NEW! SpeedyBee just released their first WING flight controller (and I'm impressed!)

Подписаться 172 тыс.

Просмотров 34 тыс.

50% 1

www.speedybee.com/speedybee-f...
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingiverse.com/painless360
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/painless360.
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#drone #painless360 #review

Опубликовано:

6 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 210

@dutchmetalmaniac Год назад

thanks for sharing Lee. this looks like an awesome piece of kit. very versatile. and the price is as nice as the board itself!!

@willay747 Год назад

Just ordered this and looking forward to it! Thanks for video!

@Jay-zc7iq Год назад

Oh yes 👍 this looks great just what I need for the summer , awesome content as always appreciated sir 🙏

@Bishop-FPV Год назад

Bought two of them yesterday. Thanks for the excellent preview.

@wattage2007 Год назад

Nice, comprehensive review and great to see some competition in the 405 scene!

@Bryanslifebelike Год назад

Just noticed this stack the other day, perfect for my inav/arduino boat that I want to build. Thanks for the breakdown.

@mickelson8332 Год назад

Spot on Lee, looks like a winner to me, thanks for the review

@seanyfpv Год назад

the bluetooth connection for inav with the app, or ardupilot with mission planner is so cool! thanks for sharing Lee! very excited about this new board

@Etyop Год назад

Thank you for this video Lee! I would have bought if it would have been more futureproof concerning the use of F4 instead of F7. Lets hope they come with an upgraded version soon, they are killing the market prices and its so nice to see

@Videolinquency Год назад

Great news. Even though I love soldering, I feel my own tinkering will always put the board at some level of risk, not to mention the reliability of all my amateur joints in flight, and this product will obviously reduce that worry.

@davidwatkin1484 Год назад

Nice piece of kit, excellent video thanks. Just ordered one

@mikekelly6774 Год назад

With the Matek H743-Wing having gone from $80 to $125, this is a nice option.

@visioneerone Год назад

remember when a guy could pick up F411-WING boards for like $40 bux? Competition is a good thing.

@craigreynolds4449 Год назад

hopefully better warranty too

@techstuff6829 Год назад

The Matek F405-WTE or F405-VTOL would be closer competitors.

@AerialWaviator Год назад

This is a function of 743, 745 chip pricing. Only the F722 has not shot up like a rocket, but it has limited onboard memory, so can not run Ardupilot. F722 works good with INAV.

@birdmantelly007 9 месяцев назад

I bought mine in Australia good price and good delivery. Assembly and soldering very straightforward. Flashed it on Inav with Windows 11. Waiting now for SBus Receiver. Summer is on its way. Thankyou for the tips.

@bjornkullberg3793 10 месяцев назад

I am very pleased with mine. I really like the possibility to connect wireless to configurator with my Ipad. I have used this every time out at the field for changes. I modified my old F4F Wildcat with this and had a lot of fun😊

@MrApache64AH Год назад

just ordered one, so I can't wait for your video for a wing in the summer!!

@Painless360 Год назад

Maybe an INAV 6.1 series on a new mini-wing coming soon ;)

@MCsCreations Год назад

Fantastic review, Lee! Thanks! 😃 SpeedyBee is killing it! I love their FCs! But I agree, I want a F7 version! 😂 Stay safe there with your family! 🖖😊

@seanyfpv Год назад

if there is a f7 under like 80 bucks that would be INSANE

@MCsCreations Год назад

@@seanyfpv Right?

@upperechelon3456 Год назад

Lee. Another great video. These look extremely promising. I ordered 3 at this price with more to come if I like them.😮😅

@OneTwo-wt8qv 11 месяцев назад

Rec'd mine and the usual SpeedyBee attention to detail , packaging is neat and clean ... going in a dusty new in the box Hobby King Go Discovery w/ INAV .. finally learned how not to crash .. lol....cheers !!

@pascalfust1035 Год назад

Awesome news. I am not pro in soldering and the modular approach is really promising

@ADF_Cable Год назад

Thanks! Ordered!

