Тёмный

The Way I Repair A BIG Dent With Paintless Dent Removal | PDR 

Dent-Remover
Подписаться 54 тыс.
Просмотров 1,4 млн
50% 1

Vehicles with dents can be repaired with Paintless Dent Removal (PDR)
This Mini was a recent job of ours, Our customer called us to say her car had been damaged by passers by falling/kicking the side of the car and leaving a hefty looking dent
The repair was done using only the latest Glue repair tools and a bit of skill! I filmed this job to show you how the repair is carried out....I hope you enjoy!
💚WE NOW HAVE MEMBERSHIP!
Join this channel to get access to perks:
/ @dentremover01
💥We love using the Gangrene tabs from Black Plague PDR, The crease tabs are the toughest on the market that ive tried so far, especially the 38mm crease tabs!! Use "Dent-Remover" in the discount section at check out!
get yours by clicking this link and also spend over $100 for free shipping
😊www.blackplaguepdr.com/discou...
🟢The Hot glue tabs by DB Dent tools are amazing! New 2.0 tabs have just being released and also the Green plastic Nylon ones too. Get yours now ⬇️
dbdenttool.it
🔴The Glexo cold glue can be purchased from
glexotools.com
------------------------
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 Intro
00:46 Explaining the damage
02:11 Start the repair
02:52 The first glue pull (Sideways)
03:39 Using GLEXO cold glue
04:53 Check the repair so far
05:22 The top crown
08:57 Repair the middle?
10:42 Repair the bottom crown
11:14 Middle dent again!
13:12 The finishing touches
14:35 Thank you for watching til the end
14:58 Before & After shots
15:26 Endscreen
----------------------------------
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin Sadler
#paintlessdentremoval #youtube #collisionrepair #dent

Авто/Мото

Опубликовано:

 

31 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 979   
@keymad4
@keymad4 8 месяцев назад
Watching high quality videos like this is the reason why I don't watch TV anymore, thanks for putting the extra time into your videos they really do come across as being really professional thank you and another job perfectly done, brilliant Martin.
@dentremover01
@dentremover01 8 месяцев назад
Thank you Keymad4 I really appreciate your great feedback andnits great to know I’m on the right track. A lot of effort goes into editing these so comments like yours help me move forward
@keymad4
@keymad4 8 месяцев назад
you deserve it.@@dentremover01
@Choober65
@Choober65 7 месяцев назад
Same here, plus you learn how to do cool stuff.
@dentremover01
@dentremover01 7 месяцев назад
@@Choober65 thank you
@ianrobinson9243
@ianrobinson9243 7 месяцев назад
I agree , YT is such an education and I rarely watch TV anymore. Whilst I may not attempt a lot of things I watch , what is does do is give me a better insight and understanding in to various things that previously I may have sat back and moaned about. I’ve added you to my subscriber list and will look at some of your other videos. Bodywork is such an art , if I could transport myself back to 16 again I’d have loved to gone down that route as a career. Top work 11 out of 10. Craftsmanship at it’s best.
@marcelpursche5339
@marcelpursche5339 7 месяцев назад
Astonishing! If it was my car I would have been totally satisfied with the first two pulls you did. But you even managed to get all the smaller dents out. A work of art.
@dentremover01
@dentremover01 7 месяцев назад
Haha thank you! Just takes patience to carry on and finish the repair! Thanks for watching
@Boxing4K
@Boxing4K 6 месяцев назад
@@dentremover01 I think that take a helluva lot more than just patience. You're clearly a very experienced repairer, with an amazing skill set. Where did you learn to do that?
@dentremover01
@dentremover01 6 месяцев назад
thank you @Boxing4K I appreciate your comment.it took a few years to learn this and I taught myself while panel beating, fixing cars daily I was able to lessen the amount of filler put into cars and ended up not having to remove the paint if it was ok
@igor9746
@igor9746 5 месяцев назад
How much for this ''simple'' type of repair ??
@dentremover01
@dentremover01 5 месяцев назад
@@igor9746 this type of repair would be from a couple of hundred upwards
@adfraggs
@adfraggs 4 месяца назад
I can't help but think of the episode of Father Ted where they try and repair a small dent in a prize car. I don't think they quite had your skill level. Really nice work.
