New Process Gear 261HD Transfer Case - Weekend Special

Подписаться 900 тыс.

Просмотров 1,1 млн

50% 1

All right folks you demand these long videos well here you go and I'll give you all weekend to check it out! This is the re-assembly of a NP261HD Transfer case out of a Chevy 2500HD 6.0 4x4. Hope you enjoy it!
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the *ALL NEW* SMA A-Store and help support the channel! : astore.amazon.com/httpswwwy083...
If an SMA Video has helped you out please consider giving using the "support" link on our RU-vid home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair.

Авто/Мото

Опубликовано:

4 фев 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 934

@toshtwentythree195 8 лет назад

""" This is not a premium channel so you are not going to get premium content """ Are you kidding me ? I live in the UK so many of the cars you work on I wont ever see let alone work on... Im missing a really great film on the telly because Im watching you,,, So my answer to you Eric , yes it is..Ive looked at most of the mechanics on here and the RU-vid garage.. You sir are addictive, You sir have a very beautiful wife and daughter, ..The amount of time videoing, editing, outtakes camera positioning and uploading is staggering.. Thats a lot of time and effort , just of us...This channel isn't premium its PLATINUM .

@paulkirkland1535 7 лет назад

Tosh twentythree: I'd say it's super platinum,it is very addictive but it's the good kind.

@jamesfrend2351 7 лет назад

Tosh twentythree []

@billburkart9087 7 лет назад

I Agree.

@gt500knights 5 лет назад

Agree totally. I've learned so much from eric, it's begun to alter my approach to vehicle diagnosis and repair. Its unbelieveable the level of detail vehicles are designed with today, so that requires a highly detailed mechanic for diagnosis and repairs. Eric does an amazing job illustrating his D&R, and that to me makes this a very addictive PLATINUM channel.

@georgematthews2935 5 лет назад

got to agree with you tosh.i live in the uk but find this channel great PLATINUM

@rbarr1200 8 лет назад

Even without out part 1, this was awesome. Big thanks to the O family.

@grizzlydan8 8 лет назад

+Ricardo Barron + I agree. I enjoyed and learned.

@SouthMainAuto 8 лет назад

+Ricardo Barron Thanks man!

@dwoodog 8 лет назад

+Ricardo Barron Agreed from me too. I'll probably never have to do this, but Dr. O made it look easy.

@firedog1116 4 года назад

This is the quality guy we need in every town in the US. He does the stuff no one else wants to do, and then videos the process. Ethical, conscientious, and hard working. Eric, you are truly a model for everyone, and we all love the videos. Thank you so much for your dedicated time and efforts. Best content on RU-vid by far! Superb!

@robertv8851 3 года назад

Eric your a great mechanic, thank you for taking the time to do this.

@livalittle100 8 лет назад

An hour long SMA video on a friday morning. Perfect way to start the weekend.

@theoldwizard998 8 лет назад

I love Mrs O sneaking into the frame ! Keeping it real !!

@mawolff23 8 лет назад

I love that you comment on the door more than I even hear it. Glad to see you are busy, it's always better than slow.

@WareWolf801 6 лет назад

You make some really good videos. I think it's great that your phone rings, the doorbell goes off, and people are coming and going at your place. That is what keeps you in business. Seeing your other half, helping you is nice too. Thanks for showing us all how things work, and sharing your time. Take care, and please keep making videos, if you can.

@scootertramp4355 6 лет назад

A very good alternate for silicone is Three Bond 1184. It remains pliable and can take several hundred degrees of heat. The beauty of Three Bond is that whatever migrates out of the gasket surfaces breaks down into very small soft granules that will not plug pumps or galleries or harm bearings. Several builders use it for motorcycle engines and have great success with it under severe racing conditions without failure.

@robertsmith9756 8 месяцев назад

Agreed 100%, I love the stuff also sold as YamahaBond and Hondabond. The other sealant (in my opinion the correct one) for Transfer cases is Loctite 518 Gasket Maker Flange Sealant. I build and repair a lot of Chainsaws and Three Bond has never failed me.

@Charles_Mulberry_7977 4 года назад

This was one of the first SMA videos that I watched years ago before Eric was famous.

