New Plasma Cutter Attachment 

Australia may have Kurtis, but we have I C Weld with his new light saber!

Cutting Edge and ICWeld on the same day - mana from heaven. Kurtis looks great in the welder's cap you sent him BTW. Much love from the UK.

Oh man that sawzall blade is for wood! My hats off to you for being able to cut welds out like that. Diablo makes really good blades, will save you alot of time and physical wear and tear on your body. Keep up the good work👍

I really dig that new plasma torch handle😳😳 and new tips those would be so handy !! The Gouging tip would be so nice !! And the regular cutting tip you would be able to reach into places you would normally not be able to reach !! I really like Hypertherm's way of thinking very handy new ideas !! Great work as always Thank you for filming this also . And yes in the words of Curtis 🤣🤣 👍👍👍

Issac, I look forward for your Posts. I don't weld but there is so much to learn about Planning and the logic you apply to all your work. I really enjoy seen your Son Working with you, he is fortunate to have a great Teacher. I noticed Many people View your Posts but Only a fraction will take the time to at least give you a Thumbs up for your Effort. know you are Appreciated

I saw Isaac whip out that long torch and an image immediately popped into my head. It was Isaac striking a Masked Zorro pose and slashing his name into a piece of metal. He's good enough with a camera to pull it off, too. Great camera work taking us along with your repair, Isaac!

*I C Weld* Bravo well done, thank-you sir for taking the time to bring us along. GOD Bless.

Issac, so amazing to have you as a resource. Every day setting the bar so high, yet you're willing to drop knowledge and scholarship on us and drag us along to look over your shoulder. Every video, every repair is an absolute gem.

Most guys cut plate with 18 TPI blades. Isaac cuts plate with 6 TPI (wood) blades! 💪

Always learn from you, ISAAC. ⭐️⭐️⭐️⭐️⭐️👍👍

Those new plasma cutter tips worked real well and made quick work of removing the metal you wanted to get rid of. Pretty clean as well.

Calling 3/16” steel “thin” is very telling of the stuff you work on. Lol

What brand of machine was that Issac?

Nice work as usual Isaac. Thanks very much for sharing. Your tack welds look better than most peoples continuous welds. Hope you are going on vacation. Enjoy.

❤SALUT PRIETENE FELICITARI FRUMOS ȘI NUMAI BINE 😊

Realy good video throuhout the entire re fab! As always the comentary is entertaining and informative.

the original welds on that thing doesn`t look brilliant.

I would have DIED laughing if an Australian accent would have said 'F**** off plane!'. I like the new light saber, it really gets off in there. Hope you stay cool this summer, be safe.

Issac, that new plasma wand is the cats meow, so to speak. That saw saw blade was a diablo blade. There are all bi metal blades. I use them on everything. They now have a circular saw blade that will cut 1/2 inch steel. Cleanly. Great video sir.

I watch you so much that now I make suggestions would the gouging rods be better in a instance like this

Isaac once again phenomenal job !!!!!!!!!!!!like how you use the wood saws all blade to cut steel,,,,,,, I’ve never tried that but that was a wood/nail in bed and Wood nail cutter demo blade you’re very fortunate you had that …….if you’re shopping for sawblades if you have a Lowe’s store in your area look for Lenix Lenix sawblades There about the best for saws all’s Lennox or Diablo are the top shelf the champagne Saw blades for demo blades for anything…I use the a lot through the years has been a carpenter and remodeling and demoing and handyman of all…. not like you as a welder,,,,, but I used them for everything else…. have a good vacation can’t wait for the next class Sam bacon from the East Coast

Since this is a part that already broke, could you have put a brace in the space behind it to give the ram more 'meat' to push against?

"I am not gonna say that was fun". LOL I know just what you mean! Hypertherm for the win. Twenty mins up the highway from here is the place they make those.

ok that new cutter looks like its excellent for really tight spots !

Like the New Plasma Torch. I need to get one, Oxy-Acetylene kind of makes a mess sometimes.

Fascinating. Thanks, Isaac. Beautiful work!

2 👍's up IC WELD thank you for sharing 🤗

Wow! That Hyaccess tip is terrific, especially the second one! Whether you will be doing less torch cutting now? We shall see. Thanks for another top-notch video.