@dentremover01
@dentremover01 4 месяца назад
You almost had it there for a second Father!
@gartgreenside3657
@gartgreenside3657 Месяц назад
@@dentremover01 That scene must be well known in the industry!
@Conservator.
@Conservator. 8 месяцев назад
You are an absolute artist! 👌 Btw: these repairs show how incredibly strong modern car paint is.
@dentremover01
@dentremover01 7 месяцев назад
Hi Conservator appreciate your kind words Yes 100% the paint is very strong especially on BMW and German vehicles. Some older Japanese vehicles are quite weak though and the paint can sometimes come away
@mik823
@mik823 6 месяцев назад
A bs artist 👎
@roromad9603
@roromad9603 2 месяца назад
i was going to say the same thing. this is art, like a plastic surgeon but for a car. just amazing skills.
@jimmymiller77
@jimmymiller77 7 месяцев назад
I have never saw so much skill. I wish he would open up a shop in my town. All my best from the US. JIm
@dentremover01
@dentremover01 7 месяцев назад
Thanks Jim! In the USA there are many super techs! Have a search and see how you get on
@hydorah
@hydorah 7 месяцев назад
That's bloody amazing mate! I didn't doubt you'd get it all out, but doing without removing any trim or plastics, 100% from the outside - That I did not expect! Very impressive!
@dentremover01
@dentremover01 5 месяцев назад
Thank you Hydorah I really appreciate your comment and sorry for the delay in replying. I repair lots just by using the Hot Glue System and very efficient and as you can see, effective Merry Christmas and happy new year
@darrenclarke3677
@darrenclarke3677 7 месяцев назад
Brilliant too see a genuine craftsmen at work taking pride in their work, great job.
@dentremover01
@dentremover01 7 месяцев назад
Thank you Darren 🙌🏼
@elvinlawcc
@elvinlawcc 7 месяцев назад
This is amazing! The skills and patience required for this job is incredible!
@dentremover01
@dentremover01 7 месяцев назад
Thanks for watching and commenting
@Trinida374
@Trinida374 4 месяца назад
Not to mention tools and type of lights used
@dentremover01
@dentremover01 4 месяца назад
We have a lot of tools here
@4faxache935
@4faxache935 2 месяца назад
I'm a joiner who takes great pride in my work and i must doff my cap to the care and time you put into what most people would think was an impossible job. Amazing.
@dentremover01
@dentremover01 2 месяца назад
Thank you so much. Nothing wrong at all with putting the effort and going the extra mile for that ultimate finish as I’m sure you do with your work. That’s what sets us apart from the rest 🙌🏼
@justincase1575
@justincase1575 7 месяцев назад
That is truly awesome! Worked in a body shop 55 years ago when lead was still used to repair! This is amazing!
@dentremover01
@dentremover01 7 месяцев назад
Thanks Justin! When I started panel beating thy had just phased out lead work. Was 1997 time. Was panel beating til 2011 when I went self employed with PDR Well done doing 55years!
@FreddieTiffy
@FreddieTiffy Месяц назад
I can attest to Martin's work, I recently took my car to him and the end results were simply astonishing! I'm sure my neighbours think I'm bonkers because I occasionally just go out and stare at my car in sheer disbelief that the dents are no longer visable. A true master of his craft. Thanks very much
@dentremover01
@dentremover01 Месяц назад
Thank you FreddieTiffy that’s amazing to hear! Thanks for sharing your feedback on my services and your certainly not bonkers you just enjoy your car 🙌🏼
@thomasdavidbassett483
@thomasdavidbassett483 7 месяцев назад
A pleasure to watch a craftsmen at work.
@dentremover01
@dentremover01 7 месяцев назад
Thank you so much
@user-rw9ew7yw9e
@user-rw9ew7yw9e 7 месяцев назад
Martin, thank you so much for your videos. I am a novice PDF specialist, thanks to your content I have learned a lot. I'm watching your videos through an interpreter, I'm from Russia! Thanks again!
@dentremover01
@dentremover01 7 месяцев назад
Thank you for your great comment and congratulations starting PDR I do have Russian subtitles if that helps? Check out the cc in the corner of the video and choose Russian That should help??
@asson4618
@asson4618 15 дней назад
I thank you for your excellent work, tell me where do you buy PDR tools? I'll learn from your video!)