@Bighead-he8zb 5 лет назад

Absolutely awesome! Stop second guessing yourself that we aren't going to like the video. It was great. They are always great.

@wolfparty4234 2 года назад

Even after 5 years this is still a great video bro!!! Thanks for being and keeping it real! 💪🏼💪🏼🔥🔥🔥🔥🙏🏻❤️👍🏻🤣🤣🤣

@arcdraw 8 лет назад

The door bell and phone add a bit of suspense to the video. Glad we get to see the assembly transfer cases are a bit of a mystery to me.

@SSMan-jo6tf 5 лет назад

I love your videos,interruptions are part of working on cars! It always happens. The fact that you don’t cut them all out,makes your videos the best I’ve seen,hands down,they’re genuine and I for one appreciate every bit of it! THANK YOU!

@promenacegaming5402 4 года назад

@51:00 Oh man, I love it when Rods come out to say Hi! It means you were having a good time!

@kunu98 5 лет назад

Learning from this channel is priceless knowledge. Really can’t put a price on it, and with the amount of detail, it’s like you’re right there helping

@crapper1 8 лет назад

your videos can never be too long as you make them very easy to understand what is being done even for people like me who always took cars down to walmart for oil changes now am under there draining and changing it myself its quite enjoyable

@tomoakhill8825 5 лет назад

Eric says, "This is not a premium channel so you are not going to get premium content." I love this. Many of the *great* artists say this same thing. To make a great film in any medium--theatrical film, television, RU-vid--you need a dozen or more specialists. e.g. cameraman, lighting, audio, script writer, screen play writer, star-actor, editor, director. There is a distinct Oscar award for all of these professions, since they are all hard and are all essential. The reason I became a monetary supporter of South Main Auto Repair, is that the large team of people who work on these videos are all the best in their professions, and each and every video they make is superb. Of course all of these many people are Eric O. It is an extraordinary thing to watch his output, particularly because he is unaware of what an exceptional act of genius each of these is. In addition the family bits he includes are so heartwarming, and his extreme excellence as a Master Mechanic is a joy to watch. Talk about giving the customer the best you can, and Eric O. is the canonical example.

@willgeorgiadis6472 5 лет назад

I've recently started watching your videos and have to say they are the best on RU-vid. The doorbell and noises just make it feel real. As a new tech your videos have helped me out alot. Keep on doing what your doing

@felixrosa241 5 лет назад

This video was great Mr O! I've always wanted to see the guts of a transfer case and you delivered. Also, no apologies for the interruptions. At the end of the day you have a business to run and a family to feed!👍🏼🇺🇸

@rosscharlie5349 8 лет назад

1st class job You are a clever bugger really when you aren't goofin' around. Trying to convince us your not What ever your hourly rate it your worth it an then some, I'd reckon . Finding a good mechanic is one of life's musts .Retail parks nah, schools maybe pubs I don't drink Doc's possibly A 1st class mechanic a must nothing else matters other than may be a sparky and plumber Your town should consider its self lucky Take care to you and yours Eric

@547Rick 8 лет назад

Eric, our friend from Canada (Steve Rob) told me that this was a premium channel. I will have to agree with him. Nice video! I understand now how a transfer case goes back together. The only thing I can see that was lost from the deleted disassembly video. Was the verbal interaction from you. I hate to miss any interaction that might make me laugh! LOL! I learned a lot though. Also great seeing Mrs O. Even though it was a short visit. You keep putting up the videos and I will keep watching.

@peterparker371 3 года назад

Thanks so much for taking your valuable time to post all of these videos. I watch one almost every night. As an aspiring mechanic, I really appreciate it.

@johndesaavedra1040 2 года назад

I'm enjoying going back through the older videos. I always learn something. Rather than fixing these issues, I mostly just select vehicles with few problems and take care of the maintenance.

@sixpacksandsrts9122 8 лет назад

ERIC. feeling your frustration over filming this. It was obvious you were kinda questioning if it was worth it. But. I for one truly appreciate the time and effort you put into your videos I do not make vids and do not understand fully all involved but do know it is not easy. So all is appreciated and your channel is one of the best informative mechanical channels to view. :)

@SouthMainAuto 8 лет назад

+Jason Curry Thanks Man!

