NEW Engine Rattles Startup! WHO pays for THIS! Teardown on Ford F150 5.3 Triton

Подписаться 586 тыс.

Просмотров 240 тыс.

50% 1

Check out our New Custom Embroidered "Rainman Rays Repairs" Hats and our custom RRR and Wife Unit Coffee Mugs and Tumblers at RainmanRaysRepairs.com
Wife Unit unveils our tumblers HERE! UNLISTED video youtu.be/
Part 1: Hack Job! Mechanic Botches Engine Replacement! Ford F-150 5.4 3 Valve P0345 P0175 P0063 P2006 P2195 • Hack Job! Mechanic Bot...
Part 2:New Engine! Full of Codes! Ford F-150 5.4 3 Valve P0345 P0175 P0063 P2006 P2195 • New Engine! Full of Co...
Support the Channel with a Like and Subscribe!
Become a Channel Member or visit Patreon at / rainmanraysrepairs
Visit our Second Channel on RU-vid, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Located in Florida? Need work done?? Visit www.RainmanRaysRepairs.com
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers at www.RainmanRaysRepairs.com
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
#wifeunit #rainmanraysrepairs #mechanic #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,5 тыс.

@1marcelfilms 9 месяцев назад

Running the engine without valve cover for a few minutes is a great way to make sure nothing under the hood rusts ever again

@sumduma55 9 месяцев назад

On the older chevy V8 Engines we used to grab a set of valve covers from a junkyard and cut the middle lengthwise out. It would catch most the oil but still let you hear and see what was happening.

@paulgallo6484 9 месяцев назад

Lol

@edwardkveton3410 9 месяцев назад

Had a customer recently had 08 5.4 rebuilt. After rebuilding the engine has no power and misfire. After checking the timing and replacing tensioners with Ford quality parts. Back together Rt head (pass) was getting the code for our of range timing . Showing retarded after 5 minutes warm up. The machine shop missed the heads. As the camshaft had to much clearance. R&R the head with a good rebuilt head. All is well.

@michaelnomura5196 9 месяцев назад

And the oil makes everything shiny.

@BIGSB5150 9 месяцев назад

Hahahahahah thats so true but funny

@icemanddr 9 месяцев назад

The engine company was like” Let’s tell them we have to see the engine run with no valve covers.” “ they’ll never go to that much trouble to warranty the engine” …..rainman Ray Says……..” hold my beer!!!!!” 😂😂😂

@Aspie_Geek_UK 9 месяцев назад

quality comment, you made me spit my coffee out 😂😂🤣🤣😂😂

@alakeram22 9 месяцев назад

100% looking forward to the response, i bet they're in the office reviewing this video like "shit he actually did it...."

@Aspie_Geek_UK 9 месяцев назад

Followed by "What can we make him do now that doesn't seem too unreasonable for the damage he is claiming our client caused?"

@jrkorman 9 месяцев назад

@@Aspie_Geek_UK I was thinking the same thing throughout the video.

@jacksmith2315 9 месяцев назад

@@Aspie_Geek_UKanything they can tl void the warranty. I wouldnt be surprised if they said; nope, we voided the warranty because you ran the motor with no valve covers. Why would you do such a thing Ummm..because you told me to!! If i told you to jump off a bridge, would you? Warranty claim denied. And thats after they make him do a couple more stupid things Well why did you make me do all these other things if you voided it when i ran it w the covers off? We were looking for another way to deny the claim. Couldnt find one, so this was our best bet.

@Aspie_Geek_UK 9 месяцев назад

@jacksmith2315 I'm so glad that here in the UK, consumer protection is much more stringent than it is in most other countries, if a warranty claims adjuster told a UK mechanic to do that he would have told him to come here and do it for himself and then offered to give the adjuster a rolled up copy of his qualifications inserted where the sun doesn't shine. After that the claim would be quickly and quietly paid 🤣

@brianrobertson1211 9 месяцев назад

The most likely scenario@@jacksmith2315

@donlemme898 9 месяцев назад

The fact that you take pride in your work is one of the reasons your channel is one of my favorites. Gotta love the shop dog content too!

@46bovine 9 месяцев назад

Gotta have a shop dog or a shop cat, as long they are friendly.

@donaldmickunas8552 9 месяцев назад

The job of every insurer is to collect the highest premiums possible while making it as difficult as possible to pay any claims. This ensures maximum profits in a world where money and power seem to be the only things that matter any more.

@Dingthedingbat 9 месяцев назад

Oh god damn the traitors that feed the race war blacks and all anti drug whites

@wallebo 9 месяцев назад

Wow! So much work because someone else was not doing their job. Sad and frustrating. You, sir, are a saint.

@clbcl5 9 месяцев назад

If you see this Mr. Ray, I learned in my early days of truck driving, when you backing up in confined spaces such as inside your shop do it with windows OPEN so you can hear the yells and screams as you back over someone,

@miscbits6399 9 месяцев назад

Voice of experience?

@clbcl5 9 месяцев назад

@@miscbits6399 Common sense of safety backing up. Just like the occasions a spotter is needed.

@forgetfulme1719 9 месяцев назад

he allowed kids trolley-sliding around in shop before.

@michaelearl6991 4 месяца назад

Years ago backing a samurai being a little hesitant my spotter yelled just keep on coming until you hear the glass breaking and smells shit

@michaelearl6991 4 месяца назад

Stupid voice text semi not Samurai

@ronsloan7662 9 месяцев назад

Hey Ray, what an interesting video. When you pulled those covers with the over torqued fasteners, broken fasteners, etc and found they had sludge underneath I was stunned. Not to mention the oiled paper they customarily use on new metal parts inside. At least the parts inside the engine looked new. When you see stuff like this, it makes you wonder what other shortcuts were taken when rebuilding this "Premium" engine. Looking forward to see where this goes. You are the perfect guy to have done this since you have done a complete step by step video for the insurer's enjoyment. Cheers!