@pascalfust1035 Год назад

Just ordered two of them. Ready for my next projects...😊

@funkynerd_com Год назад

Currently gathering parts to build up a Reptile Dragon II and this is the FC i'm dropping into it. Great to hear I may have made the right choice! I love the Speedybee stuff and run their FCs in my race kwads.

@alexb9666 11 месяцев назад

I’m building mine right now.

@FATSNAIL-FPV Год назад

Ordered this before price goes up once it gets noticed more. I wonder if this would fit my Flying fish and if the wiring with plugs for the Walksnail V2 vtx are included (could always solder to the vtx anyway). Time to start looking how to get the vtx and cam on the fuselage and not on top of the wing (in case of a crash, still a beginner ate fixed wings lol) These are great time for being in the hobby! It looks like we're going a leap forward again all around the hardware and firmware side of things! I hope they keep the price competitive so we keep getting these innovative products! Great and informative video as always Lee! Thanks you! Happy holidays!

@billkendall7464 Год назад

Thanks, order placed!

@anshusky5184 Год назад

Nice work Keep it up

@swissfreek Год назад

The need to use GH connectors isn’t a huge deal to me, but depending on the device might add extra work to make the wiring compatible. I personally find soldering the pins kind of relaxing and I have a nice iron, and it is easier to customize the wiring. But it’s not a deal-breaker. Other than that, the only thing that’s missing that I’d have liked to see is the ability to turn the VTX power on and off. That said, at half to 1/3 the cost of other wing boards, and given everything that it includes (if you’ve not used the SpeedyBee app, my word, it’ll change your life), this looks like a tough one to beat.

@ReggieRailSystems Год назад

I went ahead and ordered one this morning from Speedybee. Have no wing at moment but I’ll grab something.

@jblob5764 11 месяцев назад

Have never assembled a fixed wing but with the price getting more reasonable i am very interested in giving it a try in the near future. Have been doing some research on what i would need

@WinstonSmith1984 Год назад

It's cheap but too large and heavy for the models i typically fly. I like the small connectors for UARTs. That makes sense and i hope other board manufacturers copy that idea because it only makes sense to use servo pin connectors for servos or similar high current devices that come with dupont connectors.

@Paiadakine 5 дней назад

Thanks for this Review. Your video series on Pixhawk Multicopter Drone years back helped me build, torubleshoot and tune a Quad and a Hexacopter project. I would like to use the flight controller to rescue an RC Glider when it get lost out of sight, I would then flip a switch to return to the LZ and hopefully I can reacquire it to land.

@rickhubka Год назад

Thanks so much for this video. Ordered 1. My first FC... Yikes!!!

@roddysallie8098 Год назад

Just ordered one 👍

@colddash5598 Год назад

Saw a post yesterday and ordered one…I’ve never built a plane using a FC. The plug n play convinced me. I’m excited.

@Jay-zc7iq Год назад

Hi could I ask where you ordered from as popped on to there site saying unavailable

@colddash5598 Год назад

@@Jay-zc7iq I did order from the product site link the post’s author had used for the picture etc..that was midday yesterday, possibly they have temporarily sold out already. Edit: so I went back and see it says preorder on the site…I didn’t notice that yesterday so hopefully I got in on time but mine might actually also be a preorder, I’m checking my confirmation also to see if it says anything.

@Jay-zc7iq Год назад

@@colddash5598 ahh cheers sir yea I’ll just have to keep an eye on it I guess thanks buddy appreciated

@mmmasterscross7915 Год назад

Love it

@maxun1 Год назад

Love it.

@PcandTech Год назад

This is so cool for rc planes

@SpringHaIo Год назад

I'm surprised they didn't try to add a built-in ELRS receiver, considering they already put their wireless ESP32 chip on-board. Shame this just got announced yesterday/today because I just ordered a dolphin RTH kit from atomrc thanks to your recommendations.