@headylynn 8 лет назад

That's funny about the door bell & phone..to me that's a good thing it means your a great mechanic and everybody trust you to work on there vehicles..I don't mind the door bell or phone on the videos..😄

@SouthMainAuto 8 лет назад

+Heather Horstdaniel :)

@redracer811 7 лет назад

Thank you so much! I had my chevy 2500hd with the NP263XHD rub a hole in the case and self destruct. The primary failure was a needle bearing on the planetary assembly. They do make a funny squeal when one of those bearings lock up and spin the shaft while going down the freeway. I was able to order the parts and do the complete rebuild myself thanks to your video. It ended up being about half the cost of a newly rebuilt transfercase.

@jamesprice1253 Год назад

Nice to see a good mechanic take the time out to show how to do the job right way. Thanks

@TheDisgruntledMechanic 8 лет назад

OK I'm officially the last guy staying around until the end! ring ring ding ding great video Dr O!And I am glad you did this part even though the 1st part was lost.

@SouthMainAuto 8 лет назад

+The Disgruntled Mechanic Hey at least some one stuck around haha

@philiptipping6738 5 лет назад

Eric. To come back to a job after a week, is truly amazing. Just need a bigger work bench, with room to set out parts & tools.

@fenx1200 8 лет назад

I've been watching your videos for some time and they have inspired me to start a little business on the side, since I have a full time job, but I enjoy turning wrenches and getting dirty. Your videos have kept me up to date with scanners and how to use them, plus professionalism when doing the job the right way, and not using the old strip-thread trick. I worked on my friend's 1992 Mustang GT today, after doing some research on the net, and now the word is spreading around. I'll be visiting your site on a regular basis. Thanks, Bill's Hi-Tech Advanced Auto Repair. I am not that Hi-Tech or advanced yet, but I plan on getting there.

@SouthMainAuto 8 лет назад

+fenx1200 That is good to hear Bill, I wish you the best in our new endeavor :)

@carldillon624 5 лет назад

I have been watching for about year Love Your Show , Should Be On T.V. Keep UP THE GREAT JOB

@Ottonic6 7 лет назад

I watched the whole 1.5 hrs... I don't even own a 4wd... Great stuff Eric. Thanks!

@consaka1 6 лет назад

Don't know if I mentioned it before but I learned myself a tip to keep squeezed silicon from breaking off inside cases and then plugging the oil filter. notice the inside edges of the case halves are really sharp. Chamfer those a bit so they are not sharp. two benefits are they are less likely to cut you and the sealant fills up the "V" instead of squeezing out in a fine ribbon that can then break off easily.

@arcburn3364 3 года назад

Not only are you a top notch mechanic, but a great video producer too. I loved the Buster Keaton era footage.

@RealCadde 8 лет назад

Like "we" said in your previous video. If you accidentally delete or format the data isn't gone. It's just not indexed. As long as you don't record (write) over the old forgotten data you can still recover it, a process that once started takes no more than a minute. This is why for sensitive (top secret etc, like your porn folder) data needs to be deleted through very elaborate or physical processes when it comes to storage mediums. For instance, if you want to re-use the storage medium you delete the file with a program that overwrites the data with random bytes several times over. Because even if you overwrite data once there's still trace amounts of magnetic or similar fields of the old data. It is possible to restore even overwritten data but that process takes a very long time. And if one doesn't want to re-use the storage medium you shred it in a metal shredder. Depending on how sensitive the data is, shredding can be done to where you have 16th of an inch big pieces of the storage medium left. And if you are really paranoid, melting it down ensures complete deletion. Then there's degaussing which applies such a strong magnetic field that all data wipes irrecoverably which also damages the storage medium. Again, you can degauss several times if paranoid and then shred and melt and send on a rocket to the sun... All depends on the contents of your porn folder. ;) ...... But yeah, a simple format doesn't mean the data is gone. You can recover it really quickly with the right program. Many of which exist as free to use software. So please, next time you accidentally format your card. Recover it before you record on it again.

@RealCadde 8 лет назад

+Cadde Or for a comparison that may lie closer to heart... "OOOOPS, i filled my diesel tank with petrol... Well, off to the scrap heap the car goes!" When in reality, as long as you didn't start the engine (to varying degrees) you can still salvage your mistake. A diesel tank full of petrol can still be flushed. Right?

