Ni-Cd to Lithium Battery and Charger Conversion | NiCd / Ni-MH Battery Repair

Подписаться 802 тыс.

Просмотров 964 тыс.

50% 1

Cordless Power Tool Battery and Charger Conversion - Ni-Cd / Ni-MH to Lithium-Ion
Lithium Battery + BMS + Nicd/Nimh Charger, It's a cheap and efficient conversion to upgrade your old beloved cordless power tool.
Main used parts:
- 3S 40A BMS module: shorturl.at/drsG1
- Pure nickel strip: shorturl.at/dGW23
Music by Epidemic Sound (www.epidemicsound.com)
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

Хобби

Опубликовано:

23 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 188

@tcap7917 Год назад

Lithium battery charger $6, 18650 cells $18, BMS module $6 ...Your talent...Priceless.

@UGPepe 4 месяца назад

spot welder, 3D printer

@dendys04 2 месяца назад

@@UGPepe u dont need 3d printer u can just glue the cells and spotwelder board costs like 20 or u can just solder the cells ik its not safe tho

@blueback21 Месяц назад

Soldering the cells isn’t safe?

@viswanathanramakrishnan7613 Год назад

This is what I was expecting from conversion of the old ni-cd batteries to lithium-ion battery pack and the chargers requirements and how to fabricate such a charger. Thanks a lot.

@wimpraet5161 Год назад

Wow, I have never seen such a super quality film here and it seems to be 4 K quality and the revision of the old worn batteries is TOP and even the manufacturer could not do it better. I would certainly entrust my device to him for the repair and you will not find many such perfectionist repairers.

@andrew_koala2974 3 месяца назад

I had three cordless drills - two of which were at least 13 years old - and had been sidelined fro almost a decade It was only a year or so ago that I had to repair a LiOn Battery in a MAKITA cordless drill -- It was then decided to convert and re-pack the three Power tools that were set aside - and convert them to LiOn It certainly was better than dumping them. I see many for sale at local Trash & Treasure markets - being sold for the equivalent of USD $3 - unfortunately not many of then have the charger to go with it -- so selling them after a modification has been completed - makes it difficult to SELL sans charger

@divyajnana Год назад

Nice touch updating the charger too. A great updated drill at a great price, nice job.

@MotogiantTL Год назад

Awesome instructional video! Concise, simple, and no drawn out "look how smart I am" speeches! Bravo!! I am 100% going to do this!!

@howardosborne8647 4 месяца назад

Absolutely superb battery conversion job👌 I have gone a different way to convert several of my old 18 volt Dewalt NI-CAD/NI-MH power tools to Lithium Ion. I use the original NI-CAD battery top cover and battery connector and attach a slimline Lithium Ion adapter shoe directly to the original NI-CAD top plate. This assembly of old top plate and Lithium adapter shoe is then fixed into the power tool battery port with 4 small self tapping screws and then a standard Dewalt 18 volt Lithium Ion battery can be fitted to all the modified power tools. So far I have successfully converted an 18 volt cordless vacuum cleaner,a 165mm trim saw, a compact angle drive drill and a SDS masonry drill....all work very good on the Lithium Ion packs.

@battmanbattman5308 2 месяца назад

You can actually buy the complete adapter (very cheap) which is very good quality and also has USB out. Search Battery Adapter DM18D With USB, Compatible With Dewalt 18V Tools

@gjt2209 2 года назад

Very nice, well thought out conversion done to a high standard. Thanks for sharing your ideas.

@ryanmacewen511 Год назад

This has to be one of coolest battery conversion videos ever! Super clean. Nice job! Liked and subscribed!

@somebeinganonymous Год назад

Very neat and tidy video. Great content as well; especially enjoyed the effort you went to with upgrading the original charger.

@ksfurlover2 Год назад

Thank you for the instructions on the conversion process. Hardest part was following the battery wiring - parallel / series. But, I have my Ryobi 12v drill converted :)

@kevvyg04 6 месяцев назад

Probably the best conversion O have ever seen with great detail !!

@Ivan-Archer 4 месяца назад

Top class video with very clear instructions. My tip for sourcing Lithium ion cells is to check out your recycling centre where these 18560 cells can be found in every tool battery also in hoovers and anything else using lithium batteries such as hoovers etc. An almost limitless supply of free good batteries.