@stevenewsam6698 9 месяцев назад

Ford reman engines usually come without valve covers and ignition coils. Original installer grossly overtorqued valve covers and installed a damaged, mismatched set of used coils.

@gregorylewis8471 9 месяцев назад

That piece of paper you found certainly points out the re-man company's quality control. Excellent life lesson about anger management. Anger is a cancer that can poison your life. Get rid of useless anger and success pours in! 😁

@billyounger9713 9 месяцев назад

Thanks for that little nugget of wisdom at the end! I can relate to that! 😉 Cheers from Canada Pal!!🇨🇦

@deplorablelibertarian 9 месяцев назад

I had a moment of clarity about anger and success one day at work. I found I needed to channel my aggression and only let choice amounts fly. It has served me well so far.

@forgetfulme1719 9 месяцев назад

why angry, u get paid for the labor?

@GeneralSulla 9 месяцев назад

I just bought a Ford 3.5 for my wife's 2010 Ford Edge SEL from Gear Head. Now I'm worried! 😮

@HAL-dm1eh 9 месяцев назад

@@forgetfulme1719 Because the labor gets more and more difficult and tedious according to how much of someone else's job you had to clean up.

@wesleypulkka7447 9 месяцев назад

Ray, I can't believe the engine installers didn't bother to clean out the original valve covers and used broken parts! It's a sad commentary on what currently passes for craftsmanship! Good on you for wading into this swamp to help a customer!

@danmaynard1383 9 месяцев назад

It’s a damn shame that previous technicians didn’t care about the quality of their work, because it’s obvious that the owner loves this truck. You can tell because of how clean he has kept it. I’m not a Ford guy, but I’m happy Ray has this truck, and will give it the attention it deserves.

@saigyl9149 9 месяцев назад

agreed, you shouldn't have to remove the valve cover to verify an engine noise

@deplorablelibertarian 9 месяцев назад

No, the owner should have purchased a newer vehicle instead of spending 5 grand on a truck with 100k miles on the odometer....and is STILL having trouble.

@williameldridge9382 9 месяцев назад

@@deplorablelibertarian and your logic is exactly the problem with the world today. To you, everything is throw away. If you keep repairing the same vehicle for years upon years, you will spend exponentially less money than if you buy a new vehicle every time there is a semi-serious problem.

@matthewmcmaster2731 9 месяцев назад

@@williameldridge9382I agree with you 💯. The one thing that does make me sad though is that there isn't any car companies building cars today that anyone really wants to hold on to. I don't see anybody today building cars that are going to be the collector cars of tomorrow. Everything is bland and looks the same, at least until you get into the hundreds of thousands of dollars vehicles. Nothing for the hard working everyday person.

@mlg1783 9 месяцев назад

Sadly, most customers are nothing more than a price tag for most companies. They don't care about their employees either.

@bobmartens1089 9 месяцев назад

Back in the day.... we used to adjust valves with rocker covers off while running by ear. But I'm 9000 years old

@peterlennon1139 9 месяцев назад

No matter how your "opinion" of someone else's work may be subjective, they cannot argue with the broken stuff and paper left in the engine. Personally I believe if you are engaged to give your professional opinion then it's disrespectful not to take that without proof. Are they implying you're not good enough or a liar. I would be very angry at being forced to do unnecessary work. WELL PLAYED sir for keeping your cool.

@aleastwood1698 9 месяцев назад

I would agree with you 100%

@wallebo 9 месяцев назад

His personality is so much better than mine for sure.

@kellismith4329 9 месяцев назад

He also now has a file video to produce should he ever get that request again

@MikeKreuze 9 месяцев назад

It may be a frustrating and pointless task to run the engine without the valve covers, but it sure as heck makes a fascinating video.

@DonaldWells-wk8dc 9 месяцев назад

Like spilling turkey grease on the kitchen counter and it runs down on the cabinets😂😂😂😂😂

@CadgerChristmasLightShow 9 месяцев назад

I'm nervous as hell to take the valve covers off my cars at all, let alone running the engine with one off. Especially on an engine with the valve cover facing straight upward. One little bolt or washer or anything else solid falls in there and you're in for a bad time.

@DavidTMSN 9 месяцев назад

@@CadgerChristmasLightShowlol. A couple of marbels would be very interesting.

@mcporter03 9 месяцев назад

I think after finding the FOD, you will be asked to pull the oil pan, then run it looking at the crank 😮

@StrongDreamsWaitHere 9 месяцев назад

I certainly think he should pull the pan and check the pickup tube.

@papatomsthoughts 9 месяцев назад

@@StrongDreamsWaitHereagree, I think there are pieces of that paper in pan somewhere

@stephenmoulton9284 9 месяцев назад

@@papatomsthoughts the tiny video camera's

@DainSmart-vm7pc 9 месяцев назад

Hey don't give them ideas they might ask Ray to do that I think the oil pump in the sump mught be semi blocked as well.

@aleastwood1698 9 месяцев назад

Well said lol I think that's the next step, then when the engine locks up they will blame it on lack of oil.

@creigiihtondenynis39 9 месяцев назад

You have officially entered Triton 5.4 hell!!!!!

@billyounger9713 9 месяцев назад

You should make the engine builders name famous for us!! Its only fair!! Cheers from Canada 🇨🇦

@billhyde2303 9 месяцев назад

What a crazy way to start a day

@surfwaxcdn 9 месяцев назад

Super interesting video Ray. Seems like the engine rebuilder put some very stringent demands on your customer to fulfill to get the warranty. Almost like they were expecting him not to be able to fulfill them and thus weaselling out of a warranty repair or replace.

@opendstudio7141 9 месяцев назад

It’s understandable to be skeptical and protect your business from fraud. Novice engine tuning has blown up untold number of engines, followed by false warranty claims.