Man, that new plasma cutter looks like a butter knife in your hands man! What a great tool for your tool box!

Perfect weld by muscle memory !!! Impressive I'm pretty sure that he could not see anything while welding that inner corner. 34:36

If the operator would pick the track Tonon up why’ll shooting grease this would never happen

Always enjoy watching your work! Some constructive criticism, have your latches face outward when making picks with multiple leg bridals/chains. The hooks are stronger where the meat of the hook is, causing less wear & tear on them. Also less chance of the chain slipping off the hook or putting pressure on the latch and breaking it

Those new tips are like a scalpel.

Great camera work

Sorry I've missed some content I've been way to busy for the tube for a while. Top level as always. All hail the algorithm.

Great new torch. That really gets right in there. Just so you know, it hurts when you hit your hand with a hammer and you might want to avoid it!

WOW. Hypertherm knocked it out of the park. I have a LE plasma torch regular 90 degree and reworking my smoker. PITA to cut inside the box and I have to accommodate the tip offset and the 90 angle. I sure would love to switch over to your setup especially with that long handle that mimics a acy torch. Problem is I don’t use it for making money. So I’ll just have to keep adjusting and grinding and finding other ways to do my projects. Thanks for all your torch work. Truly a Master.

New toys!!! What comes next, remote control metal eating bugs? Well Folks, you saw it first here.!!!!!!!

I give them a month before the other side breaks! Great work.

3-5 teeth in the material for cutting with any blade is the norm from what I recall. This is one of those obnoxious repairs that makes you pull out all the tricks. There is no perfect tool for this type of repair, but that plasma torch looks like it came in handy. I would have used a double cut carbide burr for all the finish removal work. It would be smart of the owner to have you do the same to the other side of the track for that idler pulley, or at least go as far as reinforcing the other side with some additional plate.

I'm ashamed of the engineering on the track. The track takes all the load and punishment of the machine to the ground. Of all places to go minimum metal strength. The track system is not one of those places. Hopefully, the other side doesn't fail soon for the customer. Have a happy 4th of July, everyone.

bad design overall or do you suppose someone forgot to weld the ends of the tube?

👍🏼🙌🏼 where’s the apprentice? Have not seen him lately nor the 4 legged superintendent cruising the shop

WTF?! Where do I get that attachment. I've could have used that so many times throughout my career and saved so many headaches...!

When you tapped on that plate with a hammer, the only thing I could think of was "Stwike him Centuwion!!". I don't know why. Probably brain (Brian) damage. You've got quite the lightsaber there.

That had to be one of those 5k Chineseium excavators. That frame looks brand new no rust. No wonder there so cheap there made of low grade tin foil.🍻

Beautiful fit"up & well"up... ..... A'HO

I learn something new almost every episode Issac. Thanks for sharing. Best Wishes to You and Your Family.

Both of your channels are great (CEE)! I'll say it for you.. F Off plane!! 🤣🤣

That would be a really handy plasma tip. Being straight would make it super handy for some jobs. We don’t always get perfect setups in perfect situations doing field welding repairs on heavy machinery

I've got a bigger reciprocating saw than that and i don't half make you numb with it shuddering be careful as that's not good for your health

I always learn something from your videos. Thank you for taking the time to make them

Isaac I am a couple minutes in I will prob finish this video tomorrow. I just want to comment on your method of tapping the material to determine thickness. I know you mentioned it before but I just noticed you doing it and thought it was cool. Thanks for sharing. You the man.

I like that straight tip for the torch need to get one of those.

Issac, wonderful video, that new Hypertherm torch head looks super duper handy...... I had seen them at the LWS, but did not really think about the ease of getting into such tight places...that was tight as a crab's ass in there, Water Tight !!!! Have a wonderful 4th of July, Best Wishes from Orlando , Paulie Brown

I like the overlapping tack method going uphill far more than running a downhand bead with solid wire mig. I used to do it that way and got some criticism for it too until i hot broke some pieces in the press and showed the penatration.

Thanks for the video I.C. you get to play with all the neat new toys😁 hey thanks for taking us along on the project, wish I had some of these welders, plasma cutters etc. when I was working on car projects. Ok sounded like you were heading off on a vacation, have fun, see ya next video.

