New Rage Cycles 2017-2018 R6 Fender Eliminator Install | SportbikeTrackGear.com

Подписаться 141 тыс.

Просмотров 46 тыс.

50% 1

The New Rage Cycles 2017 and up R6 Fender Eliminator is in a class all it's own. It includes LED Signals, Plate Light (you can install it without the plate light if you choose) and mounts up high and tight to the under tail of the R6 for a super clean look. You can pair this up with their Front LED Signals and dial in your R6 on both ends.
New Rage Cycles Yamaha YZF-R6 2017 and up Fender Eliminator
www.sportbiket...
New Rage Cycles Yamaha R6 2017 LED Front Turn Signals
www.sportbiket...
New Rage Cycles Yamaha YZF-R6 2017 and up Mirror Eliminators
www.sportbiket...
www.sportbiket...
www.sportbiket...
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to orders@SportbikeTrackGear.com or leave a comment. Don't forget to subscribe!
/ sportbiketrackgear
/ stg_moto
/ stg_moto
blog.sportbike...

Опубликовано:

12 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 121

@chicagor6700 6 лет назад

Brian's mechanical abilities and demonstrations never cease to amaze me. Learned a lot just from his vids back in the day. Hope to see new install videos on the New Rage products on the newer 15+ R1.

@anarchy8793 4 года назад

I just put mine on my 2020 R6 your video helped the process go some much smoother

@sportbiketrackgear 4 года назад

Happy to hear you found this helpful. Enjoy that new R6! - Van

@FrenchysPlaysTV 3 года назад

I was going to ask about resistors because most people don't bring that stuff up. I appreciate that you did.

@sportbiketrackgear 3 года назад

NP thanks for watching! - Van

@K_24_ 6 лет назад

2:27 Hahaha, "big piece of shit boat anchor" hilarious. Really sweet fender eliminator but man its so tucked up, cops must give you shit for this one.. might try my luck anyway though.

@wardock03 6 лет назад

I had the same fender on my ninja 300. Never got pulled over because of that. Just keep the license plate light and you're fine

@Kalasbra 6 лет назад

i even ordered this before i got my 2018 R1 !! installing it tomorrow! Thanks!!

@sportbiketrackgear 6 лет назад

We have been selling a ton of these for the 15-18 R1 since we added them to the site. Look awesome on the bike for sure. - Van

@darnellhamlin3917 6 лет назад

I've installed this on my 2016 zx10 front and rear. Very clean and very bright

@butlerville23 6 лет назад

I really wish you could do the 2018 R1 installment for this eliminator. Great video by the way bro 👌🏾

@xKYLAFORNIAx 3 года назад

love it when Brian starts swearing... lol it's peak Michigander ;)

@sportbiketrackgear 3 года назад

Real people use real words. - Van

@menace2society310 6 лет назад

That’s a good look for a tail tidy 👍🏻

@sportbiketrackgear 6 лет назад

The design in unique and the quality is good. Really like the OEM connectors on the wiring harnesses. IMO this New Rage Cycles stuff is going to be super popular. - Van

@diemman70 6 лет назад

I’ve always liked their products.

@danielpichardo4878 4 года назад

Just installed last week! Love it! Video helped so much! Thanks

@sportbiketrackgear 4 года назад

You are welcome and thanks for watching! - Van

@frankdahtank1234 4 года назад

Awesome look. I’m planning on getting it for my 2015 r1. Seems easy to install but my only question is, is the plate stuck to one position? I don’t want to get pulled over cuz the “plates couldnt be seen”. Will the plate be fixed in one spot or is it adjustable?

@oSnapMillerTime Год назад

A lot of riders dont even ride with plates

@evercastillo3318 4 года назад

Yes I really like this incredible

@_Fox_Dye 6 лет назад

For the one's hating in the product "you can't have both signals and fender eliminator for that price" for this specific bike 😉 this product is awesome💯

@oSnapMillerTime Год назад

Its pretty crazy this is the only plate mount that is so slick. I looked and looked and nothing comes close to this and it is insanely expensive.

@sportbiketrackgear Год назад

New Rage for sure has some of the coolest fender eliminator kits. As for the price everything is too expensive. Go buy some eggs. - Van

@ttuckerTNT02 4 года назад

You should check out Intelligent Lighting Systems. They use the daytime running lights and can turn those into blinkers. Really sick lookin stuff!

@sportbiketrackgear 4 года назад

I will try to look into that. - Van

@syxxphive126 6 лет назад

Gotta ask Brian, why would you ever want to remove your mirrors on a street bike? The tail looks fantastic, but I’m always worried about visibility issues. I want other drivers to see me.

@blue03r6 6 лет назад

I've never tried the bar end mirrors but a few guys told me they can see behind them better with them than stock mirrors.

@rybrownw 6 лет назад

When you are wearing gear you really can’t see the cars behind you using the stock mirrors on a sport bike 🏍

@syxxphive126 6 лет назад

Roy Brown I haven’t had that problem. Not only do I think it’s dumb to remove the mirrors, in many states they’re required.