@welbyroberto6581 2 месяца назад

During Covid-19 I found couple half used cans of interior white paint and I decided to paint the garage. I needed a 9v battery to test out something and found 2 good ones....all in our localrecyclecenter.

@dave_bob Год назад

Have you posted the STL for the battery holder? Nice job on the conversion, it's good to put older tools back to use.

@zenzen9131 2 года назад

Best Lithium conversion project ever !

@hippie-io7225 2 года назад

Beautiful conversion!

@xtndz3320 5 месяцев назад

Excelente, tenía algunas dudas en renovar mi taladro 18v, seguí las instrucciones ocupe bms 5s y quedó perfecto 👌

@juancarlossanchez118 Год назад

Impresionante, lo ha hecho perfecto y con gran facilidad.

@viorsa8200 2 года назад

Excelente tutorial , sus conocimientos de electrónica son muy grandes , muy buena transformación , gracias por compartir sus conocimientos y experiencias , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝 💨

@MCsCreations 2 года назад

Brilliant work, dude! Nicely done!!! 😃 Stay safe there with your family! 🖖😊

@eduardomr8110 8 месяцев назад

Increíble cambio ,justo eso le pasa a mi atornilladora,felicitaciones

@megeezer69 Год назад

Very well done. Extremely informative & well paced

@Fierofreak01 2 года назад

Very cool way to recycle a power tool that still had some life left in it! And it was way more cost efficient to make those modifications then buying a new drill set! Where did you get the batteries from, that price seems really good to me.

@andymuzzo8568 2 года назад

Awesome importation. Thank. I’ll do this for my stack of 18v & 14.4v dewalt batteries.

@EmmAyeVee Год назад

As much as i like fixing items instead of throwing them away and spending more money on replacements. Because would doesnt like to save some money. But in this case, i ended up just buying two battery packs for my cordless drill for thirty bucks. None the less, great video.

@lwh7301 7 месяцев назад

I purchased a brand new Black and Decker 20v lithium impact drill/driver for $49.95. I know it's difficult tossing perfectly good tools with bad batteries, but still. I have other drills, but that's the only one I use now. It's powerful and changing bits is super easy. The money and time you spend to get the batteries and other parts and then assemble, it's cheaper to get something new and modern.

@thisisyourcaptainspeaking2259 2 месяца назад

Very nice! I have a similar Dewalt drill/charger configured for NiCAD cells.

@Stisse12 2 года назад

Nice and clean Recycle!

@murraystrand 2 года назад

Wow. Nice work! Very well done.

@martinmuldoon603 2 года назад

That was purely a fascinating upgrade to lithium Ion. Your the best.

@frenchcreekvalley Год назад

Good ideas and a great job! Very informative.

@janbuttig4819 7 месяцев назад

Those stickers at the end killed me! Yes. I will never try to fix anything again! Thank you?

@outtadebox1877 4 месяца назад

Nice job once again. If I have time I'm gonna see if I can do it. Providing I have all the parts still.thanks

@osmancanbaz7312 Год назад

Good job İs it possible to see your spot welding(how did you do that)

@googlefuuplayad9055 2 года назад

Very cool 😎👍👍 How did you make the sticky labels? Did you order them, how?

@georgivoyvodov1123 Год назад

I upgraded my old cordless drill with 6S Li-po Graphene battery and brushless motor . the 18V Ni-Cd battery was dead long time ago and the brushed motor was gone. Now I have brand new top notch drill with invested 100 bucks and few hours work.

@mikaeljonsson4686 Год назад

Thats one awesome project! Thank you for sharing, great job and good explanation! You got a new subscriber! 😉

@Waaasil Год назад

Thank you very much for this educative video.. Well Done

@ronsen9974 Год назад

Very helpful video. I like your battery spot welder. Were can i get one like that from. Regards

@fishheadH2o 7 месяцев назад

Cool video !!!! Can you do this with the 18v DeWalt ,and provide links to all the parts?

@joseluisprieto3438 Год назад

Very good job, the cells are high discharge ? or are they recycled from Laptop?. I did a similar job (But not as good) for a Dewalt 18V Drill and only 5 cells (21V) fit in the case, using a 5S 100A BMS from the silver ones. And I did exactly something similar with the charger using a 24V Printer transformer, but it must have a protection circuit because it deactivates 0V when connecting the battery, I have to do it several times. Greetings from Venezuela

@mariaassuntadinucci-io8ze Год назад

congratulations for the work done, could you recommend me a link to get some batteries to do the same change? Thank you

@med5241 Год назад

Very nice tuto, great thanks.