@SouthMainAuto 8 лет назад

+Cadde A lot of guys mentioned that in the first vid but at that point I had all ready wrote over the card several time. Ohhh BTW I don't have a porn folder. I have a gorgeous loving wife....

@toroon 8 лет назад

Yes Eric......Time to go home. Too bad about part 1. Excellent as usual.

@johnkinnane547 8 лет назад

Well done Eric, the good thing about your vids is it shows how busy a shop can get and how you prioritise your jobs. It's nice to watch a real auto garage at work warts and all. Kind regards Tassie John

@SouthMainAuto 8 лет назад

+John Kinnane Thanks John!

@sabergermd 7 лет назад

Great video. Loved the B&W footage and silent movie music. Getting ready to work on mine as soon as it gets above 50F in the driveway. New transfer case motor going on.

@chrisryan5668 8 лет назад

Hey Eric i am 16 years old and i just started going to college to be an auto tech this year. I was able to graduate high school early because i was homeschooled. As cheesy as it sounds i just wanted you to know you are one of my biggest role models and i really appreciate all the effort you have put into these videos. I'm not far from having watched every single one of them from beginning to end. I have learned a ton from your videos and i was curious as to how you started out as a technician and what advice you would have for someone my age trying to get into the field?

@AdrenalineRushMX 5 лет назад

can i have some update about your choice? just curious.

@DaytonaBlueHr 4 года назад

Yeah what happened with everything 🤔

@1FishinAddict 2 года назад

He probably does butt-massage now as most of them tiktok videos open them youngens up to a whole new dimension of career choices.

@tomtke7351 2 года назад

CONTINUOUS exposure to real world is beyond valuable..... classroom, real ojt, or Eric + SMA

@truthisweareallgonnadie. 8 месяцев назад

Hello?

@PineHollowAutoDiagnostics 8 лет назад

@14:30ish..."metric crescent wrench" hahaha good one Eric!

@deepsquat600 8 лет назад

+motoYam82 shes a squirter! ..one finger go around! ....Priceless Eric ")

@dc5723 8 лет назад

+deepsquat600 O wonder if Vanessa O reads these comments :)

@snw56 8 лет назад

+motoYam82 I heard Eric say that too!

@zoidberg444 8 лет назад

+deepsquat600 Get your mind out of the gutters people. haha

@JohnzCarz 8 лет назад

+motoYam82 As long as it's calibrated.....it's all good!

@robertgelley6454 6 лет назад

Wow! Love the intricate detail you do! The whole process! Awesome!

@SteveNorcup 2 года назад

"Don't give up good enough for perfect". Thanks for sharing this!

@adampoconnor 8 лет назад

I love how whenever you smack a bolt down with an impact you always say "Make sure to torque that to spec"

@SouthMainAuto 8 лет назад

+AvidAviator you need to listen close for the click...

@ShainAndrews 7 лет назад

1:09:40 I feel like he meant NP205. Probably one of the most commonly used all gear transfer cases out there. 202 does exist, but not terribly common. I think the 202 is larger than the 205. Space constrained Jeep might make it a challenging fit.

@cedarhatt-vx8kf Год назад

Yeah, big fan of np 205

@robertgelley6454 4 года назад

Nothing better than SMA for how to fix cars. Eric, thank you for your great content!

@davetopp105 5 лет назад

Good silicone for the case would be "The Right Stuff" - Black. Once applied, it needs to be assembled within 5 minutes. You can fill the case after about an hour, and it seals very well. That stuff holds on tight. It's a pain to remove, but it stays put and won't float off once applied and dried. I just did a timing chain on my 2013 Kia Soul, and the timing cover case needed to be sealed off. It did the trick.

@denniswilkinson1118 8 лет назад

A great video as always. Another good lesson. Thanks!!

@theoldwizard998 8 лет назад

We should start a "go fund me" page to buy Eric a 55 gallon drum of brake cleaner !

@SouthMainAuto 8 лет назад

+theoldwizard998 Hahah ahhh brake clean :)

@spirittomczyk2174 4 года назад

Watching you install the seals, and you saying to be careful installing the seal so the spring does not jump out. I was taught by an old timer (which is kinda funny because I have been a wrench since the 60'S) to pack the spring side of the seal with grease. This method has worked for me for many years & have not popped the spring out installing the seal.