@dronepilot260rc Год назад

This looks very similar to the Sparrow 3 OSD 🎉. This is definitely a 1-up over the sparrow for the same price

@zappex92 Год назад

Best !

@PrzemyslawGalazka Год назад

Cheers :)

@LalapopApple Год назад

This is why i Love Speedybee. At First their f405v3 Stack (i dont know why you should buy Something else) And now an Wing FC.... They Killing the Market prices 👍

@MrApache64AH Год назад

ok just received my Speedybee so just waiting for a video series on how to put it into a wing, over to you Lee ;-) !

@Painless360 Год назад

Pretty much the same as any other of the INAV setups on the channel... Stay tuned!

@Northbourne12 Год назад

I’m really hoping it will be available in the uk at the reasonable price like it is in the USA unfortunately it’s not always the case.

@OpenHD-Official Год назад

Just bought one yesterday

@Pilotltd Год назад

Got one ordered a few hours before your vid Lee, however, will be used in a rover not a wing. 😉

@raven_fpv 10 месяцев назад

Great FC!! BUT it is not available in the USA yet. Any idea when it will be here?

@skelethornbro Год назад

I've been saving money to buy a matek f405 but now with this speedy bee fc I think I have enough. One thing that is missing I think is PINI0 i.e ability to switch my dji a.u off and on remotely while waiting for gps lock.

@johanfredriksvendsen8482 Год назад

Seems like a very good deal. Same price as the Matek F411. Only hesitation I might have is how I feel like I see a fair amount of people on reddit disapponted with the QC/durability of SpeedyBee's quad FC/ESCs burning out quickly.

@Painless360 Год назад

I've not had that here. Time will tell how well it performs and holds up...

@StoneVictor Год назад

BTW, any of you guys came up with unusual EKF3 info then went to a crash recently? Me and fellow pilots had a lot of crashes these months, many of them report that OSD showed something like EKF3 Active, DCM Active, or other EKF info they don't understand(Chinese user mainly). Most of us use boards with Matek F405 TE firmware, version 4.3 series. I don't know if that's really connected or only we are not doing things right.

@birdmantelly007 9 месяцев назад

I went back to my dealer when the going got tough. They went to China ! The Sun is brighter and the skies are bluer ! My speedy Bees are nearly ready to Buzz !

@robertdroner Год назад

Albeit a F4 - it seems to have enough UARTs and well supported.

@clmb2225 Год назад

Thanks for the great video! Can you tell me if the board also works on a receiver from Spectrum. I have a DX6i and would love to use it.

@Painless360 Год назад

Only SBUS and CRSF protocols shown in the manual so not sure as I don't use Spektrum here.. Best of luck

@gflorey1975 11 месяцев назад

Hi Lee, thanks for your great videos - Can you get an elrs reciever with an SBUS out to go into this FC?

@Painless360 11 месяцев назад

Sbus support is coming soon to ExpressLRS when V3.3 is released... Happy flying

@timay3459 9 месяцев назад

Just ordered. Hoping it supports V-Tail. Have the ZOHD Talon GT Rebel I'm hoping to install this on for LR.

@Painless360 9 месяцев назад

It does. Best of luck with the build

@Lawzy 10 месяцев назад

Thanks for the review Lee. I’ve now got one on the way. As you said, it would have been good if there was a port setup guide. I’m relatively new to these wing FC. What is easiest way to get started with the ports?

@Painless360 10 месяцев назад

Lots more info in the manual now... store-fhxxhuiq8q.mybigcommerce.com/product_images/img_SpeedyBee_F405_WING_APP/SpeedyBee_F405_WING_APP_Manual_V1.1-EN.pdf

@Lawzy 10 месяцев назад

@@Painless360 thanks Lee, I missed 5he obvious.

@jamesemery1 Год назад

nice bit of kit as soldering is hard to do well

@zappex92 Год назад

@DP69264 Год назад

Great review. The only thing I forsee being a pain in the backside is if you wanted to mount your rx or anything out farther from the fc. Having to cut and splice is never fun. Unless maybe there's a better way to do it?