@omarbaalwi3544 Год назад

excellent well done 👏🏾

@Igor-ge1py 2 года назад

Super talented!

@boblevey 8 месяцев назад

Excellent!!! Thank you

@R3cce 8 месяцев назад

Actually, he replaced the old nimh (nickel metal hydride) battery. Not nicad

@MechmanGetrieb 7 месяцев назад

Really god !! Thanks for sharing.

@jamesocker5235 Год назад

Nicely done

@gregorvetter6588 Год назад

Real cool. Great respect

@Bianchi77 Год назад

Creative video, thanks for sharing :)

@bobcat2378 4 месяца назад

Awesome job!

@kadirince 2 месяца назад

Elinize sağlık

@titroxmexico Год назад

Real Men stufs... Thanks Bro.

@MrManjinder123456789 5 месяцев назад

Looking like witching neat and clean electronics amazing

@tf1389 Год назад

great job thank you

@jured7383 Год назад

Great video, nice tips, would do it too for my oldy but goody DeWalt DC981 ... BUT ... am too scared of fire/explosion of Li-Ion batt's. If something burns in ''3S 40A BMS'' overcharge protection might be disabled and than BIG BANG. While if the fire breaks out in the Li-Ion there is literally nothing you can do to put it out. I do a lot of handy work, sometimes charging in the house, in the shed also in the room or adjacent room, where I work, so ...... rather no Li-Ion. Will go with 1,2 V LiitoKala Sub C, 3500 mAh, Ni-Mh and sleep tight :).

@screwsnutsandbolts Год назад

Excellent videos ! 👍

@davesherry5384 Год назад

Great video! Very, very helpful. I wonder if you know how I can charge Li-On 18/20V power tool from a vehicle (12V supply without using an inverter? Can I modify a charger to be powered from 12V rather than 240Volt? PS Loved your mini bar build - I am going to do one of these for our camping trips and fool the Mrs.

@kennmossman8701 Год назад

how I can charge Li-On 18/20V power tool from a vehicle (12V supply without using an inverter? 1) use a BUCK converter to 'up' the voltage 2) use a battery charger CIRCUIT to charge the battery7

@marcosramirez385 Год назад

Long ago I also took apart an old battery but I just replaced the cells with the same chemistry and spot welded together. If I knew I could upgrade to lithium I would would have done so.

@bienvenidoyoungjr.2433 Год назад

Awesome , good work,

@rc-huina8221 Год назад

Good job 👍🤠

@pmacgowan Год назад

Nice conversion :-)

@HowToRestoration 11 месяцев назад

Well done 👍

@perhagglund5595 6 месяцев назад

I am about to do this exact repair on my dewalt, exactly like the one in the video. Do you mind sharing the exact parts and numbers that you used?

@brooklyn_productions 3 месяца назад

Nice video a diagram would of been cool, since the important, most intresting part was not shown totally.. the wiring of the batt wasnt shown rite, wish u would of spin o turn all around to see all the detail of the soldering u say parallel, but i was only able to view how 4 of 6 batt was spot weld. 2 batt i wasnt sure of🤔. where they bridge to the rest of the batt or soldered directly to the board??

@PhG1961 2 года назад

Awesome !

@Kevinhaghighat 9 месяцев назад

This is great and exactly what I've been looking for. By chance can you post or send me the STL files for the printed battery holder parts?

@jenntek.101 10 месяцев назад

Very nice. I did the same thing with battery pack, and charger for my old Black n Decker Drill and charger. (People make fun of the brand; but, Hey! it works!) I used batteries from a Dewalt 20v. One cell was bad out of the pack. I also used a cell to replace the battery in my NON-Repairable electronic cigarette. Never toss Lithium Ion Battery packs; There is a use for them! Make something!

@nicolasparadis1407 6 месяцев назад

Excellent!

@mjc0961 Год назад

I'm not sure what's a more obvious giveaway of the age: that it's a Ni-MH battery, or that it's got screws so you can easily open it.