@surfwaxcdn 9 месяцев назад

@@opendstudio7141 fair comment. I wonder, is the refurbisher going to reimburse the owner for the costs of the investigative diagnostic? If it is shown it’s no fault of the owner I think that would be also fair.

@opendstudio7141 9 месяцев назад

@@surfwaxcdn I believe Ray stated that this is a warranty replacement engine. So, I take it that this will be the third attempt of remedy.

@MrAlienware1 9 месяцев назад

One problem problem problem problem people ppresent problems problem problems people people problem problem o problems problems problems po please open your phone òpppupoupupoupuoupupuououuoouuouoouppuoouuoououuopupupu,h

@dcgregorya5434 9 месяцев назад

@opendstudio7141 how would removing the valve covers prove someone didn't run too much boost through it? Genuine question.

@skatkat6885 9 месяцев назад

I've rebuilt 4 engines in my life..they are all still working some 15 years now. I cannot believe you found some paper in the upper engine! When I saw that in there.. i actually was taken aback in my chair.....my jaw dropped, my eyes widened, and i thought: "What the hell"!!. That alone should have been warrant enough to warrant the engine with NO questions asked.. and then I was shocked that you said you wanted to repair that engine. What I would have done with that thought, i would pull that engine out of the vehicle, put it on an engine stand and strip it to the bones and check out for any other "things" that may have been installed wrong. Then I would have tenderly put it back together . You sir, are a SAINT!!! In other words , i would have not taken the finding of strange things inside the engine..that paper looks like it may have been on the cam lobe at one point in time. Just guessing. Well, I'm old , what the hell do i know.....that is what young kids today think of anyone who has the amount of experiance that they have....but MONEY seems to be at play here. I recently put on over $700.00 of new cooper tires on our suv...i wanted snow tires, but ended up having m+s tires. (mud and snow), when they were finished they had put on a TOTALLY DIFFERENT type of tires on...RAIN tires...omg it's winter..why would i want rain tires....they even tried to convince me to keep on my vehicle what they had mistakenly put on. I heard them (WALMART) for almost 10 minutes that they were not going to put on what i wanted, but that i needed the ones on my suv. I guess because im old.....i was available to have whatever they wanted for me on my vehicle....or that I was just stupid or something lol. I finally got what i wanted..the cashier/writer of our appointment made the mistake of having the wrong tires. Things happen....not her fault totally....well, yes it was lol. but hey Ray, in the end...you can believe us or you can leave us right?!!

@Leonarco333 4 месяца назад

Even better is that they just slapped the gasket over the paper making a wick for oil to pour out of the valve cover. Excellent work by the stereotypical Florida man.

@Gary_in_NoVA 9 месяцев назад

Very interesting video! I’ve never seen an engine run without the valve covers before. Also, finding that piece of plastic sheet inside the engine is unbelievable! Speaks volumes about the engine builder’s QC.

@patlee9704 9 месяцев назад

It's quite common for a mechanic to run an engine without valve covers. It's a great way not only for some diagnostic purposes. Some older engines thatvwas the best way to adjust the valve lash. Sometimes it is messy depending on the oiling system but a good mechanic would do his best to minimize the mess.

@brianhook2108 9 месяцев назад

Gm small blocks with cylinder shut off was the best way to see if a lifter collapsed was by runn in g engine with covers off. Watch for which valve wasn’t moving and that was your collapsed lifter

@buckdashe2571 9 месяцев назад

I worked at a shop where the boss had deflectors you could attach to a small block Chevy that let you run without covers and keep the mess to a minimum. I think it might’ve been a JC Whitney thing…

@mikemccabe5492 9 месяцев назад

Ford has those too. Bolt to the top of the rocker stud. Use them for adjusting valve backlash. I think mine are Moroso. @@buckdashe2571

@poorfesor 9 месяцев назад

You used to have to run with valve covers off in order to adjust the valve lash. {:~)

@proudcanadian5713 9 месяцев назад

Excellent video showing your attention to detail and I could definitely hear the frustration in your voice. As others have said, a lesser man would be throwing tools all over the shop and cursing the Automotive Gods for saddling them with things like this. Good job, Ray and hang in there, buddy. The warranty company should be paying you dearly for this job and hopefully they're going to do the right thing for you AND the customer.

@joe5404 9 месяцев назад

What a pain! Your patience in a situation like this amazes me. Once again your professionalism as a mechanic shows throughout. Kudos to you my friend!

@jamessmoth8683 9 месяцев назад

If the warranty company sees this video they're going to deny the warranty because of that paper in the engine from the original install

@46bovine 9 месяцев назад

I hope Ray was billing by the hour for that fiasco. If the warranty folks don’t say it, I will , thank you, Ray!

@99domini99 9 месяцев назад

I'm pretty sure they made the requirements absurd on purpose in the hope that it discourages people from actually using the warranty. I can't think of any good reason why you would need a video of the engine running with the valve covers removed.

@nicholasmelfi4684 9 месяцев назад

Car warranties are just like any other, they don't care about you, just their profit lines. They screw the techs and the purchaser. @@99domini99

@lisaghost 9 месяцев назад

my father has a 2010 F-250 Super-Duty he been using as a yard only plow truck ( upstate NY here) and we have a friend doing some engine (top half) work on it, 5.4l 3v as well, let me tell you the damn parts we needed are so costly- each valve cover bolts- $9.50, Fuel Rail clips EACH- $44 no kidding!! and there is no Fuel Rail anywhere in the us , we called every dealer and looked on amazon but its a dealer part (typical) both manifolds replaced again as they were replaced back when it was under warrenty. many other parts we had to get so he can plow snow and this truck only has 38k miles on it!! anyway love your videos, they are so educational as always, thanks Ray!