@HollywoodStyleLimo 5 лет назад

Jessie VaineoHurst no it’s not dumb! If you ride a sport bike when you lean forward you can’t see nothing on the stock mirrors, you can see much much better using bar mirros. Even a single bar mirror is more useful than the stock one.

@MADLITS1K 4 года назад

Why do people that are constantly scared ride? Lol some places people ride with their mirrors tucked in anyways, especially if it’s a place where they are allowed to lane split, stop whining 🤷‍♂️👎

@geese7484 3 года назад

Thank you 🙏🏽 this video really helped me

@sportbiketrackgear 3 года назад

You are welcome and thank you for watching! - Van

@ali19186 3 года назад

Just got done putting mine on stock front turn signals it’s flashing normal

@ali19186 3 года назад

Kinda wish the led for tag light was a bit brighter

@sportbiketrackgear 3 года назад

Thanks for sharing that. There must be enough load on the circuit with the stock front signals. - Van

@blue03r6 6 лет назад

wow that's a nice frigging kit. ok off topic brian, what model handy industries lift are you using?

@IAMTHE1_ 3 года назад

Hey I'm in Michigan to😁😁😁

@sportbiketrackgear 3 года назад

My favorite state is this great country of ours. - Van

@dyfahey 6 лет назад

Is the installation similar to the 2015+ R1? Will you be making an install video for that?

@DisplacedLogic 6 лет назад

Almost make me want an R6.... Almost.

@sportbiketrackgear 6 лет назад

Sounds like you have a 675, also a kick ass bike. - Van

@DisplacedLogic 6 лет назад

Sportbike Track Gear The new 765. I’ll look into seeing if they fit! Thanks for the info!

@vauldur3385 4 года назад

If you had to, could you bend the plate frame to make it "more legal?" or will it crack the finish off?

@sportbiketrackgear 4 года назад

It will bend a bit before you have any issues. Just don't push it too far. - Van

@SquidRider 6 лет назад

"New Rage Cycles" has some hefty price tags, holy cow. Love the looks though.

@anarchy8793 4 года назад

I paid 150 for mine

@MADLITS1K 4 года назад

Lol if you compare it to cars aftermarket tail lights range from 3/400- 1000s$ .. this is cheap for what you’re getting tbh

@wade_v4 4 года назад

i wanna know if i can adjust the plate angle to normal before i buy this

@sportbiketrackgear 4 года назад

You will have to bend the bracket if you want to change the angle. - Van

@Crustyto3z 5 лет назад

Imforomative, great video!

@jimnicketta5926 4 года назад

at 15:08 is there any reason the tail light didn't turn on when you turned the key on? At 20:00 it's on, so did anything else need to happen to make the tail light turn on?

@sportbiketrackgear 4 года назад

Did this a while ago so memory is a little foggy. I would guess I had it unplugged while I was testing the plate light. Nothing special needs to be done to get the tail light to illuminate. - Van

@lucasberntson8100 4 года назад

I just installed this on my 2019 r6 and now my front accent lights and my tail/break lights don’t work? Any suggestions on fixing this??

@sportbiketrackgear 4 года назад

You need to double check your work. It sounds like there is an issue with the install. Retrace all of your steps very carefully. Hard to diagnose this over the RU-vid comments. - Van

@2elements539 2 года назад

Did you figured out the issue tail/break light ? I just installed the fender eliminator on my bike. But now the tail light don't work

@twowheelsr6 4 года назад

It flashes to fast when you install it. What can you do to put it back to normal settings??? That’s the reason why I haven’t order this yet.

@sportbiketrackgear 4 года назад

You can install the New Rage Cycles Dual-Load Equalizer. Here is a link to them on our site: www.sportbiketrackgear.com/new-rage-cycles-dual-load-equalizer/ - Van

@twowheelsr6 4 года назад

Sportbike Track Gear okay thanks.

@keloniomannamoinolk7153 4 года назад

8:27 hello sir, that cable when tightening the screw is crushed between the metal and the plastic? really?

@sportbiketrackgear 4 года назад

It needs to be routed in the center of the bosses so it does not get crushed. - Van

@LoneWolfTD 6 лет назад

Are reusing the washers that were under the oem bolts?

@0878825983 6 лет назад

Very good idea. bro!

@FuturisticViper 6 лет назад

does this company support older bikes i would love this kit on my 2009 ninja zx6r

@sportbiketrackgear 6 лет назад

New Rage is expanding their catalog all the time, but they have not done anything for the Kawasaki ZX-6R thus far. Keep an eye on our site, we are updating as they offer more products. - Van

@sorasswag 4 года назад

Is this the same for an 2017 r1 like follow the same steps?

@sportbiketrackgear 3 года назад

Yes the install would be the same on the 2017 R1. - Van

@norberto570 5 лет назад

How much is cost that I just buy some part from you guy

@cjschmitt4882 5 лет назад

Where you racing bro? Grattan? Gingerman?

@sportbiketrackgear 5 лет назад

Max and I will be racing Wera at Grattan here in MI and Barber in AL this year.

@cjschmitt4882 5 лет назад

@@sportbiketrackgear nice...I raced GLRAA & Were way back in the day....Grattan much fun! Happy race season!