@madjdoubakermi6357 6 месяцев назад

شكرا لكم اخي

@craigvickery9283 Год назад

You make it look all to easy

@elvisdepaula8312 2 года назад

Muito bom

@robertofernandezvazquez8755 2 года назад

Awesome!!

@leovolin7525 7 месяцев назад

What's the voltage on these batteries? I thought it is 3.7. These are like 2.1V?

@drchan5893 10 месяцев назад

great video sir, I have the same drill with the battery no holding charge , So i will do the same Conversion. I think the battery Circute board will over-heat if using continuous drilling.

@CopycatStudiosLA 8 месяцев назад

How long did it take for you to learn all these stuff for you to just confidently REMOVE everything?

@mehranalipour320 Год назад

Very good

@bayloruniversity5812 4 месяца назад

Do you have a video converting older 18v Ryobi Ni-Cd batteries? That would be so awesome if you do, please make one if you can, thanks and great video!

@litsteve1968 3 месяца назад

Kolejny dobry pomysł aby usprawnić elektronarzędzie któremu padło zasilanie

@vladozuzula3755 5 месяцев назад

Hi. Do you have a sketch of the holder for the batteries, please? Well thank you

@marcosarb80 Год назад

Una BMS 3S de 40A no es demasiada corriente para la descarga? No seria mas recomendable una de BMS 3s 25A? Gracias y gran video Compartirías el stl del modelo de las pilas con la inserción de la bms ? 😊

@stefanvarlan9256 Год назад

Tradu în română

@marcosarb80 Год назад

@@stefanvarlan9256 Nu este un 40A BMS 3S prea mult curent pentru descărcare? Nu ar fi mai recomandabil un BMS 3s 25A? Mulțumiri și mare video Vrei să împărtășești stl-ul modelului de baterie cu inserția bms ? 😊

@countryside8122 Год назад

I added a female adapter to my battery so you could use the wall wart to charge the battery. Much easier. Great video in converting!

@igorfilipovic6188 8 месяцев назад

do you have stl fil for holder

@steveclark3379 Год назад

Very Nice 👍

@EL90291 Год назад

Could you share the STL files for the holder for the battery . Thank you

@marklangley1122 4 месяца назад

Hi, really interesting video, your drill/battery/charger were at 12.5v, I have a Bosch 14.4 volt drill and I have found on eBay BMS module 4S rated at 16.8v, assuming 3S is not able to cope with 14.4 volt, am I correct to use the 4S ?

@geried. Год назад

Pervect ..... Top !

@fishsalt Год назад

Do you provide this as a service? For other brands

@josephbohme7917 8 месяцев назад

So intelligent & talented sir what is the price of entry to send my old packs and charger to you and your upgrade fro them to the @15v level?? seems so easy but we all learn by doing but you have backend stuff we do not. Thanks

@Iamsuccesspro 2 года назад

Awesome

@piotrnapieraa5422 Год назад

Super 👍👍👍

@blueback21 Год назад

Brilliant, I’d like to try that, but it’s kind of intimidating if you’re not a pro like you

@user-xq7to9rd4h 11 месяцев назад

Can you give a link to the model for printing the 18650 battery holder? pls

@oldboyperi6166 Месяц назад

After you had bms on battery pack what will happened if you charge with original charger ?

@carlosdantenicolasdelafuen1293 Год назад

Gracias 👋👋👋👍

@tedlofland3446 2 месяца назад

Most NiCad battery packs have a thermal fuse that goes bad. If you compare positive to negative on a good battery and a bad battery one of the terminals on the battery will not show voltage.

@alexandres8846 Год назад

better to rebuild with nimh batteries which are also high capacity and still use the original fast charger.

@Mikeesocal69 Год назад

Do NImh last longer than lithium? The nimh in this video lasted 11 years.

@MrStyle-sr1yv Год назад

CAN I USE 5S BATTERY PACK ?? CAN THE 12V DRILL HANDLE 20V ?? FOR ME 5S BMS WITH CHARGER IS EASIER

@nathaliegoodman8374 4 месяца назад

How did or what you used to spot weld the batteries?

@leaaron9901 2 года назад

Nice idea, but u shouldn't remove all part in old nimh changer and use this new lion changer. It changer 5ah battery really really slow (about 0.8-1A) and not safe for battery.