magic

@axa.axa. 5 лет назад

sometimes when i watch these PDR videos i wonder if playback is in reverse

@mymatemartin 4 года назад

First time I've watched panel work being done. An amazing example of professional skill and commitment to your customers.

@escort402 5 лет назад

Sir you are blessed with good hands and wonderful skill. It's great to see you back on RU-vid 👍😎😉🇬🇧

@Thirst_TV 4 года назад

Nice video, nice info, nice music, tools listed... 10/10!

@geddonmeansome9834 5 лет назад

I've seen this guy before, he has got to be one of the top PER professionals.AMAZING work.

@jiwbink 4 года назад

NOT SURE HOW I GOT HERE,BUT VERY GLAD I DID. I'VE NEVER SEEN OR EVEN HEARD OF YOU OR YOUR CHANNEL. I'VE GOT TO SAY THAT YOU ARE A VERY TALENTED ARTISAN -A TRUE CREDIT TO YOUR TRADE! I WISH THERE WERE MORE HALF AS GOOD AS YOU APPEAR!! EXCELLENT JOB,WELL DONE!

@johnkimmel2612 5 лет назад

Wow! Determination and skill went a long way. I would have liked to see the face on your customer at the finished product.

@choose2vibe 6 месяцев назад

Fantastic! Had the same dent (a bit worse, up near the handle). Ridiculous dealer and local shop prices to repair or replace (now I see why). Now 5yrs later, just scored a door from junkyard. You sir are patient and amazing at your skill.

@mohsinniazi6261 5 лет назад

This guy is a legend. Love watching these videos.

@myturkishlife1777 2 месяца назад

40+ years body guy here, it's great to see these skills, really takes me back.. great job 👍

@sausageseggandchips 4 года назад

Amazing - didn't think this level of damage could be repaired that way.

@artysanmobile 4 года назад

I’m amazed you could be so effective along the crease line. Really impressed. You are an artisan.

@robertlangley258 4 года назад

Absolutely amazing. This understanding of how metal moves is either in you or it’s not (I fit this side). I kinda see it but will not fool myself into believing I could do something like this. You are an expert in my book. That was just amazing to see you “coach” the metal back where it once was. Very very good work sir. ⭐️⭐️⭐️⭐️⭐️

@johncunningham1498 4 года назад

Haven't read through all the comments but fail to see why anyone would put a thumps down your workmanship is outstanding and the videos are very well edited, well done mate look forward to the next one

@1st_track_dents 4 года назад

Thanks John!

@ianhaynes5898 4 года назад

Amazing, never thought it would end up looking so good.

@adyantiscool 4 года назад

It’s really impressive to see such level of craftsmanship. The cost of a new door with paint and all costs a lot but this work which you have done is so rare. I wonder that most of the panel beaters don’t even put so much effort. They would simply suggest to install new door and pay huge amounts of money.

@courtneyb6154 4 года назад

Excellent craftsmanship my man. Would be interesting to see the owners faces when they first see what a fantastic job you've done :-) Excellent work!!!

@shareurtube 4 года назад

Sir you are 10% technician and 90% skilled craftsman and Sculptor. You have this down to a fine art. Really enjoyed the video.

@johnschotz1614 5 лет назад

Now that’s a true craftsman!

@ianwoods1384 4 года назад

A craftsman at work. This gentleman deserves much respect. Very well done sir. Thankyou for posting. If that was my car, I'd be absolutely thrilled with this gentleman's work, and great communication skills too.

@Biffo1262 5 лет назад

Skill and perseverance....admirable qualities.

@Malidictus 4 года назад

So I had a Dunning-Kruger moment watching this. As he started hammering the dent initially, I thought "Hey, that doesn't look so hard!" Then he started talking about metal stress and metal stretching and balancing forces, then he started pulling out tools I've never seen to hammer dents from angles that didn't look possible. "Oh, right!" I realised. "It only looked simple because I had no knowledge or experience in the matter." That's quite amazing work! :)

@mariohenriquez8599 4 года назад

It shows that there is nothing impossible in this world, all can be fixed for guys with your actitude.