@petesky007
@petesky007 5 месяцев назад
I just stumbled onto this and I've got a dent in the front of my car. It's ruddy marvelous what you've done. Pure sorcery! 👏
@dentremover01
@dentremover01 5 месяцев назад
Thank you Pete! Try and speak to a Dent technician first and see what they say. Then you can attempt it or get them to fix it Happy new year
@J4rn0
@J4rn0 24 дня назад
I truely believe this is a craft where people underestimate the amount of experience you need to be able to do this for a living. Beautiful to see.
@dentremover01
@dentremover01 22 дня назад
100% correct I get it all the time when people see me repair a dent within a minute and expect it for free or for £20 When I charge them 80 +vat they get angry. But I saved them dropping their car off at a bodyshop. Waiting for them to repair it, fill the dent, strip the car down, prime it and paint it, then polish it up and put it back together-- They miss this and think I’m taking the pee! lol
@Kingdonnerkebab
@Kingdonnerkebab 4 месяца назад
Now thats a craftsman! Like watching an artist at work. Amazing!!!!!
@dentremover01
@dentremover01 4 месяца назад
Thank you so much 🙌🏼
@Unsko-sanski_kanton
@Unsko-sanski_kanton 8 месяцев назад
One more really amazing repair. I enjoy watching your skills!
@dentremover01
@dentremover01 8 месяцев назад
Thank you Unsko- sanski Kanton 🙌🏼
@martinuribe4722
@martinuribe4722 Месяц назад
A true craftsman. Of course he makes it look so easy. Simply amazing. Or as my friends from across the pond would say, “Absolutely brilliant “.
@dentremover01
@dentremover01 Месяц назад
Thank you very much!
@paultaylor9652
@paultaylor9652 7 месяцев назад
A big 👍 from me, I recently had to use one of these guys in my area on my car, and they're all incredibly talented.
@dentremover01
@dentremover01 7 месяцев назад
Amazing! PDR is the best method if you have a dent without paint damage
@petervisi5369
@petervisi5369 7 месяцев назад
High quality video and really satisfying to watch such a pro at work.
@dentremover01
@dentremover01 7 месяцев назад
Thank you kindly Peter 🙌🏼
@elefja1
@elefja1 26 дней назад
Wow much respect for your skill. Reminds me of this documentary I saw of these Japanese metal smiths hand forming the nose section of the bullet trains. You definitely know how to read the material you work with!
@dentremover01
@dentremover01 25 дней назад
Thank you for your great comment! Metal smiths have their own set of skills I don’t think I could do that! They even amaze me
@olegyamleq7796
@olegyamleq7796 7 месяцев назад
agreed: absolute artist! Can you imagine how many people in the "world" can do this, very very very few!! WOWWWW
@dentremover01
@dentremover01 7 месяцев назад
Thank you so much for your kind words
@budflanagan1262
@budflanagan1262 6 месяцев назад
I’m another who stumbled across this channel, totally blown away by the skill involved and the patience required. Well done, great customer and viewer attitude, and great to watch. I’m going to have to get a dent removal starter kit, if they exist, and have a go at a couple of dents in my car next! I love having a go myself at things on my car, but have to work outside, so it’ll be a Spring project 😂😂
@dentremover01
@dentremover01 6 месяцев назад
Hi Bud Flanagan thank you so much for your kind comment. Very happy you enjoyed the video and hope you subscribed to our channel 🙌🏼 There’s alot of cheap PDR equipment on eBay etc, always best to practice on a scrap panel first before you try it on your vehicle but certainly try! All the best Martin
@LearnPDROnline
@LearnPDROnline 7 месяцев назад
You just keep getting better and better mate, well done Martin! Nice repair, great explanation and cracking video to watch!
@dentremover01
@dentremover01 7 месяцев назад
Hi Tom! Hope your well mate and thank you!! I enjoyed making this one! Not filming it though I had so many people come in that day to chat with me and the rain too!
@haitch04
@haitch04 7 месяцев назад
Just saw this and thought 'worth a look' I found myself absolutely gobsmacked, I'd no idea how dents were removed. Such a skill and a very interesting video.