I like that plasma cutter a lot...very nice bit of kit. Nice tidy work Isaac as always , well worth watching

I've learned a ton from watching your videos, keep them coming!

Tight spot nicely done That’s a handy new plasma torch there Cheers from Nova Scotia

What is the name and model number for the new attachment?

This is why you send things to IC WELD. Its right first time.

Another fine job like always. Love your videos.

Its like you can see the repair in your mind behind the metal. You are an amazing sculptor!

Issac when chipping slag can you use an air hammer with different tips might save a finger pinch I cut mine and added 8 inches to it just a 🤔 love the videos

Hi from Nacogdoches. Excellent work from a true Texas craftsman.

Please do not stoop to Kurtis' level by using profanity on camera.

I know its part of the job, but that situation you had with the tube wall against the frame- that drives me nuts lol but I guess its designed to be built not repaired lol great work

That plasma cutter end is awesome. I dont think i would have a use for it but i want one anyways. Great video as always.

"For all your piercing or gouging needs, the Plasma Pecker is here!"

That C style Lenco ground clamp is a serious clamp. I need to buy one also.

Nice! I guess that hole is just for access, or hydraulic? Not a pin place obviously or you wouldn't get into it. Grease gun tensioning, right?

Air chisel might have been a better option in that tight space I saw you thump you hand with the hammer.

Thank you for sharing , always a pleasure follow your project, i learn a lot, from Quebec ,Canada 👍👍👍👍

Muito bom trabalho como sempre amigo!!!

if we had 5 dollars for every time we hit our self's hammering we would be rich

New plasma heads definitely have their place!! I believe it's on Facebook, someone is advertising a flexible MIG tip. Not sure about the quality.

Thank you very much for the time you spend making these videos

Yours is one of my channels. Yoy keep your cool, even though the work and locations look hot. You break the job into little pieces so it's not overwhelming. Lots of admiration for a true craftsman!

In shock that you used the sawzall! Those new plasma tips are really a game changer.

very nice work, thanks for the lesson

Those plasma nozzles certainly are different!

That blade is made for cutting wood. Sorry bud

HyperTherm seem to be on a roll with great equipment. But, to have great results takes great skill and you ain't short of skill Isaac. An interesting repair.

Worse thing is they'll probably want you to do the other side next! Lol

Lots of times I could have used a nozzle like that. 😅 I don't need to tell you that things rarely break in a convenient place. 😭 I'm not a pro welder, just a guy that's gotta keep the farm running. Love your channel! -John

Always an interesting video! Thanks.

I think the slow mo guys use mirrors to keep their cameras from getting ruined. Keep that camera safe, and keep the content coming, this is one of my favorite channels. Cheers

Slick torch and tips. Repair is super solid. The other side may be showing up shortly for the same repair.

Hey Issac, I just bought one of those vodo magic eraser. ( Plasma Cutter) Used it first time yesterday. It was only on 18ga but I had a couple circles to cut and it worked well. Never used one before. I'm rebuilding a 65 F350 dump truck. The box is well damaged and will put my new cutter to the test. My oldest grandson has access to a press brake and drop off 1/8" steel to make the replacement sections. Life is good here in Wisconsin!! Thanks

.. IC... nice new toy...:-)

Good Video

Really nice looking job. Stay Safe!

Every time you go vertical up you use a series of tack welds. Very disappointing. You should be able to make one continuous vertical weld without letting go of the MIG trigger. You're supposed to be a master welder. Very disappointing whenever you go vertical up.

WOW!

No hate just trying to understand the thought process, why did you use short circuit and that tack weld method? Wouldn't it be more appropriate on 3/8" to run FCAW-G or Pulse Spray uphill in a continuous bead?

those old tools are best, they were built as a quality tool not built to a budget

They make them cutters any longer we'll have to start calling you Zorro

Hİ IC. Could you try arc gouging with steel electrod like 7018 and blow the molten metal with regular air gun? It may be the first on the internet.

wax stick lubricant works wonders to cut down on saw blade friction on jobs like this..that Hypertherm extension sure is a game changer in obtructed cutting..nice work