@upperechelon3456 Год назад

If using SBUS you can easily attach an extension.

@ssgllc7007 Год назад

On 3d printed airframe number 5. First 3 nosedived at full throttle right after takeoff, turns out elevons were reversed. Airframe number 4 went 40 ish feet Before I got confused as to whether moving my pitch stick up brings the nose up or not. I plan on trying inav with this fc. Hopefully it will allow me to have a “safe mode” for takeoff and landing. Could you make a video for ignoramuses such as myself explaining which way your control surfaces need to move and witch way you set up your pitch stitch in relation to the nose. Sorry if this is beneath you, I am sure there’s other videos out there explaining it, but your vids are not only informative (like so many others) but also entertaining. Do you have any videos explaining how to install an FC in an already completed fixed wing. Not so much explaining the soldering of pins and what not but more so getting into the nitty gritty of setting up inav from scratch, troubleshooting, big do and don’ts ect.. Last question I promise… I have the ailerons both going into the same channel on my receiver. when I put a fc in it, does the fc need to be able to control them independently? I.e. be plugged into different outputs on the fc?

@Painless360 Год назад

Check out my iNAV for Beginners series and this video covers the control movement ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rJL9USy_YuI.html Best of luck

@sewerfly619 Год назад

I bought this from your link like 4 hours after you did the video now I'm wondering where i can buy longer extension wires or the connectors and crimping tool, anyone know?? Thanks again

@johnwilliams4519 2 месяца назад

Hi Lee, any chance you could go through the rotor flight setup for this fc😊

@Painless360 2 месяца назад

I wanted to have a Rotorflight series for the release of v2.0, but sadly there wasn't the support. I am planning some related content, so stay tuned!

@bomberaustychunksbruv4119 Год назад

If they can do a vTol FC for my T1 I be interested.

@neomayad 11 месяцев назад

Great vids. Question: I do not have much space in my plane and the current spektrum bnf receiver is right smack in the middle of what little space I do have. I plan to remove the receiver and put this stack there. Any suggestions on where I should move the receiver to? I'll have enough room on either side of this stack to fit the skinny receiver flipped on its side. but itll be snug asainst the wall and it won't be in the center of the plane anymore. Will the As3x in my plane be overridden by the FC stability system? Will I have to find a way to disable it? And if so, does orientation matter at that point? I'd put it on the wall to give the fc some breathing room.

@Painless360 11 месяцев назад

I wouldn't install a separate stabiliser along with a flight controller. I think that would just make everything far too confusing and get you into a lot of trouble. Best of luck

@Arm_Chair_Engineers 9 месяцев назад

This is interesting. But what can you program into it. Say I want to control a set of levcons and I need them to perform different moves depending on speed or angle of attack. Is this type of flight controller capable of doing that?

@Painless360 9 месяцев назад

Typically pilots would install INAV or Betaflight into t. Check out what INAV and Ardupilot can provide you with in a fixed wing... Best of luck

@mike_oe Год назад

Thank you for pointing us the this $40 FC, very useful in times of high prices on components. Unfortunately the webpage currently states "Due to the high demand for this product, our current inventory is unable to fulfill all orders. Your ordered items are expected to be shipped in 8-15 days. Thank you for your patience and understanding."

@Painless360 Год назад

Yep, this will be a popular one. Please make sure you are subscribed and have the bell notification icon selected so you get to see videos like this as soon as they come out. Best of luck!

@davidandre8029 Год назад

Is there any tutorial for building an uav with this kind of board ? What other components should I add to this to make it fly ? And the programmation, it is very complicated for a noob like me ? Thanks for any tips !