@dentremover01
@dentremover01 7 месяцев назад
Amazing thank you for your great comment and a pleasure to show you something new!! I hope you subscribed so you can see more in the future 🙌🏼
@gauravkumar3146
@gauravkumar3146 Месяц назад
This is more of an ASMR video than repair work. Man I can watch this all day.
@dentremover01
@dentremover01 21 день назад
Wow, thanks. I have plenty of asmr tapping edits I should make an asmr??
@bmcbodyshop1
@bmcbodyshop1 8 месяцев назад
Great work ! great video too !! from an old 30 year in the job and still at it ! and still learning :) cheers , Shane
@dentremover01
@dentremover01 8 месяцев назад
Hi Shane thanks for your comment! 30 years in the trade wow well done! Plenty of repairs right there!
@dentremover01
@dentremover01 8 месяцев назад
Thank you for checking out my latest repair video 😊
@whodat7366
@whodat7366 8 месяцев назад
#dentking #dentdiscount #pdrking #manofsteel #pictureperfect #creaselife #b16dent #uksnumberone
@moamgaphonemga6166
@moamgaphonemga6166 17 дней назад
Desculpe a indiscrição, quanto cobrou por esse excelente trabalho?
@dentremover01
@dentremover01 16 дней назад
As a guide it’s from 300+vat 😊
@bizarremagick
@bizarremagick 7 месяцев назад
Just found this by 'accident' - absolutely fascinating. I had no idea how much this technology had developed. Thanks.
@dentremover01
@dentremover01 7 месяцев назад
Amazing! Thank you for watching and enjoying!
@dwightrapp4788
@dwightrapp4788 7 месяцев назад
That was absolutely crazy to watch. Never have seen that done before. That guys amazing.
@dentremover01
@dentremover01 7 месяцев назад
Thank you!!🤩
@ayougo
@ayougo 7 месяцев назад
Pro! A lot of pdr guys haven’t a clue. You have mastered this type of dent.
@dentremover01
@dentremover01 7 месяцев назад
Thank you very much
@1st_track_dents
@1st_track_dents 8 месяцев назад
Top quality work! Top quality production! what more can you say 😉
@dentremover01
@dentremover01 8 месяцев назад
Thank you Jake 🙌🏼
@uba1988
@uba1988 8 месяцев назад
amazing work! I admire these works as a true artist! Well done! May I kindly ask you what lamps do you use? do the ones with the stripes already come out like this or do you apply an adhesive to have the striped effect?
@dentremover01
@dentremover01 8 месяцев назад
Hi Thanks for your message. The light I use is from Elim a Dent And you can either buy the lenses with lines on, or I personally use 2-5mm black coach lines which are adhesive
@bladder1010
@bladder1010 23 дня назад
Amazing skill and craftsmanship. Hats off to you!
@dentremover01
@dentremover01 23 дня назад
Thank you kindly
@markcliffe7
@markcliffe7 17 дней назад
Wow, great to see a proper craftsman at work, great vid
@dentremover01
@dentremover01 16 дней назад
Thank you kindly 🙌🏼
@brucewayne2773
@brucewayne2773 7 месяцев назад
it ain't as easy as it looks mate, all the tools needed ain't cheap either. Best to just pay guys like him to work on your vehicles and be happy with it.
@dentremover01
@dentremover01 7 месяцев назад
Hey Bruce. Yes correct. I show the process and repairs to show the process so customers and viewers see what’s involved. But for a total newbie to do this I’d always recommend speaking to a dent tech first, and then have a practice before trying their own car 🙌🏼 batman
@brucewayne2773
@brucewayne2773 7 месяцев назад
I have multiple dent removal tools and have given a go at it on my own vehicles. I still hire dent less removal guys to fix my cars. Not anyone can do it even with the right tools. Training is definitely needed and lots of it. I rather do the body work and paint it if that ends up with a better result.@@dentremover01
@alexandruszilagyi1176
@alexandruszilagyi1176 8 месяцев назад
Second 😁
@dentremover01
@dentremover01 8 месяцев назад
Thank you!!!
@afikzach
@afikzach 2 месяца назад
Listen, you are a master craftsman, what a beautiful work! I wish that even 5% of the dent workshops were close to this level
@dentremover01
@dentremover01 2 месяца назад
Thank you for your kind comment. This is the type of work I produce daily. I take pride in my work. I’m sure the other guys do the same but I can only showcase my work 😉 thanks for watching
@Ian-Hall
@Ian-Hall 2 месяца назад
Totally amazing work, I never in a million years thought you get that out without paintwork. My mind is blown away.