@somerandomguy3868 7 лет назад

I've swapped out a couple transfer cases, thanks for taking the time to record this

@risc19 8 лет назад

Great video again Eric. On the plus side, maybe you could get sponsorship from a doorbell manufacturer? You could showcase the very latest in door chime technology!

@SouthMainAuto 8 лет назад

+risc19 Haha hmmm no auto channel has done a door bell review yet have they?

@RealCadde 8 лет назад

Thank you so much for making these videos Eric. I know it's hard work (and IMHO you still take way too good care of us viewers, not that it's a bad thing) but you stick it through til the end for us so again muchos gracias!

@SouthMainAuto 8 лет назад

+Cadde Hey no prob, I am fixing this stuff any how, might better film it right?

@jimmymyers9245 6 лет назад

I am very glad I found your video on this I have never done a transfer case until this week and found your video very useful mine was a 261 LD and almost identical . thanks again for this video !!

@lowerdesert9577 3 года назад

Ld?

@brandonwagner6111 2 года назад

My fuse was actually blown! i changed the switch 3 times and it would work for a while then kick into service 4wd before it finally stopped working and now i know why! Thank you!!!

@sickasifoa9254 6 лет назад

Best video. For transfer case keep it. Simple Great Job

@av8tore71 6 лет назад

I think with everyone watching your videos we need to buy stock in Break Cleaner as you started a trend!!

@elizabethstampsmillsaps8608 7 лет назад

Thank you! This was very helpful. I am about to pull my NP263HD GM 272 out of my 2004 2500HD. You've given me a lot of tips. I appreciate it!! -E

@andrewvillanueva4222 3 года назад

When you are a awesome mechanic everyone wants you to work on their cars. So hard to find a awesome mechanic. Love your videos!!!!!

@retroguitarmaster 8 лет назад

this channel should have way more subscribers, i've seen videos where people mumble through the whole thing and the editing is shit, one time a guy dropped the camera and didn't even pick it up for 2 whole minutes and it made the cut, and somehow end up getting like 200k views, meanwhile you have possibly one of the best auto repair channels out there and its a hidden gem in youtube

@SouthMainAuto 8 лет назад

+Samuel Gonzalez Thanks man, it is the crappy videos that inspire me to try to make some better. It is a bit frustrating when you are on a YT how to vid and ya cant see a dang thing happening or the vid is shaking so bad you get sea sick :)

@Eastahtata 8 лет назад

+Samuel Gonzalez It also helps that Eric does things properly so you can trust the information. It's not some hack cutting a hole in something to get quicker access or any other half-assed attempt of repair, so you pretty much wasted your time watching the video because you want to do things right.

@darrylmcleman8765 6 лет назад

good to have metric crescent wrench!!!

@gregwlotzka120 5 лет назад

Thank-you for your in depth video, started pulling apart an old transfer case that was fried, contemplating rebuild so I have a good spare. Your video helped my understanding alot. Thank-you

@walterk1221 5 лет назад

Smiling as I reminisce about doing very similar job on a NP241DHD... on my garage floor.

@seniorjuanvaldez 8 лет назад

so... GM China division was snowed in? lol

@SouthMainAuto 8 лет назад

+Grease Munkee HAha right!?

@justinp8946 8 лет назад

you're awesome Eric!! you're vids are so good

@Cavalier_Steve 8 лет назад

Love Eric's videos it's a shame that he lost the first part but he done very well with explains things in this one. Cheers Eric!

@LFTDoffroad 8 лет назад

Excellent! Being a jeep and 4x4 guy, this was right up my alley. Thanks Eric O.

@SouthMainAuto 8 лет назад

Hey no prob. A lot of the transfer cases are very similar so a lot of practices can transfer from brand to brand

@aday1637 4 года назад

Marvelous video on the inner workings of a transfer case!!