@Painless360 Год назад

Yep. Lots of build series on the channel aimed at beginners... Best of luck

@GhostRyderFPV Год назад

I bought one the day I saw this, and it will be at my door shortly. There's a cheap-as-chips Airloader in it's future, and we're gonna put the in-built LED controller to the test for my Night-Flying catfish. For what I've been spending on Matek 405's I can have two of these; Great find Lee!!! Question for the group: Analog Starlight Cameras, I've researched as much as I can, and it looks like a Foxeer Cat 3 is the ticket, but I'm open to any experienced opinions? I'd like to have day and night capability, without swapping IR/Non-IR lenses. Thoughts?

@GhostRyderFPV Год назад

Back with an update on this board: other than reminding me of the ground pad heat wicking on the original BF board, it's wonderful.

@liemph Год назад

Thank you for sharing! I just bought one today, but could you let me know whether I can use my FlySky FS-I6 TX and FS-IA6B RX to connect to the FC? If not, what would you suggest? Thank you.

@Painless360 Год назад

If the reciever you have talks SBUS then yes... Happy flying

@liemph Год назад

@@Painless360 Thanks. I am a newbie and not so sure since on the cover of FS-IA6B RX, it is written i-Bus. I want to make sure if I need to purchase a suitable RX for this FC.

@jackholding9010 Год назад

Would this work in a boat with ardurover?

@georgthalhofer280 6 месяцев назад

Hello, you have made a great video. I bought the FC as a result. After 2 hours of operation and setup, there was a short circuit on the circuit board and the FC caught fire. I contacted Speedybee directly because I had also bought the FC there. They then decided that it was not a fault with the circuit board and that they could give me a 30% discount if I bought it again. I think something like that should also be mentioned in a video. A regular customer warranty is simply rejected here. Greetings Georg😮😫

@Painless360 6 месяцев назад

Good to hear. Did a short circuit check on the XT60 not show the problem before you plugged in a battery?

@georgthalhofer280 6 месяцев назад

@@Painless360 what IS a short- circuit Test of the xt 60? The FC also worked for approx 2 hours ON battery power before IT broke down

@Painless360 6 месяцев назад

See my builds that show how to check the powerconnection... odd it failed after an amount of time... Happy flying!

@jackholding9010 Год назад

Would this board be OK to put ardurover on to use in a twin motor boat as an autopilot

@Painless360 Год назад

Ardupilot is listed on the website so looks like it... www.speedybee.com/speedybee-f405-wing-app-fixed-wing-flight-controller/

@olacarpe6676 Год назад

Hello, thank you for your great video. I have a question can I use this FC speedybee with ardupilot boat?

@Painless360 Год назад

Yeah, if it is supported on Ardupilot. See my video on how to check...

@olacarpe6676 Год назад

Merci 😉

@bushcraftmonkey7643 7 месяцев назад

How do you power the board if you don't solder the battery wires? And how do you connect your receiver and servos? This thing is not fully plug & play... the rest looks good, but not everybody can solder...

@Painless360 7 месяцев назад

You need to supply battery power so the on board BECs can deliver the voltages for the pieces... Happy flying!

@michaeln.8311 Год назад

Hello Lee, How can you get the black box data from the SD without having to remove it?

@Painless360 Год назад

I am not sure. Next time I have this out, I'll try!

@varios1137 Год назад

Good morning, what Gps module, and what speed sensor are compatible with this controller, what other sensors could be installed? Thank you!

@Painless360 Год назад

The same as any other flight controller that runs something INAV. Lots if UARTS on here for sensors if you want to add them. Matek are the ones I use here..

@varios1137 Год назад

@@Painless360 thanks good information!

@mangjanachannel Год назад

Can i use wifi onboard for telemetry?? Tgank you

@phillipbrandt7780 10 месяцев назад

Is it possible to install two fpv analog cameras and switch between the two?

@Painless360 10 месяцев назад

Yes, with analogue FPV. Things like camera switchers and second camera connections on some flight controllers make it easy to setup. Best of luck

@jnick6 Год назад

newbie question, when you say end of life does that mean production or they're no longer programmable/rendered useless? I have purchased both of these FC. a speedy bee F405 and a secondhand Matek F405 FC to put in some fixed wing's I have recently acquired. what do you think about these flight controllers for a beginner?