@michaelcarey8153
@michaelcarey8153 8 дней назад
Jesus loves y’all!!! John 3:16
@onemaxlight
@onemaxlight 7 месяцев назад
this is when a "hand-work" is made by an ARTIST... compliments from Italy man! impressive
@dentremover01
@dentremover01 7 месяцев назад
Thank you so much! 😊
@binauralfortune
@binauralfortune 2 месяца назад
your technique, skills, and tools are amazing to see, Martin. Thanks for producing this video!
@MrBigMalT
@MrBigMalT 3 месяца назад
All the gear AND all the idea. Superb! I couldn’t believe how much you popped out, just with the first lateral pull!
@m60kaf
@m60kaf 7 месяцев назад
I can't say I find watching PDR that interesting - I tend to watch tech videos of things I intend doing and I know its a skill that looks easy and is far far from it, i would lose patience and try to rush, but I have to say watching the reflection lines progressing was fascinating
@dentremover01
@dentremover01 7 месяцев назад
Excellent thank you for watching! It can get a bit boring watching a PDR video so I like to make it a bit different using angles and show you guys what I see. It is a patience game but to be fair when I’m repairing a big job I drift off and think of other things! I watch a lot of engineering vids too 🙌🏼
@SuperBartet
@SuperBartet 7 месяцев назад
Thanks, great video. Last year I had part of a chimney fall on my car parked by the side of my house. When it came back from repair, I could not believe they had removed all the dents in the roof. The car looked like it had just come out of a show room. Thanks to you I now know how they did that miracle.
@dentremover01
@dentremover01 7 месяцев назад
Amazing! Glad you were able to have your car repaired and yes! This is how it’s done!! Thanks for watching and commenting 😉
@stevenwhittaker1732
@stevenwhittaker1732 7 месяцев назад
As a valeter I've seen dent removal guys in person doing these sort of things and there wizards.... It's absolutely amazing how they do it
@dentremover01
@dentremover01 7 месяцев назад
Hi Steven thanks for your great comment! I bet you seen plenty of repairs in the past, you should get into PDR
@stevenwhittaker1732
@stevenwhittaker1732 7 месяцев назад
@@dentremover01 I've tried it, I'm far too impatient and heavy handed, and I spit my dummy far too easily 😂
@michaelreeves8164
@michaelreeves8164 6 месяцев назад
To me, it's like magic. Highly skilled work from a highly skilled technician
@dentremover01
@dentremover01 6 месяцев назад
Thank you Michael very kind of you 🙌🏼
@petedowns7183
@petedowns7183 4 месяца назад
I had no idea that such a thing was even possible. To hell with the rabbit and the hat both. You are the worlds greatest magician when it comes to making things disappear.
@dentremover01
@dentremover01 4 месяца назад
Thank you so much for commenting and enjoying the video! My wife can make money disappear quicker than I can repair a dent lol
@Nightcrawler666
@Nightcrawler666 7 месяцев назад
Wow. Now that's literally watching a perfectionist at work. Outstanding job.
@dentremover01
@dentremover01 7 месяцев назад
Amazing! Thank you 🤩
@davidniquot6423
@davidniquot6423 7 месяцев назад
Very good job, not wasting energy nor material... this is a "green" way of repairing something. Need experience and method, you do very well in those 2 fields.
@dentremover01
@dentremover01 7 месяцев назад
Exactly this. We’ve tried with the insurance for years. But they make more money from conventional repairs and car hire. It’s all backwards
@franciscoramos226
@franciscoramos226 7 месяцев назад
Hi Martin, it's always a pleasure to watch your outstanding work and videos. As always, thank you for sharing them 🤩
@dentremover01
@dentremover01 7 месяцев назад
Thank you Francisco hope your well mate
@george1187
@george1187 Месяц назад
Wow , this is a highly skilled job ! Congratulations!
@dentremover01
@dentremover01 Месяц назад
Thank you! Cheers!
@qzqx3047
@qzqx3047 4 месяца назад
I am learning a lot. People in Europe have incredible skills. Thank you
@scotted6136
@scotted6136 2 месяца назад
took auto body in high school . never seen this type of repair pretty cool repair method . Great work sir.