@haywardsautomotive6156 8 лет назад

Before I could afford a bushing driver set I used expandable freeze plugs and they worked great. The rubber held the bushing from collapsing and the metal disc pushed the bushing in with no damage and they're still under $5 today. Learned that from a 45 yr crusty mechanic when I was a teenager and started working at a garage & now I am the 40 yr crusty mechanic so for the DIY or young mechanic starting out there is my tip I'm passing on. I'll stay watching when I'm not working on cars myself b/c the ringing & beeping is the sound of a busy SMA making $$ to pay the bills and the videos are edited so I don't get it.. Charlie Chaplan would be proud of you for the engine download B&W video & music. Great video as always!

@grizzlydan8 8 лет назад

+Robert Hayward + Good tip Robert, thanks.

@SouthMainAuto 8 лет назад

+Robert Hayward That is a fantastic tip, thank you!

@haywardsautomotive6156 8 лет назад

+South Main Auto Repair Thanks but I pass this credit on to a 70 yr old mechanic named Irwin that showed me so many tips. He taught me if you couldn't afford the specialty tools how to think outside the box and use what you have available so I am passing it on like he did for me. He was retiring about 6 months after I started working there so he tried to teach me as much as he could and pass on all his tricks he learned along the way. He was a great mechanic but he taught me some bad tricks also like how to charge up condensers on the distributor machine and put them on your bench and parts counter waiting for some poor unsuspecting person to come up and grab it and get shocked...simple things amused us. We had an overhead oil dispenser that could pump in 5 qts in seconds and if one of the other mechanics was getting smart we'd fill up their back pocket with a couple qts. We had fun at work!

@esmith836 8 лет назад

Great video Eric! a family member worked for GM and went to Shanghai China to get a "building" to build GM engines in China! go figure. Made in America parts are very hard to find. Vehicles prices sure don't reflect the cheap China garbage parts you get from a dealership. They still sell a vehicle at top dollar.

@SouthMainAuto 8 лет назад

+eric smith buy low sell high, it is the American way!

@MrJcardimen 8 лет назад

Really glad you did a video of the re-assembly. Very helpful, and I'm not sure the disassembly would have added much.

@SouthMainAuto 8 лет назад

+Jeffrey Cardimen Well we just covered a little bit more in depth on the power flow is all.

@mutationbuilder3446 5 лет назад

I just watch all the diag videos incase I have symptoms I'll be on the up and up, I'm by far no mechanic but I'm good at taking stuff apart..all my works done in the shade. This is probably the most in depth knowledgable channels I've came across

@FordTechMakuloco 8 лет назад

Expert!!

@SouthMainAuto 8 лет назад

+FordTechMakuloco Hey Brian good seeing you here, thanks man!

@alexbrophy6885 7 лет назад

South Main Auto Repair Wow what a great video seen a lot of your videos you have so much vast knowledge! Have you worked in a shop that specialised in diffs and transmissions?

@markegan5330 5 лет назад

Van isn't even in yet

@robertcooper376 3 года назад

I like to see new brakes systems

@robertcooper376 3 года назад

@@SouthMainAuto also I like that a woman change brakes for I like that

@jdfinch1229 8 лет назад

Love rebuilding transfer cases, but not the smell of gear oil. This video needs some more door bell! Lol

@SouthMainAuto 8 лет назад

+JD A Haha oht he dreaded door bell!

@JD-iu3vi 6 лет назад

I got the fever. The fever for more doorbell.

@playsndirt5075 5 лет назад

Let me tell how much money you saved me with this video. I am an industrial mechanic but have never taken a transfer case apart. After watching this video I was able to replace my NP261 pump. Later I pulled it back apart and did a complete reman. Your camera angles and tutorials while you’re wrenching are first class. Thank you! 🙏🏼

@EJ22bakadesu 8 лет назад

It's always hilarious to hear "you're going to want to torque that to spec" followed by a blast from the impact. ;) Gets me every time.

@SouthMainAuto 8 лет назад

+lhutton If you listen close you can hear the click :)

@PeteWall 8 лет назад

"You're gonna want to torque that to specs", rails on it with the impact wrench...

@SouthMainAuto 8 лет назад

+Pete Wall click...

@johnsharp3999 7 лет назад

NP 205

@williambeauchemin9536 4 года назад

I use to buy my Bearings from the Dealer too, until I went one day to a Bearing dealer! They always matched up the Bearings because they did not have Bearings just made for vehicles, but they always gave me what I needed at much better cost big time! Just a thought.