@Refertech101 9 месяцев назад

Well some times it is the metal alloy used, all ways keep that in mind for why some thing costs a lot, and the alloy can make a huge difference when it comes to corrosion and tensile strength, I seen it sink a ship, guy didn't want to spend money so got cheap after market bolts, they corroded faster then the speed of light where the OEM's cost 4 times as much but barely had rust on em, I'm sure they're still good some where at the bottom of the ocean to which he accidentally dropped them!

@stevenmiller2837 7 месяцев назад

It's good of you to do this for your customer!

@darkdsoul2038 9 месяцев назад

the twister reference was caught and appreciated. RIP Bill Paxton

@Duganoz 9 месяцев назад

I had an ‘04 F150 with that motor. I changed oil every 5k and full synthetic. Still had big problems. Took it in at about 50k miles for ticking. They replaced some roller followers and only maybe 5 of them. I left for Florida (1500 miles on way) and limped home. It ran find as long as you didn’t ask too much. Couldn’t load the engine. Light pedal movements. Got home, took it straight to the dealer and traded it in. They gave me top dollar. They never even test drove it. It was super clean.

@Mech7.3 9 месяцев назад

That paper you found is what the cam phaser comes wrapped in. 🤔 makes you wonder. I hate warranty companies. Great job Ray🇺🇸✌️👍🏼

@alanvotta3847 9 месяцев назад

You have become my "shrink" .....After watching and witnessing your calm demeanor and carrying on with all obstacles I can and will be a better person spending time with you

@ford6 9 месяцев назад

That paper might have caused an oiling issue, that caused excessive chain and sprocket wear resulting in the rattle

@davedobson5869 9 месяцев назад

And that alone should be enought for a warrenty replacement as you don't know where all the paper is in the engine now. If it's plugging an oil port that could then start a bearing and thus cause the engine to lock up.

@jonsworld5307 9 месяцев назад

@@davedobson5869 nope they use that to denie warranty as its last shops fault for laving it in there not builders

@ralfie8801 9 месяцев назад

That depends, Ray said the owner paid for the Deluxe rebuilt engine, to me that means their top of the line build. It probably was shipped from the rebuilder to the installer’s shop with the valve covers already installed. If that’s the case, then the rebuilder will need to warranty it, or deny the claim for another reason.

@bigdaddymak1439 9 месяцев назад

@@ralfie8801reman engines come in long block form! No valve covers, intake, front cover, ECT. That's why there was sludge inside the valve covers

@ralfie8801 9 месяцев назад

@@bigdaddymak1439 I know how reman engines are built, I’m just not convinced that this Ford modular engine with VVT would be shipped without the aluminum covers to protect the expensive VVT sprockets they installed. That just doesn’t make any sense to me.

@shawnlee3495 9 месяцев назад

We can see Now how hard mechanics do work.! Thanks for showing us the real work done by GOOD technicians. We appreciate all you do, Ray.

@Tony-he8ze 9 месяцев назад

I hope you're getting paid to jump through these hoops. If nothing else you have evidence of a shoddy "rebuild". Always look forward to your entertaining videos. It's inspiring to watch the patient and thourough manner in which you perform every job.

@stevenichols4639 9 месяцев назад

I had to spend $2500 once to prove the water company had screwed up my water supply. I had to pay the money upfront and then they reimburse me when they found out they were wrong. I hope that somebody is paying Ray for this time.

@t5ruxlee210 9 месяцев назад

If the perps pay Ray for "the proof of what the obvious fault is" work, and Ray tells the owner what's wrong, can they sue Ray for disclosing coporate secrets, and then everyone hires lawyers ?

@AquaPeet 4 месяца назад

Have yourself a fantastic Dave, Ray!

@steveb6103 9 месяцев назад

The experience I had with the 5.4 is one of the reasons there's a Toyota in the driveway! 2002 5.4 2 valve, sparkplug launcher!

@billyounger9713 9 месяцев назад

Every morning, I look out to see my Toyota 4runner sitting there, and I still smile!! Cheers from Canada 🇨🇦

@SubmarineSquid 9 месяцев назад

If you look at time 54:02 on the bank 2 cam phaser, it looks very much like the cam phaser finger is not lined up with the "R" mark. This would definitely cause the P0345 as that is set when starting. The computer looks to see where the cam phaser is on start which it should have been in a default locked position. The cam phaser on bank 2 is definitely broken. That said, finding paper in bank 2 makes me think paper could be everywhere. Absolutely caused low oil pressure in certain situations as oil goes from bank 2 to bank 1. The pan needs to be pulled and cleaned at a minimum. The fact that the valve cover bolts were painted in place with the rubber grommets and tightened to oblivion is an extremely poor rebuild. I am so very disappointed in this Fraser rebuild. I would love for @FordTechMakuloco to watch this and make his opinion. Also, this Fraser needs to step up on this repair. 540k subscribers plus many more are directed to watch this video.

@zee4uu4me 9 месяцев назад

That was high end patience and positivity from your side. No comments on why they made you do it.

@sergiobarros6102 9 месяцев назад

Man, what a "premium" rebuild, huh? Thas was super interesting to watch, thanks Ray!

@Leonarco333 4 месяца назад

Yep. Those stripped bolts are weight savings for make up for all the extras included. That paper wrapper in the engine, the 50-100% extra torque, so many bonus features over a normal engine.

@Sir_Uncle_Ned 9 месяцев назад

This tomfoolery is standard procedure for shady companies of all kinds. They put up so many hoops to jump through that they expect nobody to actually jump through them and thus can deny all warranty claims. But here you are jumping through those hoops to prove a point. They never expect someone stubborn enough to jump through their hoops on principle

@opendstudio7141 9 месяцев назад

Quick judgement. All it takes is one employee with a hangover to taint your public image or reputation. Then we have the pandemic fiasco to consider, if that applies.

@armedfarm3429 9 месяцев назад

Thats what I was going to say also. They figure they will get you to quit doing all the stupid crap, and finally win the battle.