@evercastillo3318 4 года назад

ok thanks friend i like i will buy it

@sportbiketrackgear 4 года назад

This kit looks amazing on the R6. - Van

@StyloMakes 6 лет назад

Is the license plate bracket stuck in that position or is it able to be moved more upright?

@hyperwolfco8021 6 лет назад

TRAPAHOLIC I’m pretty sure it is a fixed position

@_Fox_Dye 6 лет назад

TRAPAHOLIC you can bent it a bit that is what i did

@loganburnett4263 4 года назад

Is that plate legal in VA?

@sportbiketrackgear 4 года назад

Sorry I am not familiar with the regulations in VA. - Van

@JusttCalebb 5 лет назад

Is there anything to slow down the flash rate?

@sportbiketrackgear 5 лет назад

Yes you can install a resistor to slow the rate of flash. Here is a link to them on our site: www.sportbiketrackgear.com/new-rage-cycles-dual-load-equalizer/

@quagmire1130 4 года назад

I live in Cali so I would get hassled a lot for the license plate lol

@sportbiketrackgear 4 года назад

For sure there are different levels of enforcement everywhere. - Van

@georgeuntalan1 6 лет назад

can you put that in r1 also?

@MasterJjt242 2 года назад

same process for r1?

@sportbiketrackgear 2 года назад

It will be very similar for sure. Thanks for watching! - Van

@chrisknight3681 6 лет назад

Looks sweet but no doubt in Texas that’s gonna get you pulled over and even worse the military police aren’t letting that one go.

@sportbiketrackgear 5 лет назад

Important to know your area before installing something like this for sure. - Van

@SuperTigerBalm 5 лет назад

@@sportbiketrackgear can you bend the plate to make it slightly more visible? if yes im purchasing .

@markaldrintangco2881 6 лет назад

Does the hazard signal still work?

@sportbiketrackgear 6 лет назад

Mark Aldrin Tangco yes they are still fully functional. - Brian Van

@markaldrintangco2881 6 лет назад

Sportbike Track Gear last question sir! Is it compatible with the integrated tail light? Both NRC signal light and integrated tail signal lights blink together?

@sportbiketrackgear 6 лет назад

Yes it will work with an integrated tail light no worries. - Van

@pyrusmasterdan1 6 лет назад

Hahahaha piece os boat anchor 😂

@4id4n97 Год назад

Anyone know if this would work on a r7?

@sportbiketrackgear Год назад

New Rage his fitment for the R7. We have the parts here to shoot an install and will try to rock that out next week. Here is a link to them on our site: www.sportbiketrackgear.com/parts/yamaha/yzf-r7/2022/?_bc_fsnf=1&brand=382 - Van

@chrisbrown-gr2xy 4 года назад

i watched this even i don't have a superbike

@sportbiketrackgear 4 года назад

You have to admit this is a beautiful fender eliminator kit. Love those LED's. - Van

@Rohit-qt2ve 6 лет назад

How bright are they?

@sportbiketrackgear 6 лет назад

They really pop IMO, visibility will not be an issue with the signals on this kit. - Brian Van

@hoanghatn123 6 лет назад

can I install that for my yamaha R3?

@sportbiketrackgear 6 лет назад

No they do not have one yet, pretty sure New Rage is working on one now. Keep an eye on the site, we will add it as soon as it is released. - Brian Van

@abhijithks6827 4 года назад

Can this get in india

@sportbiketrackgear 4 года назад

We ship internationally using DHL or USPS. - Van

@evercastillo3318 4 года назад

can i put the r6 2020

@sportbiketrackgear 4 года назад

Yes this will fit the 2020 Yamaha R6 as well. - Van

@evercastillo3318 4 года назад

@@sportbiketrackgear ok thanks friend i like i will buy it

@hataaurider 6 лет назад

It's expensive more brand?.....Not bad..

@jrsantiago69 5 лет назад

Alsome product just pickup 1 also for 19R6

@lelandsmith3827 5 лет назад

Apparently this guy doesn't realizes you need a torque wrench to torque bolts

@sportbiketrackgear 5 лет назад

If you need a torque wrench to install a fender eliminator you should really consider taking the bike into the dealer to have it installed. I will guarantee no experienced technician will pull out a torque wrench to install a fender eliminator. - Van

@keloniomannamoinolk7153 5 лет назад

Ok but 150 dollar???? you are crazy.

@sportbiketrackgear 5 лет назад

We sell a metric shit ton of these, super cool part IMO. - Van

@keloniomannamoinolk7153 5 лет назад

@@sportbiketrackgear I think it's perfect that I sell a ton of this product. Obviously people buy without knowing. Just two pieces of metal. amazing.

@oSnapMillerTime Год назад

Link to one that looks as good. I agree its insanely expensive but I cant find anything else short of just not having a plate.

@Mike_Oxmall Год назад

isn't that plate illegal? Tucked in?

@sportbiketrackgear Год назад

This really depends on the area you live in and how something like this would be enforced there. IMO if you are not street racing odds are you will not be hassled. - Van