@dentremover01
@dentremover01 2 месяца назад
Amazing thank you so much for your comment and enjoying the repair
@knutknutsen5610
@knutknutsen5610 Месяц назад
Fascinating to watch this no damage repair. Really nice job.
@dentremover01
@dentremover01 21 день назад
Glad you enjoyed it
@grindled
@grindled 4 месяца назад
You are the Leonardo Da Vinci of dents Sir. Amazing stuff and so absorbing to watch a master of their craft.
@dentremover01
@dentremover01 4 месяца назад
Thank you very much for your kind comment and glad you enjoyed the video!
@crescentmemorials9855
@crescentmemorials9855 6 месяцев назад
All I can say is WOW! I never knew about this method of dent repair. Look forward to future videos.
@dentremover01
@dentremover01 6 месяцев назад
Amazing! Thank you I’m glad I could show you something new!
@NackDSP
@NackDSP 7 месяцев назад
Perfect video. Great view showing how the lines on the lamp reflect off the panel. I have a very similar dent in my door. Now I know just how to approach it. The local PDR shop didn't want to take it on. Thanks for posting this.
@dentremover01
@dentremover01 7 месяцев назад
Thank you NackDSP appreciate your kind comment. Just take your time when trying your repair. Did the dent tech say why they wouldn’t fix it for you?
@stevejelly3161
@stevejelly3161 4 месяца назад
Wow thats incredible 🙂. . An old mechanic told me decades ago that once a panel is dented ...... the metal was stretched !!! . (It was the early 80s and they were a bit "grumpy") ...lol . Thanks for the video 🙂
@dentremover01
@dentremover01 4 месяца назад
My pleasure. I hear all sorts but yes they can definitely be straightened! Mechanics are still grumpy in 24! lol Thanks for watching and commenting 🤗
@stevejelly3161
@stevejelly3161 4 месяца назад
@@dentremover01 It was great watching mate ..... and you're right about mechanics and MOT testers are worse lol
@mnmlbaez
@mnmlbaez 5 месяцев назад
Dude this is the second video I watch and im amazed how detailed you are. You sir, are an artist!
@dentremover01
@dentremover01 4 месяца назад
Thank you so much 😀and for watching my video! Hope you subscribed!
@jezedwards3858
@jezedwards3858 7 месяцев назад
What a great video, thanks for sharing your secrets Mike and demonstrating your amazing skills. Brilliant!
@dentremover01
@dentremover01 6 месяцев назад
My pleasure! Glad you enjoyed it!!
@victornortjie7062
@victornortjie7062 5 дней назад
I wish I could bring my car to you this is extremely excellent very professional and done out of passion thank for making this video God bless you ❤
@dentremover01
@dentremover01 4 дня назад
Thank you so much. We’re in Beverley East Yorkshire!
@GoodwoodMR2
@GoodwoodMR2 7 месяцев назад
It's fascinating to watch you work the dent out, superb repair.
@dentremover01
@dentremover01 7 месяцев назад
Glad you enjoyed it thanks!
@PATWENTY8R
@PATWENTY8R 16 дней назад
Awesome skill and patience.
@dentremover01
@dentremover01 День назад
Thank you! Cheers!👋🏻
@billsmith6745
@billsmith6745 3 месяца назад
Wow, a true master at work. Amazing.
@michaelcrump1288
@michaelcrump1288 4 месяца назад
excellent patience got the job done. Good skill
@williamrobertson9155
@williamrobertson9155 Месяц назад
Excellent workmanship
@dentremover01
@dentremover01 Месяц назад
Thank you so much
@justblairthompson
@justblairthompson 7 месяцев назад
Fantastic video, I loved how clearly you explained the process, genuinely fascinating.
@dentremover01
@dentremover01 7 месяцев назад
Hi Blair thank you for your great feedback, your comment really helps me make future videos 🙌🏼
@RichardHarlos
@RichardHarlos 4 месяца назад
Nicely done! Thanks for documenting the process and sharing it here.
@dentremover01
@dentremover01 4 месяца назад
Glad you enjoyed it!