@briannolan7818 4 года назад

I'm not sure why I watched this video? I don't have a dent on my car and I'm not going to ever try this, but your work is like that of an artist and I just had to watch. Thank you.

@nurbsenvi 4 года назад

He is actually Magneto all that tapping is for RU-vid

@kevinbaird7277 4 года назад

I have been thinking for a while about a new career in PDR, I have now decided that it is for me, I will look for training in the new year, incredible level of skill on demonstration here. 👏

@ryanpenrod1859 4 года назад

First look at all the comments here stating that there is no money or future in this trade--I would advise against it. Learn it as a hobby but don't go all-in on this.

@stewartw.9151 4 года назад

Bravo! I love to see things saved and restored instead of just tossed on the dump - too much of that these days! I have restored cars, boats, motorbike and aircraft, so I salute your old-school skills, patience and a good eye!

@um8765 4 года назад

Mate, you are bloody good at this, well done you son of the so and so, didn't think that could be repaired painlessly.

@nathanielmorton659 2 года назад

The craftmanship displayed in this video is impressive and intimidating

@1st_track_dents 2 года назад

Thank you, but it shouldn't be intimidating as anyone with the right training can do this. 👍👍👍

@nathanielmorton659 2 года назад

An amazing accomplishment.....I ve never used the PDR kit just mini plungers.....never had success like this

@ivan23caravantes44 5 лет назад

I wish i could find a guy like that in Los angeles, California... wow amazing job.

@jeffr985 4 года назад

I am sure there are few of them with similar skills in a metro area like that.....

@Antagraber 4 года назад

And in Barcelona !!!

@eggy7346 Год назад

This is when a person has both percision, finess, patience, and a keen eye Fantastic work mate

@DentZero123 4 года назад

Jake ! You really are one of the best in the business you should definitely do an online school you would do so well with that

@1st_track_dents 4 года назад

Thanks! Yes, I get a lot of people asking me all the time. Let's wait and see 😉

@DentZero123 4 года назад

@@1st_track_dents one thing I really do wish people would actually start showing is what's going on behind the dent how the tool is working. Like a split camera view or something would be kind of cool

@DentZero123 4 года назад

@@1st_track_dents if you start a school you would have students from all over the world think how powerful that is

@1st_track_dents 4 года назад

@@DentZero123 Yes, trying to get those camera angles when i'm out on the road is difficult as you need a lot of light behind the panel as it is very dark, I plan to film some repairs in my workshop when I have finished doing it up, then I will be able to show stuff like that as I can control the environment better. 👍

@DentZero123 4 года назад

Jake actually have a question although I've never done this myself but I was just curious can someone work on a panel at night time. I find it much more cooler at night

@Kerrsartisticgifts 3 года назад

Wow! Great job, I bet that customer was happy as a lark!

@shanebrookes1878 5 лет назад

That’s magic

@bother1844 2 года назад

LOL! It remembers me of the Miami vice series. Nothing but excitement and show. Nothing to learn here for us technicians other than commercializing how good you are at what you do. You are good indeed.

@1st_track_dents 2 года назад

Thanks Raymond, yes they are more walk throughs of what I did to get the job done, but hopefully for any new tech's they can see the type of tools that I use and some of the techniques. Although the industry changes so much, I would have used much different techniques on this job now and probably would have got it out much quicker 👍

@JeanV1986 5 лет назад

Amazing skills, bravo!

@MrKoladge 4 года назад

I've been doing bodywork and paint forever and I'm going to practice this skill. Now that I'm older I have the patience. Being a younger me I'd have had it plastic filled and in primer in 2 hours... always in a rush back then.. This is AWESOME....

@pete2070 4 года назад

This chap's an Artist. Passionate about the job he's doing; and totally knows what he's doing!

@taxiuniversum 4 года назад

„Any sufficiently advanced technology is indistinguishable from magic.“ Arthur C. Clarke

@antoniovda1295 4 года назад

To call you a magician is an understatement. Sincere congratulations!!!

@Kozlo922 2 года назад

you're a g d god! you're a true artist. plain and simple.

@1st_track_dents 2 года назад

Thanks 👍

@methanoid 4 года назад

I was hypnotised watching this and thinking "Yeah but bet my local guy isn't this good" and guess what... He IS my local guy. What a stroke of luck. I'll be checking him out soon enough no doubt!!!