@Leonarco333 4 месяца назад

And then they deny the claim for running the engine without valve covers and “accidentally lose” all correspondence telling him to do it. Paying claims doesn’t buy a new super yacht for the ceo this year.

@stevens862 9 месяцев назад

Ray you do an honorable service for your customers! It’s ridiculous how bad a job that the previous technicians did. I know you will take care of this once you prove the problem and get the approval from the warranty company. You rock Ray just stay as you are, and yes you seem to be happy go lucky. We all can have a bad day but you never show it

@robpeabo509 9 месяцев назад

I hope the plastic debris pieces have not partially blocked the oil pick-up tube strainer. I know you said there was satisfactory oil pressure, however the plastic wrapper debris might have moved giving you good pressure now, it might not always be good. no matter what happens, if it is a phasor issue or not, the sump has to come off to look in the sump and at the oil pickup tube. Plus the fact that I would expect a total replacement because I don't expect an engine I paid for to have any foreign bodies in it.

@RaiderWolf-yd6nm 8 месяцев назад

Right, I have been amazed at your patience, and should be also about your chipper attitude.

@Jetmo 9 месяцев назад

Loved that Jedi move catching your ratchet! Great Video Ray!

@jamesedmonds6526 8 месяцев назад

I’m glad this truck is back. I really wanted to see it finished.

@donk7978 9 месяцев назад

While Ray is getting past the broken coil mess, I'm betting the exhaust manafold leak has broken manafold bolts nearby. 🔮

@johnt.848 9 месяцев назад

While underneath fitting the oil pressure gauge we could see the manifold bolts appeared to be new.

@Leonarco333 4 месяца назад

I would bet plenty of money that severely over torque on the fasteners sheared a couple exhaust studs because they were torqued to yield. Bet it blows a head gasket at some point relatively soon, too because the person who built it obviously doesn’t know what a torque wrench is.

@richardploeser4267 7 месяцев назад

Wouldn't it be nice if everyone who calls themselves "technician's", all had the INTEGRITY that you have! I am glad you and I are on the same page as far a integrity is concerned. Thaank you for what you do and HOW you do it! Duel Master ASE Master Tech, now retired. Richard

@innesm 9 месяцев назад

Good day to you Ray. Another fantastic video. As you say, somebody sat behind a desk, and probably knows nothing about engines, or even cars. It’s great that you video everything, then they will see the bodge up job done on installing the engine. Stay safe Ray , and keep these instructional videos coming. I learn something every time. Have a good day.

@heckelphon 9 месяцев назад

Hey Ray, when you say Nobody Cares -- well, we care! And you provide a great channel for us to watch, and to be glad all of the oil is spattering over you and your shop and not over us!

@skatkat6885 9 месяцев назад

🤭

@russelbaird3342 9 месяцев назад

As an owner of a 06 , F150 , 5.4 , this was very interesting . I have always maintained that the oil be changed on regular basis. I use synthetic and a 5000 mile interval . So far that seems to work with this motor very well . Thanks for this video . Stay safe , have fun .

@ImigrentfromMars 9 месяцев назад

I also have the 05 and change the oil the same. This is a good motor if you look after it,

@colchronic 9 месяцев назад

Well the problem with these engines is if you even skip one oil change or extend it to 10,000 or even 7,000 mi your engine is going to grenade on these particular engines I would change them every 3 to 4,000 mi even with synthetic

@HAL-dm1eh 9 месяцев назад

How many miles you got on yours?

@cengeb 9 месяцев назад

Syn oil doesn't need to be changed at 5K miles, waste of money, and creates more waste...it's 2023, join it

@HAL-dm1eh 9 месяцев назад

@@cengeb That very well may be so for your vehicles, but if you've watched enough tear down videos of these 5.4 3v's you would know what's up with the frequent changes. My 2010 Corolla starts its horrible sounding chain rattle upon start up right around 4K miles between changes. While that engine doesn't have the failures the 5.4 3v does, I take that as a sign that something is different in the oil and it's time to change. My 98 4.6 Expedition used to do the same exact thing. Plus, you get carbon and possibly metallic and other types of build up. The oil filter only does so much for this.

@johnhooton3286 7 месяцев назад

My 5.4 was a great motor until it hit 130,000 miles. Replaced timing chains, chain guides ( ends were breaking off ), oem plastic chain tensioners with metal ones, oem oil pump with melling high volume, both phasers and other associated items. Truck runs great and now has almost 200,000 miles. All oil changes were done on time ever since i bought it.

@johndesaavedra1040 9 месяцев назад

Back in the 1970s, early smallblock GM engines called for adjusting the hydraulic lifters on the fly with the engine at operating temperature.

@chatrkat 9 месяцев назад

This video, and the previous video on this truck, proves every argument I have on why I’d never pay to have a motor replaced, the vehicle would simply be sold. Only one exception, if Ray did the rebuild and installation, that would be okay.

@cranefly23 9 месяцев назад

Where can I buy some of that special ‘Engine Paper’? 🙀🤣🤣 Great video, Ray. I do wonder why anyone chose to ignore your experience and advice. 🤷🏻‍♂️ Watching a video like this only reinforces that I made the right decision NEVER to have anything to do with vehicle repairs. You, Sir, have amazing patience and attitude. I salute you.

@dotar9586 9 месяцев назад

I heard from a trusted source that blue shop towels will work as a substitute for "engine paper". (REEEE 🤣)

@OnzaRob 9 месяцев назад

I so agree with the positive attitude, in a service industry no one talks to you without something not working right, don't add to the stress!

@joshruner1348 9 месяцев назад

I understand Ray when you were talking about being in a bad mood. I learned after year 2 to just get it done cause it will make you a better tech an I take on the harder BS other shops would not deal with. I have found great enjoyment out being a Mobile Tech now never knowing what you will find next. Great job as always Ray.