@Painless360 Год назад

A lot of the recent changes with flight controllers have been due to chip shortages. Flight control software like INAV, Betaflight and Ardupilot usually carry on support for 'retired' flight controller hardware for years and years so don't worry.. Happy flying!

@jnick6 Год назад

@@Painless360 phew! thanks lee. it means a lot. really excited to get into this part of the hobby, especially with these FC's which have had made a lot of noise in the fixed wing area. happy flying too you too!

@Northbourne12 Год назад

Hi Lee mads tek said he is going to use this for a ranger t1 vtol conversation, could this fc do that

@Painless360 Год назад

I've seen other F405 wing boards used for that so yes... Happy flying

@hughoneill9861 Год назад

Will this work with my Elmic Commander escapement and MacGregor Terrytone receiver?

@Painless360 Год назад

I've not seen one of those with a flight controller in it yet.. Happy flying!

@tonyyeung821 Год назад

Is it able to provide 9V on the VTX output when using a 2S battery?

@Painless360 Год назад

I'll test it when I build it. I'm guessing not but I'll see. Stay tuned!

@BillHally Год назад

Ordered mine today and want to use Arduplane as I always do, is the Matek F405 Wing firmware compatible with this device or is there a dedicated Arduplane firmware for it and if so where is it downloadable from as I can't see it on the Arduplane download page? TIA Bill

@Painless360 Год назад

I'm looking at that at the moment, stay tuned!

@BillHally Год назад

@@Painless360 Great thanks I have searched all over for it or any info to no a avail right now. Cheers Bill

@BillHally Год назад

See you removed my post probably because of the link but is there any way you can take a squint at my video about the motor spinning up and tell me if this is normal in your expierience? Spins up just fine from the Output tab.

@aerialbugsmasher Год назад

Would the walksnail VTX be a plug and play affair? Or would the wires need to be arranged differently?

@Painless360 Год назад

It'll probably use the same port as the DJI system and use the GND, power and TX and RX pins..

@aerialbugsmasher Год назад

@@Painless360 i figured but then sometimes you also have to move around the order of the wires and what not. At any rate thanks for another great video and hope to see one of you running it with walksnail soon

@AndrzejRoszkowski Год назад

wires and connectors - do they provide what kind of connector is used? it is nightmare to match with other devices, in my case, it always end with soldering...

@techstuff6829 Год назад

JST-GH I believe.

@AndrzejRoszkowski Год назад

that's the problem - guess - why not to make a note about??

@ledgerdc 6 месяцев назад

Do you know if this fc is compatible with spectrum Dsmx receivers?

@Painless360 6 месяцев назад

You need a reciever that'll talk sbus or CRSF... Happy flying

@neilloach1876 10 месяцев назад

Hi, just wondering if the speedy bee supports OLED screen ?

@Painless360 10 месяцев назад

Should do. I don't use them anymore as they can cause issues. I use an OSD or the LUA script to monitor the FC. Happy flying

@fredbarnes196 2 месяца назад

As a new person trying to get their head around all of this, what is the wireless for? For me it would to be able to talk to QGroundControl on your computer. But the manual says the WIF range is 3-10 meters. If that is true, how do you use QGroundControl, and what good is the wifi?

@Painless360 2 месяца назад

Speedybee make an APP that can run on your phone and connect to the WiFi/BT and allow you to setup and change the config at the field. All without a computer! :D

@fredbarnes196 2 месяца назад

@@Painless360 I have to be able to change waypoints on the fly, for multiple devices (boats) , hence QGroundControl. Maybe I need to look at the Radiolink options. Thanks for your videos!

@Painless360 2 месяца назад

Or you can use something like the 'AIRPORT mode' on ExpressLRS to send the MAVLink telemetry back... Best of luck!

@redd6914 4 месяца назад

I just cant get the rudder servo to work. Is there a discord channel or any group could help please? thank you

@Painless360 4 месяца назад

What troubleshooting have you already done?