@adamkorekach9936 Год назад

I’m gonna try this!

@Mrspinout007 7 лет назад

Thanks for posting this. Bought a cheap used '00 Silverado and a year later I have discovered I likely have worn a hole in my T-case. I've been on the fence all night on whether to buy a used/reman or rebuild it. After the video. I'll rebuild it. With 200k on the truck, a refresh and inspection won't hurt anything. Though the comments on the doorman replacement housing is concerning. I'll have to hunt for some real world reviews on it. Thanks again!

@pczapp827 8 лет назад

Permatex Anaerobic Gasket Maker 51817 or 51813 Ever tried that for transfer case halves ?

@SouthMainAuto 8 лет назад

+pc zapp Use it here and there yes

@NotHarry-er3wg 6 лет назад

More and More Anaerobic Sealant is making its way in main stream auto making. Im not sure I agree with all the hype but if the premise is solid, AKA, if it is a fact that it only hardens under the pressure surfaces. I have seen residual ( the squeezed out product) just as hard inside the engine and outside the engine, just as solid as Ultra Black Grey or other performance sealant (RTV). Anyone else have any thoughts or experiences with these sealants? Thanks for the Videos

@Forest__Spirit 4 года назад

“lemmie go grab the torque wrench” hahahaha i knew you were going to grab an impact

@777fuzzypeach 8 лет назад

Yet another fine episode. Please keep them coming. I am about to tackle the valve cover gasket on my 300K Toyota Tacoma. Pray for me.

@geraldluque9607 4 года назад

I did the trans case in my 97 dodge 1500. I got the parts kit and chain set from our local 4x4 outlet for under 200.00.had problems though, turned out the factory put gears and chain for a 3/4 ton in the 1/2 ton case.

@rsage_ 8 лет назад

South Main Auto Repair: More Betterness

@SouthMainAuto 8 лет назад

+Rodrigo Sagebin :)

@markcody7025 8 лет назад

"oh she's a squitter" LoL I lost it. That was from the 14 year old part of my brain sorry. Keep up the great work. Great videos.

@MyLifeThai371 Год назад

I just finished rebuilding my NP 261 HD transfer case today. Thank you so much!

@PS-pe6nc Год назад

Great video! This is the first video that I’ve watched that addressed the jingling sound . I’ve talked to several mechanics and got nowhere. You talk to us and tell us what , why and how to get R done. ( Sorry, I had to😁) I’ve learned so much from you. Now I’m gonna tackle my 261. Thank you, Eric!

@ekrubab1 8 лет назад

great vid eric......but you think when you got the truck all back together you could have tore it all back down just to show us..............just saying lol

@toyotatechMDT 8 лет назад

"She's a squirter" I just spat my coffee out laughing! Also, what model is your metric crescent wrench?

@toyotatechMDT 8 лет назад

Great video, very funny Mr O! We watch what you post because it is all good stuff!

@SouthMainAuto 8 лет назад

+Toyota Tech gotta watch out or you will get blasted :)

@harveysmith100 6 лет назад

As a ball park figure, all Cresent wrenches are metric after 1998.

@1337penguinman 3 года назад

@@harveysmith100 You really want to mess with a new guy in the shop? Ask him to grab your crescent wrench, then when he comes back with it yell at him "No, the Metric one!"

@kevinwoodcock7578 8 лет назад

Liked this vid so much i stumbled on it and watched it again.. The "metric crescent wrench" still kills me.

@alfredocarpaneto5976 5 лет назад

Just rebuilt my NP261 HD and if you work on dirt bikes a fork seal driver tool works on most of the large seals for this case and it works as a support for when you have it on the bench. Great video, you remind me of a good friend of mine who is also a mechanic.

@fil1329 Год назад

If u had an np205......u wouldn't of had to rebuild it

@upallnight888 8 лет назад

There's a difference between Wing Wang parts made in China and Wing Wong parts made in China. I'm sure the GM parts made in China are made at the Wing Wang factory, because you don't want to use the Wong parts in a GM. LMAO

@johnipennie2021 6 лет назад

Ha ha!