@108gk 9 месяцев назад

In the long run all the mechanic has to worry about is having skills, knowledge and tools. The problems with the machine belong to the owner of the machine, not the repair tech. Let them get mad if they want to. Anger won't fix anything.

@michaelpressman7203 9 месяцев назад

In the past I've gotten the run around in different shops & told story's.I have a good understanding of mechanical & fell sorry for the mechanicly challenged

@ShevieMine 9 месяцев назад

I worked on cars as a hobby back in the '60s - '80s. I watch you working on today's engines, and I can't imagine what a PITA they are. There is NO room anymore.

@Aspie_Geek_UK 9 месяцев назад

I'm in the UK and my first car when I passed my test in the mid 1980's was a MK3 Ford Cortina 2.0L GXL (cost me £75). I loved that car but 3 weeks after I brought it the head gasket went. My dad said to me that as it was my car, I had to learn how to fix it myself. That started a life long passion for fixing cars and also restoring them. You are so right about the room under the bonnet, when I did the head gasket on my Cortina, I could actually stand at the side of the engine in the engine bay! Now even in my Mercedes SLK320 which is a 22 years old car I cant even SEE the road from any part of the bonnet, let alone stand on it!

@ShevieMine 9 месяцев назад

@@Aspie_Geek_UK I had a '69 Roadrunner with a 426 Hemi engine. It had more room under the hood than 4-cylinder cars of today.

@Aspie_Geek_UK 9 месяцев назад

@ShevieMine absolutely! It's ridiculous how they cram under the bonnets these days and still expect mechanics to work on them comfortably. I'm getting a Toyota MR2 Mk3 very soon with an engine with knocking big end bearings, but it's so tight that I'm gonna have to take the engine out so I might as well rebuild the whole thing while I'm there and make a few "improvements" lol

@ShevieMine 9 месяцев назад

@@Aspie_Geek_UK I hope it all goes as smoothly and economically as possible for you.

@valkyriesride129 9 месяцев назад

This was a very good video.

@criticaltemperature3343 9 месяцев назад

I'm only 20 min in at the "broken coil" and I already see a "this is how NOT to replace an engine " video coming in the near future. Cudos to Ray for the top notch work you have been doing to fix other "mechanics " top notch work.

@john_in_phoenix 9 месяцев назад

The "engine rebuild" people are likely hoping the customer will go away by demanding "proof". I do remember the bodge job they did with the wiring. Really sad they take money for such shoddy work. FYI, from the little I have seen of Dave, I really like him. He has a good attitude and sense of humor.

@turboturtle9083 9 месяцев назад

The engine rebuilder will see this and wash his hands saying it's the installers problem.the installer will wash his hands saying now that you have played with it its your problem now. The warranty was and is worth nothing,the automotive equivalent of musical chairs. It's now time for the lawyers to take their shares.

@vinceleto 9 месяцев назад

I bought a stethoscope from Harbor Freight when I had to find the bad rocker arms on my 3.6 Pentastar, shocker right 😂. Anyway, very good tool to find the exact rocker arms that went bad. Atleast you had this opportunity to make a cool video. I think that paper tells a big part of the story and the dirty sludged valve covers.

@davidcraven277 9 месяцев назад

The issue with the ejecting spark plugs was that they only had 3 threads holding them in we had one come out bend the fuel rail and start an engine fire

@matthewellisor5835 9 месяцев назад

Bet that made for an exciting day! I prefer boring most of the time.

@krusejonathan01 9 месяцев назад

That’s a 2v issue. This is a 3v.

@stevenallen1392 9 месяцев назад

You persevere, Ray. You're a shining example to us all regarding attitude and work ethic! Keep on keepin on.

@krusejonathan01 9 месяцев назад

@Fordtechmakeyouloco has built a career off the 3v. He knows this engine better than anyone else I’ve ever seen. The rattle on startup only is usually caused by HYD cam chain tensioner(s) leaking down. Operating it with this issue for long enough will cause damage to the cam chain guides and it progressively gets worse.

@bigdaddymak1439 9 месяцев назад

They probably used aftermarket timing components which is a big no no on these engines

@carlgriffith4660 6 месяцев назад

Ray, seeing you have to go through all you did and keep your wits and patience about you while doing it, reminds me of why I don't care to pop the hood on modern engine compartments today. I loved turning wrenches on the 60's and most 70's engines. The way these car engines and built and are installed today presents a real nightmare for me. I just don't have the patience for it after years of working on even big block motors under hoods with plenty of workspace and easy access to most engine components that were simple and easy to understand and evaluate. My hats off to you!!!!👏👏👏

@IR-nq4qv 9 месяцев назад

31:26 Ray: When was the last time you heard someone call something a "Doozy"? Trivia time: That's a Doozy phrase was first used when working on a Duesnburg

@geoffreysmith3196 9 месяцев назад

I agree with several other commenters here. It's pretty obvious that the engine builder is trying to dodge a warranty claim by demanding needless, time consuming, "diagnostic" work that they hope will either be physically impossible to do with the engine still in the truck, or will be disapproved by the customer, so that the claim will just go away. Kudos to both you and your customer for holding the builder to account for their work. Why was there foreign material found trapped under the driver's side valve cover, next to the cam phaser? Why were all the valve cover bolts over torqued? Why was the old sludge never cleaned out from the undersides of the valve covers, before they were reinstalled? That engine builder has a lot to answer for.

@olegoat6226 9 месяцев назад

"premium" rebuilt engine includes JB Weld repairs...good to know. Don't suppose you would name drop said company so we steer clear of EVER using their "services"? Another gem, Ray...educational and entertaining as usual!

@militarycoo 9 месяцев назад

Wouldn't be sure the rebuild is the same company as the install

@forgetfulme1719 9 месяцев назад

no name, libel lawsuit, if proved wrong later.