@patrickrota7818 4 года назад

Bravo, c’est de l’art !

@franke1917 4 года назад

Amazing! Very nice

@cr3237 3 года назад

I have bought a used car with some dents on it that I would like repaired. I was busy sourcing rear quarter panels and found this. After watching, I got the details of a local PDR repair company and will get them to fix it.

@1st_track_dents 3 года назад

That's great, I wish you lots of luck 👍

@cr3237 3 года назад

I wish you were nearer to me, I would get you to fix it. Seen some more of your videos and really impressed with the work. I did doubt that the wheel arch on my car could be fixed, but seen you sort worse! Hopefully my local dealer is a whizz as well!

@1st_track_dents 3 года назад

@@cr3237 I'm sure they will be, I always say check a companies reviews, that should give you some idea of their capability, Good Luck!

@keith1542 4 года назад

Nice job. I've done lots of body and fender, yet this is so far advanced than the way we did it before.

@roldanbijis4211 5 лет назад

Looks Like back to.. The-All-New..

@troy78552 4 месяца назад

That was amazing work ,I didn't know it could be done professionally with hand tools 😮

@sticky170 4 года назад

True craftmanship, awesome job Sir.

@zaptor1514 4 года назад

So many separate collisions on one door. Time to make changes on parking selections etc.

@davis2284 4 года назад

Welcome to public car parks

@bsc4344 4 года назад

Holy sht. Now only if someone had vids about repairing poly bumpers with the SKILL LEVEL that you have!!

@MrDejast 4 года назад

This guy could spend a month at my house. teenage drivers, and my wifes driving oops.

@pasindabimsara4617 4 года назад

Lol 😂😂

@dubsydubs5234 4 года назад

Did body work for more that 30 years and I'm still impressed at what PDR achieves, quality work son.

@johnathanbooth1865 4 года назад

You sir are a master of your craft and an inspiration to us all. Absolutely amazing!

@DavidLyon 5 лет назад

Dude, these repairs look so good, it's like they are done in reverse. You find a perfect car then you damage it deliberately and show that at the start haha. Nah, I believe it's real - haha.

@1st_track_dents 5 лет назад

🤣

@cmackscott761 4 года назад

I have done bodywork since I was 16 and I'm impressed.

@uz1144 4 года назад

Amazing , I got my car while parking and it’s been To body shops now it’s getting a new door. I wish skills like what you have were more around here too

@mmohammadsana 4 года назад

In the past life this guy was a woodpecker 😂

@TheRitmosalsa 4 года назад

😅😅😅😅yeaaaa

@anthonynorbury8173 4 года назад

Brilliant..... Rather see things recycled/repaired than replaced..... Great repair....

@MrGuvEuroman 4 года назад

I saw this and thought of that father ted episode 😂

@craigrobinson7113 4 года назад

MrGuvEuroman “I thought I had it back there Dougle”

@happysawfish 4 года назад

@@craigrobinson7113 : not sure what you guys are talking about, but I think I need to see it!

@PtBm2975 4 года назад

Nearly 170,000 views and only 5400 Thumbs Up?? (89 Thumbs Down-how???). It is a sad, jaded world that doesn’t marvel at this guy’s artistry...

@jimmycline4778 4 года назад

This repair took 4 months! Good thing he time lapsed it! 😂

@HutchinsonJC 4 года назад

A quote from the description: "It was also a challenge to get it finished in time as the sun was setting fast, so some of the last shots were getting a bit dark!" Seems to me he did it in a day. I don't care if you think you're joking or if you think you're being sarcastic, I'm just going to say your comment here is ridiculous.

@stevecockburn9764 3 года назад

Mate . You are a real craftsman!! Good on you .

@uweinhamburg 4 года назад

Take your tools and get down to Westminster M8 😂 There are a few dents that could need some gentle hits on the head.... Good job btw. 👍

@carmo9693 4 года назад

You crazy dude that looked perfect, maybe some dis-colorization in the paint from the stretching but 99% of people would not see it and when the car gets dirty no one will ever see it. Great work, I've seen worse on small little dents.