@JRGRAY-33
@JRGRAY-33 7 месяцев назад
Fantastic attention to detail 👍🏾
@dentremover01
@dentremover01 7 месяцев назад
Than you very much 🙌🏼
@charltonwang
@charltonwang 5 месяцев назад
I have no idea why RU-vid is feeding me dent repair videos as this isn't something that I'm looking to do but I will say that watching a master at work in any discipline is always fascinating and enlightening.
@dentremover01
@dentremover01 5 месяцев назад
Amazing! I have no idea either but I’m very happy you chose to view it and you enjoyed it Have a great Christmas
@MrCabimero
@MrCabimero 5 месяцев назад
Sir what a pleasure to see a true craftsman do such a professional repair. Thank you for sharing.
@dentremover01
@dentremover01 4 месяца назад
Thank you so much for your kind words
@aarubs
@aarubs Месяц назад
You are skilled guy right there. Awesome.
@dentremover01
@dentremover01 Месяц назад
Thank you 🙌🏼
@aam77
@aam77 3 месяца назад
And all that without even going to the other side of the panel. Hats off.
@dentremover01
@dentremover01 3 месяца назад
Thank you 🙏 there are a few different ways to repair this. Some simple stripping or excessive (rear seats out) kind of job. I glue pull a lot so it was fine to do it this way
@user-audiggc
@user-audiggc 2 месяца назад
watch your videos since your channel opened, glad to see you have more and more subscribers, your hardworking and professional deserve it.
@jetxenoh2823
@jetxenoh2823 Месяц назад
Crazy impressive. He is a very talented artist.
@dentremover01
@dentremover01 21 день назад
Thank you kindly
@rasheyes
@rasheyes 2 месяца назад
Excellent. First time I've ever seen it done. It's a mystery no longer. Thanks
@dentremover01
@dentremover01 2 месяца назад
Amazing! Thank you for commenting and enjoying the video!
@PaulHayman-tq5kb
@PaulHayman-tq5kb 2 дня назад
I have seen your way of taking the time to explain how The job is done and good work man ship
@dentremover01
@dentremover01 День назад
Thank you so much for your kind comment
@neilbullock6835
@neilbullock6835 6 месяцев назад
Very impressive and a joy to see a professional at work.
@dentremover01
@dentremover01 6 месяцев назад
Thank you very much Neil 🙌🏼
@OH-HELL-NO...
@OH-HELL-NO... Месяц назад
Absolute craftsman at work.. Excellent workmanship.. Really enjoyed your video 😊
@dentremover01
@dentremover01 21 день назад
Thank you so much. Means a lot
@JamieBainbridge
@JamieBainbridge 4 месяца назад
You make it look so easy. What an amazing skill to have. Thank you for sharing your craft.
@dentremover01
@dentremover01 4 месяца назад
Thank you Jamie really appreciate your kind comment
@TheDarkInstall
@TheDarkInstall 5 месяцев назад
Fascinating. Every step was a learning experience. Bloody good.
@dentremover01
@dentremover01 5 месяцев назад
Thank you so much! Happy new year
@felipem.cavalcanti5014
@felipem.cavalcanti5014 6 месяцев назад
Wow ! Amazing results !
@dentremover01
@dentremover01 6 месяцев назад
Thank you! Cheers!
@user-ri3dv9id5d
@user-ri3dv9id5d Месяц назад
You sir, are an artist. Beautiful work.
@dentremover01
@dentremover01 21 день назад
Thank you! Cheers!
@josedias9458
@josedias9458 2 месяца назад
Man, very good, congratulations, amasing woork.God Bless you
@RoadieWingZZ
@RoadieWingZZ Месяц назад
Beautiful workmanship by a true master 👍
@dentremover01
@dentremover01 21 день назад
Thank you! Cheers!
@viscuine
@viscuine 7 месяцев назад
don't know how I stumbled across your channel, but watched this one and now subscribed and looking for more satisfying repairs, stunning work
@dentremover01
@dentremover01 7 месяцев назад
Thank you very much! I’m very happy you enjoyed my video(s) and you saw something different All the best Martin
@FenixBeatz94
@FenixBeatz94 4 дня назад
A great job worth all the money 💯
@dentremover01
@dentremover01 День назад
Thank you so muchb
@alijuratli
@alijuratli Месяц назад
Amazing precise, thank you
@dentremover01
@dentremover01 Месяц назад
Our pleasure!