@Tammy-un3ql Год назад

👍👍👌👌

@johnmoser1162 Год назад

Any hands on tests coming ?

@Painless360 Год назад

Yeo, make sure you are subscribed and have the bell notification icon selected... Happy flying

@johnmoser1162 Год назад

@@Painless360 Great ! ... can only do $1. Still waiting for the EM jackpot ... 🙂

@nonya1940 7 месяцев назад

What did you put it in i cant seem to find the follow ups?

@Painless360 7 месяцев назад

I didn't make any videos of it. Same setup as my many other inav builds on the channel... Happy flying

@neopositivity 11 месяцев назад

does this require a capacitor to run in my Zohd rebel? if so what uF?

@Painless360 11 месяцев назад

It should be fine. Best luck

@lungomaburfpv1425 Год назад

Hello, can be install ESC Bidirectional (forward and reverse motor brushless)?

@Painless360 Год назад

There are brushless units that can do that. Some are designed for wheeled vehicles. Some for planes that need a reverse (like float planes)... Happy flying

@lungomaburfpv1425 Год назад

@@Painless360 What about if INAV 6.0.0 (my FC is AocodarcV2)? That is can't arming because Throttle at center (1500us) ...I am headed for setting it.

@Painless360 Год назад

I've never used one with INAV. If it is supported it'll be in the docs. Sorry I can't be more help

@birdmantelly007 9 месяцев назад

I soldered my first Speedy Bee Wing and thought that was really easy. Imagine my disappointment when it failed the inav receiver screen test on UART 2.(No response on any channel.) I spent a week asking questions and made no progress. I decided that I must have scrambled the flashing with some error in the ports page. Tested that theory by setting up a second unit with precisely the same result. Have asked all the usual qestions. Tested SBus polarity. Tested the Sbus link with a standard airframe (No F/C) AOK. Any thoughts ??? Radio is passing all telemetry and range tests. Weird !!! Sudden thought !!! What does the boot button do on the USB connector ???

@Painless360 9 месяцев назад

Please check out my INAV for Beginners series. I show all the steps. SBUS should be super easy to get working if the right port is used and the right setup is in INAV... Best of luck.

@craigreynolds4449 Год назад

could you check if it supports Fport being an F4 please Lee🙏

@techstuff6829 Год назад

If you use a new R-XSR receiver it has an uninverted SPort/FPort pad on it.

@rasmus80g Год назад

Good first try. But why soft mount middleboard and put connectors inbetween?!? All vibration stress will be on connectors. Iflight and dys did this back in the days and stopped becaus of issues... quads are more vibration prone yes but still. Should not be rubbergromets but hard mounting in-between boards or wire harness in-between them. (There is a reason there is wires and not connecors inbetween esc and fc on a quad)

@Painless360 Год назад

Until I've flown it, I can't comment. Matek FCs are hard bolted and I don't have issues. Not sure what the yellow rubber pieces are doing here..

@rasmus80g Год назад

@@Painless360 exactly. I have a lot of matek boards myself and they are solid... Im guessing it will take a lot of time in a plane to cause issues but still a bad design having a connector taking all the stress (Still considering this fc but will then 3d print something hard to replace that rubber... hopping speedybe sees this and changes the standoffs)

@anupmokashi3114 9 месяцев назад

Hello sir How to use/convert speedybee f405 v3 drone flight controller to wing

@Painless360 9 месяцев назад

Check out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XWv7aG7z22o.html

@ElseysEmpireRacing Год назад

Tried to order but it wants my Paypal money before giving a shipping cost. I'm in Canada so I don't want a big surprise. They are no doubt in China so is it free shipping everywhere?

@ElseysEmpireRacing Год назад

I went ahead and ordered, there is a free shipping option, takes over a month but that's ok.

@skelethornbro Год назад

Yeah the default option is free shipping. Further reduce the unnecessary cost imo.