@wjsj69 4 года назад

It takes an artist to do this work. It's beyond a skill, it's an art. Well done!

@audimattro 4 года назад

I would have thought it to be far easier just to replace that door skin, not positive these Polo model doors are the same as Golf and Jetta doors, since we don't have them here in the States, so I am assuming they are built with door skins. That being said, a couple of things, first of all a marvelous job and great craftsmanship, given the size and all of the wrinkles in that damage. Another commenter mentions how this type of repair is very eco-friendly and that's an outstanding point. Virtually no landfill waste and rarely paints or chemicals involved. Also, consider the fact that the original sheetmetal and finish still remains and that's good for any car's resale value.

@andrewsmall6568 4 года назад

How much would something like cost?

@volundrfrey896 4 года назад

@@LS-ug1im Yeah for a reasonably common car that's the way to do it. Anytime you need to employ a man to do specialty work for a few hours it will be pricy, salary and taxes adds up quickly.

@lynnbernasconi2268 4 года назад

@@LS-ug1im the paint never matches... literally NEVER: aging, batches, sheen. If not having a mismatched door is important, worth the bit more money. :)

@NigelM18 4 года назад

A true artist!! Definitely a well experienced talent. Congrats.

@fan1701 4 года назад

The tools are nothing without the skilled person working them. 👏👏

@MegaSupermule 4 года назад

the patience you have,,,nice work !! WOWW

@alexanderzohrens2945 5 лет назад

one question: How many hours did you work on this door?

@1st_track_dents 4 года назад

I took between 4 and 6 hours, but much longer filming it:-)

@christophervanzetta 4 года назад

@@1st_track_dents much quicker than properly priming, painting, and clear coating a replacement not to mention with curing time for the paint!

@JeroenvanMontfort 4 года назад

Christopher VanZetta agree, and don’t forget that this new door also has to be purchased, assembled and mounted

@court2379 4 года назад

@@JeroenvanMontfort but not less than buying the same door off a wrecked cars in the same color already assembled. Depends on what is available and for how much. I also wonder about the paint, and whether it will start flaking off in 3 years due to all the working, or if the corrosion resistance is compromised. Great work though. I would like to learn the trick to smoothing all the ripples out.

@franklinpierce2854 4 года назад

@@1st_track_dents So, 4-6 hours, plus materials, the bill would be around $5-600 USD?

@rockerz8 4 года назад

The skill level you have and the eye to reach the desired results if un match for.

@mpowersmedia3219 4 года назад

Wow. You are like the cut man for a boxer only for cars brother. Standing ovation!

@Kusamedi2881 2 года назад

Love that Land Rover Behind!!

@johnrunion7258 4 года назад

You, sir, are a masterful craftsman.Hope you are getting well paid,worth every cent.Appreciate all that you do,especially on beautiful high dollar cars.

@mikebell2750 4 года назад

Great job! In this day and age where folks just replace things, you are actually repairing something.

@juris1114 4 года назад

I wonder how much money he charged for this job.

@mabisfab77paintball 4 года назад

i think you be happy to pay what he asks ...just look before and after i doubt he got anywhere near what a spray shop would want

@jamesrogers47 4 года назад

Whatever it was, it wasn't enough.

@deaddy57 4 года назад

no idea of what you actually did but am very impressed with what you did., great job, wish I had that skill.

@larrytornetta9764 4 года назад

The metal in modern cars is so thin you can dent it with your finger.

@dominicpetruzzelli3134 4 года назад

GEEZUS ! This guy is the Michael Angelo of PDR !

@Cap10VDO 4 года назад

You, sir, are an artist. Well done.

@avshiloh2438 4 года назад

WOW!!! Unbelievable results! A TRUE ARTIST!

@abhimanyu267 3 года назад

It’s the best denting video i have seen till date

@norbiesison9257 3 года назад

You mean to say you did all that work on a single day? With all the man-hours you put in, you are actually saying it still costs less than putting a new door (even a surplus one?) and refinishing it?😮🤔 Absolutely incredible!!

@danapatelzick594 4 года назад

Impressive, you are an artist. It was almost like you relieved the stress and the panel moved back to its original shape. Would never would believe you could remove that crease. Very cool.