@markb1971
@markb1971 Месяц назад
That is amazing . Never seen this done before !
@dentremover01
@dentremover01 Месяц назад
Welcome to PDR Mark! I hope you watch a few more and subscribe! Thanks so much for commenting
@jbuchan8114
@jbuchan8114 Месяц назад
Great job fun to see the changes as you work.
@dentremover01
@dentremover01 Месяц назад
Thank you
@michael5089
@michael5089 7 месяцев назад
What a satisfying watch. Someone did say to me a few years back that minis were especially difficult with dent removal so this is top work and I may now have to add you to my list of select car related channels I sub!!👍👍👍
@dentremover01
@dentremover01 7 месяцев назад
Wow thanks Michael! Yes the doors can be a nightmare because they are ultra braced! And a pain to strip the doors too Appreciate your sub and I’ll look forward to showing you new videos asap!
@michael5089
@michael5089 7 месяцев назад
@@dentremover01 Thanks!!!👍
@jason9673
@jason9673 2 месяца назад
Incredible craftmanship!
@dentremover01
@dentremover01 2 месяца назад
Thank you
@richardanthony72
@richardanthony72 4 месяца назад
The RU-vid algorithm brought me here and boy was I not disappointed!! Liked and subscribed 👍🏻
@dentremover01
@dentremover01 4 месяца назад
Thank you so much for clicking and enjoying my video. Appreciate your subscription too 🙌🏼
@alfharris7459
@alfharris7459 4 месяца назад
Fascinating video, being an old school panel beater makes me think I was living in the dark ages! Top class work - genius!
@channex8179
@channex8179 7 месяцев назад
I've been in the motor trade 27 years as a technician and have always wondered how you guys manage it and how the line boards work, I very nearly did a PDR course a few years back as I need a change of career due to health problems, But decided I wouldnt be able to complete the course, I might actually do it now after watching this video. Thanks
@dentremover01
@dentremover01 7 месяцев назад
You don’t need a course. I self taught. If you’re a panel beater then get yourself a few long bars and a simple line board. Practice while you work. I can offer a day or a week course if you feel you’d like to try PDR. I can get you removing a simple dent in a week 🙌🏼
@channex8179
@channex8179 7 месяцев назад
@dentremover01 Thank you for the offer I really appreciate it, Unfortunately I'm in Stockport so East Yorkshire is a bit far to travel back and to for a week but I'll definitely give this a go, another feather in the cap and all that.
@ivansbaiz2291
@ivansbaiz2291 7 месяцев назад
Wow. Perfection. Golden hands. Congratulations from Italy!
@dentremover01
@dentremover01 6 месяцев назад
Thank you very much 🙌🏼
@ivansbaiz2291
@ivansbaiz2291 6 месяцев назад
​@@dentremover01❤
@gartgreenside3657
@gartgreenside3657 Месяц назад
When I watch a barrister destroy a witness with incredible intelligence and language skills my mind is blown. This is basically the same level of impressiveness.
@dentremover01
@dentremover01 Месяц назад
Amazing!!! Thanks for your great comments!
@paisleysgamingarmy9907
@paisleysgamingarmy9907 2 месяца назад
Thats amazing work how you took the dent out looks so satisfying when the dent popped out
@dentremover01
@dentremover01 2 месяца назад
Always satisfying! Thanks for watching and commenting
@crashaxearmory
@crashaxearmory 3 месяца назад
Thank you for sharing your skills.
@dentremover01
@dentremover01 2 месяца назад
My pleasure!
Далее
HOLIDAY Dent Fix!!
15:30
Просмотров 2,6 млн
🍟Best French Fries Homemade #cooking #shorts
00:42
$600 Dent Repair VS a Cheap Hot Glue Gun
17:52
Просмотров 1,5 млн
Subaru Fender Paintless Dent Removal
14:31
Просмотров 14 тыс.
Pulling to PERFECTION! | Getting Glassed!
12:56
Просмотров 5 млн
FIXED in 3 STEPS! | NO Paint NO Filler!
12:59
Просмотров 4,4 млн
Repair of damage from the key/No painting
16:36
Просмотров 988 тыс.
REBUILDING OF BALL BEARING
1:00
Просмотров 3,6 млн