@scottmarshall3963 9 месяцев назад

54:32 - "I just do what I'm told!" Every time I hear Ray saying that, I can just mentally see the Wife Unit rolling her eyes, laughing ironically and going "Yeah, right!".🤣

@richardsmith2721 9 месяцев назад

Did the support agent suggest you turn off the engine and turn it back on again to see if the noise went away?

@lvlndco 9 месяцев назад

Check the bolt retaining the phaser and make sure it is properly made with the hole through it for the needed oil flow. Fordtechmakuloco showed an engine with a new timing job that rattled at startup and it had a defective bolt that made it through Ford quality control, it prevented the phasor from properly functioning. Replacing the bolt resolved the issue....they are one time use anyway so once he removed it to check it a new bolt was needed anyway.

@andyvitz 9 месяцев назад

Yeah I just hope this company is not going to try to blame you for anything that you find that's already broken that they messed up on that's why I'm glad you record all this because that was a great example with a spark plug cap being broken I forget what you called it but you know what I mean

@DinDooIt 9 месяцев назад

Unfortunately with all the tech nowadays, video can be disputed over claims of ai interference/manipulation, that's usually the first things they do to argue themselves out of a warranty and throw blame on the mechanic.

@stevenewsam6698 9 месяцев назад

A reman engine usually does not come with valve covers and coils. Its very obvious that the valve covers were not cleaned , just quickly spray painted. The coils were mismatched brands. Those issues fall squarely on the original installer..

@Aspie_Geek_UK 9 месяцев назад

@@DinDooIt not if Ray provides the raw footage if requested. I agree edited video can be called into doubt, but the raw footage is easily examined by an expert and proven to be genuine or not.

@DinDooIt 9 месяцев назад

@@Aspie_Geek_UK True, but doubt is all they need to deny a claim.

@wavelengthdesigns 9 месяцев назад

I just had a Jasper engine put in my 04 that was given to me with a sludged up engine, so far it's been fine but it does chatter a little on startup. Jasper was the outfit the shop I used was set up with, though my understanding is that all of the reman companies tend to be hit or miss with these with the one that supplies Ford themselves being a bit more consistent. My understanding is that the chattering is the cam phasers, as the chatter goes away pretty quickly. Nothing like this noise though. What concerns me is that Jasper is known to use the Dorman phasers as they are cheaper, and the current revision OEM phasers are a superior design. Guess we'll see if it holds up for the 3 years it's warrantied. Been watching a lot of FordTechMakuloco recently.

@motorbreath3 8 месяцев назад

You said the name I was thinking. I've had several issues with their rebuilds . Not sure if they are still at it or bought out by LKQ.

@garynewell6947 9 месяцев назад

good day to you ray another epic video hope your not too cold in the us its snowing here in the uk and its very cold but the most important thing is to have yourself a great day ray

@CrimeVid 9 месяцев назад

Chilly in SW London, where are you ?

@Aspie_Geek_UK 9 месяцев назад

It's -1C Here in Leafy Letchworth Garden City (35 miles North of London for our US friends) right now but not snowing yet... We always miss the snow... Even a few years ago when the Beast from the East hit the UK, here in LGC we didn't even get a full 1mm of snow at its worst! Even Thunderstorms can hit 15 miles away and circle round us and miss us altogether! I'm starting to get a complex lol

@blendy19 9 месяцев назад

"Shop Dog" a good touch. 🐕Love your videos and learn more each time. Been working on my own vehicles since the '70's. Now I am keeping up with the newer tech. Currently have a 2017 Toyota Tacoma Off Road.

@samuelcrossland1101 9 месяцев назад

That piece of paper likely said "WARNING! REMOVE BEFORE INSTALLATION!"

@donaldmickunas8552 9 месяцев назад

😂😂😂😂

@randybeard6040 9 месяцев назад

I have the Exact same Engine in my 2008 Ford, it will Rattle if not Run Everyday, I have Learned to Turn Engine over without Starting engine and most of the time the Oil Pump will send enough oil over Timing Sprockets, Phasers to Eliminate the Rattling Noise, I have about 110,000 on my Engine. This is a Powerful Good Pulling Engine, You must replace the two Part Plugs with New Ones Early On as they have a Habit of Braking Off inside Block. My next door Friend was a GM Mechanic close to 40 years, he removed all the old plugs without breaking any, Penetrated them good and left overnight and used a manual socket to remove them. He has done several since mine and never broken any but he takes his time...

@tomtke7351 9 месяцев назад

My own observation is there seems to be TWO distinct groups of people: (-1-) get er done and (-2-) enjoy the journey. Mom would hustle thru housework to sit down and read a book. She just wanted it done , i.e. get er done. Dad had a avocation to refinish furniture. He simply delighted at removing old finish to then carefully sand in graduated number sandpaper to perfection... then apply finish also to perfection. To him the journey was a simple delight. Life is a mix of both. However, if one can settle on a profession where one deeply enjoys the process along with a finished project/product then they will have better patience and payoffs... just sayin' Ray shows great detail in every step.

@Psichlo1 9 месяцев назад

Wow!. That's literally all I can say. How places like that stay in business is beyond me. The idea that you have to prove the problem in order for them to take the warranty claim seems ridiculous. Should just send them a picture of the JB weld busted coils and the paper under the valve cover; that alone should be enough to prove the quality issues without going any further.

@waynesitarz424 9 месяцев назад

I think the point was that no one would do it so the warranty would be unobtainium.

@saulpedraza645 2 месяца назад

They say things happen a reason , be a blessing to taken off valve covers discovered that plastic paper it had worked its way into oil pan gotten stuck in the oil pickup may had serious engine failure from oil starvation . Great videos ray keep up good work

@losoj30 9 месяцев назад

After seeing what I saw I would demand a new engine

@eddiebeaty8150 2 дня назад

I see you struggling at time working around wiring, hoses and such. I myself used wire (had a roll of electric fence wire) to tie these things out of my way. Saved a lot of time and knuckles 😜. Love your vids Rainman.