@av8tore71 6 лет назад

There are over 6000 Wong parts in the parts manual, that's a lot of Wong numbers

@ET_Don 5 лет назад

Wong parts! Now that's funny, even if it is a 2 year old post. lol

@nl1cat 5 лет назад

Cheap Chinese parts are made because we buy them. The Chinese are fast learners and can make quality stuff too. Just watch them !

@Cheepchipsable 5 лет назад

If they were any worse than locally made GM wouldn't use them. They are not stupid.

@anti0918 8 лет назад

You should do something special when you hit 25,000 subscribers!

@avalonangling 8 лет назад

+brian0918 You git outta here! "Thet thar "hoodie" or "T" is headed north o' the border.... I have devised a wave form/flow chart that will allow me to de-sub and then re-sub @ approx . the 3 second mark and "snipe" it right oot from under ye

@JSchrumm 8 лет назад

+brian0918 Yea he should have his hair dyed brown, 36 yrs old and looking like father time. "ding dong" enter sandman.

@HUBBABUBBADOOPYDOOP 8 лет назад

+James Schrumm That trait is part of his character- just like the "color pattern" of your avatar dog. We all have nuances that make us unique.

@JSchrumm 8 лет назад

Right like father time. And a dog.

@CubasAutomotive 6 лет назад

brian0918 already over 100k now... how time flies

@MrOkrick Год назад

Man your info on this rebuild EVEN THOUGH IT WAS THE SECOND PART..IS INVALUABLE.I am about a week away from re-building my transfer case..your info gave me some very important knowledge..thanks man..the black silicone in the pick up screen is from the factory..you and about six or seven other channels that have a video about re-building the New Process GM 261&263 etc ..show the black silicone as it has plugged up the screen filter this starving the unit of proper lubrication.. end result ...🔥

@phillully4472 5 лет назад

Nice job Eric, glad i was able to watch this part of this transfer case rebuild ! I'm not 100% sure but it looks just like mine in my 2001 GMC Jimmy... learned a few things here! Thanks for being diligent in the reassembly phase. Take Care till your next video.

@GarthGoldberg 8 лет назад

I get parts for my VW like water pump and serpentine belt tensioner and they're expensive, but they still say "Made in Germany" and the quality shows. And maybe no more expensive than Genuine OEM GM parts.

@SouthMainAuto 8 лет назад

+Garth Goldberg The seals in this t-case were like 60 bucks each... GM and their China crap is getting out of hand. Glad I drive a good American made Honda I tell ya that!

@GarthGoldberg 8 лет назад

+South Main Auto Repair Geez, I was right. That is just as expensive as Made in Germany.

@GarthGoldberg 8 лет назад

+South Main Auto Repair Our next car is going to be a Made in Ohio Honda.

@SouthMainAuto 8 лет назад

+Garth Goldberg Good, better off not buying this GM Chinese stuff lol

@GarthGoldberg 8 лет назад

The most "American" car is the Toyota Camry (80% USA content). I'd buy one-it's a great transportation appliance-but I think the Honda Accord is a little more of a driver's car, and also Made in Ohio.

@goodguy555 8 лет назад

Awesome video! Any chance you know how to fix a vw quantum synchro?

@SouthMainAuto 8 лет назад

+goodguy555 I don't know what that is but I'd be willing to tear it apart...

@goodguy555 8 лет назад

+South Main Auto Repair good, I think schrodinger needs some help. Hahaha

@SouthMainAuto 8 лет назад

goodguy555 Nah he is premium with a pay channel... much better than me. My stuff is only free.

@travispeoples 6 лет назад

This was the first SMA video I watched... I rebuilt my personal NP261LD transfer case in the process! Helped me a lot... saved a ton of time! We also own a 2009 Honda Odyssey it's my wife's daily driver same as Mrs. O!!! those videos have helped me tremendously as well... Thanks man... great videos... you're my favorite yankee! haha

@PeteyG708 8 лет назад

Not bad!! Thanks for the lessons on the Transfer Case. I have a 98 K1500 Z71 and I rarely use the 4WD, but it has come in handy quite a few times. Nice to know how it works. I just have to say... Is anyone else not bothered by the phone and doorbell? I'd be the last subscriber hanging on that Eric mentioned, because they do not bother me at all!

@SouthMainAuto 8 лет назад

+Pete Gaytan III Haha glad you are there to stick it out to the end Pete :)