@jlattatorres 9 месяцев назад

I have been watching Ray for a couple years now. The truck is in great hands. (Ray if your reading comments its J.L from California with the Toyota Avalon) :)

@jankro1 9 месяцев назад

Catching that ratchet in mid air is called antigravity😂

@tomcrotty1498 9 месяцев назад

Well Ray, two guys, a chain fall, oak tree with a ditch. What could go wrong? Unbelievable installation. Some people should not be anywhere near cars/trucks let alone tools. Great job finding all the electrical screwups. Haven’t even watched the end of this part two video. Unbelievable.

@opendstudio7141 9 месяцев назад

Gonna need a case of brake clean now. It appears that everyone involved with this engine will receive an angular drive shaft reward in the rear end.

@mp5765 9 месяцев назад

Thanks for making this video because people don't realize what kind of stuff we have to do

@michaelnotigan7796 9 месяцев назад

The head surface under the paper was dry of oil with that wrapping paper in place. Once cleared out, watch that oil flow and make a mess! I admire your good cheer in doing what these warranty people want you to do. RU-vid is filled with horror stories about this engine. What is the recourse for an owner? Is a Coyote engine a viable replacement? I can't imagine any rebuild company wanting to touch these Tritons..... and then, find a warranty company to back up their work. But in this case, that piece of paper makes you think the rebuild on this engine was not up to standards.

@frjhracing 9 месяцев назад

the coyote swap is a tricky because the V width and valve cover size is relatively huge compared to previous Mod motors. At that, theres ecu swapps required and then you talk like the ac conversion. at one point i believe it was (power by the hour) that did a full swap with ac, ecu for 3v era mustangs. A more direct swap is the navigator 4v 5.4 which can be unobtanium, yet a much easier swap. Its also older than the 3v, but every else is the same like the bell housing and motor mounts, exhaust, etc...

@michaelnotigan7796 9 месяцев назад

I appreciate your reply and perspective. Many thanks!@@frjhracing

@MikeHensley-sc3ns 8 месяцев назад

Someone did a bang up job on that valve cover and coil job… I feel like this is every mechanic in my town, burn folks left and right by $2,000 at a time and something else failing in a week .. braking latches and hatches and stuff they had no business touching and even run all the fuel out until it wouldn’t start joy riding it… seen a woman in a bmw suv coming and jacked it up.

@grahamcockerill2406 9 месяцев назад

I did notice the oil fill cap was upside down that may be the problem 😅Aussie Graham

@deuceAl 9 месяцев назад

Murphy’s law number, I can’t recall the number, but it states that when gravity takes the object it will come to rest in the most difficult place to retrieve. On the floor halfway between both edges is common, but not as bad as in the darkest regions that can not be seen or accessed. That’s when the giggle wins over the explanatory gesture!

@michaelabbott511 9 месяцев назад

Love you videos, I would feel better knowing you video your work ,so they can't say you broke this or that, I also like how you just laugh off the stuff that would send most guys through the roof 😅😅keep it up.

@donmoore481 9 месяцев назад

I just finished replacing the timing chain assembly on my Ford E-350. The hardest part of the job was removing the valve covers. Part of the job was easier because the rear of the engine is accessible by removing the rear engine cover, however on the E series the engine sits way further down into the chassis and wheel wells. It took me about 4 hours to remove each valve cover. Even though this is a difficult job, the van is much worse to work on. Great job keeping your temper working on somebody's screw up.

@IndridCool54 9 месяцев назад

The 5.4 3v is no different than any other engine as far as maintaining your oil. I have an 05 F150 that I bought new with 25 miles on the odometer. It now has 335,000 miles and the engine has never been opened. The only major item I’ve replaced was the throttle body due to an electrical failure. I’m currently towing a 19ft travel trailer around the southwest US with the truck. Knock on wood, it even has the original coolant hoses, water pump, alternator, starter, etc. I did have to rebuild the transmission at 285,000 miles due to sheared splines in the 3rd/4th gear drive hub. I’m a believer in ZMax engine treatment and have used it every few oil changes. I’ve stepped up to full synthetic oil and have been using Valvoline 5/30 High Mileage. I’m also a believer in Wix filters and use them exclusively. Maintain your stuff and it will last. I’m shooting for half a million miles! 😎

@Bryan-Hensley 9 месяцев назад

I've got and had several Chevy vans. All of them made it past 450,000 miles without any issues other than a water pump or alternator. No transmission failures. I change the oil every 15,000 to 20,000 miles..they travel about 3,500 miles per month..

@ganjaguy800 9 месяцев назад

That brown paper piece is packing material for a new camshaft used during shipping. It's basically oiled parchment paper. Someone was probably using a piece or two to hold the cam as they were dropping it in and forgot.

@davidbaize4825 9 месяцев назад

What a mess Ray. We definitely need a follow up video on what will happen next. Me thinks a Coyote swap would be the real answer, lol. New valve cover, cam phaser, in the least for this engine. The customer should have had you to replace the engine in the first place. Now it will cost them dearly. Great video Ray

@masterofnone4951 9 месяцев назад

I've been feeling your pain, and then some. Heater core return pipe rusted and pissed coolant out, meaning intake manifold removal. '06 in the rust belt and everything seized solid. I'm jealous that you're not dealing with corrosion.

@davidwatson1460 9 месяцев назад

They make things difficult thinking you won’t go through all the trouble and they won’t be held liable.

@spencemccall8383 3 месяца назад

At the factory they install cam journals first, then line bore journals, then install cams. If cams are taken off, and journals not replaced by the number, it will ruin cams and journals.

@starsailor49 9 месяцев назад

If that’s a ‘premium’ install I would hate to see the ‘basic’ option!

@drewtonhouse 9 месяцев назад

Ray .. your attitude .. bang on .. I've been through the whole frustration thing .. once you see it / recognise it / see that it's not your issue .. life becomes